[RFC/PATCH v4 27/49] Documentation: add read-object-protocol.txt
From: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
Documentation/technical/read-object-protocol.txt | 102 +++++++++++++++++++++++
1 file changed, 102 insertions(+)
create mode 100644 Documentation/technical/read-object-protocol.txt
diff --git a/Documentation/technical/read-object-protocol.txt b/Documentation/technical/read-object-protocol.txt
new file mode 100644
index 0000000000..a893b46e7c
--- /dev/null
+++ b/Documentation/technical/read-object-protocol.txt
@@ -0,0 +1,102 @@
+Read Object Process
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The read-object process enables Git to read all missing blobs with a
+single process invocation for the entire life of a single Git command.
+This is achieved by using a packet format (pkt-line, see technical/
+protocol-common.txt) based protocol over standard input and standard
+output as follows. All packets, except for the "*CONTENT" packets and
+the "0000" flush packet, are considered text and therefore are
+terminated by a LF.
+
+Git starts the process when it encounters the first missing object that
+needs to be retrieved. After the process is started, Git sends a welcome
+message ("git-read-object-client"), a list of supported protocol version
+numbers, and a flush packet. Git expects to read a welcome response
+message ("git-read-object-server"), exactly one protocol version number
+from the previously sent list, and a flush packet. All further
+communication will be based on the selected version.
+
+The remaining protocol description below documents "version=1". Please
+note that "version=42" in the example below does not exist and is only
+there to illustrate how the protocol would look with more than one
+version.
+
+After the version negotiation Git sends a list of all capabilities that
+it supports and a flush packet. Git expects to read a list of desired
+capabilities, which must be a subset of the supported capabilities list,
+and a flush packet as response:
+------------------------
+packet: git> git-read-object-client
+packet: git> version=1
+packet: git> version=42
+packet: git> 0000
+packet: git< git-read-object-server
+packet: git< version=1
+packet: git< 0000
+packet: git> capability=get
+packet: git> capability=have
+packet: git> capability=put
+packet: git> capability=not-yet-invented
+packet: git> 0000
+packet: git< capability=get
+packet: git< 0000
+------------------------
+The only supported capability in version 1 is "get".
+
+Afterwards Git sends a list of "key=value" pairs terminated with a flush
+packet. The list will contain at least the command (based on the
+supported capabilities) and the sha1 of the object to retrieve. Please
+note, that the process must not send any response before it received the
+final flush packet.
+
+When the process receives the "get" command, it should make the requested
+object available in the git object store and then return success. Git will
+then check the object store again and this time find it and proceed.
+------------------------
+packet: git> command=get
+packet: git> sha1=0a214a649e1b3d5011e14a3dc227753f2bd2be05
+packet: git> 0000
+------------------------
+
+The process is expected to respond with a list of "key=value" pairs
+terminated with a flush packet. If the process does not experience
+problems then the list must contain a "success" status.
+------------------------
+packet: git< status=success
+packet: git< 0000
+------------------------
+
+In case the process cannot or does not want to process the content, it
+is expected to respond with an "error" status.
+------------------------
+packet: git< status=error
+packet: git< 0000
+------------------------
+
+In case the process cannot or does not want to process the content as
+well as any future content for the lifetime of the Git process, then it
+is expected to respond with an "abort" status at any point in the
+protocol.
+------------------------
+packet: git< status=abort
+packet: git< 0000
+------------------------
+
+Git neither stops nor restarts the process in case the "error"/"abort"
+status is set.
+
+If the process dies during the communication or does not adhere to the
+protocol then Git will stop the process and restart it with the next
+object that needs to be processed.
+
+After the read-object process has processed an object it is expected to
+wait for the next "key=value" list containing a command. Git will close
+the command pipe on exit. The process is expected to detect EOF and exit
+gracefully on its own. Git will wait until the process has stopped.
+
+A long running read-object process demo implementation can be found in
+`contrib/long-running-read-object/example.pl` located in the Git core
+repository. If you develop your own long running process then the
+`GIT_TRACE_PACKET` environment variables can be very helpful for
+debugging (see linkgit:git[1]).
--
2.13.1.565.gbfcd7a9048
Christian Couder <christian.couder@gmail.com>