git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH v2 10/10] hook: allow runtime enabling extensions.hookStdoutToStderr

From
Adrian Ratiu <adrian.ratiu@collabora.com>
Date
Feb 22, 2026, 00:29 UTC
Message-ID
<20260222002904.1879356-11-adrian.ratiu@collabora.com>
In-Reply-To
<20260222002904.1879356-1-adrian.ratiu@collabora.com>

Add a new config `hook.forceStdoutToStderr` which allows enabling extensions.hookStdoutToStderr by default at runtime, both for new and existing repositories.

This makes it easier for users to enable hook parallelization for hooks like pre-push by enforcing output consistency. See previous commit for a more in-depth explanation & alternatives considered.

Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
 Documentation/config/extensions.adoc |  3 ++
 Documentation/config/hook.adoc       |  6 +++
 hook.c                               | 28 ++++++++++-
 hook.h                               |  1 +
 setup.c                              | 10 ++++
 t/t1800-hook.sh                      | 69 ++++++++++++++++++++++++++++
 6 files changed, 115 insertions(+), 2 deletions(-)
diff --git a/Documentation/config/extensions.adoc b/Documentation/config/extensions.adoc
index 342734668d..b152c6f681 100644
--- a/Documentation/config/extensions.adoc
+++ b/Documentation/config/extensions.adoc
@@ -113,6 +113,9 @@ in parallel to be grouped (de-interleaved) correctly.
 +
 Defaults to disabled. When disabled, `hook.jobs` has no effect for pre-push
 hooks, which will always be run sequentially.
++
+The extension can also be enabled by setting `hook.forceStdoutToStderr`
+to `true` in the global configuration.
 
 worktreeConfig:::
 	If enabled, then worktrees will load config settings from the
diff --git a/Documentation/config/hook.adoc b/Documentation/config/hook.adoc
index aa8a949a36..7b81d2b615 100644
--- a/Documentation/config/hook.adoc
+++ b/Documentation/config/hook.adoc
@@ -65,3 +65,9 @@ This setting has no effect unless all configured hooks for the event have
 +
 This has no effect for hooks requiring separate output streams (like `pre-push`)
 unless `extensions.hookStdoutToStderr` is enabled.
+
+hook.forceStdoutToStderr::
+	A boolean that enables the `extensions.hookStdoutToStderr` behavior
+	(merging stdout to stderr for all hooks) globally. This effectively
+	forces all hooks to behave as if the extension was enabled, allowing
+	parallel execution for hooks like `pre-push`.
diff --git a/hook.c b/hook.c
index 013e41a8d6..d5675df238 100644
--- a/hook.c
+++ b/hook.c
@@ -136,6 +136,7 @@ struct hook_config_cache_entry {
  * event_jobs: event-name to per-event jobs count (heap-allocated unsigned int *,
  *             where NULL == unset).
  * jobs: value of the global hook.jobs key. Defaults to 0 if unset.
+ * force_stdout_to_stderr: value of hook.forceStdoutToStderr. Defaults to 0.
  */
 struct hook_all_config_cb {
 	struct strmap commands;
@@ -144,6 +145,7 @@ struct hook_all_config_cb {
 	struct strmap parallel_hooks;
 	struct strmap event_jobs;
 	unsigned int jobs;
+	int force_stdout_to_stderr;
 };
 
 /* repo_config() callback that collects all hook.* configuration in one pass. */
@@ -169,6 +171,10 @@ static int hook_config_lookup_all(const char *key, const char *value,
 				warning(_("hook.jobs must be positive, ignoring: 0"));
 			else
 				data->jobs = v;
+		} else if (!strcmp(subkey, "forcestdouttostderr") && value) {
+			int v = git_parse_maybe_bool(value);
+			if (v >= 0)
+				data->force_stdout_to_stderr = v;
 		}
 		return 0;
 	}
@@ -325,6 +331,7 @@ static void build_hook_config_map(struct repository *r,
 
 	cache->jobs = cb_data.jobs;
 	cache->event_jobs = cb_data.event_jobs;
+	cache->force_stdout_to_stderr = cb_data.force_stdout_to_stderr;
 
 	strmap_clear(&cb_data.commands, 1);
 	strmap_clear(&cb_data.parallel_hooks, 0); /* values are uintptr_t, not heap ptrs */
@@ -530,6 +537,20 @@ static void run_hooks_opt_clear(struct run_hooks_opt *options)
 	strvec_clear(&options->args);
 }
 
+static void hook_force_apply_stdout_to_stderr(struct repository *r,
+					      struct run_hooks_opt *options)
+{
+	int force = 0;
+
+	if (r && r->gitdir && r->hook_config_cache)
+		force = r->hook_config_cache->force_stdout_to_stderr;
+	else
+		repo_config_get_bool(r, "hook.forceStdoutToStderr", &force);
+
+	if (force)
+		options->stdout_to_stderr = 1;
+}
+
 /* Determine how many jobs to use for hook execution. */
 static unsigned int get_hook_jobs(struct repository *r,
 				  struct run_hooks_opt *options,
@@ -539,9 +560,12 @@ static unsigned int get_hook_jobs(struct repository *r,
 	unsigned int jobs;
 
 	/*
-	 * Hooks needing separate output streams must run sequentially. Next
-	 * commits will add an extension to allow parallelizing these as well.
+	 * Apply hook.forceStdoutToStderr before anything else: it affects
+	 * whether we can run in parallel or not.
 	 */
+	hook_force_apply_stdout_to_stderr(r, options);
+
+	/* Hooks needing separate output streams must run sequentially. */
 	if (!options->stdout_to_stderr)
 		return 1;
 
diff --git a/hook.h b/hook.h
index 22fc59e67a..6ea6dbca40 100644
--- a/hook.h
+++ b/hook.h
@@ -224,6 +224,7 @@ struct hook_config_cache {
 	struct strmap hooks; /* maps event name -> string_list of hooks */
 	struct strmap event_jobs; /* maps event name -> heap-allocated unsigned int * */
 	unsigned int jobs; /* hook.jobs config value; 0 if unset (defaults to serial) */
+	int force_stdout_to_stderr; /* hook.forceStdoutToStderr config value */
 };
 
 /**
diff --git a/setup.c b/setup.c
index 75f115faba..c64496adac 100644
--- a/setup.c
+++ b/setup.c
@@ -2317,6 +2317,7 @@ void initialize_repository_version(int hash_algo,
 	struct strbuf repo_version = STRBUF_INIT;
 	int target_version = GIT_REPO_VERSION;
 	int default_submodule_path_config = 0;
+	int default_hook_stdout_to_stderr = 0;
 
 	/*
 	 * Note that we initialize the repository version to 1 when the ref
@@ -2364,6 +2365,15 @@ void initialize_repository_version(int hash_algo,
 		repo_config_set(the_repository, "extensions.submodulepathconfig", "true");
 	}
 
+	repo_config_get_bool(the_repository, "hook.forceStdoutToStderr",
+			     &default_hook_stdout_to_stderr);
+	if (default_hook_stdout_to_stderr) {
+		/* extensions.hookstdouttostderr requires at least version 1 */
+		if (target_version == 0)
+			target_version = 1;
+		repo_config_set(the_repository, "extensions.hookstdouttostderr", "true");
+	}
+
 	strbuf_addf(&repo_version, "%d", target_version);
 	repo_config_set(the_repository, "core.repositoryformatversion", repo_version.buf);
 
diff --git a/t/t1800-hook.sh b/t/t1800-hook.sh
index d1a0d0a3d4..d8f60f2ced 100755
--- a/t/t1800-hook.sh
+++ b/t/t1800-hook.sh
@@ -916,4 +916,73 @@ test_expect_success 'hook.<event>.jobs still requires hook.<name>.parallel=true'
 	test_cmp expect hook.order
 '
 
+test_expect_success '`git init` respects hook.forceStdoutToStderr' '
+	test_when_finished "rm -rf repo-init" &&
+	test_config_global hook.forceStdoutToStderr true &&
+	git init repo-init &&
+	git -C repo-init config extensions.hookStdoutToStderr >actual &&
+	echo true >expect &&
+	test_cmp expect actual
+'
+
+test_expect_success '`git init` does not set extensions.hookStdoutToStderr by default' '
+	test_when_finished "rm -rf upstream" &&
+	git init upstream &&
+	test_must_fail git -C upstream config extensions.hookStdoutToStderr
+'
+
+test_expect_success '`git clone` does not set extensions.hookStdoutToStderr by default' '
+	test_when_finished "rm -rf upstream repo-clone-no-ext" &&
+	git init upstream &&
+	git clone upstream repo-clone-no-ext &&
+	test_must_fail git -C repo-clone-no-ext config extensions.hookStdoutToStderr
+'
+
+test_expect_success '`git clone` respects hook.forceStdoutToStderr' '
+	test_when_finished "rm -rf upstream repo-clone" &&
+	git init upstream &&
+	test_config_global hook.forceStdoutToStderr true &&
+	git clone upstream repo-clone &&
+	git -C repo-clone config extensions.hookStdoutToStderr >actual &&
+	echo true >expect &&
+	test_cmp expect actual
+'
+
+test_expect_success 'hook.forceStdoutToStderr enables extension for existing repos' '
+	test_when_finished "rm -rf remote-repo existing-repo" &&
+	git init --bare remote-repo &&
+	git init -b main existing-repo &&
+	# No local extensions.hookStdoutToStderr config set here
+	# so global config should apply
+	test_config_global hook.forceStdoutToStderr true &&
+	cd existing-repo &&
+	test_commit A &&
+	git remote add origin ../remote-repo &&
+	setup_hooks pre-push &&
+	git push origin HEAD >stdout.actual 2>stderr.actual &&
+	check_stdout_merged_to_stderr pre-push &&
+	cd ..
+'
+
+test_expect_success 'hook.forceStdoutToStderr enables pre-push parallel runs' '
+	test_when_finished "rm -rf repo-parallel remote-parallel" &&
+	git init --bare remote-parallel &&
+	git init repo-parallel &&
+	git -C repo-parallel remote add origin ../remote-parallel &&
+	test_commit -C repo-parallel A &&
+
+	write_sentinel_hook repo-parallel/.git/hooks/pre-push &&
+	git -C repo-parallel config hook.hook-2.event pre-push &&
+	git -C repo-parallel config hook.hook-2.command \
+	    "$(sentinel_detector sentinel hook.order)" &&
+	git -C repo-parallel config hook.hook-2.parallel true &&
+
+	git -C repo-parallel config hook.jobs 2 &&
+	git -C repo-parallel config hook.forceStdoutToStderr true &&
+
+	git -C repo-parallel push origin HEAD >out 2>err &&
+	echo parallel >expect &&
+	test_cmp expect repo-parallel/hook.order
+'
+
 test_done
-- 
2.52.0.732.gb351b5166d.dirty
Previous: Adrian RatiuNext: Adrian Ratiu
Message 21 of 113 in “Run hooks in parallel”
  1. 0/4 Run hooks in parallelAdrian Ratiu, Feb 4, 2026
  2. 1/4 config: add a repo_config_get_uint() helperAdrian Ratiu, Feb 4, 2026
  3. 3/4 hook: introduce extensions.hookStdoutToStderrAdrian Ratiu, Feb 4, 2026
  4. 2/4 hook: allow parallel hook executionAdrian Ratiu, Feb 4, 2026
  5. Patrick SteinhardtFeb 11, 2026
  6. Adrian RatiuFeb 12, 2026
  7. 4/4 hook: allow runtime enabling extensions.hookStdoutToStderrAdrian Ratiu, Feb 4, 2026
  8. Phillip WoodFeb 12, 2026
  9. Adrian RatiuFeb 12, 2026
  10. Phillip WoodFeb 13, 2026
  11. Adrian RatiuFeb 13, 2026
  12. 00/10 Run hooks in parallelAdrian Ratiu, Feb 22, 2026
  13. 02/10 config: add a repo_config_get_uint() helperAdrian Ratiu, Feb 22, 2026
  14. 03/10 hook: refactor hook_config_cache from strmap to named structAdrian Ratiu, Feb 22, 2026
  15. 04/10 hook: parse the hook.jobs configAdrian Ratiu, Feb 22, 2026
  16. 06/10 hook: mark non-parallelizable hooksAdrian Ratiu, Feb 22, 2026
  17. 01/10 repository: fix repo_init() memleak due to missing _clear()Adrian Ratiu, Feb 22, 2026
  18. 05/10 hook: allow parallel hook executionAdrian Ratiu, Feb 22, 2026
  19. 08/10 hook: add per-event jobs configAdrian Ratiu, Feb 22, 2026
  20. 09/10 hook: introduce extensions.hookStdoutToStderrAdrian Ratiu, Feb 22, 2026
  21. 10/10 hook: allow runtime enabling extensions.hookStdoutToStderrAdrian Ratiu, Feb 22, 2026
  22. 07/10 hook: add -j/--jobs option to git hook runAdrian Ratiu, Feb 22, 2026
  23. 0/9 Run hooks in parallelAdrian Ratiu, Mar 9, 2026
  24. 2/9 config: add a repo_config_get_uint() helperAdrian Ratiu, Mar 9, 2026
  25. 1/9 repository: fix repo_init() memleak due to missing _clear()Adrian Ratiu, Mar 9, 2026
  26. Junio C HamanoMar 15, 2026
  27. Junio C HamanoMar 15, 2026
  28. 3/9 hook: parse the hook.jobs configAdrian Ratiu, Mar 9, 2026
  29. Junio C HamanoMar 15, 2026
  30. 5/9 hook: mark non-parallelizable hooksAdrian Ratiu, Mar 9, 2026
  31. Junio C HamanoMar 15, 2026
  32. Adrian RatiuMar 18, 2026
  33. 6/9 hook: add -j/--jobs option to git hook runAdrian Ratiu, Mar 9, 2026
  34. Junio C HamanoMar 15, 2026
  35. Adrian RatiuMar 18, 2026
  36. 4/9 hook: allow parallel hook executionAdrian Ratiu, Mar 9, 2026
  37. Junio C HamanoMar 15, 2026
  38. Adrian RatiuMar 18, 2026
  39. 7/9 hook: add per-event jobs configAdrian Ratiu, Mar 9, 2026
  40. Junio C HamanoMar 16, 2026
  41. Adrian RatiuMar 18, 2026
  42. 8/9 hook: introduce extensions.hookStdoutToStderrAdrian Ratiu, Mar 9, 2026
  43. Junio C HamanoMar 16, 2026
  44. Adrian RatiuMar 18, 2026
  45. 9/9 hook: allow runtime enabling extensions.hookStdoutToStderrAdrian Ratiu, Mar 9, 2026
  46. 0/9 Run hooks in parallelAdrian Ratiu, Mar 20, 2026
  47. 1/9 config: add a repo_config_get_uint() helperAdrian Ratiu, Mar 20, 2026
  48. 2/9 hook: parse the hook.jobs configAdrian Ratiu, Mar 20, 2026
  49. Patrick SteinhardtMar 24, 2026
  50. Adrian RatiuMar 24, 2026
  51. 4/9 hook: allow pre-push parallel executionAdrian Ratiu, Mar 20, 2026
  52. 3/9 hook: allow parallel hook executionAdrian Ratiu, Mar 20, 2026
  53. Patrick SteinhardtMar 24, 2026
  54. 5/9 hook: mark non-parallelizable hooksAdrian Ratiu, Mar 20, 2026
  55. 6/9 hook: add -j/--jobs option to git hook runAdrian Ratiu, Mar 20, 2026
  56. Patrick SteinhardtMar 24, 2026
  57. 8/9 hook: warn when hook.<friendly-name>.jobs is setAdrian Ratiu, Mar 20, 2026
  58. Patrick SteinhardtMar 24, 2026
  59. 7/9 hook: add per-event jobs configAdrian Ratiu, Mar 20, 2026
  60. Patrick SteinhardtMar 24, 2026
  61. 9/9 hook: add hook.<event>.enabled switchAdrian Ratiu, Mar 20, 2026
  62. Patrick SteinhardtMar 24, 2026
  63. Adrian RatiuMar 25, 2026
  64. Junio C HamanoMar 20, 2026
  65. Adrian RatiuMar 23, 2026
  66. Patrick SteinhardtMar 24, 2026
  67. 00/12 Run hooks in parallelAdrian Ratiu, Mar 26, 2026
  68. 01/12 repository: fix repo_init() memleak due to missing _clear()Adrian Ratiu, Mar 26, 2026
  69. 02/12 config: add a repo_config_get_uint() helperAdrian Ratiu, Mar 26, 2026
  70. 03/12 hook: parse the hook.jobs configAdrian Ratiu, Mar 26, 2026
  71. 06/12 hook: mark non-parallelizable hooksAdrian Ratiu, Mar 26, 2026
  72. 07/12 hook: add -j/--jobs option to git hook runAdrian Ratiu, Mar 26, 2026
  73. Patrick SteinhardtMar 27, 2026
  74. 05/12 hook: allow pre-push parallel executionAdrian Ratiu, Mar 26, 2026
  75. 08/12 hook: add per-event jobs configAdrian Ratiu, Mar 26, 2026
  76. 04/12 hook: allow parallel hook executionAdrian Ratiu, Mar 26, 2026
  77. 09/12 hook: warn when hook.<friendly-name>.jobs is setAdrian Ratiu, Mar 26, 2026
  78. Patrick SteinhardtMar 27, 2026
  79. 11/12 hook: add hook.<event>.enabled switchAdrian Ratiu, Mar 26, 2026
  80. 10/12 hook: move is_known_hook() to hook.c for wider useAdrian Ratiu, Mar 26, 2026
  81. Patrick SteinhardtMar 27, 2026
  82. Adrian RatiuMar 27, 2026
  83. 12/12 hook: allow hook.jobs=-1 to use all available CPU coresAdrian Ratiu, Mar 26, 2026
  84. 00/12 Run hooks in parallelAdrian Ratiu, Apr 4, 2026
  85. 02/12 config: add a repo_config_get_uint() helperAdrian Ratiu, Apr 4, 2026
  86. 01/12 repository: fix repo_init() memleak due to missing _clear()Adrian Ratiu, Apr 4, 2026
  87. 03/12 hook: parse the hook.jobs configAdrian Ratiu, Apr 4, 2026
  88. 04/12 hook: allow parallel hook executionAdrian Ratiu, Apr 4, 2026
  89. 05/12 hook: allow pre-push parallel executionAdrian Ratiu, Apr 4, 2026
  90. 06/12 hook: mark non-parallelizable hooksAdrian Ratiu, Apr 4, 2026
  91. 07/12 hook: add -j/--jobs option to git hook runAdrian Ratiu, Apr 4, 2026
  92. 08/12 hook: add per-event jobs configAdrian Ratiu, Apr 4, 2026
  93. 09/12 hook: warn when hook.<friendly-name>.jobs is setAdrian Ratiu, Apr 4, 2026
  94. 10/12 hook: move is_known_hook() to hook.c for wider useAdrian Ratiu, Apr 4, 2026
  95. 11/12 hook: add hook.<event>.enabled switchAdrian Ratiu, Apr 4, 2026
  96. 12/12 hook: allow hook.jobs=-1 to use all available CPU coresAdrian Ratiu, Apr 4, 2026
  97. Junio C HamanoApr 6, 2026
  98. Patrick SteinhardtApr 8, 2026
  99. Junio C HamanoApr 8, 2026
  100. 00/13 Run hooks in parallelAdrian Ratiu, Apr 10, 2026
  101. 01/13 repository: fix repo_init() memleak due to missing _clear()Adrian Ratiu, Apr 10, 2026
  102. 02/13 config: add a repo_config_get_uint() helperAdrian Ratiu, Apr 10, 2026
  103. 03/13 hook: parse the hook.jobs configAdrian Ratiu, Apr 10, 2026
  104. 04/13 hook: allow parallel hook executionAdrian Ratiu, Apr 10, 2026
  105. 05/13 hook: allow pre-push parallel executionAdrian Ratiu, Apr 10, 2026
  106. 06/13 hook: mark non-parallelizable hooksAdrian Ratiu, Apr 10, 2026
  107. 07/13 hook: add -j/--jobs option to git hook runAdrian Ratiu, Apr 10, 2026
  108. 08/13 hook: add per-event jobs configAdrian Ratiu, Apr 10, 2026
  109. 09/13 hook: warn when hook.<friendly-name>.jobs is setAdrian Ratiu, Apr 10, 2026
  110. 10/13 hook: move is_known_hook() to hook.c for wider useAdrian Ratiu, Apr 10, 2026
  111. 11/13 hook: add hook.<event>.enabled switchAdrian Ratiu, Apr 10, 2026
  112. 12/13 hook: allow hook.jobs=-1 to use all available CPU coresAdrian Ratiu, Apr 10, 2026
  113. 13/13 t1800: test SIGPIPE with parallel hooksAdrian Ratiu, Apr 10, 2026

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.