git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH v2 4/5] set_work_tree: use chdir_notify

From
Jeff King <peff@peff.net>
Date
Mar 30, 2018, 18:35 UTC
Message-ID
<20180330183508.GD31135@sigill.intra.peff.net>
In-Reply-To
<20180330183425.GA30575@sigill.intra.peff.net>

When we change to the top of the working tree, we manually re-adjust $GIT_DIR and call set_git_dir() again, in order to update any relative git-dir we'd compute earlier.

Instead of the work-tree code having to know to call the git-dir code, let's use the new chdir_notify interface. There are two spots that need updating, with a few subtleties in each:

  1. the set_git_dir() code needs to chdir_notify_register()
     so it can be told when to update its path.
     Technically we could push this down into repo_set_gitdir(),
     so that even repository structs besides the_repository
     could benefit from this. But that opens up a lot of
     complications:
      - we'd still need to touch set_git_dir(), because it
        does some other setup (like setting $GIT_DIR in the
        environment)
      - submodules using other repository structs get
        cleaned up, which means we'd need to remove them
        from the chdir_notify list
      - it's unlikely to fix any bugs, since we shouldn't
        generally chdir() in the middle of working on a
        submodule
  2. setup_work_tree now needs to call chdir_notify(), and
     can lose its manual set_git_dir() call.
     Note that at first glance it looks like this undoes the
     absolute-to-relative optimization added by 044bbbcb63
     (Make git_dir a path relative to work_tree in
     setup_work_tree(), 2008-06-19). But for the most part
     that optimization was just _undoing_ the
     relative-to-absolute conversion which the function was
     doing earlier (and which is now gone).
     It is true that if you already have an absolute git_dir
     that the setup_work_tree() function will no longer make
     it relative as a side effect. But:
       - we generally do have relative git-dir's due to the
         way the discovery code works
       - if we really care about making git-dir's relative
         when possible, then we should be relativizing them
         earlier (e.g., when we see an absolute $GIT_DIR we
         could turn it relative, whether we are going to
         chdir into a worktree or not). That would cover all
         cases, including ones that 044bbbcb63 did not.
Signed-off-by: Jeff King <peff@peff.net>
---
 environment.c | 23 ++++++++++++++++++++++-
 setup.c       |  9 +++------
 2 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/environment.c b/environment.c
index e01acf8b11..903a6c9df7 100644
--- a/environment.c
+++ b/environment.c
@@ -13,6 +13,7 @@
 #include "refs.h"
 #include "fmt-merge-msg.h"
 #include "commit.h"
+#include "chdir-notify.h"
 
 int trust_executable_bit = 1;
 int trust_ctime = 1;
@@ -296,7 +297,7 @@ char *get_graft_file(void)
 	return the_repository->graft_file;
 }
 
-void set_git_dir(const char *path)
+static void set_git_dir_1(const char *path)
 {
 	if (setenv(GIT_DIR_ENVIRONMENT, path, 1))
 		die("could not set GIT_DIR to '%s'", path);
@@ -304,6 +305,26 @@ void set_git_dir(const char *path)
 	setup_git_env();
 }
 
+static void update_relative_gitdir(const char *name,
+				   const char *old_cwd,
+				   const char *new_cwd,
+				   void *data)
+{
+	char *path = reparent_relative_path(old_cwd, new_cwd, get_git_dir());
+	trace_printf_key(&trace_setup_key,
+			 "setup: move $GIT_DIR to '%s'",
+			 path);
+	set_git_dir_1(path);
+	free(path);
+}
+
+void set_git_dir(const char *path)
+{
+	set_git_dir_1(path);
+	if (!is_absolute_path(path))
+		chdir_notify_register(NULL, update_relative_gitdir, NULL);
+}
+
 const char *get_log_output_encoding(void)
 {
 	return git_log_output_encoding ? git_log_output_encoding
diff --git a/setup.c b/setup.c
index 7287779642..9eb2e808e1 100644
--- a/setup.c
+++ b/setup.c
@@ -3,6 +3,7 @@
 #include "config.h"
 #include "dir.h"
 #include "string-list.h"
+#include "chdir-notify.h"
 
 static int inside_git_dir = -1;
 static int inside_work_tree = -1;
@@ -378,7 +379,7 @@ int is_inside_work_tree(void)
 
 void setup_work_tree(void)
 {
-	const char *work_tree, *git_dir;
+	const char *work_tree;
 	static int initialized = 0;
 
 	if (initialized)
@@ -388,10 +389,7 @@ void setup_work_tree(void)
 		die(_("unable to set up work tree using invalid config"));
 
 	work_tree = get_git_work_tree();
-	git_dir = get_git_dir();
-	if (!is_absolute_path(git_dir))
-		git_dir = real_path(get_git_dir());
-	if (!work_tree || chdir(work_tree))
+	if (!work_tree || chdir_notify(work_tree))
 		die(_("this operation must be run in a work tree"));
 
 	/*
@@ -401,7 +399,6 @@ void setup_work_tree(void)
 	if (getenv(GIT_WORK_TREE_ENVIRONMENT))
 		setenv(GIT_WORK_TREE_ENVIRONMENT, ".", 1);
 
-	set_git_dir(remove_leading_path(git_dir, work_tree));
 	initialized = 1;
 }
 
-- 
2.17.0.rc2.594.gdb94a0ce02
Previous: Jeff KingNext: Jeff King
Message 34 of 54 in “git complains packed-refs is not a directory when used with GIT_DIR and GIT_WORK_TREE envvars.”
  1. Rafael AscensaoMar 26, 2018
  2. Ævar Arnfjörð BjarmasonMar 26, 2018
  3. Jeff KingMar 27, 2018
  4. Duy NguyenMar 27, 2018
  5. Jeff KingMar 27, 2018
  6. Duy NguyenMar 27, 2018
  7. Duy NguyenMar 27, 2018
  8. Jeff KingMar 28, 2018
  9. Duy NguyenMar 28, 2018
  10. Jeff KingMar 28, 2018
  11. 1/4 set_git_dir: die when setenv() failsJeff King, Mar 28, 2018
  12. 2/4 add chdir-notify APIJeff King, Mar 28, 2018
  13. Eric SunshineMar 28, 2018
  14. Jeff KingMar 28, 2018
  15. Duy NguyenMar 29, 2018
  16. Jeff KingMar 29, 2018
  17. Duy NguyenMar 29, 2018
  18. 3/4 set_work_tree: use chdir_notifyJeff King, Mar 28, 2018
  19. Duy NguyenMar 29, 2018
  20. Duy NguyenMar 29, 2018
  21. Jeff KingMar 29, 2018
  22. Jeff KingMar 29, 2018
  23. Duy NguyenMar 29, 2018
  24. Jeff KingMar 30, 2018
  25. 4/4 refs: use chdir_notify to update cached relative pathsJeff King, Mar 28, 2018
  26. 0/5 re-parenting relative directories after chdirJeff King, Mar 30, 2018
  27. 1/5 set_git_dir: die when setenv() failsJeff King, Mar 30, 2018
  28. 2/5 trace.c: export trace_setup_keyJeff King, Mar 30, 2018
  29. Junio C HamanoMar 30, 2018
  30. Jeff KingMar 30, 2018
  31. Junio C HamanoMar 30, 2018
  32. Jeff KingMar 30, 2018
  33. 3/5 add chdir-notify APIJeff King, Mar 30, 2018
  34. 4/5 set_work_tree: use chdir_notifyJeff King, Mar 30, 2018
  35. 5/5 refs: use chdir_notify to update cached relative pathsJeff King, Mar 30, 2018
  36. Duy NguyenMar 30, 2018
  37. Jeff KingMar 28, 2018
  38. 0/8 Re: git complains packed-refs is not a directory when used with GIT_DIR and GIT_WORK_TREE envvars.Nguyễn Thái Ngọc Duy, Mar 28, 2018
  39. 1/8 strbuf.c: add strbuf_ensure_trailing_dr_sep()Nguyễn Thái Ngọc Duy, Mar 28, 2018
  40. 2/8 strbuf.c: reintroduce get_pwd_cwd() (with strbuf_ prefix)Nguyễn Thái Ngọc Duy, Mar 28, 2018
  41. Stefan BellerMar 28, 2018
  42. Duy NguyenMar 28, 2018
  43. 3/8 trace.c: export trace_setup_keyNguyễn Thái Ngọc Duy, Mar 28, 2018
  44. 4/8 setup.c: introduce setup_adjust_path()Nguyễn Thái Ngọc Duy, Mar 28, 2018
  45. 5/8 setup.c: allow other code to be notified when $CWD movesNguyễn Thái Ngọc Duy, Mar 28, 2018
  46. 6/8 environment.c: adjust env containing relpath when $CWD is movedNguyễn Thái Ngọc Duy, Mar 28, 2018
  47. Jeff KingMar 28, 2018
  48. Duy NguyenMar 28, 2018
  49. 8/8 refs: adjust main repo paths when $CWD movesNguyễn Thái Ngọc Duy, Mar 28, 2018
  50. 7/8 repository: adjust repo paths when $CWD movesNguyễn Thái Ngọc Duy, Mar 28, 2018
  51. Jeff KingMar 28, 2018
  52. Duy NguyenMar 29, 2018
  53. Jeff KingMar 30, 2018
  54. Junio C HamanoMar 28, 2018

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.