[PATCH v2] cat-file: skip expanding default format

From: John Cai <johncai86@gmail.com>

When format is passed into --batch, --batch-check, --batch-command, the format gets expanded. When nothing is passed in, the default format is set and the expand_format() gets called.

We can save on these cycles by hardcoding how to print the information when nothing is passed as the format, or when the default format is passed. There is no need for the fully expanded format with the default. Since batch_object_write() happens on every object provided in batch mode, we get a nice performance improvement.

git rev-list --all > /tmp/all-obj.txt

git cat-file --batch-check </tmp/all-obj.txt

with HEAD^:

Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms] Range (min … max): 54.6 ms … 64.7 ms 50 runs

with HEAD:

Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms] Range (min … max): 46.9 ms … 55.9 ms 56 runs

If nothing is provided as a format argument, or if the default format is passed, skip expanding of the format and print the object info with a default format.

See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: John Cai <johncai86@gmail.com>
---
    optimize cat file batch info writing
    
    When cat-file --batch or --batch-check is used, we can skip having to
    expand the format if no format is specified or if the default format is
    specified. In this case we know exactly how to print the objects without
    the full expanded format.
    
    This was first discussed in [1].
    
    We get a little performance boost from this optimization because this
    happens for each objects provided to --batch, --batch-check, or
    --batch-command. Because batch_object_write() is called on every oid
    provided in batch mode, this optimization adds up when a large number of
    oid info is printed.
    
    git rev-list --all >/tmp/all-objs.txt
    
    git cat-file --batch-check </tmp/all-obj.txt (with hyperfine)
    
    run on origin/master:
    
    Time (mean ± σ): 57.6 ms ± 1.7 ms [User: 51.5 ms, System: 6.2 ms] Range
    (min … max): 54.6 ms … 64.7 ms 50 runs
    
    run on jc/optimize-cat-file-batch-default-format:
    
    Time (mean ± σ): 49.8 ms ± 1.7 ms [User: 42.6 ms, System: 7.3 ms] Range
    (min … max): 46.9 ms … 55.9 ms 56 runs
    
    Changes since v1:
    
     * set opt->format in batch_objects so that the loop that prints objects
       only has to check if the format is null to know to print the object
       info in the default format
     * fixed up commit trailer to include Ævar as Signed-off-by
    
     1. https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/

Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-git-1221%2Fjohn-cai%2Fjc%2Foptimize-cat-file-batch-default-format-v2
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-git-1221/john-cai/jc/optimize-cat-file-batch-default-format-v2
Pull-Request: https://github.com/git/git/pull/1221

Range-diff vs v1:

 1:  9f659b36c8f ! 1:  f5d578d14a9 cat-file: skip expanding default format
     @@ Commit message
          passed, skip expanding of the format and print the object info with a
          default format.
      
     -    Based-on-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
     -    Signed-off-by: John Cai <johncai86@gmail.com>
     -
          See https://lore.kernel.org/git/87eecf8ork.fsf@evledraar.gmail.com/
      
     +    Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
     +    Signed-off-by: John Cai <johncai86@gmail.com>
     +
       ## builtin/cat-file.c ##
     -@@
     - #include "object-store.h"
     - #include "promisor-remote.h"
     - 
     -+static const char *default_format = "%(objectname) %(objecttype) %(objectsize)";
     - struct batch_options {
     - 	int enabled;
     - 	int follow_symlinks;
      @@ builtin/cat-file.c: static void print_object_or_die(struct batch_options *opt, struct expand_data *d
       	}
       }
       
     -+static void print_default_format(char *buf, int len, struct expand_data *data)
     ++static int print_default_format(char *buf, int len, struct expand_data *data)
      +{
     -+	snprintf(buf, len, "%s %s %"PRIuMAX"\n", oid_to_hex(&data->oid),
     ++	return xsnprintf(buf, len, "%s %s %"PRIuMAX"\n", oid_to_hex(&data->oid),
      +		 data->info.type_name->buf,
      +		 (uintmax_t)*data->info.sizep);
      +
     @@ builtin/cat-file.c: static void batch_object_write(const char *obj_name,
       			       struct packed_git *pack,
       			       off_t offset)
       {
     -+	const char *fmt;
     -+
      +	struct strbuf type_name = STRBUF_INIT;
     ++
      +	if (!opt->format)
      +		data->info.type_name = &type_name;
      +
     @@ builtin/cat-file.c: static void batch_object_write(const char *obj_name,
       		}
       	}
       
     -+	if (!opt->format && !opt->print_contents) {
     +-	strbuf_reset(scratch);
     +-	strbuf_expand(scratch, opt->format, expand_format, data);
     +-	strbuf_addch(scratch, '\n');
     +-	batch_write(opt, scratch->buf, scratch->len);
     ++	if (!opt->format) {
      +		char buf[1024];
     -+
     -+		print_default_format(buf, 1024, data);
     -+		batch_write(opt, buf, strlen(buf));
     -+		goto cleanup;
     ++		int len = print_default_format(buf, 1024, data);
     ++		batch_write(opt, buf, len);
     ++	} else {
     ++		strbuf_reset(scratch);
     ++		strbuf_expand(scratch, opt->format, expand_format, data);
     ++		strbuf_addch(scratch, '\n');
     ++		batch_write(opt, scratch->buf, scratch->len);
      +	}
     -+
     -+	fmt = opt->format ? opt->format : default_format;
     - 	strbuf_reset(scratch);
     --	strbuf_expand(scratch, opt->format, expand_format, data);
     -+	strbuf_expand(scratch, fmt, expand_format, data);
     - 	strbuf_addch(scratch, '\n');
     - 	batch_write(opt, scratch->buf, scratch->len);
       
     -@@ builtin/cat-file.c: static void batch_object_write(const char *obj_name,
     + 	if (opt->print_contents) {
       		print_object_or_die(opt, data);
       		batch_write(opt, "\n", 1);
       	}
     @@ builtin/cat-file.c: static void batch_object_write(const char *obj_name,
       static void batch_one_object(const char *obj_name,
       			     struct strbuf *scratch,
       			     struct batch_options *opt,
     +@@ builtin/cat-file.c: static int batch_unordered_packed(const struct object_id *oid,
     + 				      data);
     + }
     + 
     ++
     ++#define DEFAULT_FORMAT "%(objectname) %(objecttype) %(objectsize)"
     ++
     + static int batch_objects(struct batch_options *opt)
     + {
     + 	struct strbuf input = STRBUF_INIT;
      @@ builtin/cat-file.c: static int batch_objects(struct batch_options *opt)
     - 	struct expand_data data;
       	int save_warning;
       	int retval = 0;
     --
     + 
      -	if (!opt->format)
      -		opt->format = "%(objectname) %(objecttype) %(objectsize)";
     -+	const char *fmt;
     - 
     +-
       	/*
       	 * Expand once with our special mark_query flag, which will prime the
     + 	 * object_info to be handed to oid_object_info_extended for each
      @@ builtin/cat-file.c: static int batch_objects(struct batch_options *opt)
       	 */
       	memset(&data, 0, sizeof(data));
       	data.mark_query = 1;
      -	strbuf_expand(&output, opt->format, expand_format, &data);
     -+	fmt = opt->format ? opt->format : default_format;
     -+	strbuf_expand(&output, fmt, expand_format, &data);
     ++	strbuf_expand(&output,
     ++		      opt->format ? opt->format : DEFAULT_FORMAT,
     ++		      expand_format,
     ++		      &data);
       	data.mark_query = 0;
       	strbuf_release(&output);
       	if (opt->cmdmode)
     + 		data.split_on_whitespace = 1;
     + 
     ++	if (opt->format && !strcmp(opt->format, DEFAULT_FORMAT))
     ++		opt->format = NULL;
     + 	/*
     + 	 * If we are printing out the object, then always fill in the type,
     + 	 * since we will want to decide whether or not to stream.
      
       ## t/perf/p1006-cat-file.sh (new) ##
      @@

 builtin/cat-file.c       | 46 ++++++++++++++++++++++++++++++++--------
 t/perf/p1006-cat-file.sh | 16 ++++++++++++++
 2 files changed, 53 insertions(+), 9 deletions(-)
 create mode 100755 t/perf/p1006-cat-file.sh