Re: [PATCH v15 5/5] checkout -m: autostash when switching branches
- From
- Phillip Wood <phillip.wood123@gmail.com>
- Date
- Apr 28, 2026, 09:35 UTC
- Message-ID
- <88a89e06-5223-4a6f-8f9e-66e72b632ee2@gmail.com>
- In-Reply-To
- <96b14db827e51966aceb6513f7d16ed526274ec2.1777065012.git.gitgitgadget@gmail.com>
Hi Harald
On 24/04/2026 22:10, Harald Nordgren via GitGitGadget wrote:
Show 18 quoted lines
> From: Harald Nordgren <haraldnordgren@gmail.com> > > When switching branches with "git checkout -m", the attempted merge > of local modifications may cause conflicts with the changes made on > the other branch, which the user may not want to (or may not be able > to) resolve right now. Because there is no easy way to recover from > this situation, we discouraged users from using "checkout -m" unless > they are certain their changes are trivial and within their ability > to resolve conflicts. > > Teach the -m flow to create a temporary stash before switching and > reapply it after. On success, the stash is silently applied and > the list of locally modified paths is shown, same as a successful > "git checkout" without "-m". > > If reapplying causes conflicts, the stash is kept and the user is > told they can resolve and run "git stash drop", or run "git reset > --hard" and later "git stash pop" to recover their changes.
This is looking good, there are just a few small issues. Hopefully the next iteration will be the last.
Show 54 quoted lines
> Signed-off-by: Harald Nordgren <haraldnordgren@gmail.com> > --- > Documentation/git-checkout.adoc | 58 ++++++------ > Documentation/git-switch.adoc | 33 +++---- > builtin/checkout.c | 160 ++++++++++++++------------------ > sequencer.c | 14 ++- > t/t3420-rebase-autostash.sh | 16 ++-- > t/t7201-co.sh | 61 +++++++++++- > t/t7600-merge.sh | 3 +- > xdiff-interface.c | 12 +++ > xdiff-interface.h | 1 + > 9 files changed, 211 insertions(+), 147 deletions(-) > > diff --git a/Documentation/git-checkout.adoc b/Documentation/git-checkout.adoc > index 43ccf47cf6..70dd211ee3 100644 > --- a/Documentation/git-checkout.adoc > +++ b/Documentation/git-checkout.adoc > @@ -251,20 +251,19 @@ working tree, by copying them from elsewhere, extracting a tarball, etc. > are different between the current branch and the branch to > which you are switching, the command refuses to switch > branches in order to preserve your modifications in context. > - However, with this option, a three-way merge between the current > - branch, your working tree contents, and the new branch > - is done, and you will be on the new branch. > -+ > -When a merge conflict happens, the index entries for conflicting > -paths are left unmerged, and you need to resolve the conflicts > -and mark the resolved paths with `git add` (or `git rm` if the merge > -should result in deletion of the path). > + With this option, the conflicting local changes are > + automatically stashed before the switch and reapplied > + afterwards. If the local changes do not overlap with the > + differences between branches, the switch proceeds without > + stashing. If reapplying the stash results in conflicts, the > + entry is saved to the stash list. Resolve the conflicts > + and run `git stash drop` when done, or clear the working > + tree (e.g. with `git reset --hard`) before running `git stash > + pop` later to re-apply your changes. > + > When checking out paths from the index, this option lets you recreate > the conflicted merge in the specified paths. This option cannot be > used when checking out paths from a tree-ish. > -+ > -When switching branches with `--merge`, staged changes may be lost. > > `--conflict=<style>`:: > The same as `--merge` option above, but changes the way the > @@ -578,39 +577,44 @@ $ git checkout mytopic > error: You have local changes to 'frotz'; not switching branches. > ------------ > > -You can give the `-m` flag to the command, which would try a > -three-way merge: > +You can give the `-m` flag to the command, which would carry your local
s/would/will/ or s/would carry/carries/
Show 11 quoted lines
> +changes to the new branch: > > ------------ > $ git checkout -m mytopic > -Auto-merging frotz > +Switched to branch 'mytopic' > ------------ > > -After this three-way merge, the local modifications are _not_ > +After the switch, the local modifications are reapplied and are _not_ > registered in your index file,
We don't test this but we do test that "git stash apply" does not update the index so we should be fine.
Show 10 quoted lines
> so `git diff` would show you what > changes you made since the tip of the new branch. > > === 3. Merge conflict > > -When a merge conflict happens during switching branches with > -the `-m` option, you would see something like this: > +When the `--merge` (`-m`) option is in effect and the locally > +modified files overlap with files that need to be updated by the > +branch switch,
It is the changes in the files overlapping that causes the merge conflict, not the files overlapping
When the `--merge` (`-m`) option is given and the local changes overlap with the changes in the branch we're switching to,
> the changes are stashed and reapplied after the > +switch. If this process results in conflicts, a stash entry is saved
s/a/the/
> +and made available in `git stash list`:
I'd drop this line and say instead "a message is printed"
Show 19 quoted lines
> ------------ > $ git checkout -m mytopic > -Auto-merging frotz > -ERROR: Merge conflict in frotz > -fatal: merge program failed > ------------- > +Your local changes are stashed, however, applying it to carry > +forward your local changes resulted in conflicts: > > -At this point, `git diff` shows the changes cleanly merged as in > -the previous example, as well as the changes in the conflicted > -files. Edit and resolve the conflict and mark it resolved with > -`git add` as usual: > + - You can try resolving them now. If you resolved them > + successfully, discard the stash entry with "git stash drop". > > + - Alternatively you can "git reset --hard" if you do not want > + to deal with them right now, and later "git stash pop" to > + recover your local changes.
This needs updating to match the new conflict advice.
Show 10 quoted lines
> ------------ > -$ edit frotz > -$ git add frotz > ------------- > + > +You can try resolving the conflicts now. Edit the conflicting files > +and mark them resolved with `git add` as usual, then run `git stash > +drop` to discard the stash entry. Alternatively, you can clear the > +working tree with `git reset --hard` and recover your local changes > +later with `git stash pop`.
Is this documentation, or program output?
If you've not done so already it would be well worth checking the generated git-checkout.html and the man page
Show 46 quoted lines
> CONFIGURATION > ------------- > diff --git a/Documentation/git-switch.adoc b/Documentation/git-switch.adoc > index 87707e9265..ee58a4d0fd 100644 > --- a/Documentation/git-switch.adoc > +++ b/Documentation/git-switch.adoc > @@ -123,18 +123,19 @@ variable. > > `-m`:: > `--merge`:: > - If you have local modifications to one or more files that are > - different between the current branch and the branch to which > - you are switching, the command refuses to switch branches in > - order to preserve your modifications in context. However, > - with this option, a three-way merge between the current > - branch, your working tree contents, and the new branch is > - done, and you will be on the new branch. > -+ > -When a merge conflict happens, the index entries for conflicting > -paths are left unmerged, and you need to resolve the conflicts > -and mark the resolved paths with `git add` (or `git rm` if the merge > -should result in deletion of the path). > + If you have local modifications to one or more files that > + are different between the current branch and the branch to > + which you are switching, the command normally refuses to > + switch branches in order to preserve your modifications in > + context. However, with this option, the conflicting local > + changes are automatically stashed before the switch and > + reapplied afterwards. If the local changes do not overlap > + with the differences between branches, the switch proceeds > + without stashing. If reapplying the stash results in > + conflicts, the entry is saved to the stash list. Resolve > + the conflicts and run `git stash drop` when done, or clear > + the working tree (e.g. with `git reset --hard`) before > + running `git stash pop` later to re-apply your changes. > > `--conflict=<style>`:: > The same as `--merge` option above, but changes the way the > @@ -217,15 +218,15 @@ $ git switch mytopic > error: You have local changes to 'frotz'; not switching branches. > ------------ > > -You can give the `-m` flag to the command, which would try a three-way > -merge: > +You can give the `-m` flag to the command, which would carry your local > +changes to the new branch:
Same comment as for git-checkout.adoc
> ------------ > $ git switch -m mytopic > -Auto-merging frotz > +Switched to branch 'mytopic'
Don't we show the modified files as well now?
Show 14 quoted lines
> ------------ > > -After this three-way merge, the local modifications are _not_ > +After the switch, the local modifications are reapplied and are _not_ > registered in your index file, so `git diff` would show you what > changes you made since the tip of the new branch. > > diff --git a/builtin/checkout.c b/builtin/checkout.c > @@ -755,7 +757,7 @@ static void setup_branch_path(struct branch_info *branch) > > static void init_topts(struct unpack_trees_options *topts, int merge, > int show_progress, int overwrite_ignore, > - struct commit *old_commit) > + struct commit *old_commit, bool show_unpack_errors)
As this function only sets up the flags for unpack_trees() I think we could call this "quiet" or "show_errors"
Show 9 quoted lines
> {
> memset(topts, 0, sizeof(*topts));
> topts->head_idx = -1;
> @@ -767,7 +769,7 @@ static void init_topts(struct unpack_trees_options *topts, int merge,
> topts->initial_checkout = is_index_unborn(the_repository->index);
> topts->update = 1;
> topts->merge = 1;
> - topts->quiet = merge && old_commit;
> + topts->quiet = merge && old_commit && !show_unpack_errors;We've added a function parameter for this option but then we ignore it unless "merge" and "old_commit" are true which is confusing. The reason we used to check those was to set "quiet" automatically but we can't do that now, so why not just use the value the call requested?
Show 9 quoted lines
> topts->verbose_update = show_progress; > topts->fn = twoway_merge; > topts->preserve_ignored = !overwrite_ignore; > @@ -776,7 +778,8 @@ static void init_topts(struct unpack_trees_options *topts, int merge, > static int merge_working_tree(const struct checkout_opts *opts, > struct branch_info *old_branch_info, > struct branch_info *new_branch_info, > - int *writeout_error) > + int *writeout_error,
This is an "out" parameter, so it would make sense to keep it at the end of the parameter list.
Show 9 quoted lines
> + bool show_unpack_errors)
> {
> @@ -853,90 +857,8 @@ static int merge_working_tree(const struct checkout_opts *opts,
> ret = unpack_trees(2, trees, &topts);
> clear_unpack_trees_porcelain(&topts);
> if (ret == -1) {
> [...]
> + rollback_lock_file(&lock_file);
> + return MERGE_WORKING_TREE_UNPACK_FAILED;We now use a unique return value when unpack_trees() fails - good.
Show 23 quoted lines
> }
> }
>
> @@ -1181,6 +1103,10 @@ static int switch_branches(const struct checkout_opts *opts,
> struct object_id rev;
> int flag, writeout_error = 0;
> int do_merge = 1;
> + int created_autostash = 0;
> + struct strbuf old_commit_shortname = STRBUF_INIT;
> + struct strbuf autostash_msg = STRBUF_INIT;
> + const char *stash_label_base = NULL;
>
> trace2_cmd_mode("branch");
>
> @@ -1218,11 +1144,49 @@ static int switch_branches(const struct checkout_opts *opts,
> [...]
> if (do_merge) {
> - ret = merge_working_tree(opts, &old_branch_info, new_branch_info, &writeout_error);
> + ret = merge_working_tree(opts, &old_branch_info, new_branch_info,
> + &writeout_error, false);
> + if (ret == MERGE_WORKING_TREE_UNPACK_FAILED && opts->merge) {
> + strbuf_addf(&autostash_msg,
> + "autostash while switching to '%s'",In an ideal world we'd create a message that said
On <new branch>: autostash while switching from '<old branch>'
However I as discussed on patch 3, that would require us to be able to override the branch name when creating a stash as that's where the "On <branch>: " prefix gets added.
Show 23 quoted lines
> + new_branch_info->name);
> + create_autostash_ref(the_repository,
> + "CHECKOUT_AUTOSTASH_HEAD",
> + autostash_msg.buf, true);
> + created_autostash = 1;
> + ret = merge_working_tree(opts, &old_branch_info, new_branch_info,
> + &writeout_error, true);
> + }
> + if (created_autostash) {
> + if (opts->conflict_style >= 0) {
> + struct strbuf cfg = STRBUF_INIT;
> + strbuf_addf(&cfg, "merge.conflictStyle=%s",
> + conflict_style_name(opts->conflict_style));
> + git_config_push_parameter(cfg.buf);
> + strbuf_release(&cfg);
> + }
> + apply_autostash_ref(the_repository,
> + "CHECKOUT_AUTOSTASH_HEAD",
> + new_branch_info->name,
> + "local",
> + stash_label_base,
> + autostash_msg.buf);
> + }We now have a single place where we restore the stashed changes - good
Show 27 quoted lines
> diff --git a/sequencer.c b/sequencer.c
> index 7c0376d9e4..746f85a442 100644
> --- a/sequencer.c
> +++ b/sequencer.c
> @@ -4765,15 +4765,19 @@ static int apply_save_autostash_oid(const char *stash_oid, int attempt_apply,
> strvec_push(&store.args, stash_oid);
> if (run_command(&store))
> ret = error(_("cannot store %s"), stash_oid);
> + else if (attempt_apply)
> + fprintf(stderr,
> + _("Your local changes are stashed, however applying them\n"
> + "resulted in conflicts. You can either resolve the conflicts\n"
> + "and then discard the stash with \"git stash drop\", or, if you\n"
> + "do not want to resolve them now, run \"git reset --hard\" and\n"
> + "apply the local changes later by running \"git stash pop\".\n"));
> else
> fprintf(stderr,
> - _("%s\n"
> + _("Autostash exists; creating a new stash entry.\n"
> "Your changes are safe in the stash.\n"
> "You can run \"git stash pop\" or"
> - " \"git stash drop\" at any time.\n"),
> - attempt_apply ?
> - _("Applying autostash resulted in conflicts.") :
> - _("Autostash exists; creating a new stash entry."));
> + " \"git stash drop\" at any time.\n"));
> }This looks good now
Show 10 quoted lines
> diff --git a/t/t7201-co.sh b/t/t7201-co.sh > index 9bcf7c0b40..b3293ead8d 100755 > --- a/t/t7201-co.sh > +++ b/t/t7201-co.sh > @@ -102,7 +102,7 @@ test_expect_success 'checkout -m with dirty tree' ' > > test "$(git symbolic-ref HEAD)" = "refs/heads/side" && > > - printf "M\t%s\n" one >expect.messages && > + printf "The following paths have local changes:\nM\t%s\n" one >expect.messages &&
To create a multi-line file it is clearer to use
cat >expect.messages <<-\EOF && The following paths have local changes: M one EOF
Show 35 quoted lines
> test_cmp expect.messages messages && > > fill "M one" "A three" "D two" >expect.main && > @@ -210,6 +210,65 @@ test_expect_success 'checkout --merge --conflict=diff3 <branch>' ' > test_cmp expect two > ' > > +test_expect_success 'checkout -m with mixed staged and unstaged changes' ' > + git checkout -f main && > + git clean -f && > + > + fill 0 x y z >same && > + git add same && > + fill 1 2 3 4 5 6 7 >one && > + git checkout -m side >actual 2>&1 && > + test_grep "Applied autostash" actual && > + fill 0 x y z >expect && > + test_cmp expect same && > + fill 1 2 3 4 5 6 7 >expect && > + test_cmp expect one > +' > + > +test_expect_success 'checkout -m creates a recoverable stash on conflict' ' > + git checkout -f main && > + git clean -f && > + > + fill 1 2 3 4 5 >one && > + test_must_fail git checkout side 2>stderr && > + test_grep "Your local changes" stderr && > + git checkout -m side >actual 2>&1 && > + test_grep "resulted in conflicts" actual && > + test_grep "git stash drop" actual && > + test_grep "git stash pop" actual && > + test_grep "The following paths have local changes" actual && > + git show --format=%B --diff-merges=1 refs/stash >actual &&
I've realized since I suggested this that we should be checking the reflog message as well since that's what's shown by "git stash list" so we need to run
git log -p -1 --format="%gs%n%B" -g --diff-merges=1 refs/stash >actual
> + sed /^index/d actual >actual.trimmed && > + cat >expect <<-EOF &&
and add
autostash while switching to ${SQ}side${SQ}Show 27 quoted lines
> + On main: autostash while switching to ${SQ}side${SQ}
> +
> + diff --git a/one b/one
> + --- a/one
> + +++ b/one
> + @@ -3,6 +3,3 @@
> + 3
> + 4
> + 5
> + -6
> + -7
> + -8
> + EOF
> + test_cmp expect actual.trimmed &&
> + git stash drop &&
> + git reset --hard
> +'
> +
> +test_expect_success 'checkout -m which would overwrite untracked file' '
> + git checkout -f --detach main &&
> + test_commit another-file &&
> + git checkout HEAD^ &&
> + >another-file.t &&
> + fill 1 2 3 4 5 >one &&
> + test_must_fail git checkout -m @{-1} 2>err &&
> + test_grep "would be overwritten by checkout" err &&
> + test_grep "another-file.t" errWhy the two calls to test_grep, rather than one? Anyway I've realized since I suggested this test that we also need to check the message only appears once to prevent a regression where merge_working_tree() calls unpack_trees() without setting "quiet" the first time it is called. We can do that by writing an expect file and calling test_cmp(), or by using "test_line_count = 1 err"
Hopefully the next re-roll with be the final one
Thanks
Phillip
Show 54 quoted lines
> +'
> +
> test_expect_success 'switch to another branch while carrying a deletion' '
> git checkout -f main &&
> git reset --hard &&
> diff --git a/t/t7600-merge.sh b/t/t7600-merge.sh
> index 9838094b66..f877d9a433 100755
> --- a/t/t7600-merge.sh
> +++ b/t/t7600-merge.sh
> @@ -914,7 +914,8 @@ test_expect_success 'merge with conflicted --autostash changes' '
> git diff >expect &&
> test_when_finished "test_might_fail git stash drop" &&
> git merge --autostash c3 2>err &&
> - test_grep "Applying autostash resulted in conflicts." err &&
> + test_grep "applying them" err &&
> + test_grep "resulted in conflicts" err &&
> git show HEAD:file >merge-result &&
> test_cmp result.1-9 merge-result &&
> git stash show -p >actual &&
> diff --git a/xdiff-interface.c b/xdiff-interface.c
> index f043330f2a..5ee2b96d0a 100644
> --- a/xdiff-interface.c
> +++ b/xdiff-interface.c
> @@ -325,6 +325,18 @@ int parse_conflict_style_name(const char *value)
> return -1;
> }
>
> +const char *conflict_style_name(int style)
> +{
> + switch (style) {
> + case XDL_MERGE_DIFF3:
> + return "diff3";
> + case XDL_MERGE_ZEALOUS_DIFF3:
> + return "zdiff3";
> + default:
> + return "merge";
> + }
> +}
> +
> int git_xmerge_style = -1;
>
> int git_xmerge_config(const char *var, const char *value,
> diff --git a/xdiff-interface.h b/xdiff-interface.h
> index fbc4ceec40..ce54e1c0e0 100644
> --- a/xdiff-interface.h
> +++ b/xdiff-interface.h
> @@ -55,6 +55,7 @@ void xdiff_set_find_func(xdemitconf_t *xecfg, const char *line, int cflags);
> void xdiff_clear_find_func(xdemitconf_t *xecfg);
> struct config_context;
> int parse_conflict_style_name(const char *value);
> +const char *conflict_style_name(int style);
> int git_xmerge_config(const char *var, const char *value,
> const struct config_context *ctx, void *cb);
> extern int git_xmerge_style;