git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH] generate-configlist: collapse depfile for older Ninja

From
Toon Claes <toon@iotcl.com>
Date
Apr 21, 2026, 19:17 UTC
Message-ID
<20260421-toon-fix-almalinux8-v1-1-aec1d54addde@iotcl.com>
The tools/generate-configlist.sh script generates two files:
  * config-list.h
  * config-list.h.d

The former is included by the source code and the latter defines on which files the former depends.

The contents of `config-list.h.d` consists of two sections:
    config-list.h: Documentation/config.adoc
    config-list.h: Documentation/git-config.adoc
    config-list.h: Documentation/config/add.adoc
    config-list.h: Documentation/config/advice.adoc
    config-list.h: Documentation/config/alias.adoc
    config-list.h: Documentation/config/am.adoc
    config-list.h: Documentation/config/apply.adoc
    ...

This first section actually defines on which individual files `config-list.h` depends and thus needs to be rebuild if one of those changes.

And the second section contains content like:
    Documentation/config.adoc:
    Documentation/git-config.adoc:
    Documentation/config/add.adoc:
    Documentation/config/advice.adoc:
    Documentation/config/alias.adoc:
    Documentation/config/am.adoc:
    Documentation/config/apply.adoc:
    ...

These rules exist to ensure Make won't fail with the following error if one of the .adoc files is renamed or removed:

   make: *** No rule to make target 'Documentation/config.adoc', needed by 'config-list.h'.

With the no-op targets defined in `config-list.h.d`, Make knows there's no work to be done to generate these files, so it doesn't error out if it doesn't exist.

For the Makefile build system this works great. And since ebeea3c471 (build: regenerate config-list.h when Documentation changes, 2026-02-24) this script is also called from the Meson build system. Nevertheless, on AlmaLinux 8 the following build failure is seen:

    ninja: error: dependency cycle: config-list.h -> config-list.h

This version of this distro uses Ninja 1.8.2 and it seems to have some issues with the format of the `config-list.h.d` file.

Ninja versions before 1.10.0 do not reset the depfile parser state on newlines. This causes issues when the depfile has one dependency per line, like we have in `config-list.h.d`:

    config-list.h: Documentation/config.adoc
    config-list.h: Documentation/config/add.adoc

The parser only recognizes the first "config-list.h:" as a target. On subsequent lines it is still in dependency-parsing mode, so the repeated output name is recorded as an input. This causes the error mentioned above.

The bug in Ninja is fixed in 1.10, with commit ninja-build/ninja@1daa7470ab7e (depfile_parser: remove restriction on multiple outputs, 2019-11-20).

To be compatible with older versions of Ninja, add a fourth optional argument to `generate-configlist.sh` that can be empty or "collapse". When this argument is "collapse", there is a post-processing step on `config-list.h.d` to put the dependencies for `config-list.h` on a single line, like:

    config-list.h: Documentation/config.adoc Documentation/config/add.adoc ...
This works around the bug in older versions of Ninja.

In `meson.build`, the Ninja version is detected to determine if the "collapse" argument needs to be provided to the script. Thus newer versions of Ninja, and the Makefile build system still get dependencies on separate lines in `config-list.h.d`.

In this post-processing, also the no-op targets are dropped because they are simply not needed for Ninja.

Signed-off-by: Toon Claes <toon@iotcl.com>
---
At GitLab we build images for various distros, including AlmaLinux 8.
On this distro we got this error while compiling Git.
    ninja: error: dependency cycle: config-list.h -> config-list.h

It seems this is caused by a bug in older versions of Ninja. There are more details in the commit message, but here are a few simple steps to reproduce:

docker run --rm -it -v $(pwd):/git -w /git almalinux:8 bash
    dnf -yq install epel-release
    dnf -yq install shadow-utils sudo make pkg-config gcc findutils \
        diffutils perl python3 gawk gettext zlib-devel expat-devel \
        openssl-devel curl-devel pcre2-devel cargo
    pip3 install --prefix=/usr meson ninja==1.8.2
    meson setup build --warnlevel 2 --werror
    ninja -C build config-list.h
    ninja -C build config-list.h   # fails with dependency cycle
---
 meson.build                  | 10 ++++++++++
 tools/generate-configlist.sh | 24 +++++++++++++++++++++++-
 2 files changed, 33 insertions(+), 1 deletion(-)
diff --git a/meson.build b/meson.build
index 11488623bf..44e6f679c3 100644
--- a/meson.build
+++ b/meson.build
@@ -725,6 +725,15 @@ if not get_option('breaking_changes')
   builtin_sources += 'builtin/pack-redundant.c'
 endif
 
+configlist_gen_format = ''
+if get_option('backend') == 'ninja'
+  ninja = find_program('ninja', 'ninja-build', native: true)
+  ninja_version = run_command(ninja, '--version', check: true).stdout().strip()
+  if ninja_version.version_compare('<1.10.0')
+    configlist_gen_format = 'collapse'
+  endif
+endif
+
 builtin_sources += custom_target(
   output: 'config-list.h',
   depfile: 'config-list.h.d',
@@ -735,6 +744,7 @@ builtin_sources += custom_target(
     meson.current_source_dir(),
     '@OUTPUT@',
     '@DEPFILE@',
+    configlist_gen_format,
   ],
   env: script_environment,
 )
diff --git a/tools/generate-configlist.sh b/tools/generate-configlist.sh
index e28054f9e0..553fbfeb4b 100755
--- a/tools/generate-configlist.sh
+++ b/tools/generate-configlist.sh
@@ -3,10 +3,14 @@
 SOURCE_DIR="$1"
 OUTPUT="$2"
 DEPFILE="$3"
+FORMAT="${4}"
 
 if test -z "$SOURCE_DIR" || ! test -d "$SOURCE_DIR" || test -z "$OUTPUT"
 then
-	echo >&2 "USAGE: $0 <SOURCE_DIR> <OUTPUT> [<DEPFILE>]"
+	echo >&2 "USAGE: $0 <SOURCE_DIR> <OUTPUT> [<DEPFILE> [collapse]]"
+	echo >&2 ""
+	echo >&2 "  Pass 'collapse' to write all deps on a single line."
+	echo >&2 "  Ninja < 1.10.0 chokes on depfiles with multiple lines."
 	exit 1
 fi
 
@@ -49,4 +53,22 @@ then
 			"$SOURCE_DIR"/Documentation/config/*.adoc |
 			sed -e 's/[# ]/\\&/g'
 	} >"$DEPFILE"
+
+	# Due to a bug in Ninja versions before 1.10.0 the depfile parser state
+	# is not reset on newlines, causing the target to be recorded as a
+	# dependency of itself when there is one dependency per line.
+	# The bug is fixed in ninja-build/ninja@1daa7470ab7e (depfile_parser:
+	# remove restriction on multiple outputs, 2019-11-20).
+	# But to work around the issue, do a "collapse" post-processing step
+	# if wanted.
+	if test "$FORMAT" = "collapse"
+	then
+		{
+			printf '%s: ' "$OUTPUT"
+			sed -n -e "s/^$QUOTED_OUTPUT: //p" "$DEPFILE" |
+				tr '\n' ' '
+			echo
+		} >"$DEPFILE.tmp"
+		mv "$DEPFILE.tmp" "$DEPFILE"
+	fi
 fi

---
base-commit: 94f057755b7941b321fd11fec1b2e3ca5313a4e0
change-id: 20260421-toon-fix-almalinux8-102de9138294
Next: Patrick Steinhardt
Message 1 of 12 in “generate-configlist: collapse depfile for older Ninja”
  1. generate-configlist: collapse depfile for older NinjaToon Claes, Apr 21, 2026
  2. Patrick SteinhardtApr 22, 2026
  3. Toon ClaesApr 22, 2026
  4. generate-configlist: collapse depfile for older NinjaToon Claes, Apr 22, 2026
  5. Patrick SteinhardtApr 22, 2026
  6. Phillip WoodApr 22, 2026
  7. Phillip WoodApr 22, 2026
  8. Toon ClaesMay 15, 2026
  9. generate-configlist: collapse depfile for older NinjaToon Claes, May 15, 2026
  10. Phillip WoodMay 15, 2026
  11. Patrick SteinhardtMay 21, 2026
  12. D. Ben KnobleApr 22, 2026

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.