git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH v3 4/4] unpack-trees: cheaper index update when walking by cache-tree

From
Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Date
Aug 4, 2018, 05:37 UTC
Message-ID
<20180804053723.4695-5-pclouds@gmail.com>
In-Reply-To
<20180804053723.4695-1-pclouds@gmail.com>

With the new cache-tree, we could mostly avoid I/O (due to odb access) the code mostly becomes a loop of "check this, check that, add the entry to the index". We could skip a couple checks in this giant loop to go faster:

- We know here that we're copying entries from the source index to the
  result one. All paths in the source index must have been validated
  at load time already (and we're not taking strange paths from tree
  objects) which means we can skip verify_path() without compromise.
- We also know that D/F conflicts can't happen for all these entries
  (since cache-tree and all the trees are the same) so we can skip
  that as well.

This gives rather nice speedups for "unpack trees" rows where "unpack trees" time is now cut in half compared to when traverse_by_cache_tree() is added, or 1/7 of the original "unpack trees" time.

   baseline      cache-tree    this patch
 --------------------------------------------------------------------
   0.018239226   0.019365414   0.020519621 s: read cache .git/index
   0.052541655   0.049605548   0.048814384 s: preload index
   0.001537598   0.001571695   0.001575382 s: refresh index
   0.168167768   0.049677212   0.024719308 s: unpack trees
   0.002897186   0.002845256   0.002805555 s: update worktree after a merge
   0.131661745   0.136597522   0.134891617 s: repair cache-tree
   0.075389117   0.075422517   0.074832291 s: write index, changed mask = 2a
   0.111702023   0.032813253   0.008616479 s: unpack trees
   0.000023245   0.000022002   0.000026630 s: update worktree after a merge
   0.111793866   0.032933140   0.008714071 s: diff-index
   0.587933288   0.398924370   0.380452871 s: git command: /home/pclouds/w/git/git

Total saving of this new patch looks even less impressive, now that time spent in unpacking trees is so small. Which is why the next attempt should be on that "repair cache-tree" line.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
---
 cache.h        |  1 +
 read-cache.c   |  3 ++-
 unpack-trees.c | 20 ++++++++++++++++++++
 unpack-trees.h |  1 +
 4 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/cache.h b/cache.h
index 8b447652a7..e6f7ee4b64 100644
--- a/cache.h
+++ b/cache.h
@@ -673,6 +673,7 @@ extern int index_name_pos(const struct index_state *, const char *name, int name
 #define ADD_CACHE_JUST_APPEND 8		/* Append only; tree.c::read_tree() */
 #define ADD_CACHE_NEW_ONLY 16		/* Do not replace existing ones */
 #define ADD_CACHE_KEEP_CACHE_TREE 32	/* Do not invalidate cache-tree */
+#define ADD_CACHE_SKIP_VERIFY_PATH 64	/* Do not verify path */
 extern int add_index_entry(struct index_state *, struct cache_entry *ce, int option);
 extern void rename_index_entry_at(struct index_state *, int pos, const char *new_name);
 
diff --git a/read-cache.c b/read-cache.c
index e865254bea..b0b5df5de7 100644
--- a/read-cache.c
+++ b/read-cache.c
@@ -1170,6 +1170,7 @@ static int add_index_entry_with_check(struct index_state *istate, struct cache_e
 	int ok_to_add = option & ADD_CACHE_OK_TO_ADD;
 	int ok_to_replace = option & ADD_CACHE_OK_TO_REPLACE;
 	int skip_df_check = option & ADD_CACHE_SKIP_DFCHECK;
+	int skip_verify_path = option & ADD_CACHE_SKIP_VERIFY_PATH;
 	int new_only = option & ADD_CACHE_NEW_ONLY;
 
 	if (!(option & ADD_CACHE_KEEP_CACHE_TREE))
@@ -1210,7 +1211,7 @@ static int add_index_entry_with_check(struct index_state *istate, struct cache_e
 
 	if (!ok_to_add)
 		return -1;
-	if (!verify_path(ce->name, ce->ce_mode))
+	if (!skip_verify_path && !verify_path(ce->name, ce->ce_mode))
 		return error("Invalid path '%s'", ce->name);
 
 	if (!skip_df_check &&
diff --git a/unpack-trees.c b/unpack-trees.c
index c8defc2015..1438ee1555 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -201,6 +201,7 @@ static int do_add_entry(struct unpack_trees_options *o, struct cache_entry *ce,
 
 	ce->ce_flags = (ce->ce_flags & ~clear) | set;
 	return add_index_entry(&o->result, ce,
+			       o->extra_add_index_flags |
 			       ADD_CACHE_OK_TO_ADD | ADD_CACHE_OK_TO_REPLACE);
 }
 
@@ -701,6 +702,24 @@ static int traverse_by_cache_tree(int pos, int nr_entries, int nr_names,
 	if (!o->merge)
 		BUG("We need cache-tree to do this optimization");
 
+	/*
+	 * Try to keep add_index_entry() as fast as possible since
+	 * we're going to do a lot of them.
+	 *
+	 * Skipping verify_path() should totally be safe because these
+	 * paths are from the source index, which must have been
+	 * verified.
+	 *
+	 * Skipping D/F and cache-tree validation checks is trickier
+	 * because it assumes what n-merge code would do when all
+	 * trees and the index are the same. We probably could just
+	 * optimize those code instead (e.g. we don't invalidate that
+	 * many cache-tree, but the searching for them is very
+	 * expensive).
+	 */
+	o->extra_add_index_flags = ADD_CACHE_SKIP_DFCHECK;
+	o->extra_add_index_flags |= ADD_CACHE_SKIP_VERIFY_PATH;
+
 	/*
 	 * Do what unpack_callback() and unpack_nondirectories() normally
 	 * do. But we walk all paths recursively in just one loop instead.
@@ -742,6 +761,7 @@ static int traverse_by_cache_tree(int pos, int nr_entries, int nr_names,
 
 		mark_ce_used(src[0], o);
 	}
+	o->extra_add_index_flags = 0;
 	free(tree_ce);
 	if (o->debug_unpack)
 		printf("Unpacked %d entries from %s to %s using cache-tree\n",
diff --git a/unpack-trees.h b/unpack-trees.h
index c2b434c606..94e1b14078 100644
--- a/unpack-trees.h
+++ b/unpack-trees.h
@@ -80,6 +80,7 @@ struct unpack_trees_options {
 	struct index_state result;
 
 	struct exclude_list *el; /* for internal use */
+	unsigned int extra_add_index_flags;
 };
 
 extern int unpack_trees(unsigned n, struct tree_desc *t,
-- 
2.18.0.656.gda699b98b3
Previous: Elijah NewrenNext: Junio C Hamano
Message 57 of 121 in “[RFC] Speeding up checkout (and merge, rebase, etc)”
  1. 0/3 [RFC] Speeding up checkout (and merge, rebase, etc)Ben Peart, Jul 18, 2018
  2. 1/3 add unbounded Multi-Producer-Multi-Consumer queueBen Peart, Jul 18, 2018
  3. Stefan BellerJul 18, 2018
  4. Junio C HamanoJul 19, 2018
  5. 2/3 add performance tracing around traverse_trees() in unpack_trees()Ben Peart, Jul 18, 2018
  6. 3/3 Add initial parallel version of unpack_trees()Ben Peart, Jul 18, 2018
  7. Junio C HamanoJul 18, 2018
  8. Stefan BellerJul 18, 2018
  9. Jeff KingJul 18, 2018
  10. Ben PeartJul 23, 2018
  11. Duy NguyenJul 23, 2018
  12. Ben PeartJul 23, 2018
  13. Jeff KingJul 24, 2018
  14. Duy NguyenJul 24, 2018
  15. Ben PeartJul 25, 2018
  16. Duy NguyenJul 26, 2018
  17. Duy NguyenJul 26, 2018
  18. Junio C HamanoJul 26, 2018
  19. Duy NguyenJul 27, 2018
  20. Ben PeartJul 27, 2018
  21. Duy NguyenJul 27, 2018
  22. Junio C HamanoJul 27, 2018
  23. Duy NguyenJul 27, 2018
  24. Duy NguyenJul 29, 2018
  25. 0/4 Speed up unpack_trees()Nguyễn Thái Ngọc Duy, Jul 29, 2018
  26. 1/4 unpack-trees.c: add performance tracingNguyễn Thái Ngọc Duy, Jul 29, 2018
  27. Ben PeartJul 30, 2018
  28. 2/4 unpack-trees: optimize walking same trees with cache-treeNguyễn Thái Ngọc Duy, Jul 29, 2018
  29. Ben PeartJul 30, 2018
  30. 3/4 unpack-trees: reduce malloc in cache-tree walkNguyễn Thái Ngọc Duy, Jul 29, 2018
  31. Ben PeartJul 30, 2018
  32. 4/4 unpack-trees: cheaper index update when walking by cache-treeNguyễn Thái Ngọc Duy, Jul 29, 2018
  33. Elijah NewrenAug 8, 2018
  34. Duy NguyenAug 10, 2018
  35. Elijah NewrenAug 10, 2018
  36. Duy NguyenAug 10, 2018
  37. Elijah NewrenAug 10, 2018
  38. Duy NguyenAug 10, 2018
  39. Ben PeartJul 30, 2018
  40. Duy NguyenJul 31, 2018
  41. Ben PeartJul 31, 2018
  42. Ben PeartJul 31, 2018
  43. Duy NguyenAug 1, 2018
  44. Ben PeartAug 8, 2018
  45. Ben PeartAug 9, 2018
  46. Duy NguyenAug 10, 2018
  47. Duy NguyenAug 10, 2018
  48. Ben PeartJul 30, 2018
  49. 0/4 Speed up unpack_trees()Nguyễn Thái Ngọc Duy, Aug 4, 2018
  50. 1/4 unpack-trees: add performance tracingNguyễn Thái Ngọc Duy, Aug 4, 2018
  51. 2/4 unpack-trees: optimize walking same trees with cache-treeNguyễn Thái Ngọc Duy, Aug 4, 2018
  52. Elijah NewrenAug 8, 2018
  53. Duy NguyenAug 10, 2018
  54. Elijah NewrenAug 10, 2018
  55. 3/4 unpack-trees: reduce malloc in cache-tree walkNguyễn Thái Ngọc Duy, Aug 4, 2018
  56. Elijah NewrenAug 8, 2018
  57. 4/4 unpack-trees: cheaper index update when walking by cache-treeNguyễn Thái Ngọc Duy, Aug 4, 2018
  58. Junio C HamanoAug 6, 2018
  59. Duy NguyenAug 6, 2018
  60. Junio C HamanoAug 6, 2018
  61. Ben PeartAug 8, 2018
  62. Junio C HamanoAug 8, 2018
  63. Junio C HamanoAug 8, 2018
  64. Junio C HamanoAug 8, 2018
  65. Duy NguyenAug 10, 2018
  66. 0/5 Speed up unpack_trees()Nguyễn Thái Ngọc Duy, Aug 12, 2018
  67. 3/5 unpack-trees: optimize walking same trees with cache-treeNguyễn Thái Ngọc Duy, Aug 12, 2018
  68. Ben PeartAug 13, 2018
  69. Duy NguyenAug 15, 2018
  70. 1/5 trace.h: support nested performance tracingNguyễn Thái Ngọc Duy, Aug 12, 2018
  71. Ben PeartAug 13, 2018
  72. 2/5 unpack-trees: add performance tracingNguyễn Thái Ngọc Duy, Aug 12, 2018
  73. Thomas AdamAug 12, 2018
  74. Junio C HamanoAug 13, 2018
  75. Ben PeartAug 13, 2018
  76. Jeff KingAug 13, 2018
  77. Stefan BellerAug 13, 2018
  78. Ben PeartAug 13, 2018
  79. Duy NguyenAug 13, 2018
  80. Jeff KingAug 13, 2018
  81. Junio C HamanoAug 13, 2018
  82. Jeff HostetlerAug 14, 2018
  83. Duy NguyenAug 14, 2018
  84. Stefan BellerAug 14, 2018
  85. Duy NguyenAug 14, 2018
  86. Jeff KingAug 14, 2018
  87. Junio C HamanoAug 14, 2018
  88. Duy NguyenAug 15, 2018
  89. Junio C HamanoAug 15, 2018
  90. Jeff HostetlerAug 14, 2018
  91. 4/5 unpack-trees: reduce malloc in cache-tree walkNguyễn Thái Ngọc Duy, Aug 12, 2018
  92. 5/5 unpack-trees: reuse (still valid) cache-tree from src_indexNguyễn Thái Ngọc Duy, Aug 12, 2018
  93. Elijah NewrenAug 13, 2018
  94. Duy NguyenAug 13, 2018
  95. Ben PeartAug 13, 2018
  96. Duy NguyenAug 13, 2018
  97. Ben PeartAug 13, 2018
  98. Junio C HamanoAug 13, 2018
  99. Ben PeartAug 14, 2018
  100. 0/7 Speed up unpack_trees()Nguyễn Thái Ngọc Duy, Aug 18, 2018
  101. 1/7 trace.h: support nested performance tracingNguyễn Thái Ngọc Duy, Aug 18, 2018
  102. 2/7 unpack-trees: add performance tracingNguyễn Thái Ngọc Duy, Aug 18, 2018
  103. 3/7 unpack-trees: optimize walking same trees with cache-treeNguyễn Thái Ngọc Duy, Aug 18, 2018
  104. Ben PeartAug 20, 2018
  105. 5/7 unpack-trees: reuse (still valid) cache-tree from src_indexNguyễn Thái Ngọc Duy, Aug 18, 2018
  106. 6/7 unpack-trees: add missing cache invalidationNguyễn Thái Ngọc Duy, Aug 18, 2018
  107. 4/7 unpack-trees: reduce malloc in cache-tree walkNguyễn Thái Ngọc Duy, Aug 18, 2018
  108. 7/7 cache-tree: verify valid cache-tree in the test suiteNguyễn Thái Ngọc Duy, Aug 18, 2018
  109. Elijah NewrenAug 18, 2018
  110. Elijah NewrenAug 18, 2018
  111. Duy NguyenAug 19, 2018
  112. Document update for nd/unpack-trees-with-cache-treeNguyễn Thái Ngọc Duy, Aug 25, 2018
  113. Martin ÅgrenAug 25, 2018
  114. Document update for nd/unpack-trees-with-cache-treeNguyễn Thái Ngọc Duy, Aug 25, 2018
  115. Ben PeartJul 27, 2018
  116. Duy NguyenJul 26, 2018
  117. Junio C HamanoJul 24, 2018
  118. Duy NguyenJul 24, 2018
  119. Jeff KingJul 24, 2018
  120. Ben PeartJul 25, 2018
  121. Jeff KingJul 24, 2018

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.