[PATCH RFC 07/10] send-email: Remove horrible mix of tabs and spaces
- From
Michael Witten <mfwitten@gmail.com>
- Date
- Apr 11, 2009, 19:08 UTC
- Message-ID
- <1239476908-25944-7-git-send-email-mfwitten@gmail.com>
- In-Reply-To
- <1239476908-25944-6-git-send-email-mfwitten@gmail.com>
For the most part, I ran a search for all the lines that match:
^[\t]*[ ]+
and then I manually replaced the offending text with an appropriate number of tabs.
While scanning through the file, I also tried to format some of the code so as to obviate future mixing; I also fixed one horrendously egregious section of code, where someone was trying to be unnecessarily compact.
Currently, no lines match the following:
[\t]+[ ]+
[ ]+[\t]+So, it should be reasonably clean.
The whole file is still horrendous.
Signed-off-by: Michael Witten <mfwitten@gmail.com> --- git-send-email.perl | 278 +++++++++++++++++++++++++++++++-------------------- 1 files changed, 168 insertions(+), 110 deletions(-)
diff --git a/git-send-email.perl b/git-send-email.perl index d90c76e..4f0462f 100755 --- a/git-send-email.perl +++ b/git-send-email.perl @@ -16,6 +16,14 @@ # and second line is the subject of the message. # +## WARNING! ACHTUNG! ATTENTION! ADVERTENCIA! +## Currently, this file uses tabs (like the rest of git source) to +## delineate code structure. Do NOT under any circumstances mix tabs +## and spaces across lines that share a relationship in terms of layout. +## In fact, it would currently be best to use only tabs, so please set +## your editor(s) accordingly. This code is already trashy enough. Please +## don't make it worse. + use strict; use warnings; use Term::ReadLine; @@ -116,19 +124,20 @@ sub format_2822_time { die ("local time offset greater than or equal to 24 hours\n"); } - return sprintf("%s, %2d %s %d %02d:%02d:%02d %s%02d%02d", - qw(Sun Mon Tue Wed Thu Fri Sat)[$localtm[6]], - $localtm[3], - qw(Jan Feb Mar Apr May Jun - Jul Aug Sep Oct Nov Dec)[$localtm[4]], - $localtm[5]+1900, - $localtm[2], - $localtm[1], - $localtm[0], - ($offset >= 0) ? '+' : '-', - abs($offhour), - $offmin, - ); + return sprintf( + "%s, %2d %s %d %02d:%02d:%02d %s%02d%02d", + qw(Sun Mon Tue Wed Thu Fri Sat)[$localtm[6]], + $localtm[3], + qw(Jan Feb Mar Apr May Jun + Jul Aug Sep Oct Nov Dec)[$localtm[4]], + $localtm[5]+1900, + $localtm[2], + $localtm[1], + $localtm[0], + ($offset >= 0) ? '+' : '-', + abs($offhour), + $offmin, + ); } my $have_email_valid = eval { require Email::Valid; 1 }; @@ -192,29 +201,29 @@ my ($validate, $confirm); my (@suppress_cc); my %config_bool_settings = ( - "thread" => [\$thread, 1], - "chainreplyto" => [\$chain_reply_to, 1], - "suppressfrom" => [\$suppress_from, undef], - "signedoffbycc" => [\$signed_off_by_cc, undef], - "signedoffcc" => [\$signed_off_by_cc, undef], # Deprecated - "validate" => [\$validate, 1], + "thread" => [\$thread, 1], + "chainreplyto" => [\$chain_reply_to, 1], + "suppressfrom" => [\$suppress_from, undef], + "signedoffbycc" => [\$signed_off_by_cc, undef], + "signedoffcc" => [\$signed_off_by_cc, undef], # Deprecated + "validate" => [\$validate, 1], ); my %config_settings = ( - "smtpserver" => \$smtp_server, - "smtpserverport" => \$smtp_server_port, - "smtpuser" => \$smtp_authuser, - "smtppass" => \$smtp_authpass, - "to" => \@to, - "cc" => \@initial_cc, - "cccmd" => \$cc_cmd, - "aliasfiletype" => \$aliasfiletype, - "bcc" => \@bcclist, - "aliasesfile" => \@alias_files, - "suppresscc" => \@suppress_cc, - "envelopesender" => \$envelope_sender, - "multiedit" => \$multiedit, - "confirm" => \$confirm, + "smtpserver" => \$smtp_server, + "smtpserverport" => \$smtp_server_port, + "smtpuser" => \$smtp_authuser, + "smtppass" => \$smtp_authpass, + "to" => \@to, + "cc" => \@initial_cc, + "cccmd" => \$cc_cmd, + "aliasfiletype" => \$aliasfiletype, + "bcc" => \@bcclist, + "aliasesfile" => \@alias_files, + "suppresscc" => \@suppress_cc, + "envelopesender" => \$envelope_sender, + "multiedit" => \$multiedit, + "confirm" => \$confirm, ); # Handle Uncouth Termination @@ -245,37 +254,38 @@ $SIG{INT} = \&signal_handler; # Begin by accumulating all the variables (defined above), that we will end up # needing, first, from the command line: -my $rc = GetOptions("sender|from=s" => \$sender, - "in-reply-to=s" => \$initial_reply_to, - "subject=s" => \$initial_subject, - "to=s" => \@to, - "cc=s" => \@initial_cc, - "bcc=s" => \@bcclist, - "chain-reply-to!" => \$chain_reply_to, - "smtp-server=s" => \$smtp_server, - "smtp-server-port=i" => \$smtp_server_port, - "smtp-user=s" => \$smtp_authuser, - "smtp-pass:s" => \$smtp_authpass, - "smtp-ssl" => sub { $smtp_encryption = 'ssl' }, - "smtp-encryption=s" => \$smtp_encryption, - "identity=s" => \$identity, - "annotate" => \$annotate, - "compose" => \$compose, - "quiet" => \$quiet, - "cc-cmd=s" => \$cc_cmd, - "suppress-from!" => \$suppress_from, - "suppress-cc=s" => \@suppress_cc, - "signed-off-cc|signed-off-by-cc!" => \$signed_off_by_cc, - "confirm=s" => \$confirm, - "dry-run" => \$dry_run, - "envelope-sender=s" => \$envelope_sender, - "thread!" => \$thread, - "validate!" => \$validate, - "format-patch!" => \$format_patch, - ); +my $rc = GetOptions( + "sender|from=s" => \$sender, + "in-reply-to=s" => \$initial_reply_to, + "subject=s" => \$initial_subject, + "to=s" => \@to, + "cc=s" => \@initial_cc, + "bcc=s" => \@bcclist, + "chain-reply-to!" => \$chain_reply_to, + "smtp-server=s" => \$smtp_server, + "smtp-server-port=i" => \$smtp_server_port, + "smtp-user=s" => \$smtp_authuser, + "smtp-pass:s" => \$smtp_authpass, + "smtp-ssl" => sub { $smtp_encryption = 'ssl' }, + "smtp-encryption=s" => \$smtp_encryption, + "identity=s" => \$identity, + "annotate" => \$annotate, + "compose" => \$compose, + "quiet" => \$quiet, + "cc-cmd=s" => \$cc_cmd, + "suppress-from!" => \$suppress_from, + "suppress-cc=s" => \@suppress_cc, + "signed-off-cc|signed-off-by-cc!" => \$signed_off_by_cc, + "confirm=s" => \$confirm, + "dry-run" => \$dry_run, + "envelope-sender=s" => \$envelope_sender, + "thread!" => \$thread, + "validate!" => \$validate, + "format-patch!" => \$format_patch, +); unless ($rc) { - usage(); + usage(); } die "Cannot run git format-patch from outside a repository\n" @@ -404,29 +414,55 @@ sub split_addrs { my %aliases; my %parse_alias = ( # multiline formats can be supported in the future - mutt => sub { my $fh = shift; while (<$fh>) { - if (/^\s*alias\s+(\S+)\s+(.*)$/) { - my ($alias, $addr) = ($1, $2); - $addr =~ s/#.*$//; # mutt allows # comments - # commas delimit multiple addresses - $aliases{$alias} = [ split_addrs($addr) ]; - }}}, - mailrc => sub { my $fh = shift; while (<$fh>) { - if (/^alias\s+(\S+)\s+(.*)$/) { - # spaces delimit multiple addresses - $aliases{$1} = [ split(/\s+/, $2) ]; - }}}, - pine => sub { my $fh = shift; my $f='\t[^\t]*'; - for (my $x = ''; defined($x); $x = $_) { + mutt => sub { + + my $fh = shift; + + while (<$fh>) { + if (/^\s*alias\s+(\S+)\s+(.*)$/) { + my ($alias, $addr) = ($1, $2); + $addr =~ s/#.*$//; # mutt allows # comments + # commas delimit multiple addresses + $aliases{$alias} = [ split_addrs($addr) ]; + } + } + }, + + mailrc => sub { + + my $fh = shift; + + while (<$fh>) { + if (/^alias\s+(\S+)\s+(.*)$/) { + # spaces delimit multiple addresses + $aliases{$1} = [ split(/\s+/, $2) ]; + } + } + }, + + pine => sub { + + my $fh = shift; + my $f='\t[^\t]*'; + + for (my $x = ''; defined($x); $x = $_) { chomp $x; - $x .= $1 while(defined($_ = <$fh>) && /^ +(.*)$/); + $x .= $1 while(defined($_ = <$fh>) && /^ +(.*)$/); $x =~ /^(\S+)$f\t\(?([^\t]+?)\)?(:?$f){0,2}$/ or next; $aliases{$1} = [ split_addrs($2) ]; - }}, - gnus => sub { my $fh = shift; while (<$fh>) { - if (/\(define-mail-alias\s+"(\S+?)"\s+"(\S+?)"\)/) { - $aliases{$1} = [ $2 ]; - }}} + } + }, + + gnus => sub { + + my $fh = shift; + + while (<$fh>) { + if (/\(define-mail-alias\s+"(\S+?)"\s+"(\S+?)"\)/) { + $aliases{$1} = [ $2 ]; + } + } + } ); if (@alias_files and $aliasfiletype and defined $parse_alias{$aliasfiletype}) { @@ -574,10 +610,11 @@ EOT } elsif (/^\n$/) { $in_body = 1; if ($need_8bit_cte) { - print C2 "MIME-Version: 1.0\n", - "Content-Type: text/plain; ", - "charset=utf-8\n", - "Content-Transfer-Encoding: 8bit\n"; + print C2 + "MIME-Version: 1.0\n", + "Content-Type: text/plain; ", + "charset=utf-8\n", + "Content-Transfer-Encoding: 8bit\n"; } } elsif (/^MIME-Version:/i) { $need_8bit_cte = 0; @@ -586,8 +623,8 @@ EOT my $subject = $initial_subject; $_ = "Subject: " . ($subject =~ /[^[:ascii:]]/ ? - quote_rfc2047($subject) : - $subject) . + quote_rfc2047($subject) : + $subject) . "\n"; } elsif (/^In-Reply-To:\s*(.+)\s*$/i) { $initial_reply_to = $1; @@ -619,8 +656,10 @@ sub ask { my $resp; my $i = 0; return defined $default ? $default : undef - unless defined $term->IN and defined fileno($term->IN) and - defined $term->OUT and defined fileno($term->OUT); + unless defined $term->IN + and defined fileno($term->IN) + and defined $term->OUT + and defined fileno($term->OUT); while ($i++ < 10) { $resp = $term->readline($prompt); if (!defined $resp) { # EOF @@ -640,8 +679,12 @@ sub ask { my $prompting = 0; if (!defined $sender) { $sender = $repoauthor || $repocommitter || ''; - $sender = ask("Who should the emails appear to be from? [$sender] ", - default => $sender); + + $sender = ask( + "Who should the emails appear to be from? [$sender] ", + default => $sender + ); + print "Emails will be sent from: ", $sender, "\n"; $prompting++; } @@ -669,7 +712,8 @@ sub expand_aliases { if ($thread && !defined $initial_reply_to && $prompting) { $initial_reply_to = ask( - "Message-ID to be used as In-Reply-To for the first email? "); + "Message-ID to be used as In-Reply-To for the first email? " + ); } if (defined $initial_reply_to) { $initial_reply_to =~ s/^\s*<?//; @@ -809,18 +853,22 @@ sub sanitize_address sub send_message { my @recipients = unique_email_list(@to); - @cc = (grep { my $cc = extract_valid_address($_); - not grep { $cc eq $_ } @recipients - } - map { sanitize_address($_) } - @cc); + + @cc = (grep + { + my $cc = extract_valid_address($_); + not grep { $cc eq $_ } @recipients + } + map { sanitize_address($_) } @cc + ); + my $to = join (",\n\t", @recipients); @recipients = unique_email_list(@recipients,@cc,@bcclist); @recipients = (map { extract_valid_address($_) } @recipients); my $date = format_2822_time($time++); my $gitversion = '@@GIT_VERSION@@'; if ($gitversion =~ m/..GIT_VERSION../) { - $gitversion = Git::version(); + $gitversion = Git::version(); } my $cc = join(", ", unique_email_list(@cc)); @@ -869,9 +917,13 @@ X-Mailer: git-send-email $gitversion print " To retain the current behavior, but squelch this message,\n"; print " run 'git config --global sendemail.confirm auto'.\n\n"; } - $_ = ask("Send this email? ([y]es|[n]o|[q]uit|[a]ll): ", - valid_re => qr/^(?:yes|y|no|n|quit|q|all|a)/i, - default => $ask_default); + + $_ = ask( + "Send this email? ([y]es|[n]o|[q]uit|[a]ll): ", + valid_re => qr/^(?:yes|y|no|n|quit|q|all|a)/i, + default => $ask_default + ); + die "Send this email reply required" unless defined $_; if (/^n/i) { return 0; @@ -906,9 +958,13 @@ X-Mailer: git-send-email $gitversion } else { require Net::SMTP; - $smtp ||= Net::SMTP->new((defined $smtp_server_port) - ? "$smtp_server:$smtp_server_port" - : $smtp_server); + + $smtp ||= Net::SMTP->new( + (defined $smtp_server_port) + ? "$smtp_server:$smtp_server_port" + : $smtp_server + ); + if ($smtp_encryption eq 'tls') { require Net::SMTP::SSL; $smtp->command('STARTTLS'); @@ -1005,7 +1061,7 @@ foreach my $t (@files) { chomp($header[$#header]); s/^\s+/ /; $header[$#header] .= $_; - } else { + } else { push(@header, $_); } } @@ -1123,9 +1179,9 @@ foreach my $t (@files) { } else { push @xh, - 'MIME-Version: 1.0', - "Content-Type: text/plain; charset=$author_encoding", - 'Content-Transfer-Encoding: 8bit'; + 'MIME-Version: 1.0', + "Content-Type: text/plain; charset=$author_encoding", + 'Content-Transfer-Encoding: 8bit'; } } } @@ -1133,7 +1189,9 @@ foreach my $t (@files) { $needs_confirm = ( $confirm eq "always" or ($confirm =~ /^(?:auto|cc)$/ && @cc) or - ($confirm =~ /^(?:auto|compose)$/ && $compose && $message_num == 1)); + ($confirm =~ /^(?:auto|compose)$/ && $compose && $message_num == 1) + ); + $needs_confirm = "inform" if ($needs_confirm && $confirm_unconfigured && @cc); @cc = (@initial_cc, @cc);
-- 1.6.2.2.479.g2aec