[PATCH v5 00/26] t: test cleanup stemming from experimentally enabling pipefail
- From
Denton Liu <liu.denton@gmail.com>
- Date
- Nov 27, 2019, 19:53 UTC
- Message-ID
- <cover.1574884302.git.liu.denton@gmail.com>
- In-Reply-To
- <cover.1574731022.git.liu.denton@gmail.com>
These patches perform some general test cleanup to modernise the style. They should be relatively uncontroversial. The reason these tests were identified for cleanup was because they failed under `set -o pipefail`.
I've gotten rid of the RFC part that actually enables `set -o pipefail` on supported platforms. As Peff pointed out, there are a lot of opportunities for racy SIGPIPE failures so that part still needs a lot of work to be ironed out.
Those changes shouldn't hold back the first part of the series, however. Let's try to get this test cleanup merged in sooner than later so that any new test cases done by copy-paste will have their changes represented.
Changes since v4:
* Squash in "squash! t7700: consolidate code into test_no_missing_in_packs()"
* Fix typo in "t7700: consolidate code into test_no_missing_in_packs()"
* Use "oid" and "packid" instead of "objoid" and "packoid" in "t7700: make references to SHA-1 generic"
Changes since v3:
* More commit message update
* Clean up "apply-one-time-sed.sh: modernize style" more according to Junio's suggestions
* Clean up the t7700 leftover bits
Changes since v2:
* Update commit messages according to Eric's suggestions
* Add "apply-one-time-sed.sh: modernize style"
Changes since v1:
* Removed the `set -o pipefail` changes
* Addressed Junio and Eric's comments on the first part of the series
Denton Liu (26): lib-bash.sh: move `then` onto its own line apply-one-time-sed.sh: modernize style t0014: remove git command upstream of pipe t0090: stop losing return codes of git commands t3301: stop losing return codes of git commands t3600: use test_line_count() where possible t3600: stop losing return codes of git commands t3600: comment on inducing SIGPIPE in `git rm` t4015: stop losing return codes of git commands t4015: use test_write_lines() t4138: stop losing return codes of git commands t5317: stop losing return codes of git commands t5317: use ! grep to check for no matching lines t5703: simplify one-time-sed generation logic t5703: stop losing return codes of git commands t7501: remove spaces after redirect operators t7501: stop losing return codes of git commands t7700: drop redirections to /dev/null t7700: remove spaces after redirect operators t7700: move keywords onto their own line t7700: s/test -f/test_path_is_file/ t7700: consolidate code into test_no_missing_in_packs() t7700: consolidate code into test_has_duplicate_object() t7700: replace egrep with grep t7700: make references to SHA-1 generic t7700: stop losing return codes of git commands
t/lib-bash.sh | 6 +- t/lib-httpd/apply-one-time-sed.sh | 8 +- t/t0014-alias.sh | 4 +- t/t0090-cache-tree.sh | 5 +- t/t3301-notes.sh | 230 ++++++++++++++++++------- t/t3600-rm.sh | 14 +- t/t4015-diff-whitespace.sh | 123 +++++++------ t/t4138-apply-ws-expansion.sh | 16 +- t/t5317-pack-objects-filter-objects.sh | 34 ++-- t/t5703-upload-pack-ref-in-want.sh | 53 +++--- t/t7501-commit-basic-functionality.sh | 83 +++++---- t/t7700-repack.sh | 172 ++++++++---------- 12 files changed, 425 insertions(+), 323 deletions(-)
Range-diff against v4:
1: d5e769af39 = 1: 9085cc00af lib-bash.sh: move `then` onto its own line
2: 31434dfb4b = 2: 86f625c65e apply-one-time-sed.sh: modernize style
3: e4443a6358 = 3: 3844e00367 t0014: remove git command upstream of pipe
4: 712354f90c = 4: 7d33586b21 t0090: stop losing return codes of git commands
5: adef902872 = 5: df6b3393c4 t3301: stop losing return codes of git commands
6: a79cfe261a = 6: d541a8d4d4 t3600: use test_line_count() where possible
7: bfbb8bde3a = 7: a8aeca6795 t3600: stop losing return codes of git commands
8: 714da9e618 = 8: e3db06578d t3600: comment on inducing SIGPIPE in `git rm`
9: 4d5f40f3b0 = 9: 22ea5d736e t4015: stop losing return codes of git commands
10: 68ed9ba7b6 = 10: a44dd28b4d t4015: use test_write_lines()
11: c1ce767a98 = 11: d512319be0 t4138: stop losing return codes of git commands
12: b5fa2ddb87 = 12: 1e08c2b68b t5317: stop losing return codes of git commands
13: 000126915e = 13: fa238be28b t5317: use ! grep to check for no matching lines
14: e18ab06152 = 14: 291caf9bc1 t5703: simplify one-time-sed generation logic
15: 42b63b4735 = 15: edf7af76ae t5703: stop losing return codes of git commands
16: e816d6e18d = 16: 5eb7117fbe t7501: remove spaces after redirect operators
17: 6147ec6e8f = 17: bad732adc8 t7501: stop losing return codes of git commands
18: 7013c3a3c7 = 18: c50c192429 t7700: drop redirections to /dev/null
19: f421b35adb = 19: 58ae066d12 t7700: remove spaces after redirect operators
20: 7b8d5767fb = 20: 82bf24d06a t7700: move keywords onto their own line
21: dafc8da2d2 = 21: 251de77677 t7700: s/test -f/test_path_is_file/
22: 1e8f239080 ! 22: a99a45cb6f t7700: consolidate code into test_no_missing_in_packs()
@@ Commit message
exactly what grep is built for. Replace this invocation of sed with grep
so that we use the correct tool for the job.
+ Instead of verifying each file of `alt_objects/pack/*.idx` individually
+ in a for-loop, batch them together into one verification step.
+
The original testing construct was O(n^2): it used a grep in a loop to
test whether any objects were missing in the packfile. Rewrite this to
- use sort the files then use `comm -23` so that finding missing lines
- from the original file is done more efficiently.
+ sort the files then use `comm -23` so that finding missing lines from
+ the original file is done more efficiently.
While we're at it, add a space to `commit_and_pack ()` for style.
@@ t/t7700-repack.sh: test_description='git repack works correctly'
+test_no_missing_in_packs () {
+ myidx=$(ls -1 .git/objects/pack/*.idx) &&
+ test_path_is_file "$myidx" &&
-+ for p in alt_objects/pack/*.idx
-+ do
-+ git verify-pack -v $p >packlist || return $?
-+ grep "^[0-9a-f]\{40\}" packlist
-+ done >orig.raw &&
-+ cut -d" " -f1 orig.raw | sort >orig &&
++ git verify-pack -v alt_objects/pack/*.idx >orig.raw &&
++ grep "^[0-9a-f]\{40\}" orig.raw | cut -d" " -f1 | sort >orig &&
+ git verify-pack -v $myidx >dest.raw &&
+ cut -d" " -f1 dest.raw | sort >dest &&
+ comm -23 orig dest >missing &&
23: 4b70b92e1d < -: ---------- squash! t7700: consolidate code into test_no_missing_in_packs()
24: b0e58908d9 = 23: f79240e937 t7700: consolidate code into test_has_duplicate_object()
25: 6bd266035f = 24: 632a62f6e9 t7700: replace egrep with grep
26: 8193fee859 ! 25: bf70cc5a0d t7700: make references to SHA-1 generic
@@ Commit message
t7700: make references to SHA-1 generic
Make the test more hash-agnostic by renaming variables from "sha1" to
- "oid" (case-insensitively). Also, replace the regex, `[0-9a-f]\{40\}`
- with `$OID_REGEX`.
+ some variation of "oid" or "packid". Also, replace the regex,
+ `[0-9a-f]\{40\}` with `$OID_REGEX`.
+
+ A better name for "incrpackid" (incremental pack-id) might have been
+ just "packid". However, later in the test suite, we have other uses of
+ "packid". Although the scopes of these variables don't conflict, a
+ future developer may think that commit_and_pack() and
+ test_has_duplicate_object() are semantically related somehow since they
+ share the same variable name. Give them distinct names so that it's
+ clear these uses are unrelated.
## t/t7700-repack.sh ##
@@ t/t7700-repack.sh: test_description='git repack works correctly'
@@ t/t7700-repack.sh: test_description='git repack works correctly'
test_commit "$@" 1>&2 &&
- SHA1=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) &&
- echo pack-${SHA1}.pack
-+ OID=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) &&
-+ echo pack-${OID}.pack
++ incrpackid=$(git pack-objects --all --unpacked --incremental .git/objects/pack/pack </dev/null) &&
++ echo pack-${incrpackid}.pack
}
test_no_missing_in_packs () {
@@ t/t7700-repack.sh: test_description='git repack works correctly'
}
-# we expect $packsha1 and $objsha1 to be defined
-+# we expect $packoid and $objoid to be defined
++# we expect $packid and $oid to be defined
test_has_duplicate_object () {
want_duplicate_object="$1"
found_duplicate_object=false
@@ t/t7700-repack.sh: test_description='git repack works correctly'
do
idx=$(basename $p)
- test "pack-$packsha1.idx" = "$idx" && continue
-+ test "pack-$packoid.idx" = "$idx" && continue
++ test "pack-$packid.idx" = "$idx" && continue
git verify-pack -v $p >packlist || return $?
- if grep "^$objsha1" packlist
-+ if grep "^$objoid" packlist
++ if grep "^$oid" packlist
then
found_duplicate_object=true
echo "DUPLICATE OBJECT FOUND"
@@ t/t7700-repack.sh: test_expect_success 'objects in packs marked .keep are not re
git pack-objects pack &&
# The second pack will contain the excluded object
- packsha1=$(git rev-list --objects --all | grep file2 |
-+ packoid=$(git rev-list --objects --all | grep file2 |
++ packid=$(git rev-list --objects --all | grep file2 |
git pack-objects pack) &&
- >pack-$packsha1.keep &&
- objsha1=$(git verify-pack -v pack-$packsha1.idx | head -n 1 |
- sed -e "s/^\([0-9a-f]\{40\}\).*/\1/") &&
-+ >pack-$packoid.keep &&
-+ objoid=$(git verify-pack -v pack-$packoid.idx | head -n 1 |
++ >pack-$packid.keep &&
++ oid=$(git verify-pack -v pack-$packid.idx | head -n 1 |
+ sed -e "s/^\($OID_REGEX\).*/\1/") &&
mv pack-* .git/objects/pack/ &&
git repack -A -d -l &&
@@ t/t7700-repack.sh: test_expect_success 'objects in packs marked .keep are not re
test_expect_success 'writing bitmaps via command-line can duplicate .keep objects' '
- # build on $objsha1, $packsha1, and .keep state from previous
-+ # build on $objoid, $packoid, and .keep state from previous
++ # build on $oid, $packid, and .keep state from previous
git repack -Adbl &&
test_has_duplicate_object true
'
test_expect_success 'writing bitmaps via config can duplicate .keep objects' '
- # build on $objsha1, $packsha1, and .keep state from previous
-+ # build on $objoid, $packoid, and .keep state from previous
++ # build on $oid, $packid, and .keep state from previous
git -c repack.writebitmaps=true repack -Adl &&
test_has_duplicate_object true
'
@@ t/t7700-repack.sh: test_expect_success 'loose objects in alternate ODB are not r
echo $(pwd)/alt_objects >.git/objects/info/alternates &&
echo content3 >file3 &&
- objsha1=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) &&
-+ objoid=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) &&
++ oid=$(GIT_OBJECT_DIRECTORY=alt_objects git hash-object -w file3) &&
git add file3 &&
test_tick &&
git commit -m commit_file3 &&
27: 456aeaa506 ! 26: 1f6d9a80ad t7700: stop losing return codes of git commands
@@ t/t7700-repack.sh: test_expect_success 'objects in packs marked .keep are not re
+ git rev-list --objects --all >objs &&
+ grep -v file2 objs | git pack-objects pack &&
# The second pack will contain the excluded object
-- packoid=$(git rev-list --objects --all | grep file2 |
+- packid=$(git rev-list --objects --all | grep file2 |
- git pack-objects pack) &&
-+ packoid=$(grep file2 objs | git pack-objects pack) &&
- >pack-$packoid.keep &&
-- objoid=$(git verify-pack -v pack-$packoid.idx | head -n 1 |
++ packid=$(grep file2 objs | git pack-objects pack) &&
+ >pack-$packid.keep &&
+- oid=$(git verify-pack -v pack-$packid.idx | head -n 1 |
- sed -e "s/^\($OID_REGEX\).*/\1/") &&
-+ git verify-pack -v pack-$packoid.idx >packlist &&
-+ objoid=$(head -n 1 packlist | sed -e "s/^\($OID_REGEX\).*/\1/") &&
++ git verify-pack -v pack-$packid.idx >packlist &&
++ oid=$(head -n 1 packlist | sed -e "s/^\($OID_REGEX\).*/\1/") &&
mv pack-* .git/objects/pack/ &&
git repack -A -d -l &&
git prune-packed &&-- 2.24.0.504.g3cd56eb17d