Re: [PATCH v4] receive-pack: check if client is alive before completing the push

> I've read the upthread, but I still don't quite get why it's a must to
> unconditionally abort the push because the pusher went away.
>
> At this point we've passed the pre-receive hook, are about to migrate
> the objects, still have proc-receive left to run, and finally will
> update the refs.
>
> Is the motivation purely a UX change where it's considered that the user
> *must* be shown the output, or are we doing the wrong thing and not
> continuing at all if we run into SIGPIPE here (then presumably only for
> hooks that produce output?).
>
> I admit this is somewhat contrived, but aren't we now doing worse for
> users where the pre-receive hook takes 10s, but they already asked for
> their push to be performed. Then they disconnect from WiFi unexpectedly,
> and find that that it didn't go through?

> What I don't get is *if* we're doing this for the UX reason why are we
> singling out the pre-receive hook in particular, and not covering
> proc-receive? I.e. we'll also produce output the user might see there,
> as you can see with this ad-hoc testing change (showhing changed "git
> push" output when I add to the hook output):
>
> 	diff --git a/t/helper/test-proc-receive.c b/t/helper/test-proc-receive.c
> 	index cc08506cf0b..933f0599497 100644
> 	--- a/t/helper/test-proc-receive.c
> 	+++ b/t/helper/test-proc-receive.c
> 	@@ -188,6 +188,7 @@ int cmd__proc_receive(int argc, const char **argv)
> 	                if (returns.nr)
> 	                        for_each_string_list_item(item, &returns)
> 	                                fprintf(stderr, "proc-receive> %s\n", item->string);
> 	+               fprintf(stderr, "showing a custom message\n");
> 	        }
> 	 
> 	        if (die_write_report)
>
> 	$ ./t5411-proc-receive-hook.sh --run=1-3,5-42 -vixd
> 	[...]
> 	+ diff -u expect actual
> 	--- expect      2022-02-04 11:53:52.006413296 +0000
> 	+++ actual      2022-02-04 11:53:52.006413296 +0000
> 	@@ -3,6 +3,7 @@
> 	 remote: pre-receive< <ZERO-OID> <COMMIT-A> refs/for/main/topic        
> 	 remote: # proc-receive hook        
> 	 remote: proc-receive< <ZERO-OID> <COMMIT-A> refs/for/main/topic        
> 	+remote: showing a custom message        
> 	 remote: # post-receive hook        
> 	 remote: post-receive< <ZERO-OID> <COMMIT-A> refs/heads/next        
> 	 To <URL/of/upstream.git>
> 	error: last command exited with $?=1
>
> Is the unstated reason that we consider the tmp_objdir_migrate() more of
> a a point of no return?

> IOW I'm wondering why it doesn't look more like this (the object
> migration could probably be dropped, it should be near-ish instant, but
> proc-receive can take a long time):
>
> 	diff --git a/builtin/receive-pack.c b/builtin/receive-pack.c
> 	index f8b9a931273..33bbafbc9e2 100644
> 	--- a/builtin/receive-pack.c
> 	+++ b/builtin/receive-pack.c
> 	@@ -1907,6 +1907,26 @@ static void execute_commands_atomic(struct command *commands,
> 	 	strbuf_release(&err);
> 	 }
> 	 
> 	+static int pusher_went_away(struct command *commands, const char *msg)
> 	+{
> 	+	struct command *cmd;
> 	+	static const char buf[] = "0005\2";
> 	+
> 	+	/*
> 	+	 * Send a keepalive packet on sideband 2 (progress info) to notice
> 	+	 * a client that has disconnected (e.g. killed with ^C) while
> 	+	 * pre-receive was running.
> 	+	 */
> 	+	if (write_in_full(1, buf, sizeof(buf) - 1) < 0) {
> 	+		for (cmd = commands; cmd; cmd = cmd->next) {
> 	+			if (!cmd->error_string)
> 	+				cmd->error_string = msg;
> 	+		}
> 	+		return 1;
> 	+	}
> 	+	return 0;
> 	+}
> 	+
> 	 static void execute_commands(struct command *commands,
> 	 			     const char *unpacker_error,
> 	 			     struct shallow_info *si,
> 	@@ -1971,21 +1991,9 @@ static void execute_commands(struct command *commands,
> 	 		return;
> 	 	}
> 	 
> 	-	/*
> 	-	 * Send a keepalive packet on sideband 2 (progress info) to notice
> 	-	 * a client that has disconnected (e.g. killed with ^C) while
> 	-	 * pre-receive was running.
> 	-	 */
> 	-	if (use_sideband) {
> 	-		static const char buf[] = "0005\2";
> 	-		if (write_in_full(1, buf, sizeof(buf) - 1) < 0) {
> 	-			for (cmd = commands; cmd; cmd = cmd->next) {
> 	-				if (!cmd->error_string)
> 	-					cmd->error_string = "pusher went away";
> 	-			}
> 	-			return;
> 	-		}
> 	-	}
> 	+	if (use_sideband && pusher_went_away(commands,
> 	+					     "pusher can't be contacted post-pre-receive"))
> 	+		return;
> 	 
> 	 	/*
> 	 	 * Now we'll start writing out refs, which means the objects need
> 	@@ -2000,6 +2008,10 @@ static void execute_commands(struct command *commands,
> 	 	}
> 	 	tmp_objdir = NULL;
> 	 
> 	+	if (use_sideband && pusher_went_away(commands,
> 	+					     "pusher can't be contacted post-object migration"))
> 	+		return;
> 	+
> 	 	check_aliased_updates(commands);
> 	 
> 	 	free(head_name_to_free);
> 	@@ -2013,6 +2025,10 @@ static void execute_commands(struct command *commands,
> 	 			    (cmd->run_proc_receive || use_atomic))
> 	 				cmd->error_string = "fail to run proc-receive hook";
> 	 
> 	+	if (use_sideband && pusher_went_away(commands,
> 	+					     "pusher can't be contacted post-proc-receive"))
> 	+		return;
> 	+
> 	 	if (use_atomic)
> 	 		execute_commands_atomic(commands, si);
> 	 	else
>
> But also, this whole thing is "if the pre-receive hook etc. etc.", but
> we do in fact run this when there's no hook at all. See how this
> interacts with run_and_feed_hook() and the "!hook_path" check.
>
> So isn't this unnecessary if there's no such hook, and we should unfold
> the find_hook() etc. from that codepath (or pass up a "I ran the hook"
> state)?