git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH 10/18] send-pack: refactor inspecting and resetting status and sending commands

From
Junio C Hamano <gitster@pobox.com>
Date
Aug 19, 2014, 22:06 UTC
Message-ID
<1408485987-3590-11-git-send-email-gitster@pobox.com>
In-Reply-To
<1408485987-3590-1-git-send-email-gitster@pobox.com>

The main loop over remote_refs list inspects the ref status to see if we need to generate pack data (i.e. a delete-only push does not need to send any additional data), resets it to "expecting the status report" state, and formats the actual update commands to be sent.

Split the former two out of the main loop, as it will become conditional in later steps.

Besides, we should have code that does real thing here, before the "Finally, tell the other end!" part ;-)

Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
 send-pack.c | 49 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 19 deletions(-)
diff --git a/send-pack.c b/send-pack.c
index 590eb0a..f3262f2 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -274,7 +274,8 @@ int send_pack(struct send_pack_args *args,
 		advertise_shallow_grafts_buf(&req_buf);
 
 	/*
-	 * Finally, tell the other end!
+	 * Clear the status for each ref and see if we need to send
+	 * the pack data.
 	 */
 	for (ref = remote_refs; ref; ref = ref->next) {
 		if (!ref_update_to_be_sent(ref, args))
@@ -283,25 +284,35 @@ int send_pack(struct send_pack_args *args,
 		if (!ref->deletion)
 			need_pack_data = 1;
 
-		if (args->dry_run) {
+		if (args->dry_run || !status_report)
 			ref->status = REF_STATUS_OK;
-		} else {
-			char *old_hex = sha1_to_hex(ref->old_sha1);
-			char *new_hex = sha1_to_hex(ref->new_sha1);
-
-			if (!cmds_sent)
-				packet_buf_write(&req_buf,
-						 "%s %s %s%c%s",
-						 old_hex, new_hex, ref->name, 0,
-						 cap_buf.buf);
-			else
-				packet_buf_write(&req_buf, "%s %s %s",
-						 old_hex, new_hex, ref->name);
-			ref->status = status_report ?
-				REF_STATUS_EXPECTING_REPORT :
-				REF_STATUS_OK;
-			cmds_sent++;
-		}
+		else
+			ref->status = REF_STATUS_EXPECTING_REPORT;
+	}
+
+	/*
+	 * Finally, tell the other end!
+	 */
+	for (ref = remote_refs; ref; ref = ref->next) {
+		char *old_hex, *new_hex;
+
+		if (args->dry_run)
+			continue;
+
+		if (!ref_update_to_be_sent(ref, args))
+			continue;
+
+		old_hex = sha1_to_hex(ref->old_sha1);
+		new_hex = sha1_to_hex(ref->new_sha1);
+		if (!cmds_sent)
+			packet_buf_write(&req_buf,
+					 "%s %s %s%c%s",
+					 old_hex, new_hex, ref->name, 0,
+					 cap_buf.buf);
+		else
+			packet_buf_write(&req_buf, "%s %s %s",
+					 old_hex, new_hex, ref->name);
+		cmds_sent++;
 	}
 
 	if (args->stateless_rpc) {
-- 
2.1.0-301-g54593e2
Previous: Junio C HamanoNext: Junio C Hamano
Message 13 of 59 in “Signed push”
  1. 00/18 Signed pushJunio C Hamano, Aug 19, 2014
  2. 01/18 receive-pack: do not overallocate command structureJunio C Hamano, Aug 19, 2014
  3. 02/18 receive-pack: parse feature request a bit earlierJunio C Hamano, Aug 19, 2014
  4. Junio C HamanoAug 19, 2014
  5. 03/18 receive-pack: do not reuse old_sha1[] to other thingsJunio C Hamano, Aug 19, 2014
  6. Junio C HamanoAug 19, 2014
  7. 04/18 receive-pack: factor out queueing of commandJunio C Hamano, Aug 19, 2014
  8. 05/18 send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higherJunio C Hamano, Aug 19, 2014
  9. 06/18 send-pack: refactor decision to send update per refJunio C Hamano, Aug 19, 2014
  10. 07/18 send-pack: always send capabilitiesJunio C Hamano, Aug 19, 2014
  11. 08/18 send-pack: factor out capability string generationJunio C Hamano, Aug 19, 2014
  12. 09/18 send-pack: rename "new_refs" to "need_pack_data"Junio C Hamano, Aug 19, 2014
  13. 10/18 send-pack: refactor inspecting and resetting status and sending commandsJunio C Hamano, Aug 19, 2014
  14. 11/18 send-pack: clarify that cmds_sent is a booleanJunio C Hamano, Aug 19, 2014
  15. 12/18 gpg-interface: move parse_gpg_output() to where it should beJunio C Hamano, Aug 19, 2014
  16. 13/18 gpg-interface: move parse_signature() to where it should beJunio C Hamano, Aug 19, 2014
  17. 14/18 pack-protocol doc: typofix for PKT-LINEJunio C Hamano, Aug 19, 2014
  18. 15/18 the beginning of the signed pushJunio C Hamano, Aug 19, 2014
  19. brian m. carlsonAug 20, 2014
  20. Bert WesargAug 20, 2014
  21. Junio C HamanoAug 20, 2014
  22. 16/18 receive-pack: GPG-validate push certificatesJunio C Hamano, Aug 19, 2014
  23. David TurnerAug 20, 2014
  24. Junio C HamanoAug 20, 2014
  25. David TurnerAug 20, 2014
  26. Junio C HamanoAug 20, 2014
  27. David TurnerAug 21, 2014
  28. Junio C HamanoAug 22, 2014
  29. 17/18 send-pack: send feature request on push-cert packetJunio C Hamano, Aug 19, 2014
  30. 18/18 signed push: final protocol updateJunio C Hamano, Aug 19, 2014
  31. Shawn PearceAug 21, 2014
  32. Junio C HamanoAug 21, 2014
  33. Kyle J. McKayAug 22, 2014
  34. Junio C HamanoAug 22, 2014
  35. Shawn PearceAug 22, 2014
  36. Junio C HamanoAug 25, 2014
  37. Shawn PearceAug 26, 2014
  38. Junio C HamanoAug 26, 2014
  39. Junio C HamanoAug 26, 2014
  40. Junio C HamanoSep 4, 2014
  41. Shawn PearceSep 5, 2014
  42. Junio C HamanoAug 22, 2014
  43. David TurnerAug 22, 2014
  44. Duy NguyenAug 19, 2014
  45. Junio C HamanoAug 19, 2014
  46. Nico WilliamsAug 20, 2014
  47. Junio C HamanoAug 20, 2014
  48. Junio C HamanoAug 20, 2014
  49. Junio C HamanoAug 20, 2014
  50. Nico WilliamsAug 20, 2014
  51. Stefan BellerAug 22, 2014
  52. Junio C HamanoAug 22, 2014
  53. Stefan BellerAug 22, 2014
  54. Junio C HamanoAug 22, 2014
  55. Stefan BellerAug 22, 2014
  56. Junio C HamanoAug 22, 2014
  57. Stefan BellerAug 22, 2014
  58. Junio C HamanoAug 25, 2014
  59. Jason PyeronAug 25, 2014

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.