git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH v7 06/31] directory rename detection: testcases checking which side did the rename

From
Elijah Newren <newren@gmail.com>
Date
Jan 30, 2018, 23:25 UTC
Message-ID
<20180130232533.25846-7-newren@gmail.com>
In-Reply-To
<20180130232533.25846-1-newren@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
---
 t/t6043-merge-rename-directories.sh | 336 ++++++++++++++++++++++++++++++++++++
 1 file changed, 336 insertions(+)
diff --git a/t/t6043-merge-rename-directories.sh b/t/t6043-merge-rename-directories.sh
index ac9c3e9974..fbeb8f4316 100755
--- a/t/t6043-merge-rename-directories.sh
+++ b/t/t6043-merge-rename-directories.sh
@@ -1172,4 +1172,340 @@ test_expect_failure '5d-check: Directory/file/file conflict due to directory ren
 #   back to old handling.  But, sadly, see testcases 8a and 8b.
 ###########################################################################
 
+
+###########################################################################
+# SECTION 6: Same side of the merge was the one that did the rename
+#
+# It may sound obvious that you only want to apply implicit directory
+# renames to directories if the _other_ side of history did the renaming.
+# If you did make an implementation that didn't explicitly enforce this
+# rule, the majority of cases that would fall under this section would
+# also be solved by following the rules from the above sections.  But
+# there are still a few that stick out, so this section covers them just
+# to make sure we also get them right.
+###########################################################################
+
+# Testcase 6a, Tricky rename/delete
+#   Commit O: z/{b,c,d}
+#   Commit A: z/b
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/b, CONFLICT(rename/delete, z/c -> y/c vs. NULL)
+#   Note: We're just checking here that the rename of z/b and z/c to put
+#         them under y/ doesn't accidentally catch z/d and make it look like
+#         it is also involved in a rename/delete conflict.
+
+test_expect_success '6a-setup: Tricky rename/delete' '
+	test_create_repo 6a &&
+	(
+		cd 6a &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		echo d >z/d &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git rm z/c &&
+		git rm z/d &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		mkdir y &&
+		git mv z/b y/ &&
+		git mv z/c y/ &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6a-check: Tricky rename/delete' '
+	(
+		cd 6a &&
+
+		git checkout A^0 &&
+
+		test_must_fail git merge -s recursive B^0 >out &&
+		test_i18ngrep "CONFLICT (rename/delete).*z/c.*y/c" out &&
+
+		git ls-files -s >out &&
+		test_line_count = 2 out &&
+		git ls-files -u >out &&
+		test_line_count = 1 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			:0:y/b :3:y/c &&
+		git rev-parse >expect \
+			 O:z/b  O:z/c &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6b, Same rename done on both sides
+#   (Related to testcases 6c and 8e)
+#   Commit O: z/{b,c}
+#   Commit A: y/{b,c}
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/{b,c}, z/d
+#   Note: If we did directory rename detection here, we'd move z/d into y/,
+#         but B did that rename and still decided to put the file into z/,
+#         so we probably shouldn't apply directory rename detection for it.
+
+test_expect_success '6b-setup: Same rename done on both sides' '
+	test_create_repo 6b &&
+	(
+		cd 6b &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		git mv z y &&
+		test_tick &&
+		git commit -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		mkdir z &&
+		echo d >z/d &&
+		git add z/d &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6b-check: Same rename done on both sides' '
+	(
+		cd 6b &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    B:z/d &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6c, Rename only done on same side
+#   (Related to testcases 6b and 8e)
+#   Commit O: z/{b,c}
+#   Commit A: z/{b,c} (no change)
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/{b,c}, z/d
+#   NOTE: Seems obvious, but just checking that the implementation doesn't
+#         "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6c-setup: Rename only done on same side' '
+	test_create_repo 6c &&
+	(
+		cd 6c &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		git commit --allow-empty -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		mkdir z &&
+		echo d >z/d &&
+		git add z/d &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6c-check: Rename only done on same side' '
+	(
+		cd 6c &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    B:z/d &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6d, We don't always want transitive renaming
+#   (Related to testcase 1c)
+#   Commit O: z/{b,c}, x/d
+#   Commit A: z/{b,c}, x/d (no change)
+#   Commit B: y/{b,c}, z/d
+#   Expected: y/{b,c}, z/d
+#   NOTE: Again, this seems obvious but just checking that the implementation
+#         doesn't "accidentally detect a rename" and give us y/{b,c,d}.
+
+test_expect_success '6d-setup: We do not always want transitive renaming' '
+	test_create_repo 6d &&
+	(
+		cd 6d &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		mkdir x &&
+		echo d >x/d &&
+		git add z x &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		git commit --allow-empty -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		git mv x z &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6d-check: We do not always want transitive renaming' '
+	(
+		cd 6d &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 3 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    O:x/d &&
+		test_cmp expect actual
+	)
+'
+
+# Testcase 6e, Add/add from one-side
+#   Commit O: z/{b,c}
+#   Commit A: z/{b,c} (no change)
+#   Commit B: y/{b,c,d_1}, z/d_2
+#   Expected: y/{b,c,d_1}, z/d_2
+#   NOTE: Again, this seems obvious but just checking that the implementation
+#         doesn't "accidentally detect a rename" and give us y/{b,c} +
+#         add/add conflict on y/d_1 vs y/d_2.
+
+test_expect_success '6e-setup: Add/add from one side' '
+	test_create_repo 6e &&
+	(
+		cd 6e &&
+
+		mkdir z &&
+		echo b >z/b &&
+		echo c >z/c &&
+		git add z &&
+		test_tick &&
+		git commit -m "O" &&
+
+		git branch O &&
+		git branch A &&
+		git branch B &&
+
+		git checkout A &&
+		test_tick &&
+		git commit --allow-empty -m "A" &&
+
+		git checkout B &&
+		git mv z y &&
+		echo d1 > y/d &&
+		mkdir z &&
+		echo d2 > z/d &&
+		git add y/d z/d &&
+		test_tick &&
+		git commit -m "B"
+	)
+'
+
+test_expect_success '6e-check: Add/add from one side' '
+	(
+		cd 6e &&
+
+		git checkout A^0 &&
+
+		git merge -s recursive B^0 &&
+
+		git ls-files -s >out &&
+		test_line_count = 4 out &&
+		git ls-files -u >out &&
+		test_line_count = 0 out &&
+		git ls-files -o >out &&
+		test_line_count = 1 out &&
+
+		git rev-parse >actual \
+			HEAD:y/b HEAD:y/c HEAD:y/d HEAD:z/d &&
+		git rev-parse >expect \
+			O:z/b    O:z/c    B:y/d    B:z/d &&
+		test_cmp expect actual
+	)
+'
+
+###########################################################################
+# Rules suggested by section 6:
+#
+#   Only apply implicit directory renames to directories if the other
+#   side of history is the one doing the renaming.
+###########################################################################
+
 test_done
-- 
2.16.1.106.gf69932adfe
Previous: Elijah NewrenNext: Elijah Newren
Message 8 of 63 in “Add directory rename detection to git”
  1. 00/31 Add directory rename detection to gitElijah Newren, Jan 30, 2018
  2. Elijah NewrenJan 30, 2018
  3. 24/31 merge-recursive: when comparing files, don't include treesElijah Newren, Jan 30, 2018
  4. 28/31 merge-recursive: fix remaining directory rename + dirty overwrite casesElijah Newren, Jan 30, 2018
  5. Stefan BellerFeb 5, 2018
  6. Elijah NewrenFeb 5, 2018
  7. 05/31 directory rename detection: files/directories in the way of some renamesElijah Newren, Jan 30, 2018
  8. 06/31 directory rename detection: testcases checking which side did the renameElijah Newren, Jan 30, 2018
  9. 10/31 directory rename detection: tests for handling overwriting untracked filesElijah Newren, Jan 30, 2018
  10. 15/31 merge-recursive: make !o->detect_rename codepath more obviousElijah Newren, Jan 30, 2018
  11. Stefan BellerFeb 2, 2018
  12. 14/31 merge-recursive: fix leaks of allocated renames and diff_filepairsElijah Newren, Jan 30, 2018
  13. Stefan BellerFeb 2, 2018
  14. 23/31 merge-recursive: check for file level conflicts then get new nameElijah Newren, Jan 30, 2018
  15. 30/31 merge-recursive: avoid spurious rename/rename conflict from dir renamesElijah Newren, Jan 30, 2018
  16. 16/31 merge-recursive: split out code for determining diff_filepairsElijah Newren, Jan 30, 2018
  17. Stefan BellerFeb 3, 2018
  18. Elijah NewrenFeb 3, 2018
  19. 11/31 directory rename detection: tests for handling overwriting dirty filesElijah Newren, Jan 30, 2018
  20. 22/31 merge-recursive: add computation of collisions due to dir rename & mergingElijah Newren, Jan 30, 2018
  21. 31/31 merge-recursive: ensure we write updates for directory-renamed fileElijah Newren, Jan 30, 2018
  22. Stefan BellerFeb 5, 2018
  23. 20/31 merge-recursive: check for directory level conflictsElijah Newren, Jan 30, 2018
  24. Stefan BellerFeb 5, 2018
  25. Elijah NewrenFeb 5, 2018
  26. 25/31 merge-recursive: apply necessary modifications for directory renamesElijah Newren, Jan 30, 2018
  27. SZEDER GáborFeb 16, 2018
  28. 17/31 merge-recursive: add a new hashmap for storing directory renamesElijah Newren, Jan 30, 2018
  29. Stefan BellerFeb 3, 2018
  30. Elijah NewrenFeb 3, 2018
  31. Johannes SixtFeb 4, 2018
  32. Elijah NewrenFeb 5, 2018
  33. Junio C HamanoFeb 5, 2018
  34. Stefan BellerFeb 5, 2018
  35. Elijah NewrenFeb 5, 2018
  36. 21/31 merge-recursive: add a new hashmap for storing file collisionsElijah Newren, Jan 30, 2018
  37. Stefan BellerFeb 5, 2018
  38. 29/31 directory rename detection: new testcases showcasing a pair of bugsElijah Newren, Jan 30, 2018
  39. 27/31 merge-recursive: fix overwriting dirty files involved in renamesElijah Newren, Jan 30, 2018
  40. Stefan BellerFeb 5, 2018
  41. Elijah NewrenFeb 5, 2018
  42. 03/31 directory rename detection: testcases to avoid taking detection too farElijah Newren, Jan 30, 2018
  43. 01/31 directory rename detection: basic testcasesElijah Newren, Jan 30, 2018
  44. 04/31 directory rename detection: partially renamed directory testcase/discussionElijah Newren, Jan 30, 2018
  45. 19/31 merge-recursive: add get_directory_renames()Elijah Newren, Jan 30, 2018
  46. Stefan BellerFeb 3, 2018
  47. Elijah NewrenFeb 3, 2018
  48. Elijah NewrenFeb 4, 2018
  49. Eric SunshineFeb 4, 2018
  50. Eric SunshineFeb 4, 2018
  51. Stefan BellerFeb 5, 2018
  52. 18/31 merge-recursive: make a helper function for cleanup for handle_renamesElijah Newren, Jan 30, 2018
  53. Stefan BellerFeb 3, 2018
  54. 02/31 directory rename detection: directory splitting testcasesElijah Newren, Jan 30, 2018
  55. 13/31 merge-recursive: introduce new functions to handle rename logicElijah Newren, Jan 30, 2018
  56. Stefan BellerFeb 2, 2018
  57. 12/31 merge-recursive: move the get_renames() functionElijah Newren, Jan 30, 2018
  58. Stefan BellerFeb 2, 2018
  59. 09/31 directory rename detection: miscellaneous testcases to complete coverageElijah Newren, Jan 30, 2018
  60. 08/31 directory rename detection: testcases exploring possibly suboptimal mergesElijah Newren, Jan 30, 2018
  61. 26/31 merge-recursive: avoid clobbering untracked files with directory renamesElijah Newren, Jan 30, 2018
  62. 07/31 directory rename detection: more involved edge/corner testcasesElijah Newren, Jan 30, 2018
  63. Stefan BellerFeb 5, 2018

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.