Re: [RFC v3] cat-file: add a --stdin-cmd mode

> On Mon, Jan 31, 2022 at 9:34 PM John Cai <johncai86@gmail.com> wrote:
>>
>> This RFC patch proposes a new flag --batch-command that works with
>> git-cat-file --batch.
>
> The subject is "Re: [RFC v3] cat-file: add a --stdin-cmd mode" and now
> you are talking about '--batch-command' instead of '--stdin-cmd'.
>
> "that works with git-cat-file --batch" is not very clear. Maybe you
> could find a wording that explains better how --batch-command is
> different from --batch.
>
> Also I think at this point this should probably not be an RFC patch
> anymore but a regular one.
>
>> Similar to git-update-ref --stdin, it will accept
>> commands and arguments from stdin.
>>
>> The start of this idea was discussed in [1], where the original
>> motivation was to be able to control when the buffer was flushed to
>> stdout in --buffer mode.
>
> That would be nice in a cover letter but I am not sure a commit
> message is the right place for this.
>
>> However, this can actually be much more useful in situations when
>> git-cat-file --batch is being used as a long lived backend query
>> process. At GitLab, we use a pair of cat-file processes. One for
>> iterating over object metadata with --batch-check, and the other to grab
>> object contents with --batch. However, if we had --batch-command, we could
>> get rid of the second --batch-check process,
>
> Maybe s/second// would make it clear that there are no two
> --batch-command processes.
>
>> and just have one process
>> where we can flip between getting object info, and getting object contents.
>> This can lead to huge savings since on a given server there could be hundreds to
>> thousands of git cat-file processes at a time.
>
> It's not clear if all the git cat-file processes you are talking about
> are mostly --batch-check processes or --batch processes, or a roughly
> equal amount of both. My guess is the latter and that --batch-command
> would mean that there would be around two times fewer cat-file
> processes.
>
>> git cat-file --batch-command
>>
>> $ <command> [arg1] [arg2] NL
>
> It's a bit unclear what the 2 above lines mean. Maybe you could add a
> small explanation like for example "The new flag can be used like
> this:" and "It receives commands from stdin in the format:"
>
> Also not sure why there is a '$' char in front of '<command> [arg1]
> [arg2] NL' but not in front of 'git cat-file --batch-command'. It
> doesn't look like in the 'git update-ref --stdin' doc that '$' are
> used in front of the commands that can be passed through stdin.
>
>> This patch adds three commands: object, info, fflush
>
> Maybe s/three commands/the following first three commands/
>
>> $ object <sha1> NL
>> $ info <sha1> NL
>> $ fflush NL
>
> Idem about '$'.
>
>> These three would be immediately useful in GitLab's context, but one can
>> imagine this mode to be further extended for other things.
>
> Not very clear which "mode" you are talking about. You have been
> talking about a mode only in the subject so far. Maybe you should talk
> a bit about that above when '<command> [arg1] [arg2] NL' is
> introduced.
>
> Also you don't talk about the output format. --batch and --batch-check
> accept [=<format>], but it looks like --batch-command doesn't.
>
>> Future improvements:
>> - a non-trivial part of "cat-file --batch" time is spent
>> on parsing its argument and seeing if it's a revision, ref etc. So we
>> could add a command that only accepts a full-length 40
>> character SHA-1.
>
> In a cover letter that would be ok, but I am not sure that a commit
> message is the best place for this kind of details about future work.
>
>> This would be the first step in adding such an interface to
>> git-cat-file.
>>
>> [1] https://lore.kernel.org/git/pull.1124.git.git.1636149400.gitgitgadget@gmail.com/
>>
>> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
>> Signed-off-by: John Cai <johncai86@gmail.com>
>> ---
>>
>> Taylor, I'd be interested in your thoughts on this proposal since you helped
>> review the previous patch that turned into this RFC. Thanks!
>>
>> Changes from v2:
>>
>> - refactored tests to be within run_tests()
>> - added a test to test --buffer behavior with fflush
>> - cleaned up cat-file.c: clarified var names, removed unnecessary code
>>   based on suggestions from Phillip Wood
>> - removed strvec changes
>>
>> Changes from v1:
>>
>> - changed option name to batch-command.
>> - changed command function interface to receive the whole line after the command
>>   name to put the onus of parsing arguments to each individual command function.
>> - pass in whole line to batch_one_object in both parse_cmd_object and
>>   parse_cmd_info to support spaces in the object reference.
>> - removed addition of -z to include in a separate patch series
>> - added documentation.
>> ---
>>  Documentation/git-cat-file.txt |  15 +++++
>>  builtin/cat-file.c             | 114 +++++++++++++++++++++++++++++++--
>>  t/t1006-cat-file.sh            |  83 ++++++++++++++++++++++++
>>  3 files changed, 205 insertions(+), 7 deletions(-)
>>
>> diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt
>> index bef76f4dd0..254e546c79 100644
>> --- a/Documentation/git-cat-file.txt
>> +++ b/Documentation/git-cat-file.txt
>> @@ -96,6 +96,21 @@ OPTIONS
>>         need to specify the path, separated by whitespace.  See the
>>         section `BATCH OUTPUT` below for details.
>>
>> +--batch-command::
>> +       Enter a command mode that reads from stdin.
>
> Maybe s/a command mode that reads from stdin/a mode that reads
> commands from stdin/
>
> Also I would expect something about the output, like perhaps "...and
> ouputs the command results to stdout".
>
>> May not be combined with any
>> +       other options or arguments except `--textconv` or `--filters`, in which
>> +       case the input lines also need to specify the path, separated by
>> +       whitespace.  See the section `BATCH OUTPUT` below for details.
>
> The BATCH OUTPUT section says that a format can be passed but that
> doesn't seem to be the case with --batch-command. So you might need to
> make some changes to that section too or add a bit more details about
> the output here.

>
>> +object <object>::
>> +       Print object contents for object reference <object>
>> +
>> +info <object>::
>> +       Print object info for object reference <object>
>> +
>> +flush::
>> +       Flush to stdout immediately when used with --buffer
>> +
>>  --batch-all-objects::
>>         Instead of reading a list of objects on stdin, perform the
>>         requested batch operation on all objects in the repository and
>> diff --git a/builtin/cat-file.c b/builtin/cat-file.c
>> index 7b3f42950e..cc9e47943b 100644
>> --- a/builtin/cat-file.c
>> +++ b/builtin/cat-file.c
>> @@ -24,9 +24,11 @@ struct batch_options {
>>         int buffer_output;
>>         int all_objects;
>>         int unordered;
>> -       int cmdmode; /* may be 'w' or 'c' for --filters or --textconv */
>> +       int mode; /* may be 'w' or 'c' for --filters or --textconv */
>>         const char *format;
>> +       int command;
>>  };
>
> Maybe add a blank line here.
>
>> +static char line_termination = '\n';
>>
>>  static const char *force_path;
>>
>> @@ -302,19 +304,19 @@ static void print_object_or_die(struct batch_options *opt, struct expand_data *d
>>         if (data->type == OBJ_BLOB) {
>>                 if (opt->buffer_output)
>>                         fflush(stdout);
>> -               if (opt->cmdmode) {
>> +               if (opt->mode) {
>
> The mechanical s/cmdmode/mode/g change could have been made in a
> preparatory patch to make this patch a bit smaller and easier to
> digest.
>
>> +static void batch_objects_command(struct batch_options *opt,
>> +                                   struct strbuf *output,
>> +                                   struct expand_data *data)
>> +{
>> +       struct strbuf input = STRBUF_INIT;
>> +
>> +       /* Read each line dispatch its command */
>> +       while (!strbuf_getwholeline(&input, stdin, line_termination)) {
>> +               int i;
>> +               const struct parse_cmd *cmd = NULL;
>> +               const char *p, *cmd_end;
>> +
>> +               if (*input.buf == line_termination)
>> +                       die("empty command in input");
>> +               else if (isspace(*input.buf))
>> +                       die("whitespace before command: %s", input.buf);
>> +
>> +               for (i = 0; i < ARRAY_SIZE(commands); i++) {
>> +                       const char *prefix = commands[i].prefix;
>> +                       char c;
>> +                       if (!skip_prefix(input.buf, prefix, &cmd_end))
>> +                               continue;
>> +                       /*
>> +                        * If the command has arguments, verify that it's
>> +                        * followed by a space. Otherwise, it shall be followed
>> +                        * by a line terminator.
>> +                        */
>> +                       c = commands[i].takes_args ? ' ' : line_termination;
>> +                       if (input.buf[strlen(prefix)] != c)
>> +                               die("arguments invalid for command: %s", commands[i].prefix);
>> +
>> +                       cmd = &commands[i];
>> +                       if (cmd->takes_args) {
>> +                               p = cmd_end + 1;
>> +                               // strip newline before handing it to the
>> +                               // handling function
>
> So above the /* */ comments delimiters are used but here // is used. I
> am not sure we support // these days, but if we do, I think it would
> be better to avoid mixing comment styles in the same function.
>
>> +                               input.buf[strcspn(input.buf, "\n")] = '\0';
>> +                       }
>> +
>> +                       break;
>> +               }
>> +
>> +               if (!cmd)
>> +                       die("unknown command: %s", input.buf);
>> +
>> +               cmd->fn(opt, p, output, data);
>> +       }
>> +       strbuf_release(&input);
>> +}
>
>> @@ -590,6 +682,9 @@ static int batch_objects(struct batch_options *opt)
>>         save_warning = warn_on_object_refname_ambiguity;
>>         warn_on_object_refname_ambiguity = 0;
>>
>> +       if (command)
>> +               batch_objects_command(opt, &output, &data);
>> +
>>         while (strbuf_getline(&input, stdin) != EOF) {
>
> I think batch_objects_command() will consume everything from stdin, so
> it doesn't make sense to try to read again from stdin after it. Maybe
> the whole while (...) { ... } clause should be inside an else clause
> or something.
>
>>                 if (data.split_on_whitespace) {
>>                         /*
>> @@ -636,6 +731,7 @@ static int batch_option_callback(const struct option *opt,
>>
>>         bo->enabled = 1;
>>         bo->print_contents = !strcmp(opt->long_name, "batch");
>> +       bo->command = !strcmp(opt->long_name, "batch-command");
>>         bo->format = arg;
>>
>>         return 0;