[PATCH v2] doc: fix typos via codespell
- From
Andrew Kreimer <algonell@gmail.com>
- Date
- May 31, 2026, 18:43 UTC
- Message-ID
- <20260531184428.55905-1-algonell@gmail.com>
- In-Reply-To
- <20260506101631.18127-1-algonell@gmail.com>
There are some typos in the documentation, comments, etc. Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com> --- v2: - Drop typos under po/ and git-gui/ (different projects).
Documentation/SubmittingPatches | 2 +- Documentation/git-sparse-checkout.adoc | 2 +- Documentation/technical/build-systems.adoc | 6 +++--- builtin/pack-objects.c | 2 +- commit-graph.h | 2 +- compat/precompose_utf8.c | 2 +- hook.h | 2 +- meson_options.txt | 2 +- midx-write.c | 2 +- odb/source.h | 2 +- packfile.h | 2 +- path.h | 2 +- reftable/system.h | 2 +- t/README | 2 +- t/chainlint.pl | 2 +- t/chainlint/chain-break-false.expect | 2 +- t/chainlint/chain-break-false.test | 2 +- t/t1700-split-index.sh | 2 +- t/t3909-stash-pathspec-file.sh | 6 +++--- t/t4052-stat-output.sh | 2 +- t/t4067-diff-partial-clone.sh | 2 +- t/t9150/svk-merge.dump | 10 +++++----- t/t9151/svn-mergeinfo.dump | 18 +++++++++--------- t/unit-tests/clar/README.md | 2 +- 24 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index d570184ec8..35b4952c8a 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -92,7 +92,7 @@ input and avoids unnecessary churn from many rapid iterations. topic are appropriate, so such an incremental updates are limited to small corrections and polishing. After a topic cooks for some time (like 7 calendar days) in 'next' without needing further tweaks on - top, it gets merged to the 'master' branch and wait to become part + top, it gets merged to the 'master' branch and waits to become part of the next major release. In the following sections, many techniques and conventions are listed diff --git a/Documentation/git-sparse-checkout.adoc b/Documentation/git-sparse-checkout.adoc index 0d1618f161..e286584c67 100644 --- a/Documentation/git-sparse-checkout.adoc +++ b/Documentation/git-sparse-checkout.adoc @@ -134,7 +134,7 @@ the `clean.requireForce` config option is set to `false`. + The `--dry-run` option will list the directories that would be removed without deleting them. Running in this mode can be helpful to predict the -behavior of the clean comand or to determine which kinds of files are left +behavior of the clean command or to determine which kinds of files are left in the sparse directories. + The `--verbose` option will list every file within the directories that diff --git a/Documentation/technical/build-systems.adoc b/Documentation/technical/build-systems.adoc index 3c5237b9fd..ca5b5d96f1 100644 --- a/Documentation/technical/build-systems.adoc +++ b/Documentation/technical/build-systems.adoc @@ -47,7 +47,7 @@ Auto-detection of the following items is considered to be important: - Check for the existence of headers. - Check for the existence of libraries. - - Check for the existence of exectuables. + - Check for the existence of executables. - Check for the runtime behavior of specific functions. - Check for specific link order requirements when multiple libraries are involved. @@ -106,7 +106,7 @@ by the build system: - C: the primary compiled language used by Git, must be supported. Relevant toolchains are GCC, Clang and MSVC. - - Rust: candidate as a second compiled lanugage, should be supported. Relevant + - Rust: candidate as a second compiled language, should be supported. Relevant toolchains is the LLVM-based rustc. Built-in support for the respective languages is preferred over support that @@ -142,7 +142,7 @@ The following list of build systems are considered: === GNU Make -- Platform support: ubitquitous on all platforms, but not well-integrated into Windows. +- Platform support: ubiquitous on all platforms, but not well-integrated into Windows. - Auto-detection: no built-in support for auto-detection of features. - Ease of use: easy to use, but discovering available options is hard. Makefile rules can quickly get out of hand once reaching a certain scope. diff --git a/builtin/pack-objects.c b/builtin/pack-objects.c index 480cc0bd8c..558cf821fe 100644 --- a/builtin/pack-objects.c +++ b/builtin/pack-objects.c @@ -1349,7 +1349,7 @@ static void write_pack_file(void) * length of them as buffer length. * * Note that we need to subtract one though to - * accomodate for the sideband byte. + * accommodate for the sideband byte. */ struct hashfd_options opts = { .progress = progress_state, diff --git a/commit-graph.h b/commit-graph.h index f6a5433641..13ca4ff010 100644 --- a/commit-graph.h +++ b/commit-graph.h @@ -18,7 +18,7 @@ * This method is only used to enhance coverage of the commit-graph * feature in the test suite with the GIT_TEST_COMMIT_GRAPH and * GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS environment variables. Do not - * call this method oustide of a builtin, and only if you know what + * call this method outside of a builtin, and only if you know what * you are doing! */ void git_test_write_commit_graph_or_die(struct odb_source *source); diff --git a/compat/precompose_utf8.c b/compat/precompose_utf8.c index 43b3be0114..6e709bd138 100644 --- a/compat/precompose_utf8.c +++ b/compat/precompose_utf8.c @@ -85,7 +85,7 @@ const char *precompose_string_if_needed(const char *in) out = reencode_string_iconv(in, inlen, ic_prec, 0, &outlen); if (out) { if (outlen == inlen && !memcmp(in, out, outlen)) - free(out); /* no need to return indentical */ + free(out); /* no need to return identical */ else in = out; } diff --git a/hook.h b/hook.h index b4372b636f..27bb1aeb2e 100644 --- a/hook.h +++ b/hook.h @@ -128,7 +128,7 @@ struct run_hooks_opt { * While the callback allows piecemeal writing, it can also be * used for smaller inputs, where it gets called only once. * - * Add hook callback initalization context to `feed_pipe_ctx`. + * Add hook callback initialization context to `feed_pipe_ctx`. * Add hook callback internal state to `feed_pipe_cb_data`. * */ diff --git a/meson_options.txt b/meson_options.txt index 80a8025f20..d936ada098 100644 --- a/meson_options.txt +++ b/meson_options.txt @@ -106,7 +106,7 @@ option('highlight_bin', type: 'string', value: 'highlight') # Documentation. option('docs', type: 'array', choices: ['man', 'html'], value: [], - description: 'Which documenattion formats to build and install.') + description: 'Which documentation formats to build and install.') option('default_help_format', type: 'combo', choices: ['man', 'html', 'platform'], value: 'platform', description: 'Default format used when executing git-help(1).') option('docs_backend', type: 'combo', choices: ['asciidoc', 'asciidoctor', 'auto'], value: 'auto', diff --git a/midx-write.c b/midx-write.c index 561e9eedc0..19e1cd10b7 100644 --- a/midx-write.c +++ b/midx-write.c @@ -1461,7 +1461,7 @@ static int write_midx_internal(struct write_midx_opts *opts) /* * Attempt opening the pack index to populate num_objects. - * Ignore failiures as they can be expected and are not + * Ignore failures as they can be expected and are not * fatal during this selection time. */ open_pack_index(oldest); diff --git a/odb/source.h b/odb/source.h index 0a440884e4..2f51fcb9ff 100644 --- a/odb/source.h +++ b/odb/source.h @@ -341,7 +341,7 @@ static inline int odb_source_read_object_stream(struct odb_read_stream **out, * are only iterated over once. * * The optional `request` structure serves as a template for retrieving the - * object info for each indvidual iterated object and will be populated as if + * object info for each individual iterated object and will be populated as if * `odb_source_read_object_info()` was called on the object. It will not be * modified, the callback will instead be invoked with a separate `struct * object_info` for every object. Object info will not be read when passing a diff --git a/packfile.h b/packfile.h index 49d6bdecf6..5729a37018 100644 --- a/packfile.h +++ b/packfile.h @@ -124,7 +124,7 @@ struct packfile_store { * that packs that contain a lot of accessed objects will be located * towards the front. * - * This is usually desireable, but there are exceptions. One exception + * This is usually desirable, but there are exceptions. One exception * is when the looking up multiple objects in a loop for each packfile. * In that case, we may easily end up with an infinite loop as the * packfiles get reordered to the front repeatedly. diff --git a/path.h b/path.h index 0434ba5e07..4c2958a903 100644 --- a/path.h +++ b/path.h @@ -217,7 +217,7 @@ void safe_create_dir(struct repository *repo, const char *dir, int share); * * - It always adjusts shared permissions. * - * Returns a negative erorr code on error, 0 on success. + * Returns a negative error code on error, 0 on success. */ int safe_create_dir_in_gitdir(struct repository *repo, const char *path); diff --git a/reftable/system.h b/reftable/system.h index c0e2cbe0ff..628232a46f 100644 --- a/reftable/system.h +++ b/reftable/system.h @@ -84,7 +84,7 @@ struct reftable_flock { * to acquire the lock. If `timeout_ms` is 0 we don't wait, if it is negative * we block indefinitely. * - * Retrun 0 on success, a reftable error code on error. Specifically, + * Return 0 on success, a reftable error code on error. Specifically, * `REFTABLE_LOCK_ERROR` should be returned in case the target path is already * locked. */ diff --git a/t/README b/t/README index adbbd9acf4..085921be4b 100644 --- a/t/README +++ b/t/README @@ -972,7 +972,7 @@ see test-lib-functions.sh for the full list and their options. - test_lazy_prereq <prereq> <script> Declare the way to determine if a test prerequisite <prereq> is - satisified or not, but delay the actual determination until the + satisfied or not, but delay the actual determination until the prerequisite is actually used by "test_have_prereq" or the three-arg form of the test_expect_* functions. For example, this is how the SYMLINKS prerequisite is declared to see if the platform diff --git a/t/chainlint.pl b/t/chainlint.pl index f0598e3934..2d07a99700 100755 --- a/t/chainlint.pl +++ b/t/chainlint.pl @@ -35,7 +35,7 @@ # # In other languages, `1+2` would typically be scanned as three tokens # (`1`, `+`, and `2`), but in shell it is a single token. However, the similar -# `1 + 2`, which embeds whitepace, is scanned as three token in shell, as well. +# `1 + 2`, which embeds whitespace, is scanned as three token in shell, as well. # In shell, several characters with special meaning lose that meaning when not # surrounded by whitespace. For instance, the negation operator `!` is special # when standing alone surrounded by whitespace; whereas in `foo!uucp` it is diff --git a/t/chainlint/chain-break-false.expect b/t/chainlint/chain-break-false.expect index f6a0a301e9..db6f8b12a4 100644 --- a/t/chainlint/chain-break-false.expect +++ b/t/chainlint/chain-break-false.expect @@ -1,4 +1,4 @@ -2 if condition not satisified +2 if condition not satisfied 3 then 4 echo it did not work... 5 echo failed! diff --git a/t/chainlint/chain-break-false.test b/t/chainlint/chain-break-false.test index f78ad911fc..924c9627c0 100644 --- a/t/chainlint/chain-break-false.test +++ b/t/chainlint/chain-break-false.test @@ -1,6 +1,6 @@ test_expect_success 'chain-break-false' ' # LINT: broken &&-chain okay if explicit "false" signals failure -if condition not satisified +if condition not satisfied then echo it did not work... echo failed! diff --git a/t/t1700-split-index.sh b/t/t1700-split-index.sh index ac4a5b2734..869fb4a14e 100755 --- a/t/t1700-split-index.sh +++ b/t/t1700-split-index.sh @@ -502,7 +502,7 @@ test_expect_success 'do not refresh null base index' ' git checkout main && git update-index --split-index && test_commit more && - # must not write a new shareindex, or we wont catch the problem + # must not write a new shareindex, or we won't catch the problem git -c splitIndex.maxPercentChange=100 merge --no-edit side-branch 2>err && # i.e. do not expect warnings like # could not freshen shared index .../shareindex.00000... diff --git a/t/t3909-stash-pathspec-file.sh b/t/t3909-stash-pathspec-file.sh index 73f2dbdeb0..3afa6bff3d 100755 --- a/t/t3909-stash-pathspec-file.sh +++ b/t/t3909-stash-pathspec-file.sh @@ -29,7 +29,7 @@ verify_expect () { test_expect_success 'simplest' ' restore_checkpoint && - # More files are written to make sure that git didnt ignore + # More files are written to make sure that git didn't ignore # --pathspec-from-file, stashing everything echo A >fileA.t && echo B >fileB.t && @@ -47,7 +47,7 @@ test_expect_success 'simplest' ' test_expect_success '--pathspec-file-nul' ' restore_checkpoint && - # More files are written to make sure that git didnt ignore + # More files are written to make sure that git didn't ignore # --pathspec-from-file, stashing everything echo A >fileA.t && echo B >fileB.t && @@ -66,7 +66,7 @@ test_expect_success '--pathspec-file-nul' ' test_expect_success 'only touches what was listed' ' restore_checkpoint && - # More files are written to make sure that git didnt ignore + # More files are written to make sure that git didn't ignore # --pathspec-from-file, stashing everything echo A >fileA.t && echo B >fileB.t && diff --git a/t/t4052-stat-output.sh b/t/t4052-stat-output.sh index e009585925..62d3d2604c 100755 --- a/t/t4052-stat-output.sh +++ b/t/t4052-stat-output.sh @@ -420,7 +420,7 @@ test_expect_success 'merge --stat respects COLUMNS with long name' ' # enough terminal display width, will contain the following line: # "<RED>|<RESET> ${FILENAME} | 0" # where "<RED>" and "<RESET>" are ANSI escape codes to color the text. -# To calculate the minimium terminal display width MIN_TERM_WIDTH so that the +# To calculate the minimum terminal display width MIN_TERM_WIDTH so that the # FILENAME in the diffstat will not be shortened, we take the FILENAME length # and add 9 to it. # To check if the diffstat width, when the line_prefix (the "<RED>|<RESET>" of diff --git a/t/t4067-diff-partial-clone.sh b/t/t4067-diff-partial-clone.sh index 30813109ac..a9dec84c30 100755 --- a/t/t4067-diff-partial-clone.sh +++ b/t/t4067-diff-partial-clone.sh @@ -159,7 +159,7 @@ test_expect_success 'diff succeeds even if prefetch triggered by break-rewrites' # We need baz to trigger break-rewrites detection. git -C client reset --hard HEAD && - # break-rewrites detction in reset. + # break-rewrites detection in reset. git -C client reset HEAD~1 ' diff --git a/t/t9150/svk-merge.dump b/t/t9150/svk-merge.dump index 42f70dbec7..6a8ac81b11 100644 --- a/t/t9150/svk-merge.dump +++ b/t/t9150/svk-merge.dump @@ -77,7 +77,7 @@ Content-length: 2411 PROPS-END # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -206,7 +206,7 @@ Content-length: 2465 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -310,7 +310,7 @@ Content-length: 2521 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -417,7 +417,7 @@ Content-length: 2593 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -534,7 +534,7 @@ Content-length: 2713 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will diff --git a/t/t9151/svn-mergeinfo.dump b/t/t9151/svn-mergeinfo.dump index 47cafcf528..d5e1695637 100644 --- a/t/t9151/svn-mergeinfo.dump +++ b/t/t9151/svn-mergeinfo.dump @@ -87,7 +87,7 @@ Content-length: 2411 PROPS-END # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -260,7 +260,7 @@ Content-length: 2465 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -365,7 +365,7 @@ Content-length: 2521 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -473,7 +473,7 @@ Content-length: 2529 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -578,7 +578,7 @@ Content-length: 2593 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -767,7 +767,7 @@ Content-length: 2593 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -948,7 +948,7 @@ Content-length: 2713 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -1172,7 +1172,7 @@ Content-length: 2713 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will @@ -1414,7 +1414,7 @@ Content-length: 2713 # -DCOLLISION_CHECK if you believe that SHA1's # 1461501637330902918203684832716283019655932542976 hashes do not give you -# enough guarantees about no collisions between objects ever hapenning. +# enough guarantees about no collisions between objects ever happening. # # -DNSEC if you want git to care about sub-second file mtimes and ctimes. # Note that you need some new glibc (at least >2.2.4) for this, and it will diff --git a/t/unit-tests/clar/README.md b/t/unit-tests/clar/README.md index 41595989ca..a45b9c8e5d 100644 --- a/t/unit-tests/clar/README.md +++ b/t/unit-tests/clar/README.md @@ -138,7 +138,7 @@ raise errors during test execution. __Caution:__ If you use assertions inside of `test_suitename__initialize`, make sure that you do not rely on `__initialize` being completely run inside your `test_suitename__cleanup` function. Otherwise you might -encounter ressource cleanup twice. +encounter resource cleanup twice. ## How does Clar work? Interdiff against v1: diff --git a/git-gui/git-gui.sh b/git-gui/git-gui.sh index 40e95bccb4..23fe76e498 100755 --- a/git-gui/git-gui.sh +++ b/git-gui/git-gui.sh @@ -109,7 +109,7 @@ foreach p [split $env(PATH) $_path_sep] { if {[file pathtype $p] ne {absolute}} { continue } - # Keep only the first occurrence of any duplicates. + # Keep only the first occurence of any duplicates. set norm_p [file normalize $p] dict set _path_seen $norm_p 1 } diff --git a/git-gui/lib/choose_repository.tcl b/git-gui/lib/choose_repository.tcl index a4703af028..7e1462a20c 100644 --- a/git-gui/lib/choose_repository.tcl +++ b/git-gui/lib/choose_repository.tcl @@ -15,7 +15,7 @@ field w_recentlist ; # Listbox containing recent repositories field w_localpath ; # Entry widget bound to local_path field done 0 ; # Finished picking the repository? -field clone_ok false ; # clone succeeded +field clone_ok false ; # clone succeeeded field local_path {} ; # Where this repository is locally field origin_url {} ; # Where we are cloning from field origin_name origin ; # What we shall call 'origin' diff --git a/git-gui/lib/themed.tcl b/git-gui/lib/themed.tcl index f4cffeac66..c18e201d85 100644 --- a/git-gui/lib/themed.tcl +++ b/git-gui/lib/themed.tcl @@ -4,7 +4,7 @@ namespace eval color { # Variable colors - # Preferred way to set widget colors is using add_option. + # Preffered way to set widget colors is using add_option. # In some cases, like with tags in_diff/in_sel, we use these colors. variable select_bg lightgray variable select_fg black diff --git a/po/el.po b/po/el.po index c45560c996..703f46d0c7 100644 --- a/po/el.po +++ b/po/el.po @@ -2748,7 +2748,7 @@ msgid "Low-level Commands / Interrogators" msgstr "Εντολές Χαμηλού Επιπέδου / Ερωτημάτων" #: help.c:37 -msgid "Low-level Commands / Syncing Repositories" +msgid "Low-level Commands / Synching Repositories" msgstr "Εντολές Χαμηλού Επιπέδου / Συγχρονισμού Αποθετηρίων" #: help.c:38 diff --git a/po/ko.po b/po/ko.po index 6bc20a43e3..7a6847f023 100644 --- a/po/ko.po +++ b/po/ko.po @@ -2062,7 +2062,7 @@ msgid "Low-level Commands / Interrogators" msgstr "보조 명령 / 정보 획득 기능" #: help.c:37 -msgid "Low-level Commands / Syncing Repositories" +msgid "Low-level Commands / Synching Repositories" msgstr "보조 명령 / 저장소 동기화 기능" #: help.c:38 Range-diff against v1: 1: 381e2c1fc3 ! 1: 674edefc99 doc: fix typos via codespell @@ compat/precompose_utf8.c: const char *precompose_string_if_needed(const char *in in = out; } - ## git-gui/git-gui.sh ## -@@ git-gui/git-gui.sh: foreach p [split $env(PATH) $_path_sep] { - if {[file pathtype $p] ne {absolute}} { - continue - } -- # Keep only the first occurence of any duplicates. -+ # Keep only the first occurrence of any duplicates. - set norm_p [file normalize $p] - dict set _path_seen $norm_p 1 - } - - ## git-gui/lib/choose_repository.tcl ## -@@ git-gui/lib/choose_repository.tcl: field w_recentlist ; # Listbox containing recent repositories - field w_localpath ; # Entry widget bound to local_path - - field done 0 ; # Finished picking the repository? --field clone_ok false ; # clone succeeeded -+field clone_ok false ; # clone succeeded - field local_path {} ; # Where this repository is locally - field origin_url {} ; # Where we are cloning from - field origin_name origin ; # What we shall call 'origin' - - ## git-gui/lib/themed.tcl ## -@@ - - namespace eval color { - # Variable colors -- # Preffered way to set widget colors is using add_option. -+ # Preferred way to set widget colors is using add_option. - # In some cases, like with tags in_diff/in_sel, we use these colors. - variable select_bg lightgray - variable select_fg black - ## hook.h ## @@ hook.h: struct run_hooks_opt { * While the callback allows piecemeal writing, it can also be @@ path.h: void safe_create_dir(struct repository *repo, const char *dir, int share int safe_create_dir_in_gitdir(struct repository *repo, const char *path); - ## po/el.po ## -@@ po/el.po: msgid "Low-level Commands / Interrogators" - msgstr "Εντολές Χαμηλού Επιπέδου / Ερωτημάτων" - - #: help.c:37 --msgid "Low-level Commands / Synching Repositories" -+msgid "Low-level Commands / Syncing Repositories" - msgstr "Εντολές Χαμηλού Επιπέδου / Συγχρονισμού Αποθετηρίων" - - #: help.c:38 - - ## po/ko.po ## -@@ po/ko.po: msgid "Low-level Commands / Interrogators" - msgstr "보조 명령 / 정보 획득 기능" - - #: help.c:37 --msgid "Low-level Commands / Synching Repositories" -+msgid "Low-level Commands / Syncing Repositories" - msgstr "보조 명령 / 저장소 동기화 기능" - - #: help.c:38 - ## reftable/system.h ## @@ reftable/system.h: struct reftable_flock { * to acquire the lock. If `timeout_ms` is 0 we don't wait, if it is negative
-- 2.54.0