git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCHv3 8/9] send-pack/receive-pack: Allow server to refuse pushing too large packs

From
Johan Herland <johan@herland.net>
Date
May 15, 2011, 21:37 UTC
Message-ID
<1305495440-30836-9-git-send-email-johan@herland.net>
In-Reply-To
<1305495440-30836-1-git-send-email-johan@herland.net>

Add a new receive.packSizeLimit config variable which defines an upper limit on the pack size to accept in a single push.

This limit is advertised to clients, using the new "limit-pack-size=<num>" capability. The client side - aka. send-pack - parses this capability and forwards it to pack-objects, using the --max-pack-size option. pack-objects then checks the generated pack against the limit and aborts the pack transmission if the pack becomes too large.

However, older clients that do not understand the capability will not check their pack against the limit, and will end up pushing the pack to the server. Currently there is no extra check on the server to detect a push that exceeds receive.packSizeLimit. However, such a check could be done in a pre-receive or update hook.

Documentation and tests are included.
Signed-off-by: Johan Herland <johan@herland.net>
---
 Documentation/config.txt                          |    9 +++
 Documentation/technical/protocol-capabilities.txt |    1 +
 builtin/receive-pack.c                            |   10 +++-
 builtin/send-pack.c                               |   14 ++++-
 send-pack.h                                       |    1 +
 t/t5400-send-pack.sh                              |   62 +++++++++++++++++++++
 6 files changed, 93 insertions(+), 4 deletions(-)
diff --git a/Documentation/config.txt b/Documentation/config.txt
index fd6c130..acc1ef2 100644
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -1599,6 +1599,15 @@ receive.unpackLimit::
 	especially on slow filesystems.  If not set, the value of
 	`transfer.unpackLimit` is used instead.
 
+receive.packSizeLimit::
+	If the pack file transferred in a push exceeds this limit,
+	then the entire push will be refused. This is meant to prevent
+	an unintended large push (typically a result of the user not
+	being aware of exactly what is being pushed, e.g. pushing a
+	large rewritten history) from entering the repo. If not set,
+	there is no upper limit on the size of the pack transferred
+	in a single push.
+
 receive.objectCountLimit::
 	If the number of objects received in a push exceeds this limit,
 	then the entire push will be refused. This is meant to prevent
diff --git a/Documentation/technical/protocol-capabilities.txt b/Documentation/technical/protocol-capabilities.txt
index aac66af..d3921a9 100644
--- a/Documentation/technical/protocol-capabilities.txt
+++ b/Documentation/technical/protocol-capabilities.txt
@@ -205,6 +205,7 @@ the server. If the check fails, the client must abort the upload, and
 report the reason for the aborted push back to the user.
 The following "limit-*" capabilites are recognized:
 
+ - limit-pack-size=<num>    (Maximum size (in bytes) of uploaded pack)
  - limit-object-count=<num> (Maximum number of objects in a pack)
 
 More "limit-*" capabilities may be added in the future. The client
diff --git a/builtin/receive-pack.c b/builtin/receive-pack.c
index d919e17..97c154b 100644
--- a/builtin/receive-pack.c
+++ b/builtin/receive-pack.c
@@ -28,7 +28,7 @@ static int receive_fsck_objects;
 static int receive_unpack_limit = -1;
 static int transfer_unpack_limit = -1;
 static int unpack_limit = 100;
-static unsigned long limit_object_count;
+static unsigned long limit_pack_size, limit_object_count;
 static int report_status;
 static int use_sideband;
 static int prefer_ofs_delta = 1;
@@ -74,6 +74,11 @@ static int receive_pack_config(const char *var, const char *value, void *cb)
 		return 0;
 	}
 
+	if (strcmp(var, "receive.packsizelimit") == 0) {
+		limit_pack_size = git_config_ulong(var, value);
+		return 0;
+	}
+
 	if (strcmp(var, "receive.objectcountlimit") == 0) {
 		limit_object_count = git_config_ulong(var, value);
 		return 0;
@@ -118,6 +123,9 @@ static const char *capabilities()
 	int ret = snprintf(buf, sizeof(buf),
 			   " report-status delete-refs side-band-64k%s",
 			   prefer_ofs_delta ? " ofs-delta" : "");
+	if (limit_pack_size > 0)
+		ret += snprintf(buf + ret, sizeof(buf) - ret,
+				" limit-pack-size=%lu", limit_pack_size);
 	if (limit_object_count > 0)
 		ret += snprintf(buf + ret, sizeof(buf) - ret,
 				" limit-object-count=%lu", limit_object_count);
diff --git a/builtin/send-pack.c b/builtin/send-pack.c
index 4103116..e7c82ce 100644
--- a/builtin/send-pack.c
+++ b/builtin/send-pack.c
@@ -50,10 +50,11 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext
 		NULL,
 		NULL,
 		NULL,
+		NULL,
 	};
 	struct child_process po;
 	int i;
-	char buf[40];
+	char buf1[40], buf2[40];
 
 	i = 4;
 	if (args->use_thin_pack)
@@ -64,10 +65,15 @@ static int pack_objects(int fd, struct ref *refs, struct extra_have_objects *ext
 		argv[i++] = "-q";
 	if (args->progress)
 		argv[i++] = "--progress";
+	if (args->max_pack_size > 0) {
+		snprintf(buf1, sizeof(buf1), "--max-pack-size=%lu",
+			 args->max_pack_size);
+		argv[i++] = buf1;
+	}
 	if (args->max_object_count > 0) {
-		snprintf(buf, sizeof(buf), "--max-object-count=%lu",
+		snprintf(buf2, sizeof(buf2), "--max-object-count=%lu",
 			 args->max_object_count);
-		argv[i++] = buf;
+		argv[i++] = buf2;
 	}
 	memset(&po, 0, sizeof(po));
 	po.argv = argv;
@@ -271,6 +277,8 @@ int send_pack(struct send_pack_args *args,
 		args->use_ofs_delta = 1;
 	if (server_supports("side-band-64k"))
 		use_sideband = 1;
+	if ((p = server_supports("limit-pack-size=")))
+		args->max_pack_size = strtoul(p + 16, NULL, 10);
 	if ((p = server_supports("limit-object-count=")))
 		args->max_object_count = strtoul(p + 19, NULL, 10);
 
diff --git a/send-pack.h b/send-pack.h
index eaacb20..1c6c202 100644
--- a/send-pack.h
+++ b/send-pack.h
@@ -12,6 +12,7 @@ struct send_pack_args {
 		use_ofs_delta:1,
 		dry_run:1,
 		stateless_rpc:1;
+	unsigned long max_pack_size;
 	unsigned long max_object_count;
 };
 
diff --git a/t/t5400-send-pack.sh b/t/t5400-send-pack.sh
index f1f8f80..26fd1b4 100755
--- a/t/t5400-send-pack.sh
+++ b/t/t5400-send-pack.sh
@@ -288,4 +288,66 @@ test_expect_success 'push is allowed when object limit is not exceeded' '
 	test "$parent_head" = "$child_head"
 '
 
+test_expect_success 'verify that limit-pack-size capability is not advertised by default' '
+	rewound_push_setup &&
+	(
+	    cd parent &&
+	    test_might_fail git receive-pack . <../pkt-flush >output &&
+	    test_must_fail grep -q "limit-pack-size" output
+	)
+'
+
+test_expect_success 'verify that receive.packSizeLimit triggers limit-pack-size capability' '
+	(
+	    cd parent &&
+	    git config receive.packSizeLimit 10 &&
+	    test_might_fail git receive-pack . <../pkt-flush >output &&
+	    grep -q "limit-pack-size=10" output
+	)
+'
+
+test_expect_success 'deny pushing when receive.packSizeLimit is exceeded' '
+	(
+	    cd child &&
+	    git reset --hard origin/master &&
+	    echo three > file && git commit -a -m three &&
+	    test_must_fail git send-pack ../parent master 2>errs &&
+	    grep -q "pack size limit" errs
+	) &&
+	parent_head=$(cd parent && git rev-parse --verify master) &&
+	child_head=$(cd child && git rev-parse --verify master) &&
+	test "$parent_head" != "$child_head"
+'
+
+test_expect_success 'repeated push failure proves that objects were not stored remotely' '
+	(
+	    cd child &&
+	    test_must_fail git send-pack ../parent master 2>errs &&
+	    grep -q "pack size limit" errs
+	) &&
+	parent_head=$(cd parent && git rev-parse --verify master) &&
+	child_head=$(cd child && git rev-parse --verify master) &&
+	test "$parent_head" != "$child_head"
+'
+
+test_expect_success 'increase receive.packSizeLimit' '
+	(
+	    cd parent &&
+	    git config receive.packSizeLimit 1000000 &&
+	    test_might_fail git receive-pack . <../pkt-flush >output &&
+	    grep -q "limit-pack-size=1000000" output
+	)
+'
+
+test_expect_success 'push is allowed when pack size is not exceeded' '
+	(
+	    cd child &&
+	    git send-pack ../parent master 2>errs &&
+	    test_must_fail grep -q "pack size limit" errs
+	) &&
+	parent_head=$(cd parent && git rev-parse --verify master) &&
+	child_head=$(cd child && git rev-parse --verify master) &&
+	test "$parent_head" = "$child_head"
+'
+
 test_done

-- 
1.7.5.rc1.3.g4d7b
Previous: Johan HerlandNext: Johan Herland
Message 47 of 53 in “receive-pack: Add receive.denyObjectLimit to refuse push with too many objects”
  1. 2/2 receive-pack: Add receive.denyObjectLimit to refuse push with too many objectsJohan Herland, May 13, 2011
  2. Junio C HamanoMay 13, 2011
  3. Johan HerlandMay 14, 2011
  4. 2/2 receive-pack: Add receive.objectCountLimit to refuse push with too many objectsJohan Herland, May 14, 2011
  5. Shawn PearceMay 14, 2011
  6. Johan HerlandMay 14, 2011
  7. Shawn PearceMay 14, 2011
  8. Johan HerlandMay 15, 2011
  9. 0/9 Push limitsJohan Herland, May 15, 2011
  10. 1/9 Update technical docs to reflect side-band-64k capability in receive-packJohan Herland, May 15, 2011
  11. 2/9 send-pack: Attempt to retrieve remote status even if pack-objects failsJohan Herland, May 15, 2011
  12. Jeff KingMay 16, 2011
  13. Jeff KingMay 16, 2011
  14. Jeff KingMay 16, 2011
  15. 1/3 connect: treat generic proxy processes like ssh processesJeff King, May 16, 2011
  16. Johannes SixtMay 16, 2011
  17. Junio C HamanoMay 16, 2011
  18. Jeff KingMay 17, 2011
  19. Johannes SixtMay 17, 2011
  20. Jeff KingMay 18, 2011
  21. 2/3 connect: let callers know if connection is a socketJeff King, May 16, 2011
  22. 3/3 send-pack: avoid deadlock on git:// push with failed pack-objectsJeff King, May 16, 2011
  23. Johannes SixtMay 16, 2011
  24. Jeff KingMay 17, 2011
  25. Windows: add a wrapper for the shutdown() system callJohannes Sixt, May 18, 2011
  26. 3/9 pack-objects: Allow --max-pack-size to be used together with --stdoutJohan Herland, May 15, 2011
  27. Shawn PearceMay 15, 2011
  28. Johan HerlandMay 16, 2011
  29. Junio C HamanoMay 16, 2011
  30. Johan HerlandMay 16, 2011
  31. 4/9 pack-objects: Teach new option --max-object-count, similar to --max-pack-sizeJohan Herland, May 15, 2011
  32. Shawn PearceMay 15, 2011
  33. Johan HerlandMay 15, 2011
  34. Shawn PearceMay 15, 2011
  35. Junio C HamanoMay 16, 2011
  36. Johan HerlandMay 16, 2011
  37. 5/9 pack-objects: Teach new option --max-commit-count, limiting #commits in packJohan Herland, May 15, 2011
  38. 6/9 receive-pack: Prepare for addition of the new 'limit-*' family of capabilitiesJohan Herland, May 15, 2011
  39. Junio C HamanoMay 16, 2011
  40. Johan HerlandMay 16, 2011
  41. Sverre RabbelierMay 16, 2011
  42. Junio C HamanoMay 16, 2011
  43. Sverre RabbelierMay 16, 2011
  44. Junio C HamanoMay 16, 2011
  45. Sverre RabbelierMay 16, 2011
  46. 7/9 send-pack/receive-pack: Allow server to refuse pushes with too many objectsJohan Herland, May 15, 2011
  47. 8/9 send-pack/receive-pack: Allow server to refuse pushing too large packsJohan Herland, May 15, 2011
  48. 9/9 send-pack/receive-pack: Allow server to refuse pushes with too many commitsJohan Herland, May 15, 2011
  49. Ævar Arnfjörð BjarmasonMay 15, 2011
  50. Junio C HamanoMay 14, 2011
  51. Shawn PearceMay 14, 2011
  52. Johannes SixtMay 13, 2011
  53. Johan HerlandMay 14, 2011

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.