threads / patch / 41309

v4, 15 partsconfig: make git_config_set die on failure

Subject: [PATCH v4 00/15] config: make git_config_set die on failure

## tl;dr

26 messages between Feb 2, 2016 and Feb 8, 2016. Diffs are folded; open one to read it.

replies: 25people: 4as markdown or json

Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · lore

This is the fourth version of my patch series. Version three of these patches can be found at [1]. These patches convert the `git_config_set` family of functions such that they die by default whenever an error is encountered in persisting configs. This catches a lot of cases where we wrote configs without checking the returned status code, thus leading to inconsistent state witouth even notifying the user.

This version combines both version 2 ([2]) and version 3 of this patch series in that we first introduce `git_config_set_or_die` wrappers and converting most call sites to use these. After the conversion is done, we rename `git_config_set` to `git_config_set_gently` and adjusting remaining call sites. The last step was to rename `git_config_set_or_die` to `git_config_set` in order to get the desired default behavior.

This back-and-forth should hopefully help easing the transition and review by breaking down the actual transition into small pieces.

[1]: http://article.gmane.org/gmane.comp.version-control.git/285198 [2]: http://article.gmane.org/gmane.comp.version-control.git/285000

Patrick Steinhardt (15):
  config: introduce set_or_die wrappers
  branch: die on error in setting up tracking branch
  branch: die on config error when unsetting upstream
  branch: die on config error when editing branch description
  submodule: die on config error when linking modules
  submodule--helper: die on config error when cloning module
  remote: die on config error when setting URL
  remote: die on config error when setting/adding branches
  remote: die on config error when manipulating remotes
  clone: die on config error in cmd_clone
  init-db: die on config errors when initializing empty repo
  sequencer: die on config error when saving replay opts
  compat: die when unable to set core.precomposeunicode
  config: rename git_config_set to git_config_set_gently
  config: rename git_config_set_or_die to git_config_set
 branch.c                 | 13 +++++----
 branch.h                 |  1 +
 builtin/branch.c         |  5 ++--
 builtin/clone.c          |  2 +-
 builtin/config.c         | 28 +++++++++----------
 builtin/init-db.c        |  2 +-
 builtin/remote.c         | 70 +++++++++++++++++-------------------------------
 cache.h                  | 14 ++++++----
 compat/precompose_utf8.c |  3 ++-
 config.c                 | 52 ++++++++++++++++++++++++++---------
 submodule.c              | 10 +++----
 t/t3200-branch.sh        | 16 ++++++++++-
 t/t5505-remote.sh        |  9 +++++++
 13 files changed, 128 insertions(+), 97 deletions(-)
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 01/15] config: introduce set_or_die wrappers

A lot of call-sites for the existing family of `git_config_set` functions do not check for errors that may occur, e.g. when the configuration file is locked. In many cases we simply want to die when such a situation arises.

Introduce wrappers that will cause the program to die in those cases. These wrappers are temporary only to ease the transition to let `git_config_set` die by default. They will be removed later on when `git_config_set` itself has been replaced by `git_config_set_gently`.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 cache.h  |  4 ++++
 config.c | 27 +++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)
Show changes to 2 files +31 −0

cache.h, config.c

diff --git a/cache.h b/cache.h
index dfc459c..c1f844d 100644
--- a/cache.h
+++ b/cache.h
@@ -1508,11 +1508,15 @@ extern int git_config_maybe_bool(const char *, const char *);
 extern int git_config_string(const char **, const char *, const char *);
 extern int git_config_pathname(const char **, const char *, const char *);
 extern int git_config_set_in_file(const char *, const char *, const char *);
+extern void git_config_set_in_file_or_die(const char *, const char *, const char *);
 extern int git_config_set(const char *, const char *);
+extern void git_config_set_or_die(const char *, const char *);
 extern int git_config_parse_key(const char *, char **, int *);
 extern int git_config_key_is_valid(const char *key);
 extern int git_config_set_multivar(const char *, const char *, const char *, int);
+extern void git_config_set_multivar_or_die(const char *, const char *, const char *, int);
 extern int git_config_set_multivar_in_file(const char *, const char *, const char *, const char *, int);
+extern void git_config_set_multivar_in_file_or_die(const char *, const char *, const char *, const char *, int);
 extern int git_config_rename_section(const char *, const char *);
 extern int git_config_rename_section_in_file(const char *, const char *, const char *);
 extern const char *git_etc_gitconfig(void);
diff --git a/config.c b/config.c
index 86a5eb2..856f7d34 100644
--- a/config.c
+++ b/config.c
@@ -1831,11 +1831,22 @@ int git_config_set_in_file(const char *config_filename,
 	return git_config_set_multivar_in_file(config_filename, key, value, NULL, 0);
 }
 
+void git_config_set_in_file_or_die(const char *config_filename,
+			const char *key, const char *value)
+{
+	git_config_set_multivar_in_file_or_die(config_filename, key, value, NULL, 0);
+}
+
 int git_config_set(const char *key, const char *value)
 {
 	return git_config_set_multivar(key, value, NULL, 0);
 }
 
+void git_config_set_or_die(const char *key, const char *value)
+{
+	git_config_set_multivar_or_die(key, value, NULL, 0);
+}
+
 /*
  * Auxiliary function to sanity-check and split the key into the section
  * identifier and variable name.
@@ -2179,6 +2190,15 @@ write_err_out:
 
 }
 
+void git_config_set_multivar_in_file_or_die(const char *config_filename,
+				const char *key, const char *value,
+				const char *value_regex, int multi_replace)
+{
+	if (git_config_set_multivar_in_file(config_filename, key, value,
+					    value_regex, multi_replace) < 0)
+		die(_("Could not set '%s' to '%s'"), key, value);
+}
+
 int git_config_set_multivar(const char *key, const char *value,
 			const char *value_regex, int multi_replace)
 {
@@ -2186,6 +2206,13 @@ int git_config_set_multivar(const char *key, const char *value,
 					       multi_replace);
 }
 
+void git_config_set_multivar_or_die(const char *key, const char *value,
+			const char *value_regex, int multi_replace)
+{
+	git_config_set_multivar_in_file_or_die(NULL, key, value, value_regex,
+					       multi_replace);
+}
+
 static int section_name_match (const char *buf, const char *name)
 {
 	int i = 0, j = 0, dot = 0;
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 02/15] branch: die on error in setting up tracking branch

The setup_tracking function calls install_branch_config, which may fail writing the configuration due to a locked configuration file or other error conditions. setup_tracking can also fail when trying to track ambiguous information for a reference. While this condition is checked for and an error code is returned, this error is not checked by the caller.

Fix both issues by dying early when error occur.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 branch.c          | 19 +++++++++----------
 branch.h          |  1 +
 t/t3200-branch.sh |  9 ++++++++-
 3 files changed, 18 insertions(+), 11 deletions(-)
Show changes to 3 files +18 −11

branch.c, branch.h, t/t3200-branch.sh

diff --git a/branch.c b/branch.c
index 7ff3f20..7106369 100644
--- a/branch.c
+++ b/branch.c
@@ -64,16 +64,16 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
 	}
 
 	strbuf_addf(&key, "branch.%s.remote", local);
-	git_config_set(key.buf, origin ? origin : ".");
+	git_config_set_or_die(key.buf, origin ? origin : ".");
 
 	strbuf_reset(&key);
 	strbuf_addf(&key, "branch.%s.merge", local);
-	git_config_set(key.buf, remote);
+	git_config_set_or_die(key.buf, remote);
 
 	if (rebasing) {
 		strbuf_reset(&key);
 		strbuf_addf(&key, "branch.%s.rebase", local);
-		git_config_set(key.buf, "true");
+		git_config_set_or_die(key.buf, "true");
 	}
 	strbuf_release(&key);
 
@@ -109,8 +109,8 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
  * to infer the settings for branch.<new_ref>.{remote,merge} from the
  * config.
  */
-static int setup_tracking(const char *new_ref, const char *orig_ref,
-			  enum branch_track track, int quiet)
+static void setup_tracking(const char *new_ref, const char *orig_ref,
+			   enum branch_track track, int quiet)
 {
 	struct tracking tracking;
 	int config_flags = quiet ? 0 : BRANCH_CONFIG_VERBOSE;
@@ -118,7 +118,7 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
 	memset(&tracking, 0, sizeof(tracking));
 	tracking.spec.dst = (char *)orig_ref;
 	if (for_each_remote(find_tracked_branch, &tracking))
-		return 1;
+		return;
 
 	if (!tracking.matches)
 		switch (track) {
@@ -127,18 +127,17 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
 		case BRANCH_TRACK_OVERRIDE:
 			break;
 		default:
-			return 1;
+			return;
 		}
 
 	if (tracking.matches > 1)
-		return error(_("Not tracking: ambiguous information for ref %s"),
-				orig_ref);
+		die(_("Not tracking: ambiguous information for ref %s"),
+		    orig_ref);
 
 	install_branch_config(config_flags, new_ref, tracking.remote,
 			      tracking.src ? tracking.src : orig_ref);
 
 	free(tracking.src);
-	return 0;
 }
 
 int read_branch_desc(struct strbuf *buf, const char *branch_name)
diff --git a/branch.h b/branch.h
index 58aa45f..8ce22f8 100644
--- a/branch.h
+++ b/branch.h
@@ -43,6 +43,7 @@ void remove_branch_state(void);
 /*
  * Configure local branch "local" as downstream to branch "remote"
  * from remote "origin".  Used by git branch --set-upstream.
+ * Dies if unable to install branch config.
  */
 #define BRANCH_CONFIG_VERBOSE 01
 extern void install_branch_config(int flag, const char *local, const char *origin, const char *remote);
diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
index cdaf6f6..dd776b3 100755
--- a/t/t3200-branch.sh
+++ b/t/t3200-branch.sh
@@ -446,6 +446,13 @@ test_expect_success '--set-upstream-to fails on a non-ref' '
 	test_must_fail git branch --set-upstream-to HEAD^{}
 '
 
+test_expect_success '--set-upstream-to fails on locked config' '
+	test_when_finished "rm -f .git/config.lock" &&
+	>.git/config.lock &&
+	git branch locked &&
+	test_must_fail git branch --set-upstream-to locked
+'
+
 test_expect_success 'use --set-upstream-to modify HEAD' '
 	test_config branch.master.remote foo &&
 	test_config branch.master.merge foo &&
@@ -579,7 +586,7 @@ test_expect_success 'avoid ambiguous track' '
 	git config remote.ambi1.fetch refs/heads/lalala:refs/heads/master &&
 	git config remote.ambi2.url lilili &&
 	git config remote.ambi2.fetch refs/heads/lilili:refs/heads/master &&
-	git branch all1 master &&
+	test_must_fail git branch all1 master &&
 	test -z "$(git config branch.all1.merge)"
 '
 
-- 
2.7.0
Junio C Hamano· Feb 2, 2016, 20:49 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 02/15] branch: die on error in setting up tracking branch

Patrick Steinhardt <ps@pks.im> writes:
Show 8 quoted lines
> The setup_tracking function calls install_branch_config, which
> may fail writing the configuration due to a locked configuration
> file or other error conditions. setup_tracking can also fail when
> trying to track ambiguous information for a reference. While this
> condition is checked for and an error code is returned, this
> error is not checked by the caller.
>
> Fix both issues by dying early when error occur.

Hmph. I think create_branch() is written in such a way that all die() come before the actual ref transaction attempts to create the branch, but this change means that we have already created the branch and then die without undoing the damage that is already done.

"The error is not checked by the caller" is very true, but can the caller do something better than just die? I personally do not think it is such a big deal if we just died here, but I may have overlooked something.

Show 111 quoted lines
> Signed-off-by: Patrick Steinhardt <ps@pks.im>
> ---
>  branch.c          | 19 +++++++++----------
>  branch.h          |  1 +
>  t/t3200-branch.sh |  9 ++++++++-
>  3 files changed, 18 insertions(+), 11 deletions(-)
>
> diff --git a/branch.c b/branch.c
> index 7ff3f20..7106369 100644
> --- a/branch.c
> +++ b/branch.c
> @@ -64,16 +64,16 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
>  	}
>  
>  	strbuf_addf(&key, "branch.%s.remote", local);
> -	git_config_set(key.buf, origin ? origin : ".");
> +	git_config_set_or_die(key.buf, origin ? origin : ".");
>  
>  	strbuf_reset(&key);
>  	strbuf_addf(&key, "branch.%s.merge", local);
> -	git_config_set(key.buf, remote);
> +	git_config_set_or_die(key.buf, remote);
>  
>  	if (rebasing) {
>  		strbuf_reset(&key);
>  		strbuf_addf(&key, "branch.%s.rebase", local);
> -		git_config_set(key.buf, "true");
> +		git_config_set_or_die(key.buf, "true");
>  	}
>  	strbuf_release(&key);
>  
> @@ -109,8 +109,8 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
>   * to infer the settings for branch.<new_ref>.{remote,merge} from the
>   * config.
>   */
> -static int setup_tracking(const char *new_ref, const char *orig_ref,
> -			  enum branch_track track, int quiet)
> +static void setup_tracking(const char *new_ref, const char *orig_ref,
> +			   enum branch_track track, int quiet)
>  {
>  	struct tracking tracking;
>  	int config_flags = quiet ? 0 : BRANCH_CONFIG_VERBOSE;
> @@ -118,7 +118,7 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
>  	memset(&tracking, 0, sizeof(tracking));
>  	tracking.spec.dst = (char *)orig_ref;
>  	if (for_each_remote(find_tracked_branch, &tracking))
> -		return 1;
> +		return;
>  
>  	if (!tracking.matches)
>  		switch (track) {
> @@ -127,18 +127,17 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
>  		case BRANCH_TRACK_OVERRIDE:
>  			break;
>  		default:
> -			return 1;
> +			return;
>  		}
>  
>  	if (tracking.matches > 1)
> -		return error(_("Not tracking: ambiguous information for ref %s"),
> -				orig_ref);
> +		die(_("Not tracking: ambiguous information for ref %s"),
> +		    orig_ref);
>  
>  	install_branch_config(config_flags, new_ref, tracking.remote,
>  			      tracking.src ? tracking.src : orig_ref);
>  
>  	free(tracking.src);
> -	return 0;
>  }
>  
>  int read_branch_desc(struct strbuf *buf, const char *branch_name)
> diff --git a/branch.h b/branch.h
> index 58aa45f..8ce22f8 100644
> --- a/branch.h
> +++ b/branch.h
> @@ -43,6 +43,7 @@ void remove_branch_state(void);
>  /*
>   * Configure local branch "local" as downstream to branch "remote"
>   * from remote "origin".  Used by git branch --set-upstream.
> + * Dies if unable to install branch config.
>   */
>  #define BRANCH_CONFIG_VERBOSE 01
>  extern void install_branch_config(int flag, const char *local, const char *origin, const char *remote);
> diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
> index cdaf6f6..dd776b3 100755
> --- a/t/t3200-branch.sh
> +++ b/t/t3200-branch.sh
> @@ -446,6 +446,13 @@ test_expect_success '--set-upstream-to fails on a non-ref' '
>  	test_must_fail git branch --set-upstream-to HEAD^{}
>  '
>  
> +test_expect_success '--set-upstream-to fails on locked config' '
> +	test_when_finished "rm -f .git/config.lock" &&
> +	>.git/config.lock &&
> +	git branch locked &&
> +	test_must_fail git branch --set-upstream-to locked
> +'
> +
>  test_expect_success 'use --set-upstream-to modify HEAD' '
>  	test_config branch.master.remote foo &&
>  	test_config branch.master.merge foo &&
> @@ -579,7 +586,7 @@ test_expect_success 'avoid ambiguous track' '
>  	git config remote.ambi1.fetch refs/heads/lalala:refs/heads/master &&
>  	git config remote.ambi2.url lilili &&
>  	git config remote.ambi2.fetch refs/heads/lilili:refs/heads/master &&
> -	git branch all1 master &&
> +	test_must_fail git branch all1 master &&
>  	test -z "$(git config branch.all1.merge)"
>  '
Patrick Steinhardt· Feb 8, 2016, 13:42 UTC · re: Junio C Hamano · lore

Re: [PATCH v4 02/15] branch: die on error in setting up tracking branch

On Tue, Feb 02, 2016 at 12:49:26PM -0800, Junio C Hamano wrote:
Show 20 quoted lines
> Patrick Steinhardt <ps@pks.im> writes:
> 
> > The setup_tracking function calls install_branch_config, which
> > may fail writing the configuration due to a locked configuration
> > file or other error conditions. setup_tracking can also fail when
> > trying to track ambiguous information for a reference. While this
> > condition is checked for and an error code is returned, this
> > error is not checked by the caller.
> >
> > Fix both issues by dying early when error occur.
> 
> Hmph.  I think create_branch() is written in such a way that all
> die() come before the actual ref transaction attempts to create the
> branch, but this change means that we have already created the
> branch and then die without undoing the damage that is already done.
> 
> "The error is not checked by the caller" is very true, but can the
> caller do something better than just die?  I personally do not think
> it is such a big deal if we just died here, but I may have overlooked
> something.

Well, when dying here we do not record the tracking branch configuration for the newly set up branch. This is the only thing that we are missing as right after setting up the tracking branch we've finished and exit the command.

That being said it's somewhat unfortunate to die here as the user cannot simply try to repeat creating a branch and hope it works this time as the branch has already been created and the command would error out. Maybe we should instead die with an improved error message hinting the user how to fix the issue, something along the lines of

"We were unable to set the remote tracking information for the newly created branch due to <REASON>. After fixing the underlying problem you may set the remote tracking branch by executing `git branch --set-upstream-to=<BRANCH>."

Show 110 quoted lines
> > ---
> >  branch.c          | 19 +++++++++----------
> >  branch.h          |  1 +
> >  t/t3200-branch.sh |  9 ++++++++-
> >  3 files changed, 18 insertions(+), 11 deletions(-)
> >
> > diff --git a/branch.c b/branch.c
> > index 7ff3f20..7106369 100644
> > --- a/branch.c
> > +++ b/branch.c
> > @@ -64,16 +64,16 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
> >  	}
> >  
> >  	strbuf_addf(&key, "branch.%s.remote", local);
> > -	git_config_set(key.buf, origin ? origin : ".");
> > +	git_config_set_or_die(key.buf, origin ? origin : ".");
> >  
> >  	strbuf_reset(&key);
> >  	strbuf_addf(&key, "branch.%s.merge", local);
> > -	git_config_set(key.buf, remote);
> > +	git_config_set_or_die(key.buf, remote);
> >  
> >  	if (rebasing) {
> >  		strbuf_reset(&key);
> >  		strbuf_addf(&key, "branch.%s.rebase", local);
> > -		git_config_set(key.buf, "true");
> > +		git_config_set_or_die(key.buf, "true");
> >  	}
> >  	strbuf_release(&key);
> >  
> > @@ -109,8 +109,8 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
> >   * to infer the settings for branch.<new_ref>.{remote,merge} from the
> >   * config.
> >   */
> > -static int setup_tracking(const char *new_ref, const char *orig_ref,
> > -			  enum branch_track track, int quiet)
> > +static void setup_tracking(const char *new_ref, const char *orig_ref,
> > +			   enum branch_track track, int quiet)
> >  {
> >  	struct tracking tracking;
> >  	int config_flags = quiet ? 0 : BRANCH_CONFIG_VERBOSE;
> > @@ -118,7 +118,7 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
> >  	memset(&tracking, 0, sizeof(tracking));
> >  	tracking.spec.dst = (char *)orig_ref;
> >  	if (for_each_remote(find_tracked_branch, &tracking))
> > -		return 1;
> > +		return;
> >  
> >  	if (!tracking.matches)
> >  		switch (track) {
> > @@ -127,18 +127,17 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
> >  		case BRANCH_TRACK_OVERRIDE:
> >  			break;
> >  		default:
> > -			return 1;
> > +			return;
> >  		}
> >  
> >  	if (tracking.matches > 1)
> > -		return error(_("Not tracking: ambiguous information for ref %s"),
> > -				orig_ref);
> > +		die(_("Not tracking: ambiguous information for ref %s"),
> > +		    orig_ref);
> >  
> >  	install_branch_config(config_flags, new_ref, tracking.remote,
> >  			      tracking.src ? tracking.src : orig_ref);
> >  
> >  	free(tracking.src);
> > -	return 0;
> >  }
> >  
> >  int read_branch_desc(struct strbuf *buf, const char *branch_name)
> > diff --git a/branch.h b/branch.h
> > index 58aa45f..8ce22f8 100644
> > --- a/branch.h
> > +++ b/branch.h
> > @@ -43,6 +43,7 @@ void remove_branch_state(void);
> >  /*
> >   * Configure local branch "local" as downstream to branch "remote"
> >   * from remote "origin".  Used by git branch --set-upstream.
> > + * Dies if unable to install branch config.
> >   */
> >  #define BRANCH_CONFIG_VERBOSE 01
> >  extern void install_branch_config(int flag, const char *local, const char *origin, const char *remote);
> > diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
> > index cdaf6f6..dd776b3 100755
> > --- a/t/t3200-branch.sh
> > +++ b/t/t3200-branch.sh
> > @@ -446,6 +446,13 @@ test_expect_success '--set-upstream-to fails on a non-ref' '
> >  	test_must_fail git branch --set-upstream-to HEAD^{}
> >  '
> >  
> > +test_expect_success '--set-upstream-to fails on locked config' '
> > +	test_when_finished "rm -f .git/config.lock" &&
> > +	>.git/config.lock &&
> > +	git branch locked &&
> > +	test_must_fail git branch --set-upstream-to locked
> > +'
> > +
> >  test_expect_success 'use --set-upstream-to modify HEAD' '
> >  	test_config branch.master.remote foo &&
> >  	test_config branch.master.merge foo &&
> > @@ -579,7 +586,7 @@ test_expect_success 'avoid ambiguous track' '
> >  	git config remote.ambi1.fetch refs/heads/lalala:refs/heads/master &&
> >  	git config remote.ambi2.url lilili &&
> >  	git config remote.ambi2.fetch refs/heads/lilili:refs/heads/master &&
> > -	git branch all1 master &&
> > +	test_must_fail git branch all1 master &&
> >  	test -z "$(git config branch.all1.merge)"
> >  '
Patrick Steinhardt· Feb 8, 2016, 14:03 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 02/15] branch: die on error in setting up tracking branch

On Mon, Feb 08, 2016 at 02:42:32PM +0100, Patrick Steinhardt wrote:
Show 21 quoted lines
> On Tue, Feb 02, 2016 at 12:49:26PM -0800, Junio C Hamano wrote:
> > Patrick Steinhardt <ps@pks.im> writes:
> > 
> > > The setup_tracking function calls install_branch_config, which
> > > may fail writing the configuration due to a locked configuration
> > > file or other error conditions. setup_tracking can also fail when
> > > trying to track ambiguous information for a reference. While this
> > > condition is checked for and an error code is returned, this
> > > error is not checked by the caller.
> > >
> > > Fix both issues by dying early when error occur.
> > 
> > Hmph.  I think create_branch() is written in such a way that all
> > die() come before the actual ref transaction attempts to create the
> > branch, but this change means that we have already created the
> > branch and then die without undoing the damage that is already done.
> > 
> > "The error is not checked by the caller" is very true, but can the
> > caller do something better than just die?  I personally do not think
> > it is such a big deal if we just died here, but I may have overlooked
> > something.

Hum. I've actually forgot about the function not being static. It is actually used in transport.c:transport_push() and builtin/clone.c.

For the clone command I do not regard it as important as on failure the user can simply re-invoke the command and clone a new copy. Sure, this may me inefficient for large repos, but it is still far more sensible than leaving the user with an inconsistent repository.

In transport.c we skip updating local tracking refs when we die. As such, we might leave refs that have been deleted on the remote. I guess those cases are easy to fix when followed up with a fetch or `fetch --prune`.

As said before, if we want to improve the just-die case we might propose how the user may fix up his repository afterwards.

Show 128 quoted lines
> 
> Well, when dying here we do not record the tracking branch
> configuration for the newly set up branch. This is the only thing
> that we are missing as right after setting up the tracking branch
> we've finished and exit the command.
> 
> That being said it's somewhat unfortunate to die here as the user
> cannot simply try to repeat creating a branch and hope it works
> this time as the branch has already been created and the command
> would error out. Maybe we should instead die with an improved
> error message hinting the user how to fix the issue, something
> along the lines of
> 
> "We were unable to set the remote tracking information for the
> newly created branch due to <REASON>. After fixing the underlying
> problem you may set the remote tracking branch by executing `git
> branch --set-upstream-to=<BRANCH>."
> 
> > > ---
> > >  branch.c          | 19 +++++++++----------
> > >  branch.h          |  1 +
> > >  t/t3200-branch.sh |  9 ++++++++-
> > >  3 files changed, 18 insertions(+), 11 deletions(-)
> > >
> > > diff --git a/branch.c b/branch.c
> > > index 7ff3f20..7106369 100644
> > > --- a/branch.c
> > > +++ b/branch.c
> > > @@ -64,16 +64,16 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
> > >  	}
> > >  
> > >  	strbuf_addf(&key, "branch.%s.remote", local);
> > > -	git_config_set(key.buf, origin ? origin : ".");
> > > +	git_config_set_or_die(key.buf, origin ? origin : ".");
> > >  
> > >  	strbuf_reset(&key);
> > >  	strbuf_addf(&key, "branch.%s.merge", local);
> > > -	git_config_set(key.buf, remote);
> > > +	git_config_set_or_die(key.buf, remote);
> > >  
> > >  	if (rebasing) {
> > >  		strbuf_reset(&key);
> > >  		strbuf_addf(&key, "branch.%s.rebase", local);
> > > -		git_config_set(key.buf, "true");
> > > +		git_config_set_or_die(key.buf, "true");
> > >  	}
> > >  	strbuf_release(&key);
> > >  
> > > @@ -109,8 +109,8 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
> > >   * to infer the settings for branch.<new_ref>.{remote,merge} from the
> > >   * config.
> > >   */
> > > -static int setup_tracking(const char *new_ref, const char *orig_ref,
> > > -			  enum branch_track track, int quiet)
> > > +static void setup_tracking(const char *new_ref, const char *orig_ref,
> > > +			   enum branch_track track, int quiet)
> > >  {
> > >  	struct tracking tracking;
> > >  	int config_flags = quiet ? 0 : BRANCH_CONFIG_VERBOSE;
> > > @@ -118,7 +118,7 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
> > >  	memset(&tracking, 0, sizeof(tracking));
> > >  	tracking.spec.dst = (char *)orig_ref;
> > >  	if (for_each_remote(find_tracked_branch, &tracking))
> > > -		return 1;
> > > +		return;
> > >  
> > >  	if (!tracking.matches)
> > >  		switch (track) {
> > > @@ -127,18 +127,17 @@ static int setup_tracking(const char *new_ref, const char *orig_ref,
> > >  		case BRANCH_TRACK_OVERRIDE:
> > >  			break;
> > >  		default:
> > > -			return 1;
> > > +			return;
> > >  		}
> > >  
> > >  	if (tracking.matches > 1)
> > > -		return error(_("Not tracking: ambiguous information for ref %s"),
> > > -				orig_ref);
> > > +		die(_("Not tracking: ambiguous information for ref %s"),
> > > +		    orig_ref);
> > >  
> > >  	install_branch_config(config_flags, new_ref, tracking.remote,
> > >  			      tracking.src ? tracking.src : orig_ref);
> > >  
> > >  	free(tracking.src);
> > > -	return 0;
> > >  }
> > >  
> > >  int read_branch_desc(struct strbuf *buf, const char *branch_name)
> > > diff --git a/branch.h b/branch.h
> > > index 58aa45f..8ce22f8 100644
> > > --- a/branch.h
> > > +++ b/branch.h
> > > @@ -43,6 +43,7 @@ void remove_branch_state(void);
> > >  /*
> > >   * Configure local branch "local" as downstream to branch "remote"
> > >   * from remote "origin".  Used by git branch --set-upstream.
> > > + * Dies if unable to install branch config.
> > >   */
> > >  #define BRANCH_CONFIG_VERBOSE 01
> > >  extern void install_branch_config(int flag, const char *local, const char *origin, const char *remote);
> > > diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
> > > index cdaf6f6..dd776b3 100755
> > > --- a/t/t3200-branch.sh
> > > +++ b/t/t3200-branch.sh
> > > @@ -446,6 +446,13 @@ test_expect_success '--set-upstream-to fails on a non-ref' '
> > >  	test_must_fail git branch --set-upstream-to HEAD^{}
> > >  '
> > >  
> > > +test_expect_success '--set-upstream-to fails on locked config' '
> > > +	test_when_finished "rm -f .git/config.lock" &&
> > > +	>.git/config.lock &&
> > > +	git branch locked &&
> > > +	test_must_fail git branch --set-upstream-to locked
> > > +'
> > > +
> > >  test_expect_success 'use --set-upstream-to modify HEAD' '
> > >  	test_config branch.master.remote foo &&
> > >  	test_config branch.master.merge foo &&
> > > @@ -579,7 +586,7 @@ test_expect_success 'avoid ambiguous track' '
> > >  	git config remote.ambi1.fetch refs/heads/lalala:refs/heads/master &&
> > >  	git config remote.ambi2.url lilili &&
> > >  	git config remote.ambi2.fetch refs/heads/lilili:refs/heads/master &&
> > > -	git branch all1 master &&
> > > +	test_must_fail git branch all1 master &&
> > >  	test -z "$(git config branch.all1.merge)"
> > >  '
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 03/15] branch: die on config error when unsetting upstream

When we try to unset upstream configurations we do not check return codes for the `git_config_set` functions. As those may indicate that we were unable to unset the respective configuration we may exit successfully without any error message while in fact the upstream configuration was not unset.

Fix this by dying with an error message when we cannot unset the configuration.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/branch.c  | 4 ++--
 t/t3200-branch.sh | 7 +++++++
 2 files changed, 9 insertions(+), 2 deletions(-)
Show changes to 2 files +9 −2

builtin/branch.c, t/t3200-branch.sh

diff --git a/builtin/branch.c b/builtin/branch.c
index 3f6c825..0978287 100644
--- a/builtin/branch.c
+++ b/builtin/branch.c
@@ -791,10 +791,10 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
 			die(_("Branch '%s' has no upstream information"), branch->name);
 
 		strbuf_addf(&buf, "branch.%s.remote", branch->name);
-		git_config_set_multivar(buf.buf, NULL, NULL, 1);
+		git_config_set_multivar_or_die(buf.buf, NULL, NULL, 1);
 		strbuf_reset(&buf);
 		strbuf_addf(&buf, "branch.%s.merge", branch->name);
-		git_config_set_multivar(buf.buf, NULL, NULL, 1);
+		git_config_set_multivar_or_die(buf.buf, NULL, NULL, 1);
 		strbuf_release(&buf);
 	} else if (argc > 0 && argc <= 2) {
 		struct branch *branch = branch_get(argv[0]);
diff --git a/t/t3200-branch.sh b/t/t3200-branch.sh
index dd776b3..a897248 100755
--- a/t/t3200-branch.sh
+++ b/t/t3200-branch.sh
@@ -473,6 +473,13 @@ test_expect_success '--unset-upstream should fail if given a non-existent branch
 	test_must_fail git branch --unset-upstream i-dont-exist
 '
 
+test_expect_success '--unset-upstream should fail if config is locked' '
+	test_when_finished "rm -f .git/config.lock" &&
+	git branch --set-upstream-to locked &&
+	>.git/config.lock &&
+	test_must_fail git branch --unset-upstream
+'
+
 test_expect_success 'test --unset-upstream on HEAD' '
 	git branch my14 &&
 	test_config branch.master.remote foo &&
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 04/15] branch: die on config error when editing branch description

---
 builtin/branch.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
Show changes to builtin/branch.c +2 −3
diff --git a/builtin/branch.c b/builtin/branch.c
index 0978287..c043cfc 100644
--- a/builtin/branch.c
+++ b/builtin/branch.c
@@ -570,7 +570,6 @@ static const char edit_description[] = "BRANCH_DESCRIPTION";
 
 static int edit_branch_description(const char *branch_name)
 {
-	int status;
 	struct strbuf buf = STRBUF_INIT;
 	struct strbuf name = STRBUF_INIT;
 
@@ -595,11 +594,11 @@ static int edit_branch_description(const char *branch_name)
 	strbuf_stripspace(&buf, 1);
 
 	strbuf_addf(&name, "branch.%s.description", branch_name);
-	status = git_config_set(name.buf, buf.len ? buf.buf : NULL);
+	git_config_set_or_die(name.buf, buf.len ? buf.buf : NULL);
 	strbuf_release(&name);
 	strbuf_release(&buf);
 
-	return status;
+	return 0;
 }
 
 int cmd_branch(int argc, const char **argv, const char *prefix)
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 05/15] submodule: die on config error when linking modules

When trying to connect a submodule with its corresponding repository in '.git/modules' we try to set the core.worktree setting in the submodule, which may fail due to an error encountered in `git_config_set_in_file`.

The function is used in the git-mv command when trying to move a submodule to another location. We already die when renaming a file fails but do not pay attention to the case where updating the connection between submodule and its repository fails. As this leaves the repository in an inconsistent state, as well, abort the program by dying early and presenting the failure to the user.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 submodule.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
Show changes to submodule.c +3 −5
diff --git a/submodule.c b/submodule.c
index b83939c..589a82c 100644
--- a/submodule.c
+++ b/submodule.c
@@ -1087,11 +1087,9 @@ void connect_work_tree_and_git_dir(const char *work_tree, const char *git_dir)
 	/* Update core.worktree setting */
 	strbuf_reset(&file_name);
 	strbuf_addf(&file_name, "%s/config", git_dir);
-	if (git_config_set_in_file(file_name.buf, "core.worktree",
-				   relative_path(real_work_tree, git_dir,
-						 &rel_path)))
-		die(_("Could not set core.worktree in %s"),
-		    file_name.buf);
+	git_config_set_in_file_or_die(file_name.buf, "core.worktree",
+				      relative_path(real_work_tree, git_dir,
+						    &rel_path));
 
 	strbuf_release(&file_name);
 	strbuf_release(&rel_path);
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 06/15] submodule--helper: die on config error when cloning module

When setting the 'core.worktree' option for a newly cloned submodule we ignore the return value of `git_config_set_in_file`. As this leaves the submodule in an inconsistent state, we instaed we want to inform the user that something has gone wrong by printing an error and aborting the program.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/submodule--helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Show changes to builtin/submodule--helper.c +2 −2
diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c
index f4c3eff..c7e1ea2 100644
--- a/builtin/submodule--helper.c
+++ b/builtin/submodule--helper.c
@@ -245,8 +245,8 @@ static int module_clone(int argc, const char **argv, const char *prefix)
 	p = git_pathdup_submodule(path, "config");
 	if (!p)
 		die(_("could not get submodule directory for '%s'"), path);
-	git_config_set_in_file(p, "core.worktree",
-			       relative_path(sb.buf, sm_gitdir, &rel_path));
+	git_config_set_in_file_or_die(p, "core.worktree",
+				      relative_path(sb.buf, sm_gitdir, &rel_path));
 	strbuf_release(&sb);
 	strbuf_release(&rel_path);
 	free(sm_gitdir);
-- 
2.7.0
Eric Sunshine· Feb 2, 2016, 18:45 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 06/15] submodule--helper: die on config error when cloning module

On Tue, Feb 2, 2016 at 6:51 AM, Patrick Steinhardt <ps@pks.im> wrote:
> When setting the 'core.worktree' option for a newly cloned
> submodule we ignore the return value of `git_config_set_in_file`.
> As this leaves the submodule in an inconsistent state, we instaed
> we want to inform the user that something has gone wrong by
s/instaed/instead/

Also, there are too many "we"s, so dropping one would be a good idea: either "we instead" or "instead we".

> printing an error and aborting the program.
>
> Signed-off-by: Patrick Steinhardt <ps@pks.im>
Patrick Steinhardt· Feb 8, 2016, 14:05 UTC · re: Eric Sunshine · lore

Re: [PATCH v4 06/15] submodule--helper: die on config error when cloning module

On Tue, Feb 02, 2016 at 01:45:50PM -0500, Eric Sunshine wrote:
Show 14 quoted lines
> On Tue, Feb 2, 2016 at 6:51 AM, Patrick Steinhardt <ps@pks.im> wrote:
> > When setting the 'core.worktree' option for a newly cloned
> > submodule we ignore the return value of `git_config_set_in_file`.
> > As this leaves the submodule in an inconsistent state, we instaed
> > we want to inform the user that something has gone wrong by
> 
> s/instaed/instead/
> 
> Also, there are too many "we"s, so dropping one would be a good idea:
> either "we instead" or "instead we".
> 
> > printing an error and aborting the program.
> >
> > Signed-off-by: Patrick Steinhardt <ps@pks.im>
Thanks, fixed now.
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 07/15] remote: die on config error when setting URL

When invoking `git-remote --set-url` we do not check the return value when writing the actual new URL to the configuration file, pretending to the user that the configuration has been set while it was in fact not persisted.

Fix this problem by dying early when setting the config fails.
Signed-off-by: Patrick Steinhardt
---
 builtin/remote.c  | 11 ++++++-----
 t/t5505-remote.sh |  9 +++++++++
 2 files changed, 15 insertions(+), 5 deletions(-)
Show changes to 2 files +15 −5

builtin/remote.c, t/t5505-remote.sh

diff --git a/builtin/remote.c b/builtin/remote.c
index 2b2ff9b..8b78c3d 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -1583,11 +1583,12 @@ static int set_url(int argc, const char **argv)
 	/* Special cases that add new entry. */
 	if ((!oldurl && !delete_mode) || add_mode) {
 		if (add_mode)
-			git_config_set_multivar(name_buf.buf, newurl,
-				"^$", 0);
+			git_config_set_multivar_or_die(name_buf.buf, newurl,
+						       "^$", 0);
 		else
-			git_config_set(name_buf.buf, newurl);
+			git_config_set_or_die(name_buf.buf, newurl);
 		strbuf_release(&name_buf);
+
 		return 0;
 	}
 
@@ -1608,9 +1609,9 @@ static int set_url(int argc, const char **argv)
 	regfree(&old_regex);
 
 	if (!delete_mode)
-		git_config_set_multivar(name_buf.buf, newurl, oldurl, 0);
+		git_config_set_multivar_or_die(name_buf.buf, newurl, oldurl, 0);
 	else
-		git_config_set_multivar(name_buf.buf, NULL, oldurl, 1);
+		git_config_set_multivar_or_die(name_buf.buf, NULL, oldurl, 1);
 	return 0;
 }
 
diff --git a/t/t5505-remote.sh b/t/t5505-remote.sh
index 1a8e3b8..e019f27 100755
--- a/t/t5505-remote.sh
+++ b/t/t5505-remote.sh
@@ -932,6 +932,15 @@ test_expect_success 'get-url on new remote' '
 	echo foo | get_url_test --push --all someremote
 '
 
+test_expect_success 'remote set-url with locked config' '
+	test_when_finished "rm -f .git/config.lock" &&
+	git config --get-all remote.someremote.url >expect &&
+	>.git/config.lock &&
+	test_must_fail git remote set-url someremote baz &&
+	git config --get-all remote.someremote.url >actual &&
+	cmp expect actual
+'
+
 test_expect_success 'remote set-url bar' '
 	git remote set-url someremote bar &&
 	echo bar >expect &&
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 12:00 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 07/15] remote: die on config error when setting URL

On Tue, Feb 02, 2016 at 12:51:48PM +0100, Patrick Steinhardt wrote:
Show 8 quoted lines
> When invoking `git-remote --set-url` we do not check the return
> value when writing the actual new URL to the configuration file,
> pretending to the user that the configuration has been set while
> it was in fact not persisted.
> 
> Fix this problem by dying early when setting the config fails.
> 
> Signed-off-by: Patrick Steinhardt
Signed-off-by: Patrick Steinhardt <ps@pks.im>

Sorry, borked up that signed-off-by. Will fix in a later revision (which I guess will be necessary anyway ;).

Patrick
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 08/15] remote: die on config error when setting/adding branches

When we add or set new branches (e.g. by `git remote add -f` or `git remote set-branches`) we do not check for error codes when writing the branches to the configuration file. When persisting the configuration failed we are left with a remote that has none or not all of the branches that should have been set without notifying the user.

Fix this issue by dying early on configuration error.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/remote.c | 26 +++++++++-----------------
 1 file changed, 9 insertions(+), 17 deletions(-)
Show changes to builtin/remote.c +9 −17
diff --git a/builtin/remote.c b/builtin/remote.c
index 8b78c3d..eeb6d2e 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -108,8 +108,8 @@ enum {
 #define MIRROR_PUSH 2
 #define MIRROR_BOTH (MIRROR_FETCH|MIRROR_PUSH)
 
-static int add_branch(const char *key, const char *branchname,
-		const char *remotename, int mirror, struct strbuf *tmp)
+static void add_branch(const char *key, const char *branchname,
+		       const char *remotename, int mirror, struct strbuf *tmp)
 {
 	strbuf_reset(tmp);
 	strbuf_addch(tmp, '+');
@@ -119,7 +119,7 @@ static int add_branch(const char *key, const char *branchname,
 	else
 		strbuf_addf(tmp, "refs/heads/%s:refs/remotes/%s/%s",
 				branchname, remotename, branchname);
-	return git_config_set_multivar(key, tmp->buf, "^$", 0);
+	git_config_set_multivar_or_die(key, tmp->buf, "^$", 0);
 }
 
 static const char mirror_advice[] =
@@ -206,9 +206,8 @@ static int add(int argc, const char **argv)
 		if (track.nr == 0)
 			string_list_append(&track, "*");
 		for (i = 0; i < track.nr; i++) {
-			if (add_branch(buf.buf, track.items[i].string,
-				       name, mirror, &buf2))
-				return 1;
+			add_branch(buf.buf, track.items[i].string,
+				   name, mirror, &buf2);
 		}
 	}
 
@@ -1416,21 +1415,17 @@ static int remove_all_fetch_refspecs(const char *remote, const char *key)
 	return git_config_set_multivar(key, NULL, NULL, 1);
 }
 
-static int add_branches(struct remote *remote, const char **branches,
-			const char *key)
+static void add_branches(struct remote *remote, const char **branches,
+			 const char *key)
 {
 	const char *remotename = remote->name;
 	int mirror = remote->mirror;
 	struct strbuf refspec = STRBUF_INIT;
 
 	for (; *branches; branches++)
-		if (add_branch(key, *branches, remotename, mirror, &refspec)) {
-			strbuf_release(&refspec);
-			return 1;
-		}
+		add_branch(key, *branches, remotename, mirror, &refspec);
 
 	strbuf_release(&refspec);
-	return 0;
 }
 
 static int set_remote_branches(const char *remotename, const char **branches,
@@ -1449,10 +1444,7 @@ static int set_remote_branches(const char *remotename, const char **branches,
 		strbuf_release(&key);
 		return 1;
 	}
-	if (add_branches(remote, branches, key.buf)) {
-		strbuf_release(&key);
-		return 1;
-	}
+	add_branches(remote, branches, key.buf);
 
 	strbuf_release(&key);
 	return 0;
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 09/15] remote: die on config error when manipulating remotes

When manipulating remotes we try to set various configuration values without checking if the values were persisted correctly, possibly leaving the remote in an inconsistent state.

Fix this issue by dying early and notifying the user about the error.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/remote.c | 39 ++++++++++++---------------------------
 1 file changed, 12 insertions(+), 27 deletions(-)
Show changes to builtin/remote.c +12 −27
diff --git a/builtin/remote.c b/builtin/remote.c
index eeb6d2e..fe57f77 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -197,8 +197,7 @@ static int add(int argc, const char **argv)
 		die(_("'%s' is not a valid remote name"), name);
 
 	strbuf_addf(&buf, "remote.%s.url", name);
-	if (git_config_set(buf.buf, url))
-		return 1;
+	git_config_set_or_die(buf.buf, url);
 
 	if (!mirror || mirror & MIRROR_FETCH) {
 		strbuf_reset(&buf);
@@ -214,16 +213,14 @@ static int add(int argc, const char **argv)
 	if (mirror & MIRROR_PUSH) {
 		strbuf_reset(&buf);
 		strbuf_addf(&buf, "remote.%s.mirror", name);
-		if (git_config_set(buf.buf, "true"))
-			return 1;
+		git_config_set_or_die(buf.buf, "true");
 	}
 
 	if (fetch_tags != TAGS_DEFAULT) {
 		strbuf_reset(&buf);
 		strbuf_addf(&buf, "remote.%s.tagopt", name);
-		if (git_config_set(buf.buf,
-			fetch_tags == TAGS_SET ? "--tags" : "--no-tags"))
-			return 1;
+		git_config_set_or_die(buf.buf,
+				      fetch_tags == TAGS_SET ? "--tags" : "--no-tags");
 	}
 
 	if (fetch && fetch_remote(name))
@@ -591,25 +588,20 @@ static int migrate_file(struct remote *remote)
 
 	strbuf_addf(&buf, "remote.%s.url", remote->name);
 	for (i = 0; i < remote->url_nr; i++)
-		if (git_config_set_multivar(buf.buf, remote->url[i], "^$", 0))
-			return error(_("Could not append '%s' to '%s'"),
-					remote->url[i], buf.buf);
+		git_config_set_multivar_or_die(buf.buf, remote->url[i], "^$", 0);
 	strbuf_reset(&buf);
 	strbuf_addf(&buf, "remote.%s.push", remote->name);
 	for (i = 0; i < remote->push_refspec_nr; i++)
-		if (git_config_set_multivar(buf.buf, remote->push_refspec[i], "^$", 0))
-			return error(_("Could not append '%s' to '%s'"),
-					remote->push_refspec[i], buf.buf);
+		git_config_set_multivar_or_die(buf.buf, remote->push_refspec[i], "^$", 0);
 	strbuf_reset(&buf);
 	strbuf_addf(&buf, "remote.%s.fetch", remote->name);
 	for (i = 0; i < remote->fetch_refspec_nr; i++)
-		if (git_config_set_multivar(buf.buf, remote->fetch_refspec[i], "^$", 0))
-			return error(_("Could not append '%s' to '%s'"),
-					remote->fetch_refspec[i], buf.buf);
+		git_config_set_multivar_or_die(buf.buf, remote->fetch_refspec[i], "^$", 0);
 	if (remote->origin == REMOTE_REMOTES)
 		unlink_or_warn(git_path("remotes/%s", remote->name));
 	else if (remote->origin == REMOTE_BRANCHES)
 		unlink_or_warn(git_path("branches/%s", remote->name));
+
 	return 0;
 }
 
@@ -656,8 +648,7 @@ static int mv(int argc, const char **argv)
 
 	strbuf_reset(&buf);
 	strbuf_addf(&buf, "remote.%s.fetch", rename.new);
-	if (git_config_set_multivar(buf.buf, NULL, NULL, 1))
-		return error(_("Could not remove config section '%s'"), buf.buf);
+	git_config_set_multivar_or_die(buf.buf, NULL, NULL, 1);
 	strbuf_addf(&old_remote_context, ":refs/remotes/%s/", rename.old);
 	for (i = 0; i < oldremote->fetch_refspec_nr; i++) {
 		char *ptr;
@@ -677,8 +668,7 @@ static int mv(int argc, const char **argv)
 				  "\tPlease update the configuration manually if necessary."),
 				buf2.buf);
 
-		if (git_config_set_multivar(buf.buf, buf2.buf, "^$", 0))
-			return error(_("Could not append '%s'"), buf.buf);
+		git_config_set_multivar_or_die(buf.buf, buf2.buf, "^$", 0);
 	}
 
 	read_branches();
@@ -688,9 +678,7 @@ static int mv(int argc, const char **argv)
 		if (info->remote_name && !strcmp(info->remote_name, rename.old)) {
 			strbuf_reset(&buf);
 			strbuf_addf(&buf, "branch.%s.remote", item->string);
-			if (git_config_set(buf.buf, rename.new)) {
-				return error(_("Could not set '%s'"), buf.buf);
-			}
+			git_config_set_or_die(buf.buf, rename.new);
 		}
 	}
 
@@ -788,10 +776,7 @@ static int rm(int argc, const char **argv)
 				strbuf_reset(&buf);
 				strbuf_addf(&buf, "branch.%s.%s",
 						item->string, *k);
-				if (git_config_set(buf.buf, NULL)) {
-					strbuf_release(&buf);
-					return -1;
-				}
+				git_config_set_or_die(buf.buf, NULL);
 			}
 		}
 	}
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 10/15] clone: die on config error in cmd_clone

The clone command does not check for error codes returned by `git_config_set` functions. This may cause the user to end up with an inconsistent repository without any indication with what went wrong.

Fix this problem by dying with an error message when we are unable to write the configuration files to disk.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/clone.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Show changes to builtin/clone.c +4 −4
diff --git a/builtin/clone.c b/builtin/clone.c
index 81e238f..f2a2f9a 100644
--- a/builtin/clone.c
+++ b/builtin/clone.c
@@ -786,12 +786,12 @@ static void write_refspec_config(const char *src_ref_prefix,
 		/* Configure the remote */
 		if (value.len) {
 			strbuf_addf(&key, "remote.%s.fetch", option_origin);
-			git_config_set_multivar(key.buf, value.buf, "^$", 0);
+			git_config_set_multivar_or_die(key.buf, value.buf, "^$", 0);
 			strbuf_reset(&key);
 
 			if (option_mirror) {
 				strbuf_addf(&key, "remote.%s.mirror", option_origin);
-				git_config_set(key.buf, "true");
+				git_config_set_or_die(key.buf, "true");
 				strbuf_reset(&key);
 			}
 		}
@@ -949,14 +949,14 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
 			src_ref_prefix = "refs/";
 		strbuf_addstr(&branch_top, src_ref_prefix);
 
-		git_config_set("core.bare", "true");
+		git_config_set_or_die("core.bare", "true");
 	} else {
 		strbuf_addf(&branch_top, "refs/remotes/%s/", option_origin);
 	}
 
 	strbuf_addf(&value, "+%s*:%s*", src_ref_prefix, branch_top.buf);
 	strbuf_addf(&key, "remote.%s.url", option_origin);
-	git_config_set(key.buf, repo);
+	git_config_set_or_die(key.buf, repo);
 	strbuf_reset(&key);
 
 	if (option_reference.nr)
-- 
2.7.0
Junio C Hamano· Feb 2, 2016, 20:55 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 10/15] clone: die on config error in cmd_clone

Patrick Steinhardt <ps@pks.im> writes:
Show 7 quoted lines
> The clone command does not check for error codes returned by
> `git_config_set` functions. This may cause the user to end up
> with an inconsistent repository without any indication with what
> went wrong.
>
> Fix this problem by dying with an error message when we are
> unable to write the configuration files to disk.

When this happens, the junk_mode is still JUNK_LEAVE_NONE, so upon hitting such an error, we'd remove everything and die. And we haven't wasted the effort for large object transfer yet.

Which all sounds sensible.
Show 41 quoted lines
> Signed-off-by: Patrick Steinhardt <ps@pks.im>
> ---
>  builtin/clone.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/builtin/clone.c b/builtin/clone.c
> index 81e238f..f2a2f9a 100644
> --- a/builtin/clone.c
> +++ b/builtin/clone.c
> @@ -786,12 +786,12 @@ static void write_refspec_config(const char *src_ref_prefix,
>  		/* Configure the remote */
>  		if (value.len) {
>  			strbuf_addf(&key, "remote.%s.fetch", option_origin);
> -			git_config_set_multivar(key.buf, value.buf, "^$", 0);
> +			git_config_set_multivar_or_die(key.buf, value.buf, "^$", 0);
>  			strbuf_reset(&key);
>  
>  			if (option_mirror) {
>  				strbuf_addf(&key, "remote.%s.mirror", option_origin);
> -				git_config_set(key.buf, "true");
> +				git_config_set_or_die(key.buf, "true");
>  				strbuf_reset(&key);
>  			}
>  		}
> @@ -949,14 +949,14 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
>  			src_ref_prefix = "refs/";
>  		strbuf_addstr(&branch_top, src_ref_prefix);
>  
> -		git_config_set("core.bare", "true");
> +		git_config_set_or_die("core.bare", "true");
>  	} else {
>  		strbuf_addf(&branch_top, "refs/remotes/%s/", option_origin);
>  	}
>  
>  	strbuf_addf(&value, "+%s*:%s*", src_ref_prefix, branch_top.buf);
>  	strbuf_addf(&key, "remote.%s.url", option_origin);
> -	git_config_set(key.buf, repo);
> +	git_config_set_or_die(key.buf, repo);
>  	strbuf_reset(&key);
>  
>  	if (option_reference.nr)
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 11/15] init-db: die on config errors when initializing empty repo

When creating an empty repository with `git init-db` we do not check for error codes returned by `git_config_set` functions. This may cause the user to end up with an inconsistent repository without any indication for the user.

Fix this problem by dying early with an error message when we are unable to write the configuration files to disk.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/init-db.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
Show changes to builtin/init-db.c +10 −10
diff --git a/builtin/init-db.c b/builtin/init-db.c
index 07229d6..ef19048 100644
--- a/builtin/init-db.c
+++ b/builtin/init-db.c
@@ -227,7 +227,7 @@ static int create_default_files(const char *template_path)
 	/* This forces creation of new config file */
 	xsnprintf(repo_version_string, sizeof(repo_version_string),
 		  "%d", GIT_REPO_VERSION);
-	git_config_set("core.repositoryformatversion", repo_version_string);
+	git_config_set_or_die("core.repositoryformatversion", repo_version_string);
 
 	/* Check filemode trustability */
 	path = git_path_buf(&buf, "config");
@@ -241,18 +241,18 @@ static int create_default_files(const char *template_path)
 		if (filemode && !reinit && (st1.st_mode & S_IXUSR))
 			filemode = 0;
 	}
-	git_config_set("core.filemode", filemode ? "true" : "false");
+	git_config_set_or_die("core.filemode", filemode ? "true" : "false");
 
 	if (is_bare_repository())
-		git_config_set("core.bare", "true");
+		git_config_set_or_die("core.bare", "true");
 	else {
 		const char *work_tree = get_git_work_tree();
-		git_config_set("core.bare", "false");
+		git_config_set_or_die("core.bare", "false");
 		/* allow template config file to override the default */
 		if (log_all_ref_updates == -1)
-		    git_config_set("core.logallrefupdates", "true");
+			git_config_set_or_die("core.logallrefupdates", "true");
 		if (needs_work_tree_config(get_git_dir(), work_tree))
-			git_config_set("core.worktree", work_tree);
+			git_config_set_or_die("core.worktree", work_tree);
 	}
 
 	if (!reinit) {
@@ -265,12 +265,12 @@ static int create_default_files(const char *template_path)
 		    S_ISLNK(st1.st_mode))
 			unlink(path); /* good */
 		else
-			git_config_set("core.symlinks", "false");
+			git_config_set_or_die("core.symlinks", "false");
 
 		/* Check if the filesystem is case-insensitive */
 		path = git_path_buf(&buf, "CoNfIg");
 		if (!access(path, F_OK))
-			git_config_set("core.ignorecase", "true");
+			git_config_set_or_die("core.ignorecase", "true");
 		probe_utf8_pathname_composition();
 	}
 
@@ -386,8 +386,8 @@ int init_db(const char *template_dir, unsigned int flags)
 			xsnprintf(buf, sizeof(buf), "%d", OLD_PERM_EVERYBODY);
 		else
 			die("BUG: invalid value for shared_repository");
-		git_config_set("core.sharedrepository", buf);
-		git_config_set("receive.denyNonFastforwards", "true");
+		git_config_set_or_die("core.sharedrepository", buf);
+		git_config_set_or_die("receive.denyNonFastforwards", "true");
 	}
 
 	if (!(flags & INIT_DB_QUIET)) {
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 12/15] sequencer: die on config error when saving replay opts

When we start picking a range of revisions we save the replay options that are required to restore state when interrupting and later continuing picking the revisions. However, we do not check the return values of the `git_config_set` functions, which may lead us to store incomplete information. As this may lead us to fail when trying to continue the sequence the error can be fatal.

Fix this by dying immediately when we are unable to write back any replay option.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 sequencer.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
Show changes to sequencer.c +11 −11
diff --git a/sequencer.c b/sequencer.c
index 8048786..3590248 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -933,31 +933,31 @@ static void save_opts(struct replay_opts *opts)
 	const char *opts_file = git_path_opts_file();
 
 	if (opts->no_commit)
-		git_config_set_in_file(opts_file, "options.no-commit", "true");
+		git_config_set_in_file_or_die(opts_file, "options.no-commit", "true");
 	if (opts->edit)
-		git_config_set_in_file(opts_file, "options.edit", "true");
+		git_config_set_in_file_or_die(opts_file, "options.edit", "true");
 	if (opts->signoff)
-		git_config_set_in_file(opts_file, "options.signoff", "true");
+		git_config_set_in_file_or_die(opts_file, "options.signoff", "true");
 	if (opts->record_origin)
-		git_config_set_in_file(opts_file, "options.record-origin", "true");
+		git_config_set_in_file_or_die(opts_file, "options.record-origin", "true");
 	if (opts->allow_ff)
-		git_config_set_in_file(opts_file, "options.allow-ff", "true");
+		git_config_set_in_file_or_die(opts_file, "options.allow-ff", "true");
 	if (opts->mainline) {
 		struct strbuf buf = STRBUF_INIT;
 		strbuf_addf(&buf, "%d", opts->mainline);
-		git_config_set_in_file(opts_file, "options.mainline", buf.buf);
+		git_config_set_in_file_or_die(opts_file, "options.mainline", buf.buf);
 		strbuf_release(&buf);
 	}
 	if (opts->strategy)
-		git_config_set_in_file(opts_file, "options.strategy", opts->strategy);
+		git_config_set_in_file_or_die(opts_file, "options.strategy", opts->strategy);
 	if (opts->gpg_sign)
-		git_config_set_in_file(opts_file, "options.gpg-sign", opts->gpg_sign);
+		git_config_set_in_file_or_die(opts_file, "options.gpg-sign", opts->gpg_sign);
 	if (opts->xopts) {
 		int i;
 		for (i = 0; i < opts->xopts_nr; i++)
-			git_config_set_multivar_in_file(opts_file,
-							"options.strategy-option",
-							opts->xopts[i], "^$", 0);
+			git_config_set_multivar_in_file_or_die(opts_file,
+							       "options.strategy-option",
+							       opts->xopts[i], "^$", 0);
 	}
 }
 
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 13/15] compat: die when unable to set core.precomposeunicode

When calling `git_config_set` to set 'core.precomposeunicode' we ignore the return value of the function, which may indicate that we were unable to write the value back to disk. As the function is only called by init-db we can and should die when an error occurs.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 compat/precompose_utf8.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Show changes to compat/precompose_utf8.c +2 −1
diff --git a/compat/precompose_utf8.c b/compat/precompose_utf8.c
index 079070f..9ff1ebe 100644
--- a/compat/precompose_utf8.c
+++ b/compat/precompose_utf8.c
@@ -50,7 +50,8 @@ void probe_utf8_pathname_composition(void)
 		close(output_fd);
 		git_path_buf(&path, "%s", auml_nfd);
 		precomposed_unicode = access(path.buf, R_OK) ? 0 : 1;
-		git_config_set("core.precomposeunicode", precomposed_unicode ? "true" : "false");
+		git_config_set_or_die("core.precomposeunicode",
+				      precomposed_unicode ? "true" : "false");
 		git_path_buf(&path, "%s", auml_nfc);
 		if (unlink(path.buf))
 			die_errno(_("failed to unlink '%s'"), path.buf);
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 14/15] config: rename git_config_set to git_config_set_gently

The desired default behavior for `git_config_set` is to die whenever an error occurs. Dying is the default for a lot of internal functions when failures occur and is in this case the right thing to do for most callers as otherwise we might run into inconsistent repositories without noticing.

As some code may rely on the actual return values for `git_config_set` we still require the ability to invoke these functions without aborting. Rename the existing `git_config_set` functions to `git_config_set_gently` to keep them available for those callers.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 builtin/clone.c  |  2 +-
 builtin/config.c | 28 ++++++++++++++--------------
 builtin/remote.c |  2 +-
 cache.h          | 10 +++++-----
 config.c         | 29 +++++++++++++++--------------
 submodule.c      |  2 +-
 6 files changed, 37 insertions(+), 36 deletions(-)
Show changes to 6 files +37 −36

builtin/clone.c, builtin/config.c, builtin/remote.c, cache.h, config.c, submodule.c

diff --git a/builtin/clone.c b/builtin/clone.c
index f2a2f9a..dccfab3 100644
--- a/builtin/clone.c
+++ b/builtin/clone.c
@@ -735,7 +735,7 @@ static int checkout(void)
 
 static int write_one_config(const char *key, const char *value, void *data)
 {
-	return git_config_set_multivar(key, value ? value : "true", "^$", 0);
+	return git_config_set_multivar_gently(key, value ? value : "true", "^$", 0);
 }
 
 static void write_config(struct string_list *config)
diff --git a/builtin/config.c b/builtin/config.c
index adc7727..c26d6e7 100644
--- a/builtin/config.c
+++ b/builtin/config.c
@@ -582,7 +582,7 @@ int cmd_config(int argc, const char **argv, const char *prefix)
 		check_write();
 		check_argc(argc, 2, 2);
 		value = normalize_value(argv[0], argv[1]);
-		ret = git_config_set_in_file(given_config_source.file, argv[0], value);
+		ret = git_config_set_in_file_gently(given_config_source.file, argv[0], value);
 		if (ret == CONFIG_NOTHING_SET)
 			error("cannot overwrite multiple values with a single value\n"
 			"       Use a regexp, --add or --replace-all to change %s.", argv[0]);
@@ -592,23 +592,23 @@ int cmd_config(int argc, const char **argv, const char *prefix)
 		check_write();
 		check_argc(argc, 2, 3);
 		value = normalize_value(argv[0], argv[1]);
-		return git_config_set_multivar_in_file(given_config_source.file,
-						       argv[0], value, argv[2], 0);
+		return git_config_set_multivar_in_file_gently(given_config_source.file,
+							      argv[0], value, argv[2], 0);
 	}
 	else if (actions == ACTION_ADD) {
 		check_write();
 		check_argc(argc, 2, 2);
 		value = normalize_value(argv[0], argv[1]);
-		return git_config_set_multivar_in_file(given_config_source.file,
-						       argv[0], value,
-						       CONFIG_REGEX_NONE, 0);
+		return git_config_set_multivar_in_file_gently(given_config_source.file,
+							      argv[0], value,
+							      CONFIG_REGEX_NONE, 0);
 	}
 	else if (actions == ACTION_REPLACE_ALL) {
 		check_write();
 		check_argc(argc, 2, 3);
 		value = normalize_value(argv[0], argv[1]);
-		return git_config_set_multivar_in_file(given_config_source.file,
-						       argv[0], value, argv[2], 1);
+		return git_config_set_multivar_in_file_gently(given_config_source.file,
+							      argv[0], value, argv[2], 1);
 	}
 	else if (actions == ACTION_GET) {
 		check_argc(argc, 1, 2);
@@ -634,17 +634,17 @@ int cmd_config(int argc, const char **argv, const char *prefix)
 		check_write();
 		check_argc(argc, 1, 2);
 		if (argc == 2)
-			return git_config_set_multivar_in_file(given_config_source.file,
-							       argv[0], NULL, argv[1], 0);
+			return git_config_set_multivar_in_file_gently(given_config_source.file,
+								      argv[0], NULL, argv[1], 0);
 		else
-			return git_config_set_in_file(given_config_source.file,
-						      argv[0], NULL);
+			return git_config_set_in_file_gently(given_config_source.file,
+							     argv[0], NULL);
 	}
 	else if (actions == ACTION_UNSET_ALL) {
 		check_write();
 		check_argc(argc, 1, 2);
-		return git_config_set_multivar_in_file(given_config_source.file,
-						       argv[0], NULL, argv[1], 1);
+		return git_config_set_multivar_in_file_gently(given_config_source.file,
+							      argv[0], NULL, argv[1], 1);
 	}
 	else if (actions == ACTION_RENAME_SECTION) {
 		int ret;
diff --git a/builtin/remote.c b/builtin/remote.c
index fe57f77..abd5f67 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -1397,7 +1397,7 @@ static int update(int argc, const char **argv)
 
 static int remove_all_fetch_refspecs(const char *remote, const char *key)
 {
-	return git_config_set_multivar(key, NULL, NULL, 1);
+	return git_config_set_multivar_gently(key, NULL, NULL, 1);
 }
 
 static void add_branches(struct remote *remote, const char **branches,
diff --git a/cache.h b/cache.h
index c1f844d..a97f677 100644
--- a/cache.h
+++ b/cache.h
@@ -1469,7 +1469,7 @@ extern int update_server_info(int);
 /* git_config_parse_key() returns these negated: */
 #define CONFIG_INVALID_KEY 1
 #define CONFIG_NO_SECTION_OR_NAME 2
-/* git_config_set(), git_config_set_multivar() return the above or these: */
+/* git_config_set_gently(), git_config_set_multivar_gently() return the above or these: */
 #define CONFIG_NO_LOCK -1
 #define CONFIG_INVALID_FILE 3
 #define CONFIG_NO_WRITE 4
@@ -1507,15 +1507,15 @@ extern int git_config_bool(const char *, const char *);
 extern int git_config_maybe_bool(const char *, const char *);
 extern int git_config_string(const char **, const char *, const char *);
 extern int git_config_pathname(const char **, const char *, const char *);
-extern int git_config_set_in_file(const char *, const char *, const char *);
+extern int git_config_set_in_file_gently(const char *, const char *, const char *);
 extern void git_config_set_in_file_or_die(const char *, const char *, const char *);
-extern int git_config_set(const char *, const char *);
+extern int git_config_set_gently(const char *, const char *);
 extern void git_config_set_or_die(const char *, const char *);
 extern int git_config_parse_key(const char *, char **, int *);
 extern int git_config_key_is_valid(const char *key);
-extern int git_config_set_multivar(const char *, const char *, const char *, int);
+extern int git_config_set_multivar_gently(const char *, const char *, const char *, int);
 extern void git_config_set_multivar_or_die(const char *, const char *, const char *, int);
-extern int git_config_set_multivar_in_file(const char *, const char *, const char *, const char *, int);
+extern int git_config_set_multivar_in_file_gently(const char *, const char *, const char *, const char *, int);
 extern void git_config_set_multivar_in_file_or_die(const char *, const char *, const char *, const char *, int);
 extern int git_config_rename_section(const char *, const char *);
 extern int git_config_rename_section_in_file(const char *, const char *, const char *);
diff --git a/config.c b/config.c
index 856f7d34..e7f42da 100644
--- a/config.c
+++ b/config.c
@@ -1825,10 +1825,10 @@ contline:
 	return offset;
 }
 
-int git_config_set_in_file(const char *config_filename,
-			const char *key, const char *value)
+int git_config_set_in_file_gently(const char *config_filename,
+				  const char *key, const char *value)
 {
-	return git_config_set_multivar_in_file(config_filename, key, value, NULL, 0);
+	return git_config_set_multivar_in_file_gently(config_filename, key, value, NULL, 0);
 }
 
 void git_config_set_in_file_or_die(const char *config_filename,
@@ -1837,9 +1837,9 @@ void git_config_set_in_file_or_die(const char *config_filename,
 	git_config_set_multivar_in_file_or_die(config_filename, key, value, NULL, 0);
 }
 
-int git_config_set(const char *key, const char *value)
+int git_config_set_gently(const char *key, const char *value)
 {
-	return git_config_set_multivar(key, value, NULL, 0);
+	return git_config_set_multivar_gently(key, value, NULL, 0);
 }
 
 void git_config_set_or_die(const char *key, const char *value)
@@ -1961,9 +1961,10 @@ int git_config_key_is_valid(const char *key)
  * - the config file is removed and the lock file rename()d to it.
  *
  */
-int git_config_set_multivar_in_file(const char *config_filename,
-				const char *key, const char *value,
-				const char *value_regex, int multi_replace)
+int git_config_set_multivar_in_file_gently(const char *config_filename,
+					   const char *key, const char *value,
+					   const char *value_regex,
+					   int multi_replace)
 {
 	int fd = -1, in_fd = -1;
 	int ret;
@@ -2194,16 +2195,16 @@ void git_config_set_multivar_in_file_or_die(const char *config_filename,
 				const char *key, const char *value,
 				const char *value_regex, int multi_replace)
 {
-	if (git_config_set_multivar_in_file(config_filename, key, value,
-					    value_regex, multi_replace) < 0)
+	if (git_config_set_multivar_in_file_gently(config_filename, key, value,
+						   value_regex, multi_replace) < 0)
 		die(_("Could not set '%s' to '%s'"), key, value);
 }
 
-int git_config_set_multivar(const char *key, const char *value,
-			const char *value_regex, int multi_replace)
+int git_config_set_multivar_gently(const char *key, const char *value,
+				   const char *value_regex, int multi_replace)
 {
-	return git_config_set_multivar_in_file(NULL, key, value, value_regex,
-					       multi_replace);
+	return git_config_set_multivar_in_file_gently(NULL, key, value, value_regex,
+						      multi_replace);
 }
 
 void git_config_set_multivar_or_die(const char *key, const char *value,
diff --git a/submodule.c b/submodule.c
index 589a82c..be8b5cc 100644
--- a/submodule.c
+++ b/submodule.c
@@ -69,7 +69,7 @@ int update_path_in_gitmodules(const char *oldpath, const char *newpath)
 	strbuf_addstr(&entry, "submodule.");
 	strbuf_addstr(&entry, submodule->name);
 	strbuf_addstr(&entry, ".path");
-	if (git_config_set_in_file(".gitmodules", entry.buf, newpath) < 0) {
+	if (git_config_set_in_file_gently(".gitmodules", entry.buf, newpath) < 0) {
 		/* Maybe the user already did that, don't error out here */
 		warning(_("Could not update .gitmodules entry %s"), entry.buf);
 		strbuf_release(&entry);
-- 
2.7.0
Patrick Steinhardt· Feb 2, 2016, 11:51 UTC · re: Patrick Steinhardt · lore

[PATCH v4 15/15] config: rename git_config_set_or_die to git_config_set

Rename git_config_set_or_die functions to git_config_set, leading to the new default behavior of dying whenever a configuration error occurs.

By now all callers that shall die on error have been transitioned to the _or_die variants, thus making this patch a simple rename of the functions.

Signed-off-by: Patrick Steinhardt <ps@pks.im>
---
 branch.c                    |  6 +++---
 builtin/branch.c            |  6 +++---
 builtin/clone.c             |  8 ++++----
 builtin/init-db.c           | 20 ++++++++++----------
 builtin/remote.c            | 32 ++++++++++++++++----------------
 builtin/submodule--helper.c |  4 ++--
 cache.h                     |  8 ++++----
 config.c                    | 24 ++++++++++++------------
 sequencer.c                 | 22 +++++++++++-----------
 submodule.c                 |  6 +++---
 10 files changed, 68 insertions(+), 68 deletions(-)
Show changes to 10 files +68 −68

branch.c, builtin/branch.c, builtin/clone.c, builtin/init-db.c, builtin/remote.c, builtin/submodule--helper.c, cache.h, config.c, sequencer.c, submodule.c

diff --git a/branch.c b/branch.c
index 7106369..0c11023 100644
--- a/branch.c
+++ b/branch.c
@@ -64,16 +64,16 @@ void install_branch_config(int flag, const char *local, const char *origin, cons
 	}
 
 	strbuf_addf(&key, "branch.%s.remote", local);
-	git_config_set_or_die(key.buf, origin ? origin : ".");
+	git_config_set(key.buf, origin ? origin : ".");
 
 	strbuf_reset(&key);
 	strbuf_addf(&key, "branch.%s.merge", local);
-	git_config_set_or_die(key.buf, remote);
+	git_config_set(key.buf, remote);
 
 	if (rebasing) {
 		strbuf_reset(&key);
 		strbuf_addf(&key, "branch.%s.rebase", local);
-		git_config_set_or_die(key.buf, "true");
+		git_config_set(key.buf, "true");
 	}
 	strbuf_release(&key);
 
diff --git a/builtin/branch.c b/builtin/branch.c
index c043cfc..7b45b6b 100644
--- a/builtin/branch.c
+++ b/builtin/branch.c
@@ -594,7 +594,7 @@ static int edit_branch_description(const char *branch_name)
 	strbuf_stripspace(&buf, 1);
 
 	strbuf_addf(&name, "branch.%s.description", branch_name);
-	git_config_set_or_die(name.buf, buf.len ? buf.buf : NULL);
+	git_config_set(name.buf, buf.len ? buf.buf : NULL);
 	strbuf_release(&name);
 	strbuf_release(&buf);
 
@@ -790,10 +790,10 @@ int cmd_branch(int argc, const char **argv, const char *prefix)
 			die(_("Branch '%s' has no upstream information"), branch->name);
 
 		strbuf_addf(&buf, "branch.%s.remote", branch->name);
-		git_config_set_multivar_or_die(buf.buf, NULL, NULL, 1);
+		git_config_set_multivar(buf.buf, NULL, NULL, 1);
 		strbuf_reset(&buf);
 		strbuf_addf(&buf, "branch.%s.merge", branch->name);
-		git_config_set_multivar_or_die(buf.buf, NULL, NULL, 1);
+		git_config_set_multivar(buf.buf, NULL, NULL, 1);
 		strbuf_release(&buf);
 	} else if (argc > 0 && argc <= 2) {
 		struct branch *branch = branch_get(argv[0]);
diff --git a/builtin/clone.c b/builtin/clone.c
index dccfab3..ecdd80a 100644
--- a/builtin/clone.c
+++ b/builtin/clone.c
@@ -786,12 +786,12 @@ static void write_refspec_config(const char *src_ref_prefix,
 		/* Configure the remote */
 		if (value.len) {
 			strbuf_addf(&key, "remote.%s.fetch", option_origin);
-			git_config_set_multivar_or_die(key.buf, value.buf, "^$", 0);
+			git_config_set_multivar(key.buf, value.buf, "^$", 0);
 			strbuf_reset(&key);
 
 			if (option_mirror) {
 				strbuf_addf(&key, "remote.%s.mirror", option_origin);
-				git_config_set_or_die(key.buf, "true");
+				git_config_set(key.buf, "true");
 				strbuf_reset(&key);
 			}
 		}
@@ -949,14 +949,14 @@ int cmd_clone(int argc, const char **argv, const char *prefix)
 			src_ref_prefix = "refs/";
 		strbuf_addstr(&branch_top, src_ref_prefix);
 
-		git_config_set_or_die("core.bare", "true");
+		git_config_set("core.bare", "true");
 	} else {
 		strbuf_addf(&branch_top, "refs/remotes/%s/", option_origin);
 	}
 
 	strbuf_addf(&value, "+%s*:%s*", src_ref_prefix, branch_top.buf);
 	strbuf_addf(&key, "remote.%s.url", option_origin);
-	git_config_set_or_die(key.buf, repo);
+	git_config_set(key.buf, repo);
 	strbuf_reset(&key);
 
 	if (option_reference.nr)
diff --git a/builtin/init-db.c b/builtin/init-db.c
index ef19048..6223b7d 100644
--- a/builtin/init-db.c
+++ b/builtin/init-db.c
@@ -227,7 +227,7 @@ static int create_default_files(const char *template_path)
 	/* This forces creation of new config file */
 	xsnprintf(repo_version_string, sizeof(repo_version_string),
 		  "%d", GIT_REPO_VERSION);
-	git_config_set_or_die("core.repositoryformatversion", repo_version_string);
+	git_config_set("core.repositoryformatversion", repo_version_string);
 
 	/* Check filemode trustability */
 	path = git_path_buf(&buf, "config");
@@ -241,18 +241,18 @@ static int create_default_files(const char *template_path)
 		if (filemode && !reinit && (st1.st_mode & S_IXUSR))
 			filemode = 0;
 	}
-	git_config_set_or_die("core.filemode", filemode ? "true" : "false");
+	git_config_set("core.filemode", filemode ? "true" : "false");
 
 	if (is_bare_repository())
-		git_config_set_or_die("core.bare", "true");
+		git_config_set("core.bare", "true");
 	else {
 		const char *work_tree = get_git_work_tree();
-		git_config_set_or_die("core.bare", "false");
+		git_config_set("core.bare", "false");
 		/* allow template config file to override the default */
 		if (log_all_ref_updates == -1)
-			git_config_set_or_die("core.logallrefupdates", "true");
+			git_config_set("core.logallrefupdates", "true");
 		if (needs_work_tree_config(get_git_dir(), work_tree))
-			git_config_set_or_die("core.worktree", work_tree);
+			git_config_set("core.worktree", work_tree);
 	}
 
 	if (!reinit) {
@@ -265,12 +265,12 @@ static int create_default_files(const char *template_path)
 		    S_ISLNK(st1.st_mode))
 			unlink(path); /* good */
 		else
-			git_config_set_or_die("core.symlinks", "false");
+			git_config_set("core.symlinks", "false");
 
 		/* Check if the filesystem is case-insensitive */
 		path = git_path_buf(&buf, "CoNfIg");
 		if (!access(path, F_OK))
-			git_config_set_or_die("core.ignorecase", "true");
+			git_config_set("core.ignorecase", "true");
 		probe_utf8_pathname_composition();
 	}
 
@@ -386,8 +386,8 @@ int init_db(const char *template_dir, unsigned int flags)
 			xsnprintf(buf, sizeof(buf), "%d", OLD_PERM_EVERYBODY);
 		else
 			die("BUG: invalid value for shared_repository");
-		git_config_set_or_die("core.sharedrepository", buf);
-		git_config_set_or_die("receive.denyNonFastforwards", "true");
+		git_config_set("core.sharedrepository", buf);
+		git_config_set("receive.denyNonFastforwards", "true");
 	}
 
 	if (!(flags & INIT_DB_QUIET)) {
diff --git a/builtin/remote.c b/builtin/remote.c
index abd5f67..ecb9b26 100644
--- a/builtin/remote.c
+++ b/builtin/remote.c
@@ -119,7 +119,7 @@ static void add_branch(const char *key, const char *branchname,
 	else
 		strbuf_addf(tmp, "refs/heads/%s:refs/remotes/%s/%s",
 				branchname, remotename, branchname);
-	git_config_set_multivar_or_die(key, tmp->buf, "^$", 0);
+	git_config_set_multivar(key, tmp->buf, "^$", 0);
 }
 
 static const char mirror_advice[] =
@@ -197,7 +197,7 @@ static int add(int argc, const char **argv)
 		die(_("'%s' is not a valid remote name"), name);
 
 	strbuf_addf(&buf, "remote.%s.url", name);
-	git_config_set_or_die(buf.buf, url);
+	git_config_set(buf.buf, url);
 
 	if (!mirror || mirror & MIRROR_FETCH) {
 		strbuf_reset(&buf);
@@ -213,14 +213,14 @@ static int add(int argc, const char **argv)
 	if (mirror & MIRROR_PUSH) {
 		strbuf_reset(&buf);
 		strbuf_addf(&buf, "remote.%s.mirror", name);
-		git_config_set_or_die(buf.buf, "true");
+		git_config_set(buf.buf, "true");
 	}
 
 	if (fetch_tags != TAGS_DEFAULT) {
 		strbuf_reset(&buf);
 		strbuf_addf(&buf, "remote.%s.tagopt", name);
-		git_config_set_or_die(buf.buf,
-				      fetch_tags == TAGS_SET ? "--tags" : "--no-tags");
+		git_config_set(buf.buf,
+			       fetch_tags == TAGS_SET ? "--tags" : "--no-tags");
 	}
 
 	if (fetch && fetch_remote(name))
@@ -588,15 +588,15 @@ static int migrate_file(struct remote *remote)
 
 	strbuf_addf(&buf, "remote.%s.url", remote->name);
 	for (i = 0; i < remote->url_nr; i++)
-		git_config_set_multivar_or_die(buf.buf, remote->url[i], "^$", 0);
+		git_config_set_multivar(buf.buf, remote->url[i], "^$", 0);
 	strbuf_reset(&buf);
 	strbuf_addf(&buf, "remote.%s.push", remote->name);
 	for (i = 0; i < remote->push_refspec_nr; i++)
-		git_config_set_multivar_or_die(buf.buf, remote->push_refspec[i], "^$", 0);
+		git_config_set_multivar(buf.buf, remote->push_refspec[i], "^$", 0);
 	strbuf_reset(&buf);
 	strbuf_addf(&buf, "remote.%s.fetch", remote->name);
 	for (i = 0; i < remote->fetch_refspec_nr; i++)
-		git_config_set_multivar_or_die(buf.buf, remote->fetch_refspec[i], "^$", 0);
+		git_config_set_multivar(buf.buf, remote->fetch_refspec[i], "^$", 0);
 	if (remote->origin == REMOTE_REMOTES)
 		unlink_or_warn(git_path("remotes/%s", remote->name));
 	else if (remote->origin == REMOTE_BRANCHES)
@@ -648,7 +648,7 @@ static int mv(int argc, const char **argv)
 
 	strbuf_reset(&buf);
 	strbuf_addf(&buf, "remote.%s.fetch", rename.new);
-	git_config_set_multivar_or_die(buf.buf, NULL, NULL, 1);
+	git_config_set_multivar(buf.buf, NULL, NULL, 1);
 	strbuf_addf(&old_remote_context, ":refs/remotes/%s/", rename.old);
 	for (i = 0; i < oldremote->fetch_refspec_nr; i++) {
 		char *ptr;
@@ -668,7 +668,7 @@ static int mv(int argc, const char **argv)
 				  "\tPlease update the configuration manually if necessary."),
 				buf2.buf);
 
-		git_config_set_multivar_or_die(buf.buf, buf2.buf, "^$", 0);
+		git_config_set_multivar(buf.buf, buf2.buf, "^$", 0);
 	}
 
 	read_branches();
@@ -678,7 +678,7 @@ static int mv(int argc, const char **argv)
 		if (info->remote_name && !strcmp(info->remote_name, rename.old)) {
 			strbuf_reset(&buf);
 			strbuf_addf(&buf, "branch.%s.remote", item->string);
-			git_config_set_or_die(buf.buf, rename.new);
+			git_config_set(buf.buf, rename.new);
 		}
 	}
 
@@ -776,7 +776,7 @@ static int rm(int argc, const char **argv)
 				strbuf_reset(&buf);
 				strbuf_addf(&buf, "branch.%s.%s",
 						item->string, *k);
-				git_config_set_or_die(buf.buf, NULL);
+				git_config_set(buf.buf, NULL);
 			}
 		}
 	}
@@ -1560,10 +1560,10 @@ static int set_url(int argc, const char **argv)
 	/* Special cases that add new entry. */
 	if ((!oldurl && !delete_mode) || add_mode) {
 		if (add_mode)
-			git_config_set_multivar_or_die(name_buf.buf, newurl,
+			git_config_set_multivar(name_buf.buf, newurl,
 						       "^$", 0);
 		else
-			git_config_set_or_die(name_buf.buf, newurl);
+			git_config_set(name_buf.buf, newurl);
 		strbuf_release(&name_buf);
 
 		return 0;
@@ -1586,9 +1586,9 @@ static int set_url(int argc, const char **argv)
 	regfree(&old_regex);
 
 	if (!delete_mode)
-		git_config_set_multivar_or_die(name_buf.buf, newurl, oldurl, 0);
+		git_config_set_multivar(name_buf.buf, newurl, oldurl, 0);
 	else
-		git_config_set_multivar_or_die(name_buf.buf, NULL, oldurl, 1);
+		git_config_set_multivar(name_buf.buf, NULL, oldurl, 1);
 	return 0;
 }
 
diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c
index c7e1ea2..f4c3eff 100644
--- a/builtin/submodule--helper.c
+++ b/builtin/submodule--helper.c
@@ -245,8 +245,8 @@ static int module_clone(int argc, const char **argv, const char *prefix)
 	p = git_pathdup_submodule(path, "config");
 	if (!p)
 		die(_("could not get submodule directory for '%s'"), path);
-	git_config_set_in_file_or_die(p, "core.worktree",
-				      relative_path(sb.buf, sm_gitdir, &rel_path));
+	git_config_set_in_file(p, "core.worktree",
+			       relative_path(sb.buf, sm_gitdir, &rel_path));
 	strbuf_release(&sb);
 	strbuf_release(&rel_path);
 	free(sm_gitdir);
diff --git a/cache.h b/cache.h
index a97f677..876106a 100644
--- a/cache.h
+++ b/cache.h
@@ -1508,15 +1508,15 @@ extern int git_config_maybe_bool(const char *, const char *);
 extern int git_config_string(const char **, const char *, const char *);
 extern int git_config_pathname(const char **, const char *, const char *);
 extern int git_config_set_in_file_gently(const char *, const char *, const char *);
-extern void git_config_set_in_file_or_die(const char *, const char *, const char *);
+extern void git_config_set_in_file(const char *, const char *, const char *);
 extern int git_config_set_gently(const char *, const char *);
-extern void git_config_set_or_die(const char *, const char *);
+extern void git_config_set(const char *, const char *);
 extern int git_config_parse_key(const char *, char **, int *);
 extern int git_config_key_is_valid(const char *key);
 extern int git_config_set_multivar_gently(const char *, const char *, const char *, int);
-extern void git_config_set_multivar_or_die(const char *, const char *, const char *, int);
+extern void git_config_set_multivar(const char *, const char *, const char *, int);
 extern int git_config_set_multivar_in_file_gently(const char *, const char *, const char *, const char *, int);
-extern void git_config_set_multivar_in_file_or_die(const char *, const char *, const char *, const char *, int);
+extern void git_config_set_multivar_in_file(const char *, const char *, const char *, const char *, int);
 extern int git_config_rename_section(const char *, const char *);
 extern int git_config_rename_section_in_file(const char *, const char *, const char *);
 extern const char *git_etc_gitconfig(void);
diff --git a/config.c b/config.c
index e7f42da..325c3ea 100644
--- a/config.c
+++ b/config.c
@@ -1831,10 +1831,10 @@ int git_config_set_in_file_gently(const char *config_filename,
 	return git_config_set_multivar_in_file_gently(config_filename, key, value, NULL, 0);
 }
 
-void git_config_set_in_file_or_die(const char *config_filename,
-			const char *key, const char *value)
+void git_config_set_in_file(const char *config_filename,
+			    const char *key, const char *value)
 {
-	git_config_set_multivar_in_file_or_die(config_filename, key, value, NULL, 0);
+	git_config_set_multivar_in_file(config_filename, key, value, NULL, 0);
 }
 
 int git_config_set_gently(const char *key, const char *value)
@@ -1842,9 +1842,9 @@ int git_config_set_gently(const char *key, const char *value)
 	return git_config_set_multivar_gently(key, value, NULL, 0);
 }
 
-void git_config_set_or_die(const char *key, const char *value)
+void git_config_set(const char *key, const char *value)
 {
-	git_config_set_multivar_or_die(key, value, NULL, 0);
+	git_config_set_multivar(key, value, NULL, 0);
 }
 
 /*
@@ -2191,9 +2191,9 @@ write_err_out:
 
 }
 
-void git_config_set_multivar_in_file_or_die(const char *config_filename,
-				const char *key, const char *value,
-				const char *value_regex, int multi_replace)
+void git_config_set_multivar_in_file(const char *config_filename,
+				     const char *key, const char *value,
+				     const char *value_regex, int multi_replace)
 {
 	if (git_config_set_multivar_in_file_gently(config_filename, key, value,
 						   value_regex, multi_replace) < 0)
@@ -2207,11 +2207,11 @@ int git_config_set_multivar_gently(const char *key, const char *value,
 						      multi_replace);
 }
 
-void git_config_set_multivar_or_die(const char *key, const char *value,
-			const char *value_regex, int multi_replace)
+void git_config_set_multivar(const char *key, const char *value,
+			     const char *value_regex, int multi_replace)
 {
-	git_config_set_multivar_in_file_or_die(NULL, key, value, value_regex,
-					       multi_replace);
+	git_config_set_multivar_in_file(NULL, key, value, value_regex,
+					multi_replace);
 }
 
 static int section_name_match (const char *buf, const char *name)
diff --git a/sequencer.c b/sequencer.c
index 3590248..8048786 100644
--- a/sequencer.c
+++ b/sequencer.c
@@ -933,31 +933,31 @@ static void save_opts(struct replay_opts *opts)
 	const char *opts_file = git_path_opts_file();
 
 	if (opts->no_commit)
-		git_config_set_in_file_or_die(opts_file, "options.no-commit", "true");
+		git_config_set_in_file(opts_file, "options.no-commit", "true");
 	if (opts->edit)
-		git_config_set_in_file_or_die(opts_file, "options.edit", "true");
+		git_config_set_in_file(opts_file, "options.edit", "true");
 	if (opts->signoff)
-		git_config_set_in_file_or_die(opts_file, "options.signoff", "true");
+		git_config_set_in_file(opts_file, "options.signoff", "true");
 	if (opts->record_origin)
-		git_config_set_in_file_or_die(opts_file, "options.record-origin", "true");
+		git_config_set_in_file(opts_file, "options.record-origin", "true");
 	if (opts->allow_ff)
-		git_config_set_in_file_or_die(opts_file, "options.allow-ff", "true");
+		git_config_set_in_file(opts_file, "options.allow-ff", "true");
 	if (opts->mainline) {
 		struct strbuf buf = STRBUF_INIT;
 		strbuf_addf(&buf, "%d", opts->mainline);
-		git_config_set_in_file_or_die(opts_file, "options.mainline", buf.buf);
+		git_config_set_in_file(opts_file, "options.mainline", buf.buf);
 		strbuf_release(&buf);
 	}
 	if (opts->strategy)
-		git_config_set_in_file_or_die(opts_file, "options.strategy", opts->strategy);
+		git_config_set_in_file(opts_file, "options.strategy", opts->strategy);
 	if (opts->gpg_sign)
-		git_config_set_in_file_or_die(opts_file, "options.gpg-sign", opts->gpg_sign);
+		git_config_set_in_file(opts_file, "options.gpg-sign", opts->gpg_sign);
 	if (opts->xopts) {
 		int i;
 		for (i = 0; i < opts->xopts_nr; i++)
-			git_config_set_multivar_in_file_or_die(opts_file,
-							       "options.strategy-option",
-							       opts->xopts[i], "^$", 0);
+			git_config_set_multivar_in_file(opts_file,
+							"options.strategy-option",
+							opts->xopts[i], "^$", 0);
 	}
 }
 
diff --git a/submodule.c b/submodule.c
index be8b5cc..b3fc6ac 100644
--- a/submodule.c
+++ b/submodule.c
@@ -1087,9 +1087,9 @@ void connect_work_tree_and_git_dir(const char *work_tree, const char *git_dir)
 	/* Update core.worktree setting */
 	strbuf_reset(&file_name);
 	strbuf_addf(&file_name, "%s/config", git_dir);
-	git_config_set_in_file_or_die(file_name.buf, "core.worktree",
-				      relative_path(real_work_tree, git_dir,
-						    &rel_path));
+	git_config_set_in_file(file_name.buf, "core.worktree",
+			       relative_path(real_work_tree, git_dir,
+					     &rel_path));
 
 	strbuf_release(&file_name);
 	strbuf_release(&rel_path);
-- 
2.7.0
Stefan Beller· Feb 2, 2016, 18:52 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 00/15] config: make git_config_set die on failure

On Tue, Feb 2, 2016 at 3:51 AM, Patrick Steinhardt <ps@pks.im> wrote:
>   submodule: die on config error when linking modules
>   submodule--helper: die on config error when cloning module
The code in the submodule related patches looks fine to me.
Junio C Hamano· Feb 2, 2016, 20:58 UTC · re: Patrick Steinhardt · lore

Re: [PATCH v4 00/15] config: make git_config_set die on failure

Patrick Steinhardt <ps@pks.im> writes:
Show 16 quoted lines
> Patrick Steinhardt (15):
>   config: introduce set_or_die wrappers
>   branch: die on error in setting up tracking branch
>   branch: die on config error when unsetting upstream
>   branch: die on config error when editing branch description
>   submodule: die on config error when linking modules
>   submodule--helper: die on config error when cloning module
>   remote: die on config error when setting URL
>   remote: die on config error when setting/adding branches
>   remote: die on config error when manipulating remotes
>   clone: die on config error in cmd_clone
>   init-db: die on config errors when initializing empty repo
>   sequencer: die on config error when saving replay opts
>   compat: die when unable to set core.precomposeunicode
>   config: rename git_config_set to git_config_set_gently
>   config: rename git_config_set_or_die to git_config_set

They mostly looked sensible; I commented on things that I noticed, but I don't think I spotted anything that needs a huge fix.

Thanks.
Patrick Steinhardt· Feb 4, 2016, 08:56 UTC · re: Junio C Hamano · lore

Re: [PATCH v4 00/15] config: make git_config_set die on failure

On Tue, Feb 02, 2016 at 12:58:42PM -0800, Junio C Hamano wrote:
Show 23 quoted lines
> Patrick Steinhardt <ps@pks.im> writes:
> 
> > Patrick Steinhardt (15):
> >   config: introduce set_or_die wrappers
> >   branch: die on error in setting up tracking branch
> >   branch: die on config error when unsetting upstream
> >   branch: die on config error when editing branch description
> >   submodule: die on config error when linking modules
> >   submodule--helper: die on config error when cloning module
> >   remote: die on config error when setting URL
> >   remote: die on config error when setting/adding branches
> >   remote: die on config error when manipulating remotes
> >   clone: die on config error in cmd_clone
> >   init-db: die on config errors when initializing empty repo
> >   sequencer: die on config error when saving replay opts
> >   compat: die when unable to set core.precomposeunicode
> >   config: rename git_config_set to git_config_set_gently
> >   config: rename git_config_set_or_die to git_config_set
> 
> They mostly looked sensible; I commented on things that I noticed,
> but I don't think I spotted anything that needs a huge fix.
> 
> Thanks.
Thanks for the feedback. Will post v5 next week.
Patrick

← back to recent threads