[PATCH V4] git-send-email.perl: Add --to-cmd

From

Joe Perches <joe@perches.com>

Date

Sep 24, 2010, 17:03 UTC

Message-ID

<1285347780.11616.97.camel@Joe-Laptop>

In-Reply-To

<AANLkTinGZ1H3ODYwRhvzya_UkA8t2QTW7cEyjb2Hx_7M@mail.gmail.com>

Used a shared routine for --cc-cmd and --to-cmd.

Signed-off-by: Joe Perches <joe@perches.com>
---
 Documentation/git-send-email.txt |    8 +++++-
 git-send-email.perl              |   51 +++++++++++++++++++++++++------------
 t/t9001-send-email.sh            |   18 +++++++++++++
 3 files changed, 59 insertions(+), 18 deletions(-)

diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index c283084..fff97a3 100644
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -97,7 +97,7 @@ See the CONFIGURATION section for 'sendemail.multiedit'.
 	Specify the primary recipient of the emails generated. Generally, this
 	will be the upstream maintainer of the project involved. Default is the
 	value of the 'sendemail.to' configuration value; if that is unspecified,
-	this will be prompted for.
+	and --to-cmd is not specified, this will be prompted for.
 +
 The --to option must be repeated for each user you want on the to list.
 
@@ -177,6 +177,12 @@ user is prompted for a password while the input is masked for privacy.
 Automating
 ~~~~~~~~~~
 
+--to-cmd=<command>::
+	Specify a command to execute once per patch file which
+	should generate patch file specific "To:" entries.
+	Output of this command must be single email address per line.
+	Default is the value of 'sendemail.tocmd' configuration value.
+
 --cc-cmd=<command>::
 	Specify a command to execute once per patch file which
 	should generate patch file specific "Cc:" entries.
diff --git a/git-send-email.perl b/git-send-email.perl
index 6dab3bf..3acfdc2 100755
--- a/git-send-email.perl
+++ b/git-send-email.perl
@@ -70,6 +70,7 @@ git send-email [options] <file | directory | rev-list options >
 
   Automating:
     --identity              <str>  * Use the sendemail.<id> options.
+    --to-cmd                <str>  * Email To: via `<str> \$patch_path`
     --cc-cmd                <str>  * Email Cc: via `<str> \$patch_path`
     --suppress-cc           <str>  * author, self, sob, cc, cccmd, body, bodycc, all.
     --[no-]signed-off-by-cc        * Send to Signed-off-by: addresses. Default on.
@@ -187,7 +188,8 @@ sub do_edit {
 }
 
 # Variables with corresponding config settings
-my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc, $cc_cmd);
+my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc);
+my ($to_cmd, $cc_cmd);
 my ($smtp_server, $smtp_server_port, $smtp_authuser, $smtp_encryption);
 my ($identity, $aliasfiletype, @alias_files, @smtp_host_parts, $smtp_domain);
 my ($validate, $confirm);
@@ -214,6 +216,7 @@ my %config_settings = (
     "smtppass" => \$smtp_authpass,
 	"smtpdomain" => \$smtp_domain,
     "to" => \@to,
+    "tocmd" => \$to_cmd,
     "cc" => \@initial_cc,
     "cccmd" => \$cc_cmd,
     "aliasfiletype" => \$aliasfiletype,
@@ -272,6 +275,7 @@ my $rc = GetOptions("sender|from=s" => \$sender,
                     "in-reply-to=s" => \$initial_reply_to,
 		    "subject=s" => \$initial_subject,
 		    "to=s" => \@to,
+		    "to-cmd=s" => \$to_cmd,
 		    "no-to" => \$no_to,
 		    "cc=s" => \@initial_cc,
 		    "no-cc" => \$no_cc,
@@ -711,7 +715,7 @@ if (!defined $sender) {
 	$prompting++;
 }
 
-if (!@to) {
+if (!@to && !defined $to_cmd) {
 	my $to = ask("Who should the emails be sent to? ");
 	push @to, parse_address_line($to) if defined $to; # sanitized/validated later
 	$prompting++;
@@ -1238,21 +1242,10 @@ foreach my $t (@files) {
 	}
 	close F;
 
-	if (defined $cc_cmd && !$suppress_cc{'cccmd'}) {
-		open(F, "$cc_cmd \Q$t\E |")
-			or die "(cc-cmd) Could not execute '$cc_cmd'";
-		while(<F>) {
-			my $c = $_;
-			$c =~ s/^\s*//g;
-			$c =~ s/\n$//g;
-			next if ($c eq $sender and $suppress_from);
-			push @cc, $c;
-			printf("(cc-cmd) Adding cc: %s from: '%s'\n",
-				$c, $cc_cmd) unless $quiet;
-		}
-		close F
-			or die "(cc-cmd) failed to close pipe to '$cc_cmd'";
-	}
+	push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t)
+		if defined $to_cmd;
+	push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t)
+		if defined $cc_cmd && !$suppress_cc{'cccmd'};
 
 	if ($broken_encoding{$t} && !$has_content_type) {
 		$has_content_type = 1;
@@ -1310,6 +1303,30 @@ foreach my $t (@files) {
 	$message_id = undef;
 }
 
+# Execute a command (ie: $to_cmd) to get a list of email addresses
+# and return a results array
+sub recipients_cmd {
+	my ($prefix, $what, $cmd, $file) = @_;
+
+	my $sanitized_sender = sanitize_address($sender);
+	my @addresses = ();
+	open(F, "$cmd \Q$file\E |")
+	    or die "($prefix) Could not execute '$cmd'";
+	while(<F>) {
+		my $address = $_;
+		$address =~ s/^\s*//g;
+		$address =~ s/\s*$//g;
+		$address = sanitize_address($address);
+		next if ($address eq $sanitized_sender and $suppress_from);
+		push @addresses, $address;
+		printf("($prefix) Adding %s: %s from: '%s'\n",
+		       $what, $address, $cmd) unless $quiet;
+		}
+	close F
+	    or die "($prefix) failed to close pipe to '$cmd'";
+	return @addresses;
+}
+
 cleanup_compose_files();
 
 sub cleanup_compose_files() {
diff --git a/t/t9001-send-email.sh b/t/t9001-send-email.sh
index 71b3df9..36cf421 100755
--- a/t/t9001-send-email.sh
+++ b/t/t9001-send-email.sh
@@ -201,6 +201,24 @@ test_expect_success $PREREQ 'Prompting works' '
 		grep "^To: to@example.com\$" msgtxt1
 '
 
+test_expect_success $PREREQ 'tocmd works' '
+	clean_fake_sendmail &&
+	cp $patches tocmd.patch &&
+	echo tocmd--tocmd@example.com >>tocmd.patch &&
+	{
+	  echo "#!$SHELL_PATH"
+	  echo sed -n -e s/^tocmd--//p \"\$1\"
+	} > tocmd-sed &&
+	chmod +x tocmd-sed &&
+	git send-email \
+		--from="Example <nobody@example.com>" \
+		--to-cmd=./tocmd-sed \
+		--smtp-server="$(pwd)/fake.sendmail" \
+		tocmd.patch \
+		&&
+	grep "^To: tocmd@example.com" msgtxt1
+'
+
 test_expect_success $PREREQ 'cccmd works' '
 	clean_fake_sendmail &&
 	cp $patches cccmd.patch &&