Re: [PATCH] Remove the hard coded length limit on variable names in config files
On 09/29/2012 12:19 PM, Ben Walton wrote:
Show 18 quoted lines
> Previously while reading the variable names in config files, there was
> a 256 character limit with at most 128 of those characters being used
> by the section header portion of the variable name. This limitation
> was only enforced while reading the config files. It was possible to
> write a config file that was not subsequently readable.
>
> Instead of enforcing this limitation for both reading and writing,
> remove it entirely by changing the var member of the config_file
> struct to a strbuf instead of a fixed length buffer. Update all of
> the parsing functions in config.c to use the strbuf instead of the
> static buffer. Send the buf member of the strbuf to external callback
> functions to preserve the external api.
>
> Signed-off-by: Ben Walton <bdwalton@gmail.com>
> ---
> Hi Junio,
>
> (Sorry that this patch took so long to submit. I've been busy moving.)
The patch doesn't apply to the current master; it appears to have been built against master 883a2a3504 (2012-02-23) or older. It will have to be rebased to the current master.
Nevertheless I will add a few comments below.
Overall, I like your approach of using strbuf here, as it is simpler to use and less error-prone. It is also nice to get rid of an arbitrary length limit, especially since it was not consistently enforced.
Show 148 quoted lines
> I think this should remove the length limitations enforced while reading
> configuration file variable names.
>
> Thanks
> -Ben
>
> config.c | 50 +++++++++++++++++++++++---------------------------
> 1 file changed, 23 insertions(+), 27 deletions(-)
>
> diff --git a/config.c b/config.c
> index 40f9c6d..ee860a7 100644
> --- a/config.c
> +++ b/config.c
> @@ -10,8 +10,6 @@
> #include "strbuf.h"
> #include "quote.h"
>
> -#define MAXNAME (256)
> -
> typedef struct config_file {
> struct config_file *prev;
> FILE *f;
> @@ -19,7 +17,7 @@ typedef struct config_file {
> int linenr;
> int eof;
> struct strbuf value;
> - char var[MAXNAME];
> + struct strbuf var;
> } config_file;
>
> static config_file *cf;
> @@ -191,7 +189,7 @@ static inline int iskeychar(int c)
> return isalnum(c) || c == '-';
> }
>
> -static int get_value(config_fn_t fn, void *data, char *name, unsigned int len)
> +static int get_value(config_fn_t fn, void *data, struct strbuf *name)
> {
> int c;
> char *value;
> @@ -203,11 +201,9 @@ static int get_value(config_fn_t fn, void *data, char *name, unsigned int len)
> break;
> if (!iskeychar(c))
> break;
> - name[len++] = tolower(c);
> - if (len >= MAXNAME)
> - return -1;
> + strbuf_addch(name, tolower(c));
> }
> - name[len] = 0;
> +
> while (c == ' ' || c == '\t')
> c = get_next_char();
>
> @@ -219,10 +215,10 @@ static int get_value(config_fn_t fn, void *data, char *name, unsigned int len)
> if (!value)
> return -1;
> }
> - return fn(name, value, data);
> + return fn(name->buf, value, data);
> }
>
> -static int get_extended_base_var(char *name, int baselen, int c)
> +static int get_extended_base_var(struct strbuf *name, int c)
> {
> do {
> if (c == '\n')
> @@ -233,7 +229,7 @@ static int get_extended_base_var(char *name, int baselen, int c)
> /* We require the format to be '[base "extension"]' */
> if (c != '"')
> return -1;
> - name[baselen++] = '.';
> + strbuf_addch(name, '.');
>
> for (;;) {
> int c = get_next_char();
> @@ -246,34 +242,30 @@ static int get_extended_base_var(char *name, int baselen, int c)
> if (c == '\n')
> return -1;
> }
> - name[baselen++] = c;
> - if (baselen > MAXNAME / 2)
> - return -1;
> + strbuf_addch(name, c);
> }
>
> /* Final ']' */
> if (get_next_char() != ']')
> return -1;
> - return baselen;
> + return name->len;
> }
>
> -static int get_base_var(char *name)
> +static int get_base_var(struct strbuf *name)
> {
> - int baselen = 0;
> + strbuf_reset(name);
>
> for (;;) {
> int c = get_next_char();
> if (cf->eof)
> return -1;
> if (c == ']')
> - return baselen;
> + return name->len;
> if (isspace(c))
> - return get_extended_base_var(name, baselen, c);
> + return get_extended_base_var(name, c);
> if (!iskeychar(c) && c != '.')
> return -1;
> - if (baselen > MAXNAME / 2)
> - return -1;
> - name[baselen++] = tolower(c);
> + strbuf_addch(name, tolower(c));
> }
> }
>
> @@ -281,7 +273,7 @@ static int git_parse_file(config_fn_t fn, void *data)
> {
> int comment = 0;
> int baselen = 0;
> - char *var = cf->var;
> + struct strbuf *var = &cf->var;
>
> /* U+FEFF Byte Order Mark in UTF8 */
> static const unsigned char *utf8_bom = (unsigned char *) "\xef\xbb\xbf";
> @@ -320,14 +312,16 @@ static int git_parse_file(config_fn_t fn, void *data)
> baselen = get_base_var(var);
> if (baselen <= 0)
> break;
> - var[baselen++] = '.';
> - var[baselen] = 0;
> + strbuf_addch(var, '.');
> continue;
> }
> if (!isalpha(c))
> break;
> - var[baselen] = tolower(c);
> - if (get_value(fn, data, var, baselen+1) < 0)
> + /* Truncate the var name back to the section header prior to
> + grabbing the suffix part of the name and the value */
> + strbuf_setlen(var, baselen+1);
> + strbuf_addch(var, tolower(c));
> + if (get_value(fn, data, var) < 0)
> break;
> }
> die("bad config file line %d in %s", cf->linenr, cf->name);The preferred format for multiline comments in the git project is
/*
* Truncate the var name back to the section header prior to
* grabbing the suffix part of the name and the value.
*/It took me a while to figure out what you were doing here. Let me explain why.
In the old code, get_base_var() read the string into var and returned var's length (or -1 on error). The fact that the length of var was first "reset" to zero is somewhat implicit in the fact that no length parameter is being passed to get_base_var().
But in the new version, get_base_var() is passed a strbuf. Often, operations with strbufs append to the strbuf, and this is what I first assumed. It took me a while to realize that get_base_var() calls strbuf_reset() before getting to work. Moreover, get_base_var() still returns the length of what it found, which is redundant with a strbuf and therefore unexpected. So when the return value of get_base_var() is stored into baselen, it is not really obvious that it is the string's length.
Therefore, I suggest
* Call strbuf_reset() directly in get_parse_file() rather than in
get_base_var()
* Change get_base_var() to return 0 on success (rather than the length
of the string) and -1 on error (including length==0, which is also an
error in this context).
* Change how get_parse_file() initializes baselen to
if (get_base_var(var) < 0)
break;
strbuf_addch(var, '.');
baselen = var->len;Note that baselen now includes the trailing dot. Then later, you don't need the "+1":
/*
* Truncate the var name back to (section header plus '.')
* prior to grabbing the suffix part of the name and the value
*/
strbuf_setlen(var, baselen);
strbuf_addch(var, tolower(c));
if (get_value(fn, data, var) < 0)
[...]Show 16 quoted lines
> @@ -842,12 +836,14 @@ int git_config_from_file(config_fn_t fn, const char *filename, void *data)
> top.linenr = 1;
> top.eof = 0;
> strbuf_init(&top.value, 1024);
> + strbuf_init(&top.var, 1024);
> cf = ⊤
>
> ret = git_parse_file(fn, data);
>
> /* pop config-file parsing state stack */
> strbuf_release(&top.value);
> + strbuf_release(&top.var);
> cf = top.prev;
>
> fclose(f);
>
Finally, I realize that the MAXNAME constant was not exported and I can't find the old length limits documented anywhere, but I nevertheless worry a little bit that one of the users of the config API has a built-in assumption that names can never be longer than 256 characters (for example, a config_fn_t function might try to store the name into a fixed-length buffer). Hopefully such code would never have been written or accepted, but...? If you have thought about this or audited the callers, please mention that in your commit message.
Michael
--
Michael Haggerty
mhagger@alum.mit.edu
http://softwareswirl.blogspot.com/
Ben Walton
