[PATCH v8 0/3] teach submodules to know they're submodules
- From
Emily Shaffer <emilyshaffer@google.com>
- Date
- Mar 1, 2022, 00:26 UTC
- Message-ID
- <20220301002613.1459916-1-emilyshaffer@google.com>
- In-Reply-To
- <20220203215914.683922-1-emilyshaffer@google.com>
For the original cover letter, see https://lore.kernel.org/git/20210611225428.1208973-1-emilyshaffer%40google.com.
CI run: https://github.com/nasamuffin/git/actions/runs/1866957146
Since v7:
Actually a fairly large rework. Rather than keeping the path from gitdir to gitdir, just keep a boolean under 'submodule.hasSuperproject'. The idea is that from this boolean, we can decide whether to traverse the filesystem looking for a superproject.
Because this simplifies the implementation, I compressed the three middle commits into one. As proof-of-concept, I added a patch at the end to check for this boolean when running `git rev-parse --show-superproject-working-tree`.
One thing I'm not sure about: in the tests, I check whether the config is set, but not what the boolean value of it is. Is there a better way to do that? For example, I could imagine someone deciding to set `submodule.hasSuperproject = false` and the tests would not function correctly in that case. I think we don't really normalize the value on a boolean config like that, so I didn't want to write a lot of comparison to check if the value is 1 or true or True or TRUE or Yes or .... Am I overthinking it?
The other thing I'm not sure about: since it's just a bool, we're not restricted to setting this config only when we have both gitdir paths available. That makes me want to set the config any time we are doing something with submodules anyway, like any time 'git-submodule--helper' is used. But that helper seems to be called in the context of the superproject, not of the submodules, so adding this config for each submodule we touch would be a second child process. Is there some other common entry point for submodules that we can use?
- Emily
Since v6:
I've dropped the fifth commit to use this new config for `git rev-parse --show-superproject-working-tree`. I think it did more harm than good - that tool uses an odd way to determine whether the superproject is actually the superproject, anyways.
I poked a little bit at trying to find some benchmark to demonstrate that "submodule.superprojectGitDir" is actually faster - but I didn't end up able to write one without writing a ton of new code to traverse the filesystem. To be honest, I'm not all that interested in performance - I want the config added for correctness, instead.
So, the only real changes between v6 and v7 are some documentation changes suggested by Jonathan Tan (https://lore.kernel.org/git/20211117234300.2598132-1-jonathantanmy%40google.com).
Since v5:
A couple things. Firstly, a semantics change *back* to the semantics of v3 - we map from gitdir to gitdir, *not* from common dir to common dir, so that theoretically a submodule with multiple worktrees in multiple superproject worktrees will be able to figure out which worktree of the superproject it's in. (Realistically, that's not really possible right now, but I'd like to change that soon.)
Secondly, a rewording of comments and commit messages to indicate that this isn't a cache of some expensive operation, but rather intended to be the source of truth for all submodules. I also added a fifth commit rewriting `git rev-parse --show-superproject-working-tree` to demonstrate what that means in practice - but from a practical standpoint, I'm a little worried about that fifth patch. More details in the patch 5 description.
I did discuss Ævar's idea of relying on in-process filesystem digging to find the superproject's gitdir with the rest of the Google team, but in the end decided that there are some worries about filesystem digging in this way (namely, some ugly interactions with network drives that are actually already an issue for Googler Linux machines). Plus, the allure of being able to definitively know that we're a submodule is pretty strong. ;) But overall, this is the direction I'd prefer to keep going in, rather than trying to guess from the filesystem going forward.
Since v4:
The only real change here is a slight semantics change to map from <submodule gitdir> to <superproject common git dir>. In every case *except* for when the superproject has a worktree, this changes nothing. For the case when the superproject has a worktree, this means that now submodules will refer to the general superproject common dir (e.g. no worktree-specific refs or configs or whatnot).
I *think* that because a submodule should exist in the context of the common dir, not the worktree gitdir, that is ok. However, it does mean it would be difficult to do something like sharing a config specific to the worktree (the initial goal of this series).
$ROOT/.git $ROOT/.git/config.superproject <- shared by $ROOT/.git/modules/sub $ROOT/.git/modules/sub <- points to $ROOT/.git $ROOT/.git/worktrees/wt $ROOT/.git/worktrees/wt/config.superproject <- contains a certain config-based pre-commit hook
If the submodule only knows about the common dir, that is tough, because the submodule would basically have to guess which worktree it's in from its own path. There would be no way for '$WT/sub' to inherit '$ROOT/.git/worktrees/wt/config.superproject'.
That said... right now, we don't support submodules in worktrees very well at all. A submodule in a worktree will get a brand new gitdir in $ROOT/.git/worktrees/modules/ (and that brand new gitdir would point to the super's common dir). So I think we can punt on this entire question until we teach submodules and worktrees to play more gracefully together (it's on my long list...), and at that time we can probably introduce a pointer from $ROOT/.git/modules/sub/worktrees/wt/ to $ROOT/.git/worktrees/wt/....
Or, to summarize the long ramble above: "this is still kind of weird with worktrees, but let's fix it later when we fix worktrees more thoroughly".
(More rambling about worktree weirdness here: https://lore.kernel.org/git/YYRaII8YWVxlBqsF%40google.com )
Since v3, a pretty major change: the semantics of submodule.superprojectGitDir has changed, to point from the submodule's gitdir to the superproject's gitdir (in v3 and earlier, we kept a path from the submodule's *worktree* to the superproject's gitdir instead). This cleans up some of the confusions about the behavior when a submodule worktree moves around in the superproject's tree, or in a future when we support submodules having multiple worktrees.
I also tried to simplify the tests to use 'test-tool path-utils relative_path' everywhere - I think that makes them much more clear for a test reader, but if you're reviewing and it isn't obvious what we're testing for, please speak up.
I think this is pretty mature and there was a lot of general agreement that the gitdir->gitdir association was the way to go, so please be brutal and look for nits, leaks, etc. this round ;) [/v4 cover letter]
Emily Shaffer (3): t7400-submodule-basic: modernize inspect() helper introduce submodule.hasSuperproject record rev-parse: short-circuit superproject worktree when config unset
Documentation/config/submodule.txt | 6 ++++ builtin/submodule--helper.c | 5 +++ git-submodule.sh | 3 ++ submodule.c | 30 ++++++++++++++++++ t/t7400-submodule-basic.sh | 42 ++++++++++++------------- t/t7406-submodule-update.sh | 8 +++++ t/t7412-submodule-absorbgitdirs.sh | 50 ++++++++++++++++++++++++++++-- 7 files changed, 119 insertions(+), 25 deletions(-)
Range-diff against v7:
1: 1a85deb1c5 < -: ---------- introduce submodule.superprojectGitDir record
-: ---------- > 1: 251510c687 t7400-submodule-basic: modernize inspect() helper
2: 7a44b0edf9 ! 2: 34cbfd81ee submodule: record superproject gitdir during absorbgitdirs
@@ Metadata
Author: Emily Shaffer <emilyshaffer@google.com>
## Commit message ##
- submodule: record superproject gitdir during absorbgitdirs
+ introduce submodule.hasSuperproject record
- Already during 'git submodule add' we record a pointer to the
- superproject's gitdir. However, this doesn't help brand-new
- submodules created with 'git init' and later absorbed with 'git
- submodule absorbgitdirs'. Let's start adding that pointer during 'git
- submodule absorbgitdirs' too.
+ Teach submodules a config variable indicating the fact that they are a
+ submodule. If this config is set to false or unset, Git may assume the
+ current repo is not a submodule.
+
+ Git commands can use this variable to decide whether to traverse the
+ filesystem and look for a superproject at all. 'git rev-parse
+ --show-superproject-working-tree' can learn to exit early if this config
+ is unset or false. Other newly added or implicit behavior - like "git
+ status" showing the submodule's status in relation to the superproject,
+ or a config shared between the superproject and submodule - can use this
+ config to decide whether to search the parent directory to find a
+ superproject.
+
+ Introduce this config everywhere we add a new submodule, or touch one
+ that already exists, so that we can proliferate it in repos which are
+ already out in the world using submodules.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
+ Helped-by: Junio C Hamano <gitster@pobox.com>
## Documentation/config/submodule.txt ##
-@@ Documentation/config/submodule.txt: submodule.superprojectGitDir::
- reference to determine whether the current repo is a submodule to
- another repo; if this reference is absent, Git will treat the current
- repo as though it is not a submodule (this does not make a difference to
-- most Git commands). It is set automatically during submodule creation.
-+ most Git commands). It is set automatically during submodule creation
-+ and 'git submodule absorbgitdir'.
+@@ Documentation/config/submodule.txt: submodule.alternateErrorStrategy::
+ `ignore`, `info`, `die`. Default is `die`. Note that if set to `ignore`
+ or `info`, and if there is an error with the computed alternate, the
+ clone proceeds as if no alternate was specified.
++
++submodule.hasSuperproject::
++ Indicates whether this repository is a submodule. If this config is set
++ to 'true', Git may traverse the filesystem above this submodule in order
++ to identify the superproject. It is set automatically during submodule
++ creation, update, and 'git submodule absorbgitdir'.
+
+ ## builtin/submodule--helper.c ##
+@@ builtin/submodule--helper.c: static int clone_submodule(struct module_clone_data *clone_data)
+ git_config_set_in_file(p, "submodule.alternateErrorStrategy",
+ error_strategy);
+
++ /*
++ * Teach the submodule that it's a submodule.
++ */
++ git_config_set_in_file(p, "submodule.hasSuperproject", "true");
++
+ free(sm_alternate);
+ free(error_strategy);
+
+
+ ## git-submodule.sh ##
+@@ git-submodule.sh: cmd_update()
+ ;;
+ esac
+
++ # Note that the submodule is a submodule.
++ git -C "$sm_path" config submodule.hasSuperproject "true"
++
+ if test -n "$recursive"
+ then
+ (
## submodule.c ##
@@ submodule.c: static void relocate_single_git_dir_into_superproject(const char *path)
@@ submodule.c: static void relocate_single_git_dir_into_superproject(const char *p
const struct submodule *sub;
+ struct config_set sub_cs;
+ struct strbuf config_path = STRBUF_INIT, sb = STRBUF_INIT;
-+ int tmp;
if (submodule_uses_worktrees(path))
die(_("relocate_gitdir for submodule '%s' with "
@@ submodule.c: static void relocate_single_git_dir_into_superproject(const char *p
+ strbuf_addf(&config_path, "%s/config", real_new_git_dir);
+ git_configset_init(&sub_cs);
+ git_configset_add_file(&sub_cs, config_path.buf);
-+ /* return 0 indicates config was found - we have a worktree config */
-+ if (!git_configset_get_bool(&sub_cs, "extensions.worktreeConfig", &tmp))
-+ strbuf_addstr(&config_path, ".worktree");
+
-+ git_config_set_in_file(config_path.buf, "submodule.superprojectGitdir",
-+ relative_path(absolute_path(get_git_dir()),
-+ real_new_git_dir, &sb));
++ git_config_set_in_file(config_path.buf, "submodule.hasSuperproject",
++ "true");
+
+ git_configset_clear(&sub_cs);
+ strbuf_release(&config_path);
@@ submodule.c: static void relocate_single_git_dir_into_superproject(const char *p
free(real_old_git_dir);
free(real_new_git_dir);
+ ## t/t7400-submodule-basic.sh ##
+@@ t/t7400-submodule-basic.sh: inspect() {
+ git -C "$sub_dir" rev-parse HEAD >head-sha1 &&
+ git -C "$sub_dir" update-index --refresh &&
+ git -C "$sub_dir" diff-files --exit-code &&
++
++ # Ensure that submodule.hasSuperproject is set.
++ git -C "$sub_dir" config "submodule.hasSuperproject"
++
+ git -C "$sub_dir" clean -n -d -x >untracked
+ }
+
+
+ ## t/t7406-submodule-update.sh ##
+@@ t/t7406-submodule-update.sh: test_expect_success 'submodule update --quiet passes quietness to fetch with a s
+ )
+ '
+
++test_expect_success 'submodule update adds submodule.hasSuperproject to older repos' '
++ (cd super &&
++ git -C submodule config --unset submodule.hasSuperproject &&
++ git submodule update &&
++ git -C submodule config submodule.hasSuperproject
++ )
++'
++
+ test_done
+
## t/t7412-submodule-absorbgitdirs.sh ##
@@ t/t7412-submodule-absorbgitdirs.sh: test_expect_success 'absorb the git dir' '
git status >actual.1 &&
@@ t/t7412-submodule-absorbgitdirs.sh: test_expect_success 'absorb the git dir' '
- test_cmp expect.2 actual.2
+ test_cmp expect.2 actual.2 &&
+
-+ # make sure the submodule cached the superproject gitdir correctly
-+ submodule_gitdir="$(git -C sub1 rev-parse --path-format=absolute --git-common-dir)" &&
-+ superproject_gitdir="$(git rev-parse --path-format=absolute --git-common-dir)" &&
-+
-+ test-tool path-utils relative_path "$superproject_gitdir" \
-+ "$submodule_gitdir" >expect &&
-+ git -C sub1 config submodule.superprojectGitDir >actual &&
-+
-+ test_cmp expect actual
++ git -C sub1 config submodule.hasSuperproject
'
test_expect_success 'absorbing does not fail for deinitialized submodules' '
@@ t/t7412-submodule-absorbgitdirs.sh: test_expect_success 'absorb the git dir in a
- test_cmp expect.2 actual.2
+ test_cmp expect.2 actual.2 &&
+
-+ sub1_gitdir="$(git -C sub1 rev-parse --path-format=absolute --git-common-dir)" &&
-+ sub1_nested_gitdir="$(git -C sub1/nested rev-parse --path-format=absolute --git-common-dir)" &&
-+
-+ test-tool path-utils relative_path "$sub1_gitdir" "$sub1_nested_gitdir" \
-+ >expect &&
-+ git -C sub1/nested config submodule.superprojectGitDir >actual &&
-+
-+ test_cmp expect actual
++ git -C sub1/nested config submodule.hasSuperproject
'
test_expect_success 're-setup nested submodule' '
@@ t/t7412-submodule-absorbgitdirs.sh: test_expect_success 'absorbing fails for a s
+ # absorb the git dir
+ git submodule absorbgitdirs sub4 &&
+
-+ # make sure the submodule noted the superproject gitdir correctly
-+ submodule_gitdir="$(git -C sub4 rev-parse --absolute-git-dir)" &&
-+ superproject_gitdir="$(git rev-parse --absolute-git-dir)" &&
-+
-+ test-tool path-utils relative_path "$superproject_gitdir" \
-+ "$submodule_gitdir" >expect &&
-+ git -C sub4 config submodule.superprojectGitDir >actual &&
-+
-+ test_cmp expect actual
++ # make sure the submodule noted the superproject
++ git -C sub4 config submodule.hasSuperproject
+ )
+'
+
@@ t/t7412-submodule-absorbgitdirs.sh: test_expect_success 'absorbing fails for a s
+ # absorb the git dir
+ git submodule absorbgitdirs sub5 &&
+
-+ # make sure the submodule noted the superproject gitdir correctly
-+ submodule_gitdir="$(git -C sub5 rev-parse --absolute-git-dir)" &&
-+ superproject_gitdir="$(git rev-parse --absolute-git-dir)" &&
-+
-+ test-tool path-utils relative_path "$superproject_gitdir" \
-+ "$submodule_gitdir" >expect &&
-+ git -C sub5 config submodule.superprojectGitDir >actual &&
-+
-+ test_cmp expect actual &&
-+
-+ # make sure the config went into the submodule config.worktree
-+ test_file_not_empty "$submodule_gitdir/config.worktree"
++ # make sure the submodule noted the superproject
++ git -C sub5 config submodule.hasSuperproject
+ )
+'
+
3: 63e736e69d < -: ---------- submodule: record superproject gitdir during 'update'
-: ---------- > 3: c14ee8760f rev-parse: short-circuit superproject worktree when config unset-- 2.35.1.574.g5d30c73bfb-goog