git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH 6/8] ls-files tests: filter `.gitconfig` from `--others` output

From
Johannes Schindelin via GitGitGadget <gitgitgadget@gmail.com>
Date
Apr 24, 2026, 15:01 UTC
Message-ID
<ef57244778d8f72754801d80a9e7e8ad034cec28.1777042877.git.gitgitgadget@gmail.com>
In-Reply-To
<pull.2098.git.1777042877.gitgitgadget@gmail.com>
From: Johannes Schindelin <johannes.schindelin@gmx.de>

The global `safe.bareRepository=all` setting in test-lib.sh is written to `$HOME/.gitconfig`, which unfortunately lives inside the test repository's working tree. The `.git/info/exclude` entry added alongside it handles most commands, but `git ls-files --others` without `--exclude-standard` does not consult `info/exclude` at all, so the file appears in the output.

Ideally, each test that accesses a bare repository would simply specify `--git-dir` or `GIT_DIR` explicitly, which would require no global config and produce no side effects in the working tree. As that approach was not taken, filter `.gitconfig` from the output before comparing against expected results. In t7104, the test already uses `--exclude-standard`, so it suffices to switch from the bare `git ls-files -o` to `git ls-files -o --exclude-standard` which respects the `info/exclude` entry; the other tests deliberately omit `--exclude-standard` because their purpose is to verify unfiltered `--others` output.

Assisted-by: Claude Opus 4.6
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
---
 t/t3000-ls-files-others.sh                         | 4 ++++
 t/t3001-ls-files-others-exclude.sh                 | 3 +++
 t/t3002-ls-files-dashpath.sh                       | 2 ++
 t/t3009-ls-files-others-nonsubmodule.sh            | 1 +
 t/t3011-common-prefixes-and-directory-traversal.sh | 3 ++-
 t/t7104-reset-hard.sh                              | 2 +-
 t/test-lib-functions.sh                            | 8 ++++++++
 7 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/t/t3000-ls-files-others.sh b/t/t3000-ls-files-others.sh
index b41e7f0daa..b4f0fbfc55 100755
--- a/t/t3000-ls-files-others.sh
+++ b/t/t3000-ls-files-others.sh
@@ -53,16 +53,19 @@ test_expect_success 'setup: expected output' '
 
 test_expect_success 'ls-files --others' '
 	git ls-files --others >output &&
+	test_filter_gitconfig output &&
 	test_cmp expected1 output
 '
 
 test_expect_success 'ls-files --others --directory' '
 	git ls-files --others --directory >output &&
+	test_filter_gitconfig output &&
 	test_cmp expected2 output
 '
 
 test_expect_success '--no-empty-directory hides empty directory' '
 	git ls-files --others --directory --no-empty-directory >output &&
+	test_filter_gitconfig output &&
 	test_cmp expected3 output
 '
 
@@ -70,6 +73,7 @@ test_expect_success 'ls-files --others handles non-submodule .git' '
 	mkdir not-a-submodule &&
 	echo foo >not-a-submodule/.git &&
 	git ls-files -o >output &&
+	test_filter_gitconfig output &&
 	test_cmp expected1 output
 '
 
diff --git a/t/t3001-ls-files-others-exclude.sh b/t/t3001-ls-files-others-exclude.sh
index 4b67646285..202fb8d9ea 100755
--- a/t/t3001-ls-files-others-exclude.sh
+++ b/t/t3001-ls-files-others-exclude.sh
@@ -72,6 +72,7 @@ test_expect_success 'git ls-files --others with various exclude options.' '
        --exclude-per-directory=.gitignore \
        --exclude-from=.git/ignore \
 	>output &&
+	test_filter_gitconfig output &&
 	test_cmp expect output
 '
 
@@ -84,6 +85,7 @@ test_expect_success 'git ls-files --others with \r\n line endings.' '
        --exclude-per-directory=.gitignore \
        --exclude-from=.git/ignore \
 	>output &&
+	test_filter_gitconfig output &&
 	test_cmp expect output
 '
 
@@ -99,6 +101,7 @@ test_expect_success 'git ls-files --others with various exclude options.' '
        --exclude-per-directory=.gitignore \
        --exclude-from=.git/ignore \
 	>output &&
+	test_filter_gitconfig output &&
 	test_cmp expect output
 '
 
diff --git a/t/t3002-ls-files-dashpath.sh b/t/t3002-ls-files-dashpath.sh
index 31462cb441..6acaadbd67 100755
--- a/t/t3002-ls-files-dashpath.sh
+++ b/t/t3002-ls-files-dashpath.sh
@@ -24,6 +24,7 @@ test_expect_success 'setup' '
 test_expect_success 'git ls-files without path restriction.' '
 	test_when_finished "rm -f expect" &&
 	git ls-files --others >output &&
+	test_filter_gitconfig output &&
 	cat >expect <<-\EOF &&
 	--
 	-foo
@@ -63,6 +64,7 @@ test_expect_success 'git ls-files with path restriction with -- --.' '
 test_expect_success 'git ls-files with no path restriction.' '
 	test_when_finished "rm -f expect" &&
 	git ls-files --others -- >output &&
+	test_filter_gitconfig output &&
 	cat >expect <<-\EOF &&
 	--
 	-foo
diff --git a/t/t3009-ls-files-others-nonsubmodule.sh b/t/t3009-ls-files-others-nonsubmodule.sh
index 963f3462b7..dc990c277b 100755
--- a/t/t3009-ls-files-others-nonsubmodule.sh
+++ b/t/t3009-ls-files-others-nonsubmodule.sh
@@ -36,6 +36,7 @@ test_expect_success 'setup: directories' '
 
 test_expect_success 'ls-files --others handles untracked git repositories' '
 	git ls-files -o >output &&
+	test_filter_gitconfig output &&
 	cat >expect <<-EOF &&
 	nonrepo-untracked-file/untracked
 	output
diff --git a/t/t3011-common-prefixes-and-directory-traversal.sh b/t/t3011-common-prefixes-and-directory-traversal.sh
index 3da5b2b6e7..455e97954d 100755
--- a/t/t3011-common-prefixes-and-directory-traversal.sh
+++ b/t/t3011-common-prefixes-and-directory-traversal.sh
@@ -26,7 +26,7 @@ test_expect_success 'setup' '
 '
 
 test_expect_success 'git ls-files -o shows the right entries' '
-	cat <<-EOF >expect &&
+	cat >expect <<-EOF &&
 	.gitignore
 	actual
 	an_ignored_dir/ignored
@@ -39,6 +39,7 @@ test_expect_success 'git ls-files -o shows the right entries' '
 	untracked_repo/
 	EOF
 	git ls-files -o >actual &&
+	test_filter_gitconfig actual &&
 	test_cmp expect actual
 '
 
diff --git a/t/t7104-reset-hard.sh b/t/t7104-reset-hard.sh
index 7948ec392b..c23d6e3f52 100755
--- a/t/t7104-reset-hard.sh
+++ b/t/t7104-reset-hard.sh
@@ -21,7 +21,7 @@ test_expect_success setup '
 	rm -f hello &&
 	mkdir -p hello &&
 	>hello/world &&
-	test "$(git ls-files -o)" = hello/world
+	test "$(git ls-files -o --exclude-standard)" = hello/world
 
 '
 
diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh
index f3af10fb7e..0505da78e8 100644
--- a/t/test-lib-functions.sh
+++ b/t/test-lib-functions.sh
@@ -2069,3 +2069,11 @@ test_trailing_hash () {
 test_redact_non_printables () {
     tr -d "\n\r" | tr "[\001-\040][\177-\377]" "."
 }
+
+# Remove .gitconfig entries from a file in place.  test-lib.sh may
+# create $HOME/.gitconfig (e.g. to set safe.bareRepository) which
+# can appear in ls-files or status output.
+test_filter_gitconfig () {
+	sed "/\\.gitconfig/d" "$1" >"$1.filtered" &&
+	mv "$1.filtered" "$1"
+}
-- 
gitgitgadget
Previous: Johannes Schindelin via GitGitGadgetNext: Junio C Hamano
Message 5 of 19 in “safe.bareRepository: default to "explicit" with WITH_BREAKING_CHANGES”
  1. 0/8 safe.bareRepository: default to "explicit" with WITH_BREAKING_CHANGESJohannes Schindelin via GitGitGadget, Apr 24, 2026
  2. 1/8 test-lib: allow bare repository access when breaking changes are enabledJohannes Schindelin via GitGitGadget, Apr 24, 2026
  3. 2/8 t7900: do not let `$HOME/.gitconfig` interfere with XDG testsJohannes Schindelin via GitGitGadget, Apr 24, 2026
  4. 3/8 t1300: remove global config settings injected by test-lib.shJohannes Schindelin via GitGitGadget, Apr 24, 2026
  5. 6/8 ls-files tests: filter `.gitconfig` from `--others` outputJohannes Schindelin via GitGitGadget, Apr 24, 2026
  6. Junio C HamanoApr 26, 2026
  7. 7/8 status tests: filter `.gitconfig` from status outputJohannes Schindelin via GitGitGadget, Apr 24, 2026
  8. 8/8 safe.bareRepository: default to "explicit" with WITH_BREAKING_CHANGESJohannes Schindelin via GitGitGadget, Apr 24, 2026
  9. 4/8 t1305: use `--git-dir=.` for bare repo in include cycle testJohannes Schindelin via GitGitGadget, Apr 24, 2026
  10. 5/8 t5601: restore `.gitconfig` after includeIf testJohannes Schindelin via GitGitGadget, Apr 24, 2026
  11. 0/8 safe.bareRepository: default to "explicit" with WITH_BREAKING_CHANGESJohannes Schindelin via GitGitGadget, Apr 26, 2026
  12. 1/8 test-lib: allow bare repository access when breaking changes are enabledJohannes Schindelin via GitGitGadget, Apr 26, 2026
  13. 2/8 t7900: do not let `$HOME/.gitconfig` interfere with XDG testsJohannes Schindelin via GitGitGadget, Apr 26, 2026
  14. 3/8 t1300: remove global config settings injected by test-lib.shJohannes Schindelin via GitGitGadget, Apr 26, 2026
  15. 4/8 t1305: use `--git-dir=.` for bare repo in include cycle testJohannes Schindelin via GitGitGadget, Apr 26, 2026
  16. 5/8 t5601: restore `.gitconfig` after includeIf testJohannes Schindelin via GitGitGadget, Apr 26, 2026
  17. 6/8 ls-files tests: filter `.gitconfig` from `--others` outputJohannes Schindelin via GitGitGadget, Apr 26, 2026
  18. 7/8 status tests: filter `.gitconfig` from status outputJohannes Schindelin via GitGitGadget, Apr 26, 2026
  19. 8/8 safe.bareRepository: default to "explicit" with WITH_BREAKING_CHANGESJohannes Schindelin via GitGitGadget, Apr 26, 2026

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.