Re: [PATCH 01/20] sparse-index: design doc and format update

>
> From: Derrick Stolee <dstolee@microsoft.com>
>
> This begins a long effort to update the index format to allow sparse
> directory entries. This should result in a significant improvement to
> Git commands when HEAD contains millions of files, but the user has
> selected many fewer files to keep in their sparse-checkout definition.
>
> Currently, the index format is only updated in the presence of
> extensions.sparseIndex instead of increasing a file format version
> number. This is temporary, and index v5 is part of the plan for future
> work in this area.
>
> The design document details many of the reasons for embarking on this
> work, and also the plan for completing it safely.
>
> Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
> ---
>  Documentation/technical/index-format.txt |   7 +
>  Documentation/technical/sparse-index.txt | 167 +++++++++++++++++++++++
>  2 files changed, 174 insertions(+)
>  create mode 100644 Documentation/technical/sparse-index.txt
>
> diff --git a/Documentation/technical/index-format.txt b/Documentation/technical/index-format.txt
> index b633482b1bdf..387126582556 100644
> --- a/Documentation/technical/index-format.txt
> +++ b/Documentation/technical/index-format.txt
> @@ -44,6 +44,13 @@ Git index format
>    localization, no special casing of directory separator '/'). Entries
>    with the same name are sorted by their stage field.
>
> +  An index entry typically represents a file. However, if sparse-checkout
> +  is enabled in cone mode (`core.sparseCheckoutCone` is enabled) and the
> +  `extensions.sparseIndex` extension is enabled, then the index may
> +  contain entries for directories outside of the sparse-checkout definition.
> +  These entries have mode `0040000`, include the `SKIP_WORKTREE` bit, and
> +  the path ends in a directory separator.
> +
>    32-bit ctime seconds, the last time a file's metadata changed
>      this is stat(2) data
>
> diff --git a/Documentation/technical/sparse-index.txt b/Documentation/technical/sparse-index.txt
> new file mode 100644
> index 000000000000..9070836f0655
> --- /dev/null
> +++ b/Documentation/technical/sparse-index.txt
> @@ -0,0 +1,167 @@
> +Git Sparse-Index Design Document
> +================================
> +
> +The sparse-checkout feature allows users to focus a working directory on
> +a subset of the files at HEAD. The cone mode patterns, enabled by
> +`core.sparseCheckoutCone`, allow for very fast pattern matching to
> +discover which files at HEAD belong in the sparse-checkout cone.
> +
> +Three important scale dimensions for a Git worktree are:
> +
> +* `HEAD`: How many files are present at `HEAD`?
> +
> +* Populated: How many files are within the sparse-checkout cone.
> +
> +* Modified: How many files has the user modified in the working directory?
> +
> +We will use big-O notation -- O(X) -- to denote how expensive certain
> +operations are in terms of these dimensions.
> +
> +These dimensions are ordered by their magnitude: users (typically) modify
> +fewer files than are populated, and we can only populate files at `HEAD`.
> +These dimensions are also ordered by how expensive they are per item: it
> +is expensive to detect a modified file than it is to write one that we
> +know must be populated; changing `HEAD` only really requires updating the
> +index.
> +
> +Problems occur if there is an extreme imbalance in these dimensions. For
> +example, if `HEAD` contains millions of paths but the populated set has
> +only tens of thousands, then commands like `git status` and `git add` can
> +be dominated by operations that require O(`HEAD`) operations instead of
> +O(Populated). Primarily, the cost is in parsing and rewriting the index,
> +which is filled primarily with files at `HEAD` that are marked with the
> +`SKIP_WORKTREE` bit.
> +
> +The sparse-index intends to take these commands that read and modify the
> +index from O(`HEAD`) to O(Populated). To do this, we need to modify the
> +index format in a significant way: add "sparse directory" entries.
> +
> +With cone mode patterns, it is possible to detect when an entire
> +directory will have its contents outside of the sparse-checkout definition.
> +Instead of listing all of the files it contains as individual entries, a
> +sparse-index contains an entry with the directory name, referencing the
> +object ID of the tree at `HEAD` and marked with the `SKIP_WORKTREE` bit.
> +If we need to discover the details for paths within that directory, we
> +can parse trees to find that list.
> +
> +This addition of sparse-directory entries violates expectations about the

> +index format and its in-memory data structure. There are many consumers in
> +the codebase that expect to iterate through all of the index entries and
> +see only files. In addition, they expect to see all files at `HEAD`. One
> +way to handle this is to parse trees to replace a sparse-directory entry
> +with all of the files within that tree as the index is loaded. However,
> +parsing trees is slower than parsing the index format, so that is a slower
> +operation than if we left the index alone.
> +
> +The implementation plan below follows four phases to slowly integrate with
> +the sparse-index. The intention is to incrementally update Git commands to
> +interact safely with the sparse-index without significant slowdowns. This
> +may not always be possible, but the hope is that the primary commands that
> +users need in their daily work are dramatically improved.
> +
> +Phase I: Format and initial speedups
> +------------------------------------
> +
> +During this phase, Git learns to enable the sparse-index and safely parse
> +one. Protections are put in place so that every consumer of the in-memory
> +data structure can operate with its current assumption of every file at
> +`HEAD`.
> +
> +At first, every index parse will expand the sparse-directory entries into
> +the full list of paths at `HEAD`. This will be slower in all cases. The
> +only noticable change in behavior will be that the serialized index file

> +contains sparse-directory entries.
> +
> +To start, we use a new repository extension, `extensions.sparseIndex`, to
> +allow inserting sparse-directory entries into indexes with file format
> +versions 2, 3, and 4. This prevents Git versions that do not understand
> +the sparse-index from operating on one, but it also prevents other
> +operations that do not use the index at all. A new format, index v5, will
> +be introduced that includes sparse-directory entries by default. It might
> +also introduce other features that have been considered for improving the
> +index, as well.
> +
> +Next, consumers of the index will be guarded against operating on a
> +sparse-index by inserting calls to `ensure_full_index()` or
> +`expand_index_to_path()`. After these guards are in place, we can begin
> +leaving sparse-directory entries in the in-memory index structure.
> +
> +Even after inserting these guards, we will keep expanding sparse-indexes
> +for most Git commands using the `command_requires_full_index` repository
> +setting. This setting will be on by default and disabled one builtin at a
> +time until we have sufficient confidence that all of the index operations
> +are properly guarded.
> +
> +To complete this phase, the commands `git status` and `git add` will be
> +integrated with the sparse-index so that they operate with O(Populated)
> +performance. They will be carefully tested for operations within and
> +outside the sparse-checkout definition.

> +
> +Phase II: Careful integrations
> +------------------------------
> +
> +This phase focuses on ensuring that all index extensions and APIs work
> +well with a sparse-index. This requires significant increases to our test
> +coverage, especially for operations that interact with the working
> +directory outside of the sparse-checkout definition. Some of these
> +behaviors may not be the desirable ones, such as some tests already
> +marked for failure in `t1092-sparse-checkout-compatibility.sh`.
> +
> +The index extensions that may require special integrations are:
> +
> +* FS Monitor
> +* Untracked cache
> +
> +While integrating with these features, we should look for patterns that
> +might lead to better APIs for interacting with the index. Coalescing
> +common usage patterns into an API call can reduce the number of places
> +where sparse-directories need to be handled carefully.

> +Phase III: Important command speedups
> +-------------------------------------
> +
> +At this point, the patterns for testing and implementing sparse-directory
> +logic should be relatively stable. This phase focuses on updating some of
> +the most common builtins that use the index to operate as O(Populated).
> +Here is a potential list of commands that could be valuable to integrate
> +at this point:
> +
> +* `git commit`
> +* `git checkout`
> +* `git merge`
> +* `git rebase`
> +
> +Along with `git status` and `git add`, these commands cover the majority
> +of users' interactions with the working directory.

>  In addition, we can
> +integrate with these commands:
> +
> +* `git grep`
> +* `git rm`
> +
> +These have been proposed as some whose behavior could change when in a
> +repo with a sparse-checkout definition. It would be good to include this
> +behavior automatically when using a sparse-index. Some clarity is needed
> +to make the behavior switch clear to the user.

> +This phase is the first where parallel work might be possible without too
> +much conflicts between topics.
> +
> +Phase IV: The long tail
> +-----------------------
> +
> +This last phase is less a "phase" and more "the new normal" after all of
> +the previous work.
> +
> +To start, the `command_requires_full_index` option could be removed in
> +favor of expanding only when hitting an API guard.
> +
> +There are many Git commands that could use special attention to operate as
> +O(Populated), while some might be so rare that it is acceptable to leave
> +them with additional overhead when a sparse-index is present.
> +
> +Here are some commands that might be useful to update:
> +
> +* `git sparse-checkout set`
> +* `git am`
> +* `git clean`
> +* `git stash`