Re: [PATCH 2/2] doc: add new Git tutorial for beginners
- From
Julia Evans <julia@jvns.ca>
- Date
- Oct 19, 2026, 14:24 UTC
- Message-ID
- <3a38b208-2640-46a9-b486-9be614d71480@app.fastmail.com>
- In-Reply-To
- <CALnO6CB0ApqKSfdmnekS7NKATJL4WrP4jpNBfryoOGKsFrz7+Q@mail.gmail.com>
On Wed, Oct 7, 2026, at 3:48 PM, D. Ben Knoble wrote:
Show 63 quoted lines
> On Tue, Oct 6, 2026 at 3:37 PM Julia Evans via GitGitGadget > <gitgitgadget@gmail.com> wrote: >> >> From: Julia Evans <julia@jvns.ca> >> >> This tutorial covers: >> >> 1. Creating an empty repo with `git init` >> 2. Making commits with `git add`, `git commit`, `git diff`, and >> `git status` >> 3. Pushing to code to a Git host on the internet, including creating an >> SSH key >> >> Signed-off-by: Julia Evans <julia@jvns.ca> >> --- >> Documentation/gittutorial.adoc | 616 +++++++++++++++++++++++++++++++++ >> 1 file changed, 616 insertions(+) >> create mode 100644 Documentation/gittutorial.adoc >> >> diff --git a/Documentation/gittutorial.adoc b/Documentation/gittutorial.adoc >> new file mode 100644 >> index 0000000000..617dbae096 >> --- /dev/null >> +++ b/Documentation/gittutorial.adoc >> @@ -0,0 +1,616 @@ >> +gittutorial(7) >> +============== >> + >> +NAME >> +---- >> +gittutorial - Introduction to Git for beginners >> + >> +DESCRIPTION >> +----------- >> + >> +This tutorial explains how to import a project's code into Git, make >> +changes to it, and upload the project to the Internet. >> + >> +We'll show you how to use the commands `git commit`, `git add`, >> +`git diff`, `git status`, and `git push`. >> + >> +Command line vs GUI >> +------------------- >> + >> +Git is a command line program, but there are many excellent GUIs for >> +Git built by the community. For example, if you use an IDE to edit your >> +code, it might already have a built-in Git integration that you can use. >> + >> +In this tutorial, we'll give instructions for the command line version >> +of Git, but you can also follow along in a GUI. You can also do some >> +tasks in a GUI and some tasks on the command line. It's up to you. > > Since we assume a *nix-ish environment, should we mention that this > tutorial works best on UNIX-like OSs, or in a Git-for-Windows Bash > environment, and may need adapting for folks using PowerShell, CMD, or > some other userspace (not a piece of jargon I would use here, > probably)? Or does that get covered incidentally by the installation > instructions? > > I'm especially thinking of not confusing a user who sees something > different or doesn't have an "ls", "cd", etc. (Maybe my Windows > command line knowledge is shoddy, though, and those parts just kind of > work close enough for our purposes?)
Yes, great idea, this also inspired me to recruit more Windows testers. Added a mention of Git Bash.
Show 19 quoted lines
>> + >> +What we'll be doing >> +------------------- >> + >> +Git lets you take snapshots of your code, like a checkpoint in a video >> +game. In this tutorial we're going to explain a very basic Git >> +workflow, which is: >> + >> +1. Create an empty folder >> +2. Start using Git to manage the code in that folder >> +3. Create 2 files and tell Git to save a snapshot of them >> +4. Make changes to one of the files >> +5. Tell Git to take another snapshot >> +6. Repeat steps 4-5 any time you want to update your code > > I'm very tempted to nitpick "folder" vs "directory," but I'm not sure > it's worth our time or that of the target audience :) Just note that, > while "git grep folder" finds way more hits than I was expecting, it > seems the primary use in our documentation is in reference to IMAP.
Yeah, I thought this might come up :) I don't have very strong feelings here.
Show 190 quoted lines
>> +We'll also explain how to use Git to put your code on the Internet.
>> +
>> +Step 1: Make sure Git is installed
>> +----------------------------------
>> +
>> +To do this tutorial, you'll need:
>> +
>> +1. Git to be installed. You might already have it installed,
>> + and if not there are directions at https://git-scm.com/install/
>> +2. A folder on your computer with code that you want to start managing
>> + with Git.
>> +
>> +You can check if Git is installed by running this in your terminal:
>> +
>> +------------------------------------------------
>> +$ git --version
>> +------------------------------------------------
>> +
>> +[[step_2]]
>> +Step 2: Introduce yourself to Git
>> +---------------------------------
>> +
>> +The first time you use Git on a computer, it's a good idea to tell Git
>> +your name and public email address. If you don't, you'll get a lot of
>> +warnings from Git. To do this, run:
>> +
>> +------------------------------------------------
>> +$ git config --global user.name "Namey McName"
>> +$ git config --global user.email you@example.com
>> +------------------------------------------------
>> +
>> +The name and email is so that other people you're collaborating with can
>> +know who made the changes. You can set them to anything you want.
>> +
>> +To check if the name and email have been set, you can run these
>> +commands:
>> +
>> +------------------------------------------------
>> +$ git config user.name
>> +$ git config user.email
>> +------------------------------------------------
>
> Ought we recommend the newer forms (git config set, git config get)?
> Or is the idea to remain compatible with older versions, such as the
> 2.32 I happen to have in /usr/bin on unsupported macOS 12.7.6 from
> very old (?) XCode?
>
>> +
>> +Set your default branch name to `main`, by running this command.
>> +Git is going to change its default branch name to `main` soon, so this
>> +sets you up well for the future.
>> +
>> +------------------------------------------------
>> +$ git config --global init.defaultBranch main
>> +------------------------------------------------
>> +
>> +If there's no output, then it succeeded.
>> +
>> +Step 3: Create an empty folder and 2 files
>> +------------------------------------------
>> +
>> +In your terminal, create an empty folder and change directories into it.
>> +Later on you could follow the same steps in this tutorial to take an
>> +existing project and start managing it with Git, but we're going to use
>> +an empty project so that everyone following this tutorial has the exact
>> +same files.
>> +
>> +For example, run these commands to make a folder called `myproject`
>> +
>> +------------------------------------------------
>> +$ mkdir myproject
>> +$ cd myproject
>> +------------------------------------------------
>
> I don't know, and I'll probably bias towards what you've already
> written over asking for changes, but: does it make things any easier
> to read and follow along with if we "git init myproject" instead?
> Perhaps this version plants the seed that it's not too late to start
> tracking any existing project, though, which is valuable :)
>
> I wonder if you had some rationale for choosing this particular
> sequence? Just curious, now.
>
>> +Create 2 files in this directory, so we have something to work with.
>> +
>> +Make a file called README.md, with these contents:
>> +
>> +------------------------------------------------
>> +We're doing a Git tutorial!
>> +We need 2 lines in this file so here's a second one
>> +------------------------------------------------
>> +
>> +And a file called `hello.py`, with these contents:
>> +
>> +------------------------------------------------
>> +print("hello world")
>> +------------------------------------------------
>> +
>> +Save the two files and keep them open in your text editor so you can
>> +easily edit them later. The exact contents aren't too important, but
>> +we'll use those contents in the example output later.
>> +
>> +You can check that the files are in the right place by running `ls`,
>> +like this:
>> +
>> +
>> +------------------------------------------------
>> +$ ls
>> +------------------------------------------------
>> +
>> +The output should be like this:
>> +
>> +------------------------------------------------
>> +hello.py
>> +README.md
>> +------------------------------------------------
>> +
>> +Step 4: Create a Git repository
>> +-------------------------------
>> +
>> +A Git repository is a folder which stores snapshots. It's usually a
>> +hidden folder called `.git`. Every time you take a snapshot, Git stores
>> +a copy of the contents of every file you're tracking.
>> +
>> +This might feel unbelievable, but Git uses compression so you can easily
>> +store tens of thousands of snapshots without using too much disk space.
>> +
>> +You can create a Git repository for any folder in your computer by
>> +running the command `git init`.
>> +
>> +Run `git init` in the folder you just created, like this:
>> +
>> +------------------------------------------------
>> +$ git init
>> +------------------------------------------------
>> +
>> +Git will reply:
>> +
>> +------------------------------------------------
>> +Initialized empty Git repository in .git/
>> +------------------------------------------------
>> +
>> +You might notice a new hidden folder was created, named `.git`.
>> +
>> +Step 5: Take your first snapshot
>> +--------------------------------
>> +
>> +Next, we're going to take a snapshot of all the files in the directory
>> +and tell Git to store them. Taking a snapshot in Git is a two step
>> +process: first you need to run `git add` and then `git commit`.
>> +
>> +The reason it's a two step process is that sometimes you might not
>> +actually want Git to store a snapshot of _all_ the files in a folder.
>> +For example, if you have a file full of private personal information
>> +called `personal.csv`, and a Python script called `process_data.py`, you
>> +might want Git to keep a snapshot of the Python script but not the
>> +private data.
>> +
>> +For now, we're going to store a snapshot of every file in your folder,
>> +as well as in every subfolder.
>> +
>> +The first step of creating a snapshot is to tell Git which files you
>> +want to include in the next snapshot using `git add`. To tell Git
>> +"include all files", run this command:
>> +
>> +------------------------------------------------
>> +$ git add .
>> +------------------------------------------------
>> +
>> +Next you can create the snapshot using the `git commit` command, like
>> +this. The `-m` flag stands for "message", and it lets you set a reminder
>> +for your future self of what you were doing. The message ("Initial
>> +commit" in this example) can say anything you want.
>> +
>> +------------------------------------------------
>> +$ git commit -m "Initial commit"
>> +------------------------------------------------
>> +
>> +You've now stored the first version of your project in Git! From now on
>> +we're going to use the word "commit" instead of "snapshot", since that's
>> +the term Git uses.
>
> I know we want to limit scope… but I would love to not accidentally
> encourage more use of "-m" for short (often useless?) messages.
> Unfortunately, that drags in the can of worms that is editor
> configuration. At least we can maybe point to
> https://git-scm.com/book/en/v2/Getting-Started-First-Time-Git-Setup#_editor
> and
> https://git-scm.com/book/en/v2/Appendix-C:-Git-Commands-Setup-and-Config#ch_core_editor
> ? idk.Definitely editor configuration is an issue. I haven't worked out where to put this yet. I think it's very important to warn users that Git will put you into `vim` by default, because I think a lot of new Git users will not be comfortable with vim. Feels like a sticky situation and I still don't quite know what advice to give people if they aren't comfortable with a terminal text editor. I think the options are:
- only use `-m` and only write short messages - use something like `nano` - use a GUI interface to Git instead, which lets you write commit messages in a more familiar interface
I don't think we should be prescriptive about commit message length since the importance of this really depends on the context.
Show 62 quoted lines
>> +Step 6: Make a change >> +--------------------- >> + >> +Now, let's learn how to make a change to a file and review the change you made. >> +In this example, we'll update the file `README.md`, but you can edit a >> +different file. >> + >> +First open `README.md` in your favourite text editor, make a tiny or >> +silly change, and save it. >> + >> +Next, in the terminal, run the command `git status` to get a summary of >> +what you changed since the last Git commit. >> + >> +------------------------------------------------ >> +$ git status >> +------------------------------------------------ >> + >> +The output will look something like this: >> + >> +------------------------------------------------ >> +On branch main >> + >> +Changes not staged for commit: >> + (use "git add <file>..." to update what will be committed) >> + (use "git restore <file>..." to discard changes in working directory) >> + modified: README.md >> +------------------------------------------------ >> + >> +This output says that we've changed `README.md` since the last time >> +we committed. >> + >> +Next, if you want to see the details of how you've changed `README.md`, >> +you can run `git diff`. >> + >> +------------------------------------------------ >> +$ git diff >> +------------------------------------------------ >> + >> +The output will look something like this: >> + >> +------------------------------------------------ >> +diff --git a/README.md b/README.md >> +index 7ebaecb3..5a4ff712 100644 >> +--- a/README.md >> ++++ b/README.md >> +@@ -1,2 +1,2 @@ >> + Here are some Python scripts! >> ++I hope you like them. >> +------------------------------------------------ >> + >> +This output says that we added one line, saying "I hope you like them.". >> +By default Git will show the lines you removed in red, and the lines you >> +added in green. > > I would perhaps prefer to focus on the leading sigils (-, +) than the > color, if only because colorblindness can lead to all sorts of > situations with different color setups in the terminal's palette or > even (probably not our target audience) Git configuration. We could > probably mention that Git shows added and removed lines in *different* > colors without being too concerned with which colors those are? (That > avoids having to twist our words like "your terminal palette's green > and red" or w/e.)
Thanks, updated to mention the + and -.
Show 217 quoted lines
>> +
>> +Step 7: Make another commit (easy way)
>> +--------------------------------------
>> +
>> +Now let's tell Git to save the new version of `README.md` by making
>> +another commit! To tell Git to snapshot all files that Git is tracking
>> +and commit them, run this command:
>> +
>> +------------------------------------------------
>> +$ git commit -am "Update README"
>> +------------------------------------------------
>> +
>> +This is similar to the two step process in Step 4 where we used `git
>> +add` and `git commit` to make a commit, but with a shortcut that lets
>> +you do both in just one command. The `-a` stands for "all".
>> +
>> +Step 7b: Make another commit (longer way)
>> +-----------------------------------------
>> +
>> +`git commit -am` is a fast way to snapshot all the files that Git is
>> +tracking. But if you want Git to ignore changes to certain files, you
>> +can instead do a 2-step process like in Step 4 where first you run `git
>> +add` for every file that's been changed and that you want to include in
>> +the next commit, like this:
>> +
>> +------------------------------------------------
>> +$ git add README.md
>> +------------------------------------------------
>> +
>> +and then run `git commit` (without the `-a`), like this:
>> +
>> +------------------------------------------------
>> +$ git commit -m "Update README"
>> +------------------------------------------------
>> +
>> +Step 8: Make a change and throw it away
>> +---------------------------------------
>> +
>> +One of the most useful things about Git is that it lets you safely
>> +experiment: you never need to be scared to change your code because you
>> +can always go back to the old version.
>> +
>> +Before starting to experiment, run `git status` to check the current
>> +state of your Git repository:
>> +
>> +------------------------------------------------
>> +$ git status
>> +On branch main
>> +
>> +nothing to commit, working tree clean
>> +------------------------------------------------
>> +
>> +This "working tree clean" message means that there haven't been any
>> +changes since your last commit.
>> +
>> +Now make a change to your code, and run `git status` again. Like last
>> +time, you should see a message like this:
>> +
>> +------------------------------------------------
>> +$ git status
>> +On branch main
>> +
>> +Changes not staged for commit:
>> + (use "git add <file>..." to update what will be committed)
>> + (use "git restore <file>..." to discard changes in working directory)
>> + modified: README.md
>> +------------------------------------------------
>> +
>> +This tells us that `README.md` has been changed since the last commit.
>> +But we don't actually want this change, so let's undo it! We can restore
>> +`README.md` back to how it was at the most recent commit using the `git
>> +restore` command.
>> +
>> +**WARNING**: `git restore` can't be reversed! Any time you run it it's
>> +important to be absolutely sure that you're okay with throwing away your
>> +changes since the last commit.
>> +
>> +------------------------------------------------
>> +$ git restore README.md
>> +------------------------------------------------
>> +
>> +Now open `README.md` again. You should see that your changes have been undone.
>> +
>> +You can stop here!
>> +------------------
>> +
>> +The commands we've learned so far (`git init`, `git add`, `git commit`,
>> +`git diff`, `git status`, and `git restore`) are enough to get a lot out
>> +of Git on their own.
>> +
>> +With these commands, you can keep copies of past versions of your code
>> +on your computer and safely experiment with big changes to your code.
>> +
>> +When using Git this way, all of your code just lives on your computer.
>> +But if you want to put your code on the Internet so that other people
>> +can use it or back it up, then you'll need to learn about one more
>> +command: `git push`.
>> +
>> +The rest of this tutorial is about how to upload your code to a Git
>> +repository on the Internet. The high level process is:
>> +
>> +1. Create an account on the Git host
>> +2. Configure Git so that it can login to the Git host to make changes
>> +3. Run `git push origin main` to upload your code
>> +
>> +Navigating the Git host's UI can be tricky, and it's hard for us to
>> +give you exact directions because the UIs change a lot.
>> +
>> +Step 9: Create an account on a Git host
>> +---------------------------------------
>> +
>> +To put your code on the Internet, you need it to be hosted somewhere.
>> +The easiest way to do this is to sign up with a Git host. There's a list
>> +of Git hosts (many of them offer free accounts) at
>> +https://git-scm.com/tools/hosting. GitHub and GitLab are two popular hosts.
>> +
>> +If you're comfortable running a server, there are other ways to host
>> +a Git repository on the internet, like connecting through SSH or open
>> +source Git forge software to your server.
>> +
>> +Step 10: Create an SSH key (if needed)
>> +-------------------------------------
>> +
>> +For Git to upload changes to another Git repository, it needs a way to
>> +login to that repository. One of the most popular ways to do this is
>> +with an SSH key.
>> +
>> +If you don't already have an SSH key, you'll need to create one. On Mac
>> +or Linux, you can check if you already have an SSH key by running:
>> +
>> +-------------------------------------------
>> +$ ls ~/.ssh/*.pub
>> +-------------------------------------------
>> +
>> +If you don't already have an SSH key, run:
>> +
>> +-------------------------------------------
>> +$ ssh-keygen
>> +-------------------------------------------
>> +
>> +`ssh-keygen` will ask you for some details.
>> +The easiest way to do this is to just press Enter at every prompt until
>> +it's done.
>> +
>> +NOTE: All of the advice about how to use SSH in this tutorial is aimed
>> +at getting it to work as quickly as possible. Setting up SSH in a secure
>> +way is very far outside the scope of this tutorial. If you have a
>> +security team in your organization, they might have very different
>> +opinions about the appropriate way to configure authentication with Git.
>> +
>> +Step 11: Tell the Git host your SSH public key
>> +----------------------------------------------
>> +
>> +First, find your SSH key like this (on Mac or Linux):
>> +
>> +-------------------------------------------
>> +$ ls ~/.ssh/*.pub
>> +-------------------------------------------
>> +
>> +That will output something like
>> +
>> +-------------------------------------------
>> +/home/alice/.ssh/id_ed25519.pub
>> +-------------------------------------------
>> +
>> +Copy the contents of that file to your clipboard. It's important that
>> +the filename ends in `.pub` ("pub" stands for "public").
>> +
>> +Then login to your account on the Git host you chose and paste the SSH
>> +key into the appropriate place. Depending on the Git host, it's likely
>> +under "SSH keys" in your settings. If it asks you what type of SSH key,
>> +look for something like "Authentication Key".
>> +
>> +Once you've done this, you're done! Git will automatically use your SSH
>> +key to try to connect.
>> +
>> +Step 12: Create an empty Git repository on the Git host
>> +-------------------------------------------------------
>> +
>> +Go to the Git host's website and create a new Git repository.
>> +
>> +**WARNING**: If you create a public repository and push your repository
>> +to it, then your name and email address, as well as the contents of
>> +any files you committed and every previous version of those files, will
>> +be on the public internet. Some Git hosts have the option to create
>> +a private repository instead, to keep your information private.
>> +
>> +Step 13: Find the address of the repository
>> +-------------------------------------------
>> +
>> +Now, find the address of the repository on your Git host. It should look
>> +something like this:
>> +
>> +-------------------------------------------
>> +git@git.example.com:username/repo.git
>> +-------------------------------------------
>> +
>> +(where `example.com`, `username` and `repo` will be replaced with the
>> +actual values).
>> +
>> +If you can only find an address starting with `https://`, then
>> +you can often translate it to the SSH format by replacing `https://`
>> +with `git@` and replacing the `/` after the domain name with an `:`.
>> +Here's how:
>> +
>> +-------------------------------------------
>> +https://git.example.com/username/repo
>> +^^^^^^^^ ^
>> +replace with "git@" replace with ":"
>> +-------------------------------------------
>
> This is, of course, forge- and remote- dependent :) but I think it's
> *probably* ok for the tutorial.
>
> When you mentioned HTTPS-to-SSH translation, I was thinking of the
> config-based URL rewrite mechanism, aha! I definitely don't think we
> should go there ;)Yeah, I thought about the config-based rewrites too and I don't think we should mention it either :)
Show 41 quoted lines
>> + >> +Step 14: push your changes >> +-------------------------- >> + >> +Finally, we're ready to send the information in your local Git repository >> +to the one on the internet! >> + >> +First, tell Git about the other repository by running `git remote add` >> +in your terminal >> +(replace `git@example.com:username/repo.git` with the actual address): >> + >> +------------------------------------------- >> +$ git remote add origin git@example.com:username/repo.git >> +------------------------------------------- >> + >> +This tells Git to save the URL `git@example.com:username/repo.git` in >> +your Git repository's configuration under the name `origin`, so that you >> +can use it later. If you make a mistake while doing this, you can run >> +`git remote remove origin` and try again. >> + >> +Then tell Git to send the information, with `git push` >> +(if this doesn't work, read the "Troubleshooting `git push`" section for advice!): >> + >> +------------------------------------------- >> +$ git push -u origin main >> +------------------------------------------- >> + >> +`origin` refers to the URL we just added (`git@example.com:username/repo.git`), >> +and `main` is the name of your current Git branch. You can use any name >> +(not just `origin`), but using `origin` often makes things easier >> +because it's the default for `git push` and `git pull`. >> +We haven't covered branches yet, but `main` is the default branch name. > > I'm not sure if we should recommend "-u" without being able to explain > what it does, and… well… you and I have discussed how that's difficult > :) > > Doesn't the tutorial's recipe of always using "git push origin main" > work just fine? And if we later introduce pull and other > branch-/remote-stuff that cares about upstreams, we can mention this > shorthand then?
Yeah, many people asked what `-u` stands for, we added an explanation. TBD how well that explanation lands though.
Show 120 quoted lines
>> + >> +Any time you want to set up a new repository, you can repeat steps >> +11-13, with one exception: you only need to pass `-u` the first time >> +you push. Afterwards you can just run the command: >> + >> +------------------------------------------- >> +$ git push origin main >> +------------------------------------------- >> + >> +It should output something like this: >> + >> +------------------------------------------- >> +To example.com:example_username/example >> + * [new branch] main -> main >> +------------------------------------------- >> + >> +Troubleshooting `git push` >> +-------------------------- >> + >> +There are 3 main errors you might run into when running `git push origin main`. >> +Getting errors when running `git push` is actually a big part of using >> +Git, so congratulations! If you get to this part of the tutorial, you >> +get a little bonus experience in debugging. >> + >> +Here's a guide to why they're happening and how to fix them. >> + >> +**Problem 1**: You pushed to `main`, but your branch actually isn't called `main` >> + >> +Here's the error: >> +``` >> +$ git push origin main >> +error: src refspec main does not match any >> +``` >> + >> +This might happen if you didn't set `init.defaultBranch` to `main` in >> +<<step_2,Step 2>>. >> + >> +If you want to check the name of your current branch, you can run `git >> +status`. For example, in this output, the current branch is "master". >> + >> +------------------------------------------- >> +$ git status >> +On branch master >> + >> +... >> +------------------------------------------- >> + >> +To push your branch, you have a few options: >> + >> +* rename your branch to `main`, by running `git branch -m main` >> + and then run `git push origin main` >> +* run `git push origin master` >> + (where `master` is the name of your actual current branch) >> + >> +**Problem 2: SSH error** >> + >> +Here's the error: >> + >> +----- >> +$ git push origin main >> +The authenticity of host 'github.com (140.82.116.3)' can't be established. >> +ED25519 key fingerprint is: SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU >> +This key is not known by any other names. >> +Are you sure you want to continue connecting (yes/no/[fingerprint])? >> +----- >> + >> +Git uses SSH to connect during `git push`, and this message happens when >> +SSH connects to a new site that you haven't connected to before. >> + >> +The easiest way to handle this is to type "yes" and press Enter. >> + >> +**Problem 3: the repository already exists** >> + >> +Here's the error: >> + >> +--------------------- >> +$ git push origin main >> +! [rejected] main -> main (fetch first) >> +error: failed to push some refs to 'example.com:example/example.git' >> +hint: Updates were rejected because the remote contains work that you do not >> +hint: have locally. >> +--------------------- >> + >> +If you see an error like this, it means that when you created the >> +repository on your Git host, it created a repository with a file in it >> +to try to help you out. (that's the "work that you do not have locally" >> +in the error message) >> + >> +You can fix this either by deleting the repository and recreating it, or >> +by running: >> + >> +--------------------- >> +$ git push --force origin main >> +--------------------- >> + >> +**WARNING**: In general it's quite dangerous to use `--force` because >> +it can erase work on the online repository in a way that's difficult to >> +recover. But if you know for sure that you just created the repository 2 >> +minutes ago and there's nothing in it, then it's okay. >> + >> +MORE USEFUL GIT COMMANDS >> +------------------------ >> + >> +* To tell Git to "un-add" a file that you added by accident, run >> + `git rm --cached FILENAME` >> + >> +SEE ALSO >> +-------- >> +linkgit:git-help[1], >> + >> +GIT >> +--- >> +Part of the linkgit:git[1] suite >> -- >> gitgitgadget > > Overall I think this is excellent (and I wish bottom-post replies > encouraged saying this up front, hm). > > Thanks!
Thanks for the review!