git/list[1] front-page[2] threads[3] people[4] search[5] about
 

Re: [RFC PATCH] index-pack: optionally allow duplicate objects

From
Taylor Blau <ttaylorr@openai.com>
Date
Jul 28, 2026, 23:29 UTC
Message-ID
<amk7T6N5XhArUQwo@com-79390>
In-Reply-To
<20260728042550.91133-2-friel@openai.com>
On Mon, Jul 27, 2026 at 09:25:32PM -0700, friel@openai.com wrote:
Show 10 quoted lines
> Git's upload-pack normally uses pack-objects to select each reachable
> object once before writing a response. A server can instead construct
> that response by streaming entries from existing packs. When those
> packs overlap, the same object can appear more than once.
>
> Avoiding duplicates requires the producers to coordinate their object
> selection or track object IDs across all input packs. A duplicate can
> also be used as a delta base, so removing it can require buffering and
> rewriting the response. Doing that work at request time gives up the
> memory and latency benefits of streaming existing packs.

Right. An out-of-tree implementation of upload-pack may choose to stitch multiple individual packs together by concatenating them, trading some pack generation time for a pack which may contain duplicate objects.

While this series is primarily motivated by that use-case, I suspect that there are optimizations we could make within Git's implementation of upload-pack that would take advantage of environments where clients are prepared to accept packs that contain duplicate objects.

That's not a goal of this patch, of course, but something to keep in mind as others review this.

Show 28 quoted lines
> Applies on top of tb/pack-with-duplicates.
>
>  Documentation/config/pack.adoc    |  11 ++
>  Documentation/git-index-pack.adoc |  12 ++-
>  builtin/index-pack.c              |  41 ++++++-
>  t/t5308-pack-detect-duplicates.sh | 171 ++++++++++++++++++++++++++++++
>  t/t5309-pack-delta-cycles.sh      |  10 ++
>  5 files changed, 241 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/config/pack.adoc b/Documentation/config/pack.adoc
> index 22384c2d2f..2229878abe 100644
> --- a/Documentation/config/pack.adoc
> +++ b/Documentation/config/pack.adoc
> @@ -39,6 +39,17 @@ is set to "multi", reuse parts of just the bitmapped packfile. This
>  can reduce memory and CPU usage to serve fetches, but might result in
>  sending a slightly larger pack. Defaults to true.
>
> +pack.allowDuplicateObjects::
> +	Allow linkgit:git-index-pack[1] to accept a pack containing
> +	multiple copies of the same object while checking that the pack
> +	is self-contained and connected. For example,
> +	`git clone -c pack.allowDuplicateObjects <repository>` can accept
> +	a pack generated from overlapping existing packs. Object and
> +	connectivity checks are preserved. Explicit `--strict` and
> +	`--verify` continue to reject duplicate objects.
> +	`--no-allow-duplicate-objects` overrides this setting.
> +	Defaults to `false`.
> +
A couple of brief thoughts here:
 - Is "while checking that the pack is self-contained and connected"
   true in all cases? Certainly if we give the option
   '--check-self-contained-any-connected' to 'index-pack'. But if
   a user invokes "git -c pack.allowDuplicateObjects index-pack ...",
   we will not bother to perform the same checks.
 - The "For example [...]" may be unnecessary here. I don't have a
   strong feeling here either way, but it feels somewhat specific to
   'git-clone(1)' so perhaps belongs there instead?
 - "Explicit `--strict` and `--verify` [...]" and the following
   sentence. I think that this means to suggest that `--strict` and
   `--verify` both continue to behave as-is, but setting this
   configuration option allows them to conditionally accept
   otherwise-good packs that happen to contain duplicate objects.
   I wonder if these couple of sentences may be combined like: "When
   `true`, linkgit:git-index-pack[1] will accept otherwise-valid packs
   containing duplicate objects under `--strict` or `--verify`." But
   reading further, I don't think that that's actually what this option
   does. More below.
Show 15 quoted lines
>  pack.island::
>  	An extended regular expression configuring a set of delta
>  	islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1]
> diff --git a/Documentation/git-index-pack.adoc b/Documentation/git-index-pack.adoc
> index 18036953c0..1cb11ff898 100644
> --- a/Documentation/git-index-pack.adoc
> +++ b/Documentation/git-index-pack.adoc
> @@ -11,7 +11,9 @@ SYNOPSIS
>  [verse]
>  'git index-pack' [-v] [-o <index-file>] [--[no-]rev-index] <pack-file>
>  'git index-pack' --stdin [--fix-thin] [--keep] [-v] [-o <index-file>]
> -		  [--[no-]rev-index] [<pack-file>]
> +		  [--[no-]rev-index]
> +		  [--[no-]allow-duplicate-objects]
> +		  [<pack-file>]

Not the fault of this patch, but the synopsis and usage string (`index_pack_usage`) do not agree, hence the 'index-pack' entry in t/t0450/adoc-help-mismatches. So putting this on a new line is OK, but I think it's fine to keep this and "[<pack-file>]" on the same line as "[--[no-]rev-index]" in the pre-image of this patch.

Show 12 quoted lines
>  DESCRIPTION
> @@ -97,6 +99,14 @@ default and "Indexing objects" when `--stdin` is specified.
>  --check-self-contained-and-connected::
>  	Die if the pack contains broken links. For internal use only.
>
> +--allow-duplicate-objects::
> +--no-allow-duplicate-objects::
> +	Allow or reject multiple copies of the same object while checking
> +	that the pack is self-contained and connected. The default is
> +	controlled by `pack.allowDuplicateObjects`. The command-line
> +	option overrides the configuration. `--allow-duplicate-objects`
> +	cannot be combined with `--strict` or `--verify`.

Hmm. This suggests something other than what I gathered when reading the corresponding git-config(1) entry.

Are there cases where we would want want to allow duplicate object,s but retain the other "--strict" behavior of dying when the pack contains broken objects, or links off to objects that we don't have? I would imagine that 'git clone' would want to do just this. I imagine that such a use-case would expect that even if we are cloning from a source that is known to produce packs with duplicate objects we would still want to verify that none of the objects it references are missing, etc.

I think that suggests something more along the lines of having this option opt you out of this specific portion of "--strict"'s behavior, as in "git index-pack --strict --allow-duplicate-objects". I may be missing something here.

Show 9 quoted lines
> @@ -135,6 +135,11 @@ static int nr_threads;
>
>  static int from_stdin;
>  static int strict;
> +static enum {
> +	DUPLICATE_OBJECTS_REJECT = 0,
> +	DUPLICATE_OBJECTS_ALLOW_CONFIG,
> +	DUPLICATE_OBJECTS_ALLOW_OPTION,
> +} allow_duplicate_objects;

I was initially a little surprised to see a new enum value here for what I imagined would be a true/false value. But looking at the diff below, I think that this is to silently ignore a "true" value for the config option 'pack.allowDuplicateObjects' in the presence of "--strict".

So I think that this tri-state is fine in that sense. But I imagine that much of this goes away if we take this option to instead carve out one specific behavior of --strict instead of being incompatible with it entirely.

Show 8 quoted lines
> +	if (write_idx_strict &&
> +	    allow_duplicate_objects == DUPLICATE_OBJECTS_ALLOW_OPTION)
> +		die(_("options '%s' and '%s' cannot be used together"),
> +		    "--allow-duplicate-objects", "--strict");
> +	if (verify &&
> +	    allow_duplicate_objects == DUPLICATE_OBJECTS_ALLOW_OPTION)
> +		die(_("options '%s' and '%s' cannot be used together"),
> +		    "--allow-duplicate-objects", "--verify");

If you end up keeping the existing meaning and need to declare this incompatible with write_idx_strict and verify, there is a helper for this case:

    die_for_incompatible_opt2(allow_duplicate_objects == DUPLICATE_OBJECTS_ALLOW_OPTION,
                              "--allow-duplicate-objects",
                              write_idx_strict, "--strict");
    die_for_incompatible_opt2(allow_duplicate_objects == DUPLICATE_OBJECTS_ALLOW_OPTION,
                              "--allow-duplicate-objects",
                              verify, "--verify");

Alternatively, since writing "allow_duplicate_objects == DUPLICATE_OBJECTS_ALLOW_OPTION" is kind of a mouthful, you could instead write this abomination:

    if (allow_duplicate_objects == DUPLICATE_OBJECTS_ALLOW_OPTION) {
        die_for_incompatible_opt2(1, "--allow-duplicate-objects",
                                  write_idx_strict, "--strict");
        die_for_incompatible_opt2(1, "--allow-duplicate-objects",
                                  verify, "--verify");
    }
;-)
Show 9 quoted lines
> @@ -2055,7 +2090,7 @@ int cmd_index_pack(int argc,
>  		read_idx_option(&opts, index_name);
>  		opts.flags |= WRITE_IDX_VERIFY | WRITE_IDX_STRICT;
>  	}
> -	if (strict)
> +	if (write_idx_strict)
>  		opts.flags |= WRITE_IDX_STRICT;
>
>  	if (HAVE_THREADS && !nr_threads) {

OK. Since we aren't treating this as a carve-out, we don't have any further changes in pack-write.c. Makes sense, though I am curious about your thoughts on whether the alternate interface makes more or less sense.

> diff --git a/t/t5308-pack-detect-duplicates.sh b/t/t5308-pack-detect-duplicates.sh
> index c6273a1aeb..95c81fa7b4 100755
> --- a/t/t5308-pack-detect-duplicates.sh
> +++ b/t/t5308-pack-detect-duplicates.sh

I haven't read the tests carefully (under the assumption that they may change substantively if the meaning of "--allow-duplicate-objects" is altered). But from skimming, I wonder if there is some room to shrink the number of tests.

When working with an agent, I typically ask it to implement the minimal number of tests, along with a prompt that it must demonstrate that those tests still exercise all interesting behavior. Often I will repeat this a number of times until I am similarly convinced.

Thanks, Taylor

Previous: friel@openai.comNext: Junio C Hamano
Message 2 of 8 in “index-pack: optionally allow duplicate objects”
  1. index-pack: optionally allow duplicate objectsfriel@openai.com, Jul 28, 2026
  2. Taylor BlauJul 28, 2026
  3. Junio C HamanoJul 29, 2026
  4. Taylor BlauJul 29, 2026
  5. Junio C HamanoJul 29, 2026
  6. friel@openai.comJul 29, 2026
  7. Taylor BlauJul 29, 2026
  8. Taylor BlauJul 29, 2026

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.