Re: [RFC PATCH 1/9] t3404: demonstrate that --edit-todo does not check for dropped commits

> Alban Gruin <alban.gruin@gmail.com> writes:
> > When set to "warn" or "error", `rebase.missingCommitCheck' would make
> > rebase -i warn if the user removed commits from the todo list to prevent
> > mistakes.  Unfortunately, rebase --edit-todo and rebase --continue don't
> > take it into account.
> > 
> > This adds three tests to t3404 to demonstrate this.  The first one is
> > not broken, as when `rebase.missingCommitsCheck' is not set, nothing in
> > particular must be done towards dropped commits.  The two others are
> > broken, demonstrating the problem.
> > 
> > Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
> > ---
> > 
> >  t/t3404-rebase-interactive.sh | 82 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 82 insertions(+)
> > 
> > diff --git a/t/t3404-rebase-interactive.sh b/t/t3404-rebase-interactive.sh
> > index 461dd539ff..f5c0a8d2bb 100755
> > --- a/t/t3404-rebase-interactive.sh
> > +++ b/t/t3404-rebase-interactive.sh
> > @@ -1345,6 +1345,88 @@ test_expect_success 'rebase -i respects
> > rebase.missingCommitsCheck = error' '> 
> >  	test B = $(git cat-file commit HEAD^ | sed -ne \$p)
> >  
> >  '
> > 
> > +test_expect_success 'rebase --edit-todo respects
> > rebase.missingCommitsCheck = ignore' ' +	test_config
> > rebase.missingCommitsCheck ignore &&
> > +	rebase_setup_and_clean missing-commit &&
> > +	set_fake_editor &&
> > +	test_must_fail env FAKE_LINES="1 2 bad 3 4" \
> > +		git rebase -i --root >/dev/null 2>stderr &&
> 
> Do you need to capture into stderr?  Nobody seems to use it.
> 

> > +	FAKE_LINES="1 2 4" git rebase --edit-todo &&
> > +	git rebase --continue 2>actual &&
> > +	test D = $(git cat-file commit HEAD | sed -ne \$p) &&
> > +	test_i18ngrep \
> > +		"Successfully rebased and updated refs/heads/missing-

> > +		actual
> > +'
> > +
> > +cat >expect <<EOF
> > +error: invalid line 5: badcmd $(git rev-list --pretty=oneline
> > --abbrev-commit -1 master) +Warning: some commits may have been dropped
> > accidentally.
> > +Dropped commits (newer to older):
> > + - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
> > +To avoid this message, use "drop" to explicitly remove a commit.
> > +
> > +Use 'git config rebase.missingCommitsCheck' to change the level of
> > warnings. +The possible behaviours are: ignore, warn, error.
> > +
> > +EOF
> > +
> > +tail -n 8 <expect >expect.2
> 
> Having this outside the test_expect_success block that uses the file
> is bad.  You may have mimicked other tests in the same script, but
> that is not a good excuse to make things worse.  Just make sure
> these new stuff follow the best-current-practice pattern without
> touching the existing bad examples (and later fix them up after the
> dust settles, but don't let it distract you from the theme these
> patches are addressing).
> 

> > +
> > +test_expect_failure 'rebase --edit-todo respects
> > rebase.missingCommitsCheck = warn' ' +	test_config
> > rebase.missingCommitsCheck warn &&
> > +	rebase_setup_and_clean missing-commit &&
> > +	set_fake_editor &&
> > +	test_must_fail env FAKE_LINES="1 2 3 4 bad 5" \
> > +		git rebase -i --root >/dev/null 2>stderr &&
> 
> Ditto.
> 
> > +	FAKE_LINES="1 2 3 4" git rebase --edit-todo 2>actual &&
> > +	test_i18ncmp expect actual &&
> 
> So, after "--edit-todo", you are supposed to get an error and a warning,
> but ...
> 
> > +	git rebase --continue 2>actual.2 &&
> > +	head -n 8 <actual.2 >actual &&
> > +	test_i18ncmp expect.2 actual &&
> 
> ... after "--continue", you do not get any error, as you removed
> 'bad' from the input, but you still get a warning, followed by a
> report of the fact that a commit has been dropped.  OK.
> 
> > +	test D = $(git cat-file commit HEAD | sed -ne \$p) &&
> > +	test_i18ngrep \
> > +		"Successfully rebased and updated refs/heads/missing-

> > +		actual.2
> > +'
> > +
> > +cat >expect <<EOF
> > +error: invalid line 3: badcmd $(git rev-list --pretty=oneline
> > --abbrev-commit -1 master~2) +Warning: some commits may have been dropped
> > accidentally.
> > +Dropped commits (newer to older):
> > + - $(git rev-list --pretty=oneline --abbrev-commit -1 master)
> > + - $(git rev-list --pretty=oneline --abbrev-commit -1 master~2)
> > +To avoid this message, use "drop" to explicitly remove a commit.
> > +
> > +Use 'git config rebase.missingCommitsCheck' to change the level of
> > warnings. +The possible behaviours are: ignore, warn, error.
> > +
> > +EOF
> > +
> > +tail -n 9 <expect >expect.2
> > +
> > +test_expect_failure 'rebase --edit-todo respects
> > rebase.missingCommitsCheck = error' ' +	test_config
> > rebase.missingCommitsCheck error &&
> > +	rebase_setup_and_clean missing-commit &&
> > +	set_fake_editor &&
> > +	test_must_fail env FAKE_LINES="1 2 bad 3 4" \
> > +		git rebase -i --root >/dev/null 2>stderr &&
> > +	test_must_fail env FAKE_LINES="1 2 4" \
> > +		git rebase --edit-todo 2>actual &&
> > +	test_i18ncmp expect actual &&
> > +	test_must_fail git rebase --continue 2>actual &&
> 
> OK, and this one fails as the configuration is set to 'error'.
> 
> > +	test_i18ncmp expect.2 actual &&
> > +	cp .git/rebase-merge/git-rebase-todo.backup \
> > +		.git/rebase-merge/git-rebase-todo &&
> 
> Why?  Who uses this copy?
> 

> > +	FAKE_LINES="1 2 drop 3 4 drop 5" \
> > +		git rebase --edit-todo &&
> > +	git rebase --continue 2>actual &&
> > +	test D = $(git cat-file commit HEAD | sed -ne \$p) &&
> > +	test_i18ngrep \
> > +		"Successfully rebased and updated refs/heads/missing-

> > +		actual
> > +'
> > +
> > 
> >  test_expect_success 'respects rebase.abbreviateCommands with fixup,
> >  squash and exec' '>  
> >  	rebase_setup_and_clean abbrevcmd &&
> >  	test_commit "first" file1.txt "first line" first &&