Re: [PATCH v2 3/3] Makefile: replace most hardcoded object lists with $(wildcard)

> Remove the hardcoded lists of objects in favor of using
> $(wildcard). This means that every time a built-in, test tool etc. is
> added we won't need to patch the top-level Makefile, except for the
> few remaining cases where the asset in question would make it onto one
> of our list of exceptions.
> 
> Ever since 81b50f3ce40 (Move 'builtin-*' into a 'builtin/'
> subdirectory, 2010-02-22) this has been relatively easy to do (and
> even before that we could glob builtin-*.c). This pattern of
> exhaustively enumerating files was then carried forward for
> e.g. TEST_BUILTINS_OBJS in efd71f8913a (t/helper: add an empty
> test-tool program, 2018-03-24).
> 
> One reason not to do this is that now a new *.c file at the top-level
> will be immediately picked up, so if a new *.c file is being worked on
> "make" will error if it doesn't compile, whereas before that file
> would need to be explicitly listed in the Makefile. I think than small
> trade-off is worth it.

> We could make this simpler still for the Makefile by moving
> "unix-socket.c" etc. to e.g. a "conditional-src/" directory, likewise
> for $(PROGRAM_OBJS) to e.g. "programs/". If we did that we would not
> need the "$(filter-out)" for LIB_OBJS. I don't think that's worth it,
> e.g. due to "git log -- <path>" on the files now needing a "--follow".
> 
> There's a few small "while we're at it" changes here, since I'm
> touching the code in question:
> 
>   - Start splitting up the the "Guard against the environment" section
>     at the top, but don't move anything that exists there out to avoid
>     merge conflicts
> 
>   - The $(TEST_BUILTINS_OBJS) variable was needlessly complex, because
>     it didn't have the full paths we'd pathsubst it back & forth.
> 
>   - Introduce *_SRC in addition to *_OBJ for the variable I'm
>     touching. Eventually we'll want to do this for all the *.o files,
>     i.e. make the *.c list a source of truth for *.o, which means we can
>     e.g. use that exhaustive list for "make TAGS".
> 
>   - Add a missing "curl-objs" target. See 029bac01a87 (Makefile: add
>     {program,xdiff,test,git,fuzz}-objs & objects targets, 2021-02-23)
>     for the commit that added the rest.
> 
>   - De-indent an "ifndef" block, we don't usually indent their
>     contents.
> 
> On the CMake changes here:
> 
>   - When CMake support was introduced in was introduced
>     061c2240b1b (Introduce CMake support for configuring Git, 2020-06-12)
>     there was a discussion about the maintenance burden of maintaining the
>     top-level Makefile in parallel with CMakeLists.txt[1] where reviewers
>     were assured that doing so would simply be a matter of adding something
>     to a list in the CMake recipe.
> 
>     Between change and some recent changes of mine where the "vs-build"
>     job failed to a divergence between the Makefile and CMakeList.txt I
>     can confidently say that that doesn't at all match reality. Even
>     seemingly trivial changes to the Makefile like this one are forcing
>     us to do a deep-dive into CMake internals to make forward progress
>     with our main build system.

>   - The promised "We can add a (continue-on-error) to vs-build job to
>     make this process less of a hindrance." in [2] never materialized.
>     Since 4c2c38e800f (ci: modification of main.yml to use cmake for
>     vs-build job, 2020-06-26) got a hard dependency on CMake as far as
>     getting the CI to pass goes.
> 
>   - The "vs-build" CI doesn't actually require that there be no GNU make
>     usage in the job, as it itself has a hard dependency on running a
>     "make -n artifacts-tar" command. So as far as any vs-specific special-sauce
>     goes we don't need a GNU-make free build system for vs-build.

>   - The stated goal in 061c2240b1b of avoiding a GNU make dependency
>     for developer because it requires an SDK that "occupies around two
>     gigabytes" and "three quarters of a gigabyte worth of Git objects"
>     hardly seems worthwhile trade-off given the above. Disk space is cheap,
>     developer time required to maintain two parallel build systems isn't.

> My attempt to amend/revert 4c2c38e800f to have it use the
> pre-4c2c38e800f "make" invocation as a fallback failed, partially
> because I don't have a Windows development environment, so any attempt
> to change it is a painfully slow round-trip to GitHub CI.
> 
> Let's instead have CMake call out to the Makefile asking it what the
> definition of various variables lists is, rather than being forced to
> maintain those lists in a way that CMake can parse with regexes (which
> precludes anything but a giant hardcoded list).
> 
> I could familiarize myself enough with CMake to do this in some
> CMake-native way, but that would take "just as long as adding it to
> the Makefile"[2] (I think that took me <5 minutes, but I'm several
> hours into fighting with CMake)
> 
> So I consider this both a bugfix to the stated aims of this CMake
> integration, and a better way forward for having an alternate build
> system. I.e. If someone really does care about a having a
> GNU-make-less dependency for the "vs-build" I think this change offers
> a much better way forward for that.

> Once we invoke the Makefile to spew out e.g. its idea of "LIB_OBJS",
> it's going to be trivial to do that via some wrapper script that lives
> in "contrib/buildsystems". Such a script would either invoke "make
> print-{var,list}-%", or alternatively use an in-tree committed text
> file with the last known result of such a "make print-{var,list}-%"
> run.
> 
> 1. https://lore.kernel.org/git/xmqq8sikblv2.fsf@gitster.c.googlers.com
> 2. https://lore.kernel.org/git/CAKiG+9Xtof8Hj3npsS-M0SnT_dcjtHjP_+avWB4oOHkaMdnSbw@mail.gmail.com/
> 
> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
> ---
>   Makefile                            | 485 ++++------------------------
>   contrib/buildsystems/CMakeLists.txt |  53 ++-
>   2 files changed, 74 insertions(+), 464 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 4139bcf675c..5d78ab6860a 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -590,6 +590,19 @@ TEST_OBJS =
>   TEST_PROGRAMS_NEED_X =
>   THIRD_PARTY_SOURCES =
>   
> +## Guard against env: programs
> +TEST_PROGRAMS =
> +
> +## Guard against env: sources
> +CURL_SRC =
> +TEST_PROGRAMS_NEED_X_SRC =
> +XDIFF_SRC =
> +
> +## Guard against env: objects
> +CONDITIONAL_OBJS =
> +CURL_OBJS =
> +LIB_OBJS_DIRS =
> +
>   # Utility to dump whatever variables are defined here
>   print-var-%:
>   	@echo $($*)
> @@ -697,87 +710,23 @@ X =
>   
>   PROGRAMS += $(patsubst %.o,git-%$X,$(PROGRAM_OBJS))
>   
> -TEST_BUILTINS_OBJS += test-advise.o
> -TEST_BUILTINS_OBJS += test-bitmap.o
> -TEST_BUILTINS_OBJS += test-bloom.o
> -TEST_BUILTINS_OBJS += test-chmtime.o
> -TEST_BUILTINS_OBJS += test-config.o
> -TEST_BUILTINS_OBJS += test-crontab.o
> -TEST_BUILTINS_OBJS += test-ctype.o
> -TEST_BUILTINS_OBJS += test-date.o
> -TEST_BUILTINS_OBJS += test-delta.o
> -TEST_BUILTINS_OBJS += test-dir-iterator.o
> -TEST_BUILTINS_OBJS += test-drop-caches.o
> -TEST_BUILTINS_OBJS += test-dump-cache-tree.o
> -TEST_BUILTINS_OBJS += test-dump-fsmonitor.o
> -TEST_BUILTINS_OBJS += test-dump-split-index.o
> -TEST_BUILTINS_OBJS += test-dump-untracked-cache.o
> -TEST_BUILTINS_OBJS += test-example-decorate.o
> -TEST_BUILTINS_OBJS += test-fast-rebase.o
> -TEST_BUILTINS_OBJS += test-genrandom.o
> -TEST_BUILTINS_OBJS += test-genzeros.o
> -TEST_BUILTINS_OBJS += test-getcwd.o
> -TEST_BUILTINS_OBJS += test-hash-speed.o
> -TEST_BUILTINS_OBJS += test-hash.o
> -TEST_BUILTINS_OBJS += test-hashmap.o
> -TEST_BUILTINS_OBJS += test-index-version.o
> -TEST_BUILTINS_OBJS += test-json-writer.o
> -TEST_BUILTINS_OBJS += test-lazy-init-name-hash.o
> -TEST_BUILTINS_OBJS += test-match-trees.o
> -TEST_BUILTINS_OBJS += test-mergesort.o
> -TEST_BUILTINS_OBJS += test-mktemp.o
> -TEST_BUILTINS_OBJS += test-oid-array.o
> -TEST_BUILTINS_OBJS += test-oidmap.o
> -TEST_BUILTINS_OBJS += test-oidtree.o
> -TEST_BUILTINS_OBJS += test-online-cpus.o
> -TEST_BUILTINS_OBJS += test-parse-options.o
> -TEST_BUILTINS_OBJS += test-parse-pathspec-file.o
> -TEST_BUILTINS_OBJS += test-partial-clone.o
> -TEST_BUILTINS_OBJS += test-path-utils.o
> -TEST_BUILTINS_OBJS += test-pcre2-config.o
> -TEST_BUILTINS_OBJS += test-pkt-line.o
> -TEST_BUILTINS_OBJS += test-prio-queue.o
> -TEST_BUILTINS_OBJS += test-proc-receive.o
> -TEST_BUILTINS_OBJS += test-progress.o
> -TEST_BUILTINS_OBJS += test-reach.o
> -TEST_BUILTINS_OBJS += test-read-cache.o
> -TEST_BUILTINS_OBJS += test-read-graph.o
> -TEST_BUILTINS_OBJS += test-read-midx.o
> -TEST_BUILTINS_OBJS += test-ref-store.o
> -TEST_BUILTINS_OBJS += test-regex.o
> -TEST_BUILTINS_OBJS += test-repository.o
> -TEST_BUILTINS_OBJS += test-revision-walking.o
> -TEST_BUILTINS_OBJS += test-run-command.o
> -TEST_BUILTINS_OBJS += test-scrap-cache-tree.o
> -TEST_BUILTINS_OBJS += test-serve-v2.o
> -TEST_BUILTINS_OBJS += test-sha1.o
> -TEST_BUILTINS_OBJS += test-sha256.o
> -TEST_BUILTINS_OBJS += test-sigchain.o
> -TEST_BUILTINS_OBJS += test-simple-ipc.o
> -TEST_BUILTINS_OBJS += test-strcmp-offset.o
> -TEST_BUILTINS_OBJS += test-string-list.o
> -TEST_BUILTINS_OBJS += test-submodule-config.o
> -TEST_BUILTINS_OBJS += test-submodule-nested-repo-config.o
> -TEST_BUILTINS_OBJS += test-subprocess.o
> -TEST_BUILTINS_OBJS += test-trace2.o
> -TEST_BUILTINS_OBJS += test-urlmatch-normalization.o
> -TEST_BUILTINS_OBJS += test-userdiff.o
> -TEST_BUILTINS_OBJS += test-wildmatch.o
> -TEST_BUILTINS_OBJS += test-windows-named-pipe.o
> -TEST_BUILTINS_OBJS += test-write-cache.o
> -TEST_BUILTINS_OBJS += test-xml-encode.o
> -
>   # Do not add more tests here unless they have extra dependencies. Add
>   # them in TEST_BUILTINS_OBJS above.
>   TEST_PROGRAMS_NEED_X += test-fake-ssh
>   TEST_PROGRAMS_NEED_X += test-tool
>   
> -TEST_PROGRAMS = $(patsubst %,t/helper/%$X,$(TEST_PROGRAMS_NEED_X))
> +TEST_PROGRAMS_NEED_X_SRC += $(TEST_PROGRAMS_NEED_X:%=t/helper/%.c)
> +TEST_PROGRAMS += $(TEST_PROGRAMS_NEED_X_SRC:%.c=%$X)
> +TEST_BUILTINS_SRC += $(filter-out $(TEST_PROGRAMS_NEED_X_SRC),$(wildcard t/helper/*.c))
> +TEST_BUILTINS_OBJS += $(TEST_BUILTINS_SRC:%.c=%.o)
>   
> -# List built-in command $C whose implementation cmd_$C() is not in
> -# builtin/$C.o but is linked in as part of some other command.
> +# List built-in command $C whose implementation cmd_$C() is in
> +# builtin/$C.o
> +BUILTIN_OBJS = $(patsubst %.c,%.o,$(wildcard builtin/*.c))
>   BUILT_INS += $(patsubst builtin/%.o,git-%$X,$(BUILTIN_OBJS))
>   
> +# List built-in command $C whose implementation cmd_$C() is not in
> +# builtin/$C.o but is linked in as part of some other command.
>   BUILT_INS += git-cherry$X
>   BUILT_INS += git-cherry-pick$X
>   BUILT_INS += git-format-patch$X
> @@ -837,355 +786,28 @@ LIB_H := $(sort $(patsubst ./%,%,$(shell git ls-files '*.h' ':!t/' ':!Documentat
>   	-name Documentation -prune -o \
>   	-name '*.h' -print)))
>   
> -LIB_OBJS += abspath.o
> -LIB_OBJS += add-interactive.o
> -LIB_OBJS += add-patch.o
> -LIB_OBJS += advice.o
> -LIB_OBJS += alias.o
> -LIB_OBJS += alloc.o
> -LIB_OBJS += apply.o
> -LIB_OBJS += archive-tar.o
> -LIB_OBJS += archive-zip.o
> -LIB_OBJS += archive.o
> -LIB_OBJS += attr.o
> -LIB_OBJS += base85.o
> -LIB_OBJS += bisect.o
> -LIB_OBJS += blame.o
> -LIB_OBJS += blob.o
> -LIB_OBJS += bloom.o
> -LIB_OBJS += branch.o
> -LIB_OBJS += bulk-checkin.o
> -LIB_OBJS += bundle.o
> -LIB_OBJS += cache-tree.o
> -LIB_OBJS += cbtree.o
> -LIB_OBJS += chdir-notify.o
> -LIB_OBJS += checkout.o
> -LIB_OBJS += chunk-format.o
> -LIB_OBJS += color.o
> -LIB_OBJS += column.o
> -LIB_OBJS += combine-diff.o
> -LIB_OBJS += commit-graph.o
> -LIB_OBJS += commit-reach.o
> -LIB_OBJS += commit.o
> +# LIB_OBJS: compat/* objects that live at the top-level
> +CONDITIONAL_OBJS += unix-socket.o
> +CONDITIONAL_OBJS += unix-stream-server.o
> +CONDITIONAL_OBJS += sha1dc_git.o
> +
> +# LIB_OBJS: Mostly glob *.c at the top-level, with some exlusions
> +LIB_OBJS += $(filter-out \
> +	$(CONDITIONAL_OBJS) \
> +	git.o common-main.o $(PROGRAM_OBJS) \
> +	$(FUZZ_OBJS) $(CURL_OBJS),\
> +	$(patsubst %.c,%.o,$(wildcard *.c)))
> +
> +# LIB_OBJS: Directories that contain only LIB_OBJS
> +LIB_OBJS_DIRS += ewah
> +LIB_OBJS_DIRS += negotiator
> +LIB_OBJS_DIRS += refs
> +LIB_OBJS_DIRS += trace2
> +LIB_OBJS += $(patsubst %.c,%.o,$(wildcard $(addsuffix /*.c,$(LIB_OBJS_DIRS))))
> +
> +# LIB_OBJS: unconditional compat/* objects
>   LIB_OBJS += compat/obstack.o
>   LIB_OBJS += compat/terminal.o
> -LIB_OBJS += config.o
> -LIB_OBJS += connect.o
> -LIB_OBJS += connected.o
> -LIB_OBJS += convert.o
> -LIB_OBJS += copy.o
> -LIB_OBJS += credential.o
> -LIB_OBJS += csum-file.o
> -LIB_OBJS += ctype.o
> -LIB_OBJS += date.o
> -LIB_OBJS += decorate.o
> -LIB_OBJS += delta-islands.o
> -LIB_OBJS += diff-delta.o
> -LIB_OBJS += diff-merges.o
> -LIB_OBJS += diff-lib.o
> -LIB_OBJS += diff-no-index.o
> -LIB_OBJS += diff.o
> -LIB_OBJS += diffcore-break.o
> -LIB_OBJS += diffcore-delta.o
> -LIB_OBJS += diffcore-order.o
> -LIB_OBJS += diffcore-pickaxe.o
> -LIB_OBJS += diffcore-rename.o
> -LIB_OBJS += diffcore-rotate.o
> -LIB_OBJS += dir-iterator.o
> -LIB_OBJS += dir.o
> -LIB_OBJS += editor.o
> -LIB_OBJS += entry.o
> -LIB_OBJS += environment.o
> -LIB_OBJS += ewah/bitmap.o
> -LIB_OBJS += ewah/ewah_bitmap.o
> -LIB_OBJS += ewah/ewah_io.o
> -LIB_OBJS += ewah/ewah_rlw.o
> -LIB_OBJS += exec-cmd.o
> -LIB_OBJS += fetch-negotiator.o
> -LIB_OBJS += fetch-pack.o
> -LIB_OBJS += fmt-merge-msg.o
> -LIB_OBJS += fsck.o
> -LIB_OBJS += fsmonitor.o
> -LIB_OBJS += gettext.o
> -LIB_OBJS += gpg-interface.o
> -LIB_OBJS += graph.o
> -LIB_OBJS += grep.o
> -LIB_OBJS += hash-lookup.o
> -LIB_OBJS += hashmap.o
> -LIB_OBJS += help.o
> -LIB_OBJS += hex.o
> -LIB_OBJS += hook.o
> -LIB_OBJS += ident.o
> -LIB_OBJS += json-writer.o
> -LIB_OBJS += kwset.o
> -LIB_OBJS += levenshtein.o
> -LIB_OBJS += line-log.o
> -LIB_OBJS += line-range.o
> -LIB_OBJS += linear-assignment.o
> -LIB_OBJS += list-objects-filter-options.o
> -LIB_OBJS += list-objects-filter.o
> -LIB_OBJS += list-objects.o
> -LIB_OBJS += ll-merge.o
> -LIB_OBJS += lockfile.o
> -LIB_OBJS += log-tree.o
> -LIB_OBJS += ls-refs.o
> -LIB_OBJS += mailinfo.o
> -LIB_OBJS += mailmap.o
> -LIB_OBJS += match-trees.o
> -LIB_OBJS += mem-pool.o
> -LIB_OBJS += merge-blobs.o
> -LIB_OBJS += merge-ort.o
> -LIB_OBJS += merge-ort-wrappers.o
> -LIB_OBJS += merge-recursive.o
> -LIB_OBJS += merge.o
> -LIB_OBJS += mergesort.o
> -LIB_OBJS += midx.o
> -LIB_OBJS += name-hash.o
> -LIB_OBJS += negotiator/default.o
> -LIB_OBJS += negotiator/noop.o
> -LIB_OBJS += negotiator/skipping.o
> -LIB_OBJS += notes-cache.o
> -LIB_OBJS += notes-merge.o
> -LIB_OBJS += notes-utils.o
> -LIB_OBJS += notes.o
> -LIB_OBJS += object-file.o
> -LIB_OBJS += object-name.o
> -LIB_OBJS += object.o
> -LIB_OBJS += oid-array.o
> -LIB_OBJS += oidmap.o
> -LIB_OBJS += oidset.o
> -LIB_OBJS += oidtree.o
> -LIB_OBJS += pack-bitmap-write.o
> -LIB_OBJS += pack-bitmap.o
> -LIB_OBJS += pack-check.o
> -LIB_OBJS += pack-objects.o
> -LIB_OBJS += pack-revindex.o
> -LIB_OBJS += pack-write.o
> -LIB_OBJS += packfile.o
> -LIB_OBJS += pager.o
> -LIB_OBJS += parallel-checkout.o
> -LIB_OBJS += parse-options-cb.o
> -LIB_OBJS += parse-options.o
> -LIB_OBJS += patch-delta.o
> -LIB_OBJS += patch-ids.o
> -LIB_OBJS += path.o
> -LIB_OBJS += pathspec.o
> -LIB_OBJS += pkt-line.o
> -LIB_OBJS += preload-index.o
> -LIB_OBJS += pretty.o
> -LIB_OBJS += prio-queue.o
> -LIB_OBJS += progress.o
> -LIB_OBJS += promisor-remote.o
> -LIB_OBJS += prompt.o
> -LIB_OBJS += protocol.o
> -LIB_OBJS += protocol-caps.o
> -LIB_OBJS += prune-packed.o
> -LIB_OBJS += quote.o
> -LIB_OBJS += range-diff.o
> -LIB_OBJS += reachable.o
> -LIB_OBJS += read-cache.o
> -LIB_OBJS += rebase-interactive.o
> -LIB_OBJS += rebase.o
> -LIB_OBJS += ref-filter.o
> -LIB_OBJS += reflog-walk.o
> -LIB_OBJS += refs.o
> -LIB_OBJS += refs/debug.o
> -LIB_OBJS += refs/files-backend.o
> -LIB_OBJS += refs/iterator.o
> -LIB_OBJS += refs/packed-backend.o
> -LIB_OBJS += refs/ref-cache.o
> -LIB_OBJS += refspec.o
> -LIB_OBJS += remote.o
> -LIB_OBJS += replace-object.o
> -LIB_OBJS += repo-settings.o
> -LIB_OBJS += repository.o
> -LIB_OBJS += rerere.o
> -LIB_OBJS += reset.o
> -LIB_OBJS += resolve-undo.o
> -LIB_OBJS += revision.o
> -LIB_OBJS += run-command.o
> -LIB_OBJS += send-pack.o
> -LIB_OBJS += sequencer.o
> -LIB_OBJS += serve.o
> -LIB_OBJS += server-info.o
> -LIB_OBJS += setup.o
> -LIB_OBJS += shallow.o
> -LIB_OBJS += sideband.o
> -LIB_OBJS += sigchain.o
> -LIB_OBJS += sparse-index.o
> -LIB_OBJS += split-index.o
> -LIB_OBJS += stable-qsort.o
> -LIB_OBJS += strbuf.o
> -LIB_OBJS += streaming.o
> -LIB_OBJS += string-list.o
> -LIB_OBJS += strmap.o
> -LIB_OBJS += strvec.o
> -LIB_OBJS += sub-process.o
> -LIB_OBJS += submodule-config.o
> -LIB_OBJS += submodule.o
> -LIB_OBJS += symlinks.o
> -LIB_OBJS += tag.o
> -LIB_OBJS += tempfile.o
> -LIB_OBJS += thread-utils.o
> -LIB_OBJS += tmp-objdir.o
> -LIB_OBJS += trace.o
> -LIB_OBJS += trace2.o
> -LIB_OBJS += trace2/tr2_cfg.o
> -LIB_OBJS += trace2/tr2_cmd_name.o
> -LIB_OBJS += trace2/tr2_dst.o
> -LIB_OBJS += trace2/tr2_sid.o
> -LIB_OBJS += trace2/tr2_sysenv.o
> -LIB_OBJS += trace2/tr2_tbuf.o
> -LIB_OBJS += trace2/tr2_tgt_event.o
> -LIB_OBJS += trace2/tr2_tgt_normal.o
> -LIB_OBJS += trace2/tr2_tgt_perf.o
> -LIB_OBJS += trace2/tr2_tls.o
> -LIB_OBJS += trailer.o
> -LIB_OBJS += transport-helper.o
> -LIB_OBJS += transport.o
> -LIB_OBJS += tree-diff.o
> -LIB_OBJS += tree-walk.o
> -LIB_OBJS += tree.o
> -LIB_OBJS += unpack-trees.o
> -LIB_OBJS += upload-pack.o
> -LIB_OBJS += url.o
> -LIB_OBJS += urlmatch.o
> -LIB_OBJS += usage.o
> -LIB_OBJS += userdiff.o
> -LIB_OBJS += utf8.o
> -LIB_OBJS += varint.o
> -LIB_OBJS += version.o
> -LIB_OBJS += versioncmp.o
> -LIB_OBJS += walker.o
> -LIB_OBJS += wildmatch.o
> -LIB_OBJS += worktree.o
> -LIB_OBJS += wrapper.o
> -LIB_OBJS += write-or-die.o
> -LIB_OBJS += ws.o
> -LIB_OBJS += wt-status.o
> -LIB_OBJS += xdiff-interface.o
> -LIB_OBJS += zlib.o
> -
> -BUILTIN_OBJS += builtin/add.o
> -BUILTIN_OBJS += builtin/am.o
> -BUILTIN_OBJS += builtin/annotate.o
> -BUILTIN_OBJS += builtin/apply.o
> -BUILTIN_OBJS += builtin/archive.o
> -BUILTIN_OBJS += builtin/bisect--helper.o
> -BUILTIN_OBJS += builtin/blame.o
> -BUILTIN_OBJS += builtin/branch.o
> -BUILTIN_OBJS += builtin/bugreport.o
> -BUILTIN_OBJS += builtin/bundle.o
> -BUILTIN_OBJS += builtin/cat-file.o
> -BUILTIN_OBJS += builtin/check-attr.o
> -BUILTIN_OBJS += builtin/check-ignore.o
> -BUILTIN_OBJS += builtin/check-mailmap.o
> -BUILTIN_OBJS += builtin/check-ref-format.o
> -BUILTIN_OBJS += builtin/checkout--worker.o
> -BUILTIN_OBJS += builtin/checkout-index.o
> -BUILTIN_OBJS += builtin/checkout.o
> -BUILTIN_OBJS += builtin/clean.o
> -BUILTIN_OBJS += builtin/clone.o
> -BUILTIN_OBJS += builtin/column.o
> -BUILTIN_OBJS += builtin/commit-graph.o
> -BUILTIN_OBJS += builtin/commit-tree.o
> -BUILTIN_OBJS += builtin/commit.o
> -BUILTIN_OBJS += builtin/config.o
> -BUILTIN_OBJS += builtin/count-objects.o
> -BUILTIN_OBJS += builtin/credential-cache--daemon.o
> -BUILTIN_OBJS += builtin/credential-cache.o
> -BUILTIN_OBJS += builtin/credential-store.o
> -BUILTIN_OBJS += builtin/credential.o
> -BUILTIN_OBJS += builtin/describe.o
> -BUILTIN_OBJS += builtin/diff-files.o
> -BUILTIN_OBJS += builtin/diff-index.o
> -BUILTIN_OBJS += builtin/diff-tree.o
> -BUILTIN_OBJS += builtin/diff.o
> -BUILTIN_OBJS += builtin/difftool.o
> -BUILTIN_OBJS += builtin/env--helper.o
> -BUILTIN_OBJS += builtin/fast-export.o
> -BUILTIN_OBJS += builtin/fast-import.o
> -BUILTIN_OBJS += builtin/fetch-pack.o
> -BUILTIN_OBJS += builtin/fetch.o
> -BUILTIN_OBJS += builtin/fmt-merge-msg.o
> -BUILTIN_OBJS += builtin/for-each-ref.o
> -BUILTIN_OBJS += builtin/for-each-repo.o
> -BUILTIN_OBJS += builtin/fsck.o
> -BUILTIN_OBJS += builtin/gc.o
> -BUILTIN_OBJS += builtin/get-tar-commit-id.o
> -BUILTIN_OBJS += builtin/grep.o
> -BUILTIN_OBJS += builtin/hash-object.o
> -BUILTIN_OBJS += builtin/help.o
> -BUILTIN_OBJS += builtin/index-pack.o
> -BUILTIN_OBJS += builtin/init-db.o
> -BUILTIN_OBJS += builtin/interpret-trailers.o
> -BUILTIN_OBJS += builtin/log.o
> -BUILTIN_OBJS += builtin/ls-files.o
> -BUILTIN_OBJS += builtin/ls-remote.o
> -BUILTIN_OBJS += builtin/ls-tree.o
> -BUILTIN_OBJS += builtin/mailinfo.o
> -BUILTIN_OBJS += builtin/mailsplit.o
> -BUILTIN_OBJS += builtin/merge-base.o
> -BUILTIN_OBJS += builtin/merge-file.o
> -BUILTIN_OBJS += builtin/merge-index.o
> -BUILTIN_OBJS += builtin/merge-ours.o
> -BUILTIN_OBJS += builtin/merge-recursive.o
> -BUILTIN_OBJS += builtin/merge-tree.o
> -BUILTIN_OBJS += builtin/merge.o
> -BUILTIN_OBJS += builtin/mktag.o
> -BUILTIN_OBJS += builtin/mktree.o
> -BUILTIN_OBJS += builtin/multi-pack-index.o
> -BUILTIN_OBJS += builtin/mv.o
> -BUILTIN_OBJS += builtin/name-rev.o
> -BUILTIN_OBJS += builtin/notes.o
> -BUILTIN_OBJS += builtin/pack-objects.o
> -BUILTIN_OBJS += builtin/pack-redundant.o
> -BUILTIN_OBJS += builtin/pack-refs.o
> -BUILTIN_OBJS += builtin/patch-id.o
> -BUILTIN_OBJS += builtin/prune-packed.o
> -BUILTIN_OBJS += builtin/prune.o
> -BUILTIN_OBJS += builtin/pull.o
> -BUILTIN_OBJS += builtin/push.o
> -BUILTIN_OBJS += builtin/range-diff.o
> -BUILTIN_OBJS += builtin/read-tree.o
> -BUILTIN_OBJS += builtin/rebase.o
> -BUILTIN_OBJS += builtin/receive-pack.o
> -BUILTIN_OBJS += builtin/reflog.o
> -BUILTIN_OBJS += builtin/remote-ext.o
> -BUILTIN_OBJS += builtin/remote-fd.o
> -BUILTIN_OBJS += builtin/remote.o
> -BUILTIN_OBJS += builtin/repack.o
> -BUILTIN_OBJS += builtin/replace.o
> -BUILTIN_OBJS += builtin/rerere.o
> -BUILTIN_OBJS += builtin/reset.o
> -BUILTIN_OBJS += builtin/rev-list.o
> -BUILTIN_OBJS += builtin/rev-parse.o
> -BUILTIN_OBJS += builtin/revert.o
> -BUILTIN_OBJS += builtin/rm.o
> -BUILTIN_OBJS += builtin/send-pack.o
> -BUILTIN_OBJS += builtin/shortlog.o
> -BUILTIN_OBJS += builtin/show-branch.o
> -BUILTIN_OBJS += builtin/show-index.o
> -BUILTIN_OBJS += builtin/show-ref.o
> -BUILTIN_OBJS += builtin/sparse-checkout.o
> -BUILTIN_OBJS += builtin/stash.o
> -BUILTIN_OBJS += builtin/stripspace.o
> -BUILTIN_OBJS += builtin/submodule--helper.o
> -BUILTIN_OBJS += builtin/symbolic-ref.o
> -BUILTIN_OBJS += builtin/tag.o
> -BUILTIN_OBJS += builtin/unpack-file.o
> -BUILTIN_OBJS += builtin/unpack-objects.o
> -BUILTIN_OBJS += builtin/update-index.o
> -BUILTIN_OBJS += builtin/update-ref.o
> -BUILTIN_OBJS += builtin/update-server-info.o
> -BUILTIN_OBJS += builtin/upload-archive.o
> -BUILTIN_OBJS += builtin/upload-pack.o
> -BUILTIN_OBJS += builtin/var.o
> -BUILTIN_OBJS += builtin/verify-commit.o
> -BUILTIN_OBJS += builtin/verify-pack.o
> -BUILTIN_OBJS += builtin/verify-tag.o
> -BUILTIN_OBJS += builtin/worktree.o
> -BUILTIN_OBJS += builtin/write-tree.o
>   
>   # THIRD_PARTY_SOURCES is a list of patterns compatible with the
>   # $(filter) and $(filter-out) family of functions. They specify source
> @@ -2076,6 +1698,7 @@ endif
>   LIBS = $(filter-out %.o, $(GITLIBS)) $(EXTLIBS)
>   
>   BASIC_CFLAGS += $(COMPAT_CFLAGS)
> +LIB_OBJS_NO_COMPAT := $(LIB_OBJS)
>   LIB_OBJS += $(COMPAT_OBJS)
>   
>   # Quote for C
> @@ -2436,17 +2059,12 @@ reconfigure config.mak.autogen: config.status
>   .PHONY: reconfigure # This is a convenience target.
>   endif
>   
> -XDIFF_OBJS += xdiff/xdiffi.o
> -XDIFF_OBJS += xdiff/xemit.o
> -XDIFF_OBJS += xdiff/xhistogram.o
> -XDIFF_OBJS += xdiff/xmerge.o
> -XDIFF_OBJS += xdiff/xpatience.o
> -XDIFF_OBJS += xdiff/xprepare.o
> -XDIFF_OBJS += xdiff/xutils.o
> +XDIFF_SRC += $(wildcard xdiff/*.c)
> +XDIFF_OBJS += $(XDIFF_SRC:.c=.o)
>   .PHONY: xdiff-objs
>   xdiff-objs: $(XDIFF_OBJS)
>   
> -TEST_OBJS := $(patsubst %$X,%.o,$(TEST_PROGRAMS)) $(patsubst %,t/helper/%,$(TEST_BUILTINS_OBJS))
> +TEST_OBJS := $(patsubst %$X,%.o,$(TEST_PROGRAMS)) $(TEST_BUILTINS_OBJS)
>   .PHONY: test-objs
>   test-objs: $(TEST_OBJS)
>   
> @@ -2457,13 +2075,20 @@ GIT_OBJS += git.o
>   .PHONY: git-objs
>   git-objs: $(GIT_OBJS)
>   
> +CURL_SRC += http.c
> +CURL_SRC += http-walker.c
> +CURL_SRC += remote-curl.c
> +CURL_OBJS += $(CURL_SRC:.c=.o)
> +.PHONY: curl-objs
> +curl-objs: $(CURL_OBJS)
> +
>   OBJECTS += $(GIT_OBJS)
>   OBJECTS += $(PROGRAM_OBJS)
>   OBJECTS += $(TEST_OBJS)
>   OBJECTS += $(XDIFF_OBJS)
>   OBJECTS += $(FUZZ_OBJS)
>   ifndef NO_CURL
> -	OBJECTS += http.o http-walker.o remote-curl.o
> +OBJECTS += $(CURL_OBJS)
>   endif
>   .PHONY: objects
>   objects: $(OBJECTS)
> @@ -2900,7 +2525,7 @@ perf: all
>   
>   .PRECIOUS: $(TEST_OBJS)
>   
> -t/helper/test-tool$X: $(patsubst %,t/helper/%,$(TEST_BUILTINS_OBJS))
> +t/helper/test-tool$X: $(TEST_BUILTINS_OBJS)
>   
>   t/helper/test-%$X: t/helper/test-%.o GIT-LDFLAGS $(GITLIBS)
>   	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(filter %.a,$^) $(LIBS)
> diff --git a/contrib/buildsystems/CMakeLists.txt b/contrib/buildsystems/CMakeLists.txt
> index fd1399c440f..d57c9203b66 100644
> --- a/contrib/buildsystems/CMakeLists.txt
> +++ b/contrib/buildsystems/CMakeLists.txt
> @@ -111,32 +111,15 @@ project(git
>   #TODO Add pcre support
>   
>   #macros for parsing the Makefile for sources and scripts
> -macro(parse_makefile_for_sources list_var regex)
> -	file(STRINGS ${CMAKE_SOURCE_DIR}/Makefile ${list_var} REGEX "^${regex} \\+=(.*)")
> -	string(REPLACE "${regex} +=" "" ${list_var} ${${list_var}})
> -	string(REPLACE "$(COMPAT_OBJS)" "" ${list_var} ${${list_var}}) #remove "$(COMPAT_OBJS)" This is only for libgit.
> -	string(STRIP ${${list_var}} ${list_var}) #remove trailing/leading whitespaces
> -	string(REPLACE ".o" ".c;" ${list_var} ${${list_var}}) #change .o to .c, ; is for converting the string into a list
> -	list(TRANSFORM ${list_var} STRIP) #remove trailing/leading whitespaces for each element in list
> -	list(REMOVE_ITEM ${list_var} "") #remove empty list elements
> -endmacro()
> -
> -macro(parse_makefile_for_scripts list_var regex lang)
> -	file(STRINGS ${CMAKE_SOURCE_DIR}/Makefile ${list_var} REGEX "^${regex} \\+=(.*)")
> -	string(REPLACE "${regex} +=" "" ${list_var} ${${list_var}})
> -	string(STRIP ${${list_var}} ${list_var}) #remove trailing/leading whitespaces
> -	string(REPLACE " " ";" ${list_var} ${${list_var}}) #convert string to a list
> -	if(NOT ${lang}) #exclude for SCRIPT_LIB
> -		list(TRANSFORM ${list_var} REPLACE "${lang}" "") #do the replacement
> -	endif()
> -endmacro()
> -
> -macro(parse_makefile_for_executables list_var regex)
> -	file(STRINGS ${CMAKE_SOURCE_DIR}/Makefile ${list_var} REGEX "^${regex} \\+= git-(.*)")
> -	string(REPLACE "${regex} +=" "" ${list_var} ${${list_var}})
> +macro(ask_makefile_for_list list_var var_name)
> +	execute_process(COMMAND make print-list-${var_name}
> +			WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
> +			OUTPUT_VARIABLE ${list_var})
> +	string(REGEX REPLACE "\\.o\n" ".c\n" ${list_var} ${${list_var}}) #change .o to .c
>   	string(STRIP ${${list_var}} ${list_var}) #remove trailing/leading whitespaces
> -	string(REPLACE "git-" "" ${list_var} ${${list_var}}) #strip `git-` prefix
> -	string(REPLACE "\$X" ";" ${list_var} ${${list_var}}) #strip $X, ; is for converting the string into a list
> +	## Parse the Makefile print-list-% format
> +	string(REGEX REPLACE "${var_name} =\n" "" ${list_var} ${${list_var}})
> +	string(REGEX REPLACE "${var_name} \\+?= ([^\n]+)" "\\1;" ${list_var} ${${list_var}})
>   	list(TRANSFORM ${list_var} STRIP) #remove trailing/leading whitespaces for each element in list
>   	list(REMOVE_ITEM ${list_var} "") #remove empty list elements
>   endmacro()
> @@ -635,14 +618,14 @@ include_directories(${CMAKE_BINARY_DIR})
>   
>   #build
>   #libgit
> -parse_makefile_for_sources(libgit_SOURCES "LIB_OBJS")
> +ask_makefile_for_list(libgit_SOURCES "LIB_OBJS_NO_COMPAT")
>   
>   list(TRANSFORM libgit_SOURCES PREPEND "${CMAKE_SOURCE_DIR}/")
>   list(TRANSFORM compat_SOURCES PREPEND "${CMAKE_SOURCE_DIR}/")
>   add_library(libgit ${libgit_SOURCES} ${compat_SOURCES})
>   
>   #libxdiff
> -parse_makefile_for_sources(libxdiff_SOURCES "XDIFF_OBJS")
> +ask_makefile_for_list(libxdiff_SOURCES "XDIFF_OBJS")
>   
>   list(TRANSFORM libxdiff_SOURCES PREPEND "${CMAKE_SOURCE_DIR}/")
>   add_library(xdiff STATIC ${libxdiff_SOURCES})
> @@ -693,7 +676,7 @@ elseif(UNIX)
>   endif()
>   
>   #git
> -parse_makefile_for_sources(git_SOURCES "BUILTIN_OBJS")
> +ask_makefile_for_list(git_SOURCES "BUILTIN_OBJS")
>   
>   list(TRANSFORM git_SOURCES PREPEND "${CMAKE_SOURCE_DIR}/")
>   add_executable(git ${CMAKE_SOURCE_DIR}/git.c ${git_SOURCES})
> @@ -729,7 +712,9 @@ if(CURL_FOUND)
>   	endif()
>   endif()
>   
> -parse_makefile_for_executables(git_builtin_extra "BUILT_INS")
> +ask_makefile_for_list(git_builtin_extra "BUILT_INS")
> +list(TRANSFORM git_builtin_extra REPLACE "^git-(.*)" "\\1") #strip `git-` prefix
> +list(TRANSFORM git_builtin_extra REPLACE "\.exe$" "") #strip $X
>   
>   option(SKIP_DASHED_BUILT_INS "Skip hardlinking the dashed versions of the built-ins")
>   
> @@ -766,8 +751,8 @@ set(GITWEBDIR ${FALLBACK_RUNTIME_PREFIX}/share/locale)
>   set(INSTLIBDIR ${FALLBACK_RUNTIME_PREFIX}/share/perl5)
>   
>   #shell scripts
> -parse_makefile_for_scripts(git_sh_scripts "SCRIPT_SH" ".sh")
> -parse_makefile_for_scripts(git_shlib_scripts "SCRIPT_LIB" "")
> +ask_makefile_for_list(git_sh_scripts "SCRIPT_SH_GEN")
> +ask_makefile_for_list(git_shlib_scripts "SCRIPT_LIB_GEN")
>   set(git_shell_scripts
>   	${git_sh_scripts} ${git_shlib_scripts} git-instaweb)
>   
> @@ -787,7 +772,7 @@ foreach(script ${git_shell_scripts})
>   endforeach()
>   
>   #perl scripts
> -parse_makefile_for_scripts(git_perl_scripts "SCRIPT_PERL" ".perl")
> +ask_makefile_for_list(git_perl_scripts "SCRIPT_PERL_GEN")
>   
>   #create perl header
>   file(STRINGS ${CMAKE_SOURCE_DIR}/perl/header_templates/fixed_prefix.template.pl perl_header )
> @@ -910,9 +895,9 @@ add_executable(test-fake-ssh ${CMAKE_SOURCE_DIR}/t/helper/test-fake-ssh.c)
>   target_link_libraries(test-fake-ssh common-main)
>   
>   #test-tool
> -parse_makefile_for_sources(test-tool_SOURCES "TEST_BUILTINS_OBJS")
> +ask_makefile_for_list(test-tool_SOURCES "TEST_BUILTINS_OBJS")
>   
> -list(TRANSFORM test-tool_SOURCES PREPEND "${CMAKE_SOURCE_DIR}/t/helper/")
> +list(TRANSFORM test-tool_SOURCES PREPEND "${CMAKE_SOURCE_DIR}/")
>   add_executable(test-tool ${CMAKE_SOURCE_DIR}/t/helper/test-tool.c ${test-tool_SOURCES})
>   target_link_libraries(test-tool common-main)
>   
>