Re: [PATCH 2/2] sparse-checkout: clear tracked sparse dirs
- From
Elijah Newren <newren@gmail.com>
- Date
- Jul 30, 2021, 13:52 UTC
- Message-ID
- <CABPp-BGbRbyCYYS+NcYrC-T4hJf7BCoLE2HsXFM4K51A0wSgcg@mail.gmail.com>
- In-Reply-To
- <9212bbf4e3cab20fe49ab8e6dd4ac0277c4f2805.1627579637.git.gitgitgadget@gmail.com>
On Thu, Jul 29, 2021 at 11:27 AM Derrick Stolee via GitGitGadget <gitgitgadget@gmail.com> wrote:
Show 23 quoted lines
> > From: Derrick Stolee <dstolee@microsoft.com> > > When changing the scope of a sparse-checkout using cone mode, we might > have some tracked directories go out of scope. The current logic removes > the tracked files from within those directories, but leaves the ignored > files within those directories. This is a bit unexpected to users who > have given input to Git saying they don't need those directories > anymore. > > This is something that is new to the cone mode pattern type: the user > has explicitly said "I want these directories and _not_ those > directories." The typical sparse-checkout patterns more generally apply > to "I want files with with these patterns" so it is natural to leave > ignored files as they are. This focus on directories in cone mode > provides us an opportunity to change the behavior. > > Leaving these ignored files in the sparse directories makes it > impossible to gain performance benefits in the sparse index. When we > track into these directories, we need to know if the files are ignored > or not, which might depend on the _tracked_ .gitignore file(s) within > the sparse directory. This depends on the indexed version of the file, > so the sparse directory must be expanded.
Is this the issue I highlighted at https://lore.kernel.org/git/CABPp-BHsiLTtv6AuycRrQ5K6q0=ZTJe0kd7uTUL+UT=nxj66zA@mail.gmail.com/, the paragraph "...I thought the point of add_patterns()..." or is there more or other things involved here?
> By deleting the sparse directories when changing scope (or running 'git > sparse-checkout reapply') we regain these performance benefits as if the > repository was in a clean state.
:-)
However, note that our repository is probably ~25x smaller than yours in terms of number of files, and 'git status' performance really isn't that big of an issue for us. Users complained to us about these directories sticking around simply because they were confused by the directories remaining. (Did sparsify not work? What's all that leftover stuff? Why do they have to deal with it? etc.)
Show 5 quoted lines
> Since these ignored files are frequently build output or helper files > from IDEs, the users should not need the files now that the tracked > files are removed. If the tracked files reappear, then they will have > newer timestamps than the build artifacts, so the artifacts will need to > be regenerated anyway.
This is such a good explanation of why automatically removing these directories was perfectly fine for us to do.
Show 7 quoted lines
> If users depend on ignored files within the sparse directories, then > they have created a bad shape in their repository. Regardless, such > shapes would create risk that changing the behavior for all cone mode > users might be too risky to take on at the moment. Since this data shape > makes it impossible to get performance benefits using the sparse index, > we limit the change to only be enabled when the sparse index is enabled. > Users can opt out of this behavior by disabline the sparse index.
s/disabline/disabling/, otherwise, I fully agree with this paragraph.
Show 5 quoted lines
> Depending on user feedback or real-world use, we might want to consider > expanding the behavior change to all of cone mode. Since we are > currently restricting to the sparse index case, we can use the existence > of sparse directory entries in the index as indicators of which > directories should be removed.
Let's just expand it to all of cone mode.
Show 61 quoted lines
> Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
> ---
> Documentation/git-sparse-checkout.txt | 6 +++
> builtin/sparse-checkout.c | 73 +++++++++++++++++++++++++++
> t/t1091-sparse-checkout-builtin.sh | 42 +++++++++++++++
> 3 files changed, 121 insertions(+)
>
> diff --git a/Documentation/git-sparse-checkout.txt b/Documentation/git-sparse-checkout.txt
> index fdcf43f87cb..c443189f418 100644
> --- a/Documentation/git-sparse-checkout.txt
> +++ b/Documentation/git-sparse-checkout.txt
> @@ -210,6 +210,12 @@ case-insensitive check. This corrects for case mismatched filenames in the
> 'git sparse-checkout set' command to reflect the expected cone in the working
> directory.
>
> +When the sparse index is enabled through the `index.sparse` config option,
> +the cone mode sparse-checkout patterns will also remove ignored files that
> +are not within the sparse-checkout definition. This is important behavior
> +to preserve the performance of the sparse index, but also matches that
> +cone mode patterns care about directories, not files.
> +
>
> SUBMODULES
> ----------
> diff --git a/builtin/sparse-checkout.c b/builtin/sparse-checkout.c
> index a4bdd7c4940..5c03636b6ec 100644
> --- a/builtin/sparse-checkout.c
> +++ b/builtin/sparse-checkout.c
> @@ -15,6 +15,7 @@
> #include "wt-status.h"
> #include "quote.h"
> #include "sparse-index.h"
> +#include "run-command.h"
>
> static const char *empty_base = "";
>
> @@ -100,6 +101,71 @@ static int sparse_checkout_list(int argc, const char **argv)
> return 0;
> }
>
> +static void clean_tracked_sparse_directories(struct repository *r)
> +{
> + int i;
> + struct strbuf path = STRBUF_INIT;
> + size_t pathlen;
> +
> + /*
> + * If we are not using cone mode patterns, then we cannot
> + * delete directories outside of the sparse cone.
> + */
> + if (!r || !r->index || !r->index->sparse_checkout_patterns ||
> + !r->index->sparse_checkout_patterns->use_cone_patterns)
> + return;
> + /*
> + * NEEDSWORK: For now, only use this behavior when index.sparse
> + * is enabled. We may want this behavior enabled whenever using
> + * cone mode patterns.
> + */
> + prepare_repo_settings(r);
> + if (!r->worktree || !r->settings.sparse_index)
> + return;s/may/do/ :-)
Show 6 quoted lines
> + > + /* > + * Since we now depend on the sparse index to enable this > + * behavior, use it to our advantage. This process is more > + * complicated without it. > + */
Ah, the real reason why you limited this change to sparse-index comes out. :-)
Show 13 quoted lines
> + convert_to_sparse(r->index);
> +
> + strbuf_addstr(&path, r->worktree);
> + strbuf_complete(&path, '/');
> + pathlen = path.len;
> +
> + for (i = 0; i < r->index->cache_nr; i++) {
> + struct cache_entry *ce = r->index->cache[i];
> +
> + /*
> + * Is this a sparse directory? If so, then definitely
> + * include it. All contained content is outside of the
> + * patterns."include"? I would have used the word "remove", but it gets confusing because the question is if we want to include it in our list of things to remove or remove it from the working directory.
Show 12 quoted lines
> + */
> + if (S_ISSPARSEDIR(ce->ce_mode) &&
> + repo_file_exists(r, ce->name)) {
> + strbuf_setlen(&path, pathlen);
> + strbuf_addstr(&path, ce->name);
> +
> + /*
> + * Removal is "best effort". If something blocks
> + * the deletion, then continue with a warning.
> + */
> + if (remove_dir_recursively(&path, 0))
> + warning(_("failed to remove directory '%s'"), path.buf);Um, doesn't this delete untracked files that are not ignored as well as the ignored files? If so, was that intentional? I'm fully on board with removing the gitignore'd files, but I'm worried removing other untracked files is dangerous.
My implementation of this concept (in an external tool) was more along the lines of
* Get $LIST_OF_NON_SPARSE_DIRECTORIES by walking `git ls-files -t` output and finding common fully-sparse directories * git clean -fX $LIST_OF_NON_SPARSE_DIRECTORIES
Show 25 quoted lines
> + }
> + }
> +
> + strbuf_release(&path);
> +
> + /*
> + * This is temporary: the sparse-checkout builtin is not
> + * integrated with the sparse-index yet, so we need to keep
> + * it full during the process.
> + */
> + ensure_full_index(r->index);
> +}
> +
> static int update_working_directory(struct pattern_list *pl)
> {
> enum update_sparsity_result result;
> @@ -141,6 +207,8 @@ static int update_working_directory(struct pattern_list *pl)
> else
> rollback_lock_file(&lock_file);
>
> + clean_tracked_sparse_directories(r);
> +
> r->index->sparse_checkout_patterns = NULL;
> return result;
> }(Adding a comment here just to separate the two blocks below.)
Show 21 quoted lines
> @@ -540,8 +608,11 @@ static int modify_pattern_list(int argc, const char **argv, enum modify_type m)
> {
> int result;
> int changed_config = 0;
> + struct pattern_list *old_pl = xcalloc(1, sizeof(*old_pl));
> struct pattern_list *pl = xcalloc(1, sizeof(*pl));
>
> + get_sparse_checkout_patterns(old_pl);
> +
> switch (m) {
> case ADD:
> if (core_sparse_checkout_cone)
> @@ -567,7 +638,9 @@ static int modify_pattern_list(int argc, const char **argv, enum modify_type m)
> set_config(MODE_NO_PATTERNS);
>
> clear_pattern_list(pl);
> + clear_pattern_list(old_pl);
> free(pl);
> + free(old_pl);
> return result;
> }You create an old_pl, populate it with get_sparse_checkout_patterns(), do nothing with it, then clear and free it? I'm confused by the above two blocks.
Show 46 quoted lines
> > diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh > index 38fc8340f5c..43eb314c94a 100755 > --- a/t/t1091-sparse-checkout-builtin.sh > +++ b/t/t1091-sparse-checkout-builtin.sh > @@ -642,4 +642,46 @@ test_expect_success MINGW 'cone mode replaces backslashes with slashes' ' > check_files repo/deep a deeper1 > ' > > +test_expect_success 'cone mode clears ignored subdirectories' ' > + rm repo/.git/info/sparse-checkout && > + > + # NEEDSWORK: --sparse-index is required for now > + git -C repo sparse-checkout init --cone --sparse-index && > + git -C repo sparse-checkout set deep/deeper1 && > + > + cat >repo/.gitignore <<-\EOF && > + obj/ > + *.o > + EOF > + > + git -C repo add .gitignore && > + git -C repo commit -m ".gitignore" && > + > + mkdir -p repo/obj repo/folder1/obj repo/deep/deeper2/obj && > + for file in folder1/obj/a obj/a folder1/file.o folder1.o \ > + deep/deeper2/obj/a deep/deeper2/file.o file.o > + do > + echo ignored >repo/$file || return 1 > + done && > + > + git -C repo status --porcelain=v2 >out && > + test_must_be_empty out && > + > + git -C repo sparse-checkout reapply && > + test_path_is_missing repo/folder1 && > + test_path_is_missing repo/deep/deeper2 && > + test_path_is_dir repo/obj && > + test_path_is_file repo/file.o && > + > + git -C repo status --porcelain=v2 >out && > + test_must_be_empty out && > + > + git -C repo sparse-checkout set deep/deeper2 && > + test_path_is_missing repo/deep/deeper1 && > + test_path_is_dir repo/deep/deeper2 &&
What's the expectation for repo/obj?
Show 7 quoted lines
> + > + git -C repo status --porcelain=v2 >out && > + test_must_be_empty out > +' > + > test_done > --