Re: [PATCH] rerere: keep a background gc from killing a rebase

> On 02/09/2026 15:27, Phillip Wood wrote:
>> To me this is another reason why we should disable gc.auto while
>> rebasing. To do that we need to pass "-c gc.auto=false -c
>> maintenance.auto=false" when running "git commit" in run_git_commit()
>> and also when running "git merge" in do_merge(). We should also pass
>> those settings via GIT_CONFIG_PARAMETERS when running a exec command in
>> do_exec(). That is largly papering over the cracks but until we have a
>> systematic solution it does at least stop exposing users to this bug.
> 
> OK, I'll do that. It is also more consistent than it looks: the
> commits the sequencer creates in-process via try_to_commit() don't run
> auto maintenance at all, only the "git commit" child does (for a
> resolved, reworded or squashed commit). What surprised me is that a
> rebase with the merge backend then never runs maintenance, not even at
> the end, because it doesn't go through finish_rebase() where the apply
> backend runs it. Do you want a single run at the end of the sequence
> in that patch, or keep it minimal?

> FWIW, the tool I hit this with has been setting both for its whole
> process tree since, and the failures stopped.
> 
>>> When it is the rebase, it dies in do_pick_commit()
>>
>> That's a bug us well - we should be returning errors, not dying
>> -rerere_setup() should be returning an error, so we can clean up and
>> reschedule the pick.
> 
> Yes. I don't think we even need to reschedule: when repo_rerere() is
> called there, the merge result is already in the index and worktree,
> the error and advice have been printed, and the return value is
> ignored. If setup_rerere() reports the lock and returns -1, the pick
> just stops at the conflict like any other, minus rerere's recording
> and replay, and --continue works. 

>> I think my preferred solution is to disable gc while rebasing. Returning
>> an error from rerere_setup() would also help in the case where the user
>> runs "git commit" and then continues the rebase. I'd be interested to
>> hear what Junio and Patrick think about that.
> 
> So v2 would be two patches: rerere returning an error on a busy lock
> (with "rerere gc" still warning and skipping as in v1, and a commit
> message that talks about the fix instead of the trace), and the
> sequencer disabling gc.auto/maintenance.auto for "git commit", "git
> merge" and exec. I'll wait for Junio and Patrick before rerolling in
> case they see it differently.
> 
> Patrick, one thing I noticed on the way: since 452b12c2e0
> (builtin/maintenance: use "geometric" strategy by default, 2026-02-24)
> every "maintenance run --auto" runs rerere-gc as soon as rr-cache has
> even a single entry, stale or not. The doc for
> maintenance.rerere-gc.auto says the heuristic may be refined; that
> would make this rare for every command, not only the sequencer. Not
> touching it in this series, just mentioning it.
> 
> Thanks,
> Tom
> 
> 
> Am Mi., 2. Sept. 2026 um 15:27 Uhr schrieb Phillip Wood
> <phillip.wood123@gmail.com>:
>>
>> Hi Thomas
>>
>> On 02/09/2026 09:31, Thomas Bachem via GitGitGadget wrote:
>>> From: Thomas Bachem <mail@thomasbachem.com>
>>>
>>> Since 2.54 unscheduled maintenance uses the "geometric" strategy, so
>>
>> That change really is the gift that keeps on giving
>>
>>> the "git maintenance run --auto --detach" behind every "git commit"
>>> runs "git rerere gc" in the background whenever rr-cache has an entry.
>>> That includes the "git commit" the sequencer runs for a resolved pick
>>> on "git rebase --continue".
>>>
>>> rerere_gc() takes MERGE_RR.lock through setup_rerere(), which uses
>>> LOCK_DIE_ON_ERROR, and so does the sequencer's repo_rerere() at the
>>> next conflict a few milliseconds later. Whichever comes second dies.
>>
>> To me this is another reason why we should disable gc.auto while
>> rebasing. To do that we need to pass "-c gc.auto=false -c
>> maintenance.auto=false" when running "git commit" in run_git_commit()
>> and also when running "git merge" in do_merge(). We should also pass
>> those settings via GIT_CONFIG_PARAMETERS when running a exec command in
>> do_exec(). That is largly papering over the cracks but until we have a
>> systematic solution it does at least stop exposing users to this bug.
>>
>>> When it is the rebase, it dies in do_pick_commit()
>>
>> That's a bug us well - we should be returning errors, not dying
>> -rerere_setup() should be returning an error, so we can clean up and
>> reschedule the pick.
>>
>> There is a lot of detail here about what causes the problem which is
>> helpful, but there is very little discussion about the fix. As I
>> understand it we now block the sequencer until the background
>> maintenance has completed, or continue to die in an inconvenient state
>> we timeout before the background maintenance finishes. That seems rather
>> unfortunate as the idea of running the maintenance in the background is
>> to prevent it from interfering with other commands.
>>
>> I think my preferred solution is to disable gc while rebasing. Returning
>> an error from rerere_setup() would also help in the case where the user
>> runs "git commit" and then continues the rebase. I'd be interested to
>> hear what Junio and Patrick think about that. I'm also not clear why
>> gc.auto has to fork a separate process just to check if it needs to run
>> or not, I've not been following closely but my impression is that that
>> is the cause of quite a lot of the lock contention bugs we've seen.
>>
>> Thanks
>>
>> Phillip
>>
>>> with the index
>>> written but before make_patch() writes rebase-merge/{message,patch,
>>> stopped-sha}, and every later "git rebase --continue" refuses with
>>> "you have staged changes in your working tree". When it is the "git
>>> commit" of a later continue, that one dies in its post-commit
>>> repo_rerere() after the commit was made. Before 2.54 the same
>>> collision needed an auto gc to actually run, since gc runs
>>> "rerere gc" at its end.
>>>
>>> A rebase with two conflicts in a row shows it. The filler makes the
>>> pick slower than the ~5 ms the background task needs to take the
>>> lock, and keeps the lock held for about 0.4 s. It hit 6 of 6 runs
>>> here on 2.55.0, and a test suite driving rebases on toy repositories
>>> with a single rr-cache entry hit it in both runs that were traced:
>>>
>>>       git init -q -b main r && cd r
>>>       git config rerere.enabled true
>>>       git config maintenance.auto false
>>>       mkdir pad && seq 20000 | (cd pad && split -l 1 -a 5)
>>>       echo base >f && git add -A && git commit -qm base
>>>       git checkout -q -b topic
>>>       echo b >f && git commit -qam B
>>>       echo c >f && git commit -qam C
>>>       git checkout -q main
>>>       echo a >f && git commit -qam A
>>>       git repack -adq
>>>       seq 20000 | awk '{printf ".git/rr-cache/%040x\n", $1}' \
>>>           | xargs mkdir -p
>>>       for d in .git/rr-cache/*/; do echo x >$d/preimage; done
>>>       git config --unset maintenance.auto
>>>       git checkout -q topic
>>>       git rebase main
>>>       echo ab >f && git add f
>>>       GIT_EDITOR=true git rebase --continue
>>>
>>> The second continue dies with "Unable to create '.git/MERGE_RR.lock':
>>> File exists" while the gc spawned by its own commit holds the lock,
>>> and after resolving C every further continue refuses. Maintenance
>>> stays off during the setup so that no repack is pending: a repack due
>>> at that commit runs ahead of rerere-gc in the task list and would
>>> spend the window.
>>>
>>> The gc needs the lock: it removes every rr-cache directory it finds
>>> empty, and a rerere that has just created its directory but not yet
>>> written the preimage looks exactly like that. So keep the lock and fix
>>> both orders. When the gc finds the lock busy, let it warn and do
>>> nothing this time, the way "maintenance run" treats its own lock, so a
>>> manual "git rerere gc" sees the warning and the maintenance task and
>>> "git gc" see a clean exit. When the gc holds the lock, let every other
>>> caller wait it out instead of dying at once, for rerere.lockTimeout
>>> milliseconds with the semantics of core.packedRefsTimeout: 1000 by
>>> default, 0 for the old behaviour, -1 for an unbounded wait. Walking a
>>> 20000-entry rr-cache takes about 0.4 s here.
>>>
>>> That rebase now completes. The tests cover the gc under a held lock,
>>> directly and through the maintenance task, a merge that waits a lock
>>> out within a five second rerere.lockTimeout, and one that fails at
>>> once with a timeout of 0.
>>>
>>> Assisted-by: Claude Fable 5.1
>>> Signed-off-by: Thomas Bachem <mail@thomasbachem.com>
>>> ---
>>>       rerere: keep a background gc from killing a rebase
>>>
>>> Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2214%2Fthomasbachem%2Frerere-gc-lock-v1
>>> Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2214/thomasbachem/rerere-gc-lock-v1
>>> Pull-Request: https://github.com/gitgitgadget/git/pull/2214
>>>
>>>    Documentation/config/rerere.adoc |  8 +++++++
>>>    Documentation/git-rerere.adoc    |  4 +++-
>>>    rerere.c                         | 27 +++++++++++++++++----
>>>    rerere.h                         |  1 +
>>>    t/t4200-rerere.sh                | 40 ++++++++++++++++++++++++++++++++
>>>    t/t7900-maintenance.sh           |  8 +++++++
>>>    6 files changed, 82 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/Documentation/config/rerere.adoc b/Documentation/config/rerere.adoc
>>> index 3a78b5ebb1..8041a1587b 100644
>>> --- a/Documentation/config/rerere.adoc
>>> +++ b/Documentation/config/rerere.adoc
>>> @@ -10,3 +10,11 @@ rerere.enabled::
>>>        enabled if there is an `rr-cache` directory under the
>>>        `$GIT_DIR`, e.g. if "rerere" was previously used in the
>>>        repository.
>>> +
>>> +rerere.lockTimeout::
>>> +     The length of time, in milliseconds, to retry when trying to
>>> +     take the rerere lock while another process holds it, typically
>>> +     a background `git rerere gc`.  Value 0 means not to retry at
>>> +     all; -1 means to try indefinitely.  Default is 1000 (i.e.,
>>> +     retry for 1 second).  `git rerere gc` itself does not wait and
>>> +     skips its run instead.
>>> diff --git a/Documentation/git-rerere.adoc b/Documentation/git-rerere.adoc
>>> index 4e6ab9a27c..05935b0603 100644
>>> --- a/Documentation/git-rerere.adoc
>>> +++ b/Documentation/git-rerere.adoc
>>> @@ -70,7 +70,9 @@ occurred a long time ago.  By default, unresolved conflicts older
>>>    than 15 days and resolved conflicts older than 60
>>>    days are pruned.  These defaults are controlled via the
>>>    `gc.rerereUnresolved` and `gc.rerereResolved` configuration
>>> -variables respectively.
>>> +variables respectively.  If another process holds the lock on the
>>> +recorded resolutions, for example a merge or rebase that is recording
>>> +a conflict, `gc` does nothing and reports so.
>>>
>>>
>>>    DISCUSSION
>>> diff --git a/rerere.c b/rerere.c
>>> index 8232542585..22d114262b 100644
>>> --- a/rerere.c
>>> +++ b/rerere.c
>>> @@ -32,6 +32,7 @@ static int rerere_enabled = -1;
>>>
>>>    /* automatically update cleanly resolved paths to the index */
>>>    static int rerere_autoupdate;
>>> +static int rerere_lock_timeout_ms = 1000;
>>>
>>>    #define RR_HAS_POSTIMAGE 1
>>>    #define RR_HAS_PREIMAGE 2
>>> @@ -876,6 +877,8 @@ static void git_rerere_config(void)
>>>    {
>>>        repo_config_get_bool(the_repository, "rerere.enabled", &rerere_enabled);
>>>        repo_config_get_bool(the_repository, "rerere.autoupdate", &rerere_autoupdate);
>>> +     repo_config_get_int(the_repository, "rerere.locktimeout",
>>> +                         &rerere_lock_timeout_ms);
>>>        repo_config(the_repository, git_default_config, NULL);
>>>    }
>>>
>>> @@ -908,12 +911,26 @@ int setup_rerere(struct repository *r, struct string_list *merge_rr, int flags)
>>>
>>>        if (flags & (RERERE_AUTOUPDATE|RERERE_NOAUTOUPDATE))
>>>                rerere_autoupdate = !!(flags & RERERE_AUTOUPDATE);
>>> -     if (flags & RERERE_READONLY)
>>> +     if (flags & RERERE_READONLY) {
>>>                fd = 0;
>>> -     else
>>> +     } else if (flags & RERERE_SKIP_LOCKED) {
>>>                fd = hold_lock_file_for_update(&write_lock,
>>> -                                            git_path_merge_rr(r),
>>> -                                            LOCK_DIE_ON_ERROR);
>>> +                                            git_path_merge_rr(r), 0);
>>> +             if (fd < 0) {
>>> +                     warning_errno(_("unable to lock '%s', skipping"),
>>> +                                   git_path_merge_rr(r));
>>> +                     return -1;
>>> +             }
>>> +     } else {
>>> +             /*
>>> +              * A background "rerere gc" holds the lock for as long as it
>>> +              * takes to walk rr-cache, so wait it out rather than die.
>>> +              */
>>> +             fd = hold_lock_file_for_update_timeout(&write_lock,
>>> +                                                    git_path_merge_rr(r),
>>> +                                                    LOCK_DIE_ON_ERROR,
>>> +                                                    rerere_lock_timeout_ms);
>>> +     }
>>>        read_rr(r, merge_rr);
>>>        return fd;
>>>    }
>>> @@ -1237,7 +1254,7 @@ void rerere_gc(struct repository *r, struct string_list *rr)
>>>        timestamp_t cutoff_resolve = now - 60 * 86400;
>>>        struct strbuf buf = STRBUF_INIT;
>>>
>>> -     if (setup_rerere(r, rr, 0) < 0)
>>> +     if (setup_rerere(r, rr, RERERE_SKIP_LOCKED) < 0)
>>>                return;
>>>
>>>        repo_config_get_expiry_in_days(the_repository, "gc.rerereresolved",
>>> diff --git a/rerere.h b/rerere.h
>>> index d4b5f7c932..87964bb3c5 100644
>>> --- a/rerere.h
>>> +++ b/rerere.h
>>> @@ -10,6 +10,7 @@ struct repository;
>>>    #define RERERE_AUTOUPDATE   01
>>>    #define RERERE_NOAUTOUPDATE 02
>>>    #define RERERE_READONLY     04
>>> +#define RERERE_SKIP_LOCKED  010
>>>
>>>    /*
>>>     * Marks paths that have been hand-resolved and added to the
>>> diff --git a/t/t4200-rerere.sh b/t/t4200-rerere.sh
>>> index 1717f407c8..6b90294435 100755
>>> --- a/t/t4200-rerere.sh
>>> +++ b/t/t4200-rerere.sh
>>> @@ -242,6 +242,46 @@ test_expect_success 'old records rest in peace' '
>>>        test_path_is_missing $rr2/preimage
>>>    '
>>>
>>> +test_expect_success 'gc does nothing while MERGE_RR is locked' '
>>> +     mkdir -p $rr2 &&
>>> +     echo Hello >$rr2/preimage &&
>>> +     test-tool chmtime =$just_over_15_days_ago $rr2/preimage &&
>>> +
>>> +     test_when_finished "rm -f .git/MERGE_RR.lock" &&
>>> +     >.git/MERGE_RR.lock &&
>>> +     git rerere gc 2>err &&
>>> +     test_grep "MERGE_RR" err &&
>>> +     test_path_is_file $rr2/preimage &&
>>> +
>>> +     rm .git/MERGE_RR.lock &&
>>> +     git rerere gc &&
>>> +     test_path_is_missing $rr2/preimage
>>> +'
>>> +
>>> +test_expect_success 'a held lock is waited out within rerere.lockTimeout' '
>>> +     git reset --hard &&
>>> +     rm -rf $rr &&
>>> +     test_when_finished "rm -f .git/MERGE_RR.lock" &&
>>> +     >.git/MERGE_RR.lock &&
>>> +     {
>>> +             (sleep 1 && rm -f .git/MERGE_RR.lock) &
>>> +     } &&
>>> +     test_must_fail git -c rerere.lockTimeout=5000 merge first 2>err &&
>>> +     wait &&
>>> +     test_grep ! "Unable to create" err &&
>>> +     grep "^=======\$" $rr/preimage
>>> +'
>>> +
>>> +test_expect_success 'rerere.lockTimeout=0 fails at once on a held lock' '
>>> +     git reset --hard &&
>>> +     rm -rf $rr &&
>>> +     test_when_finished "rm -f .git/MERGE_RR.lock" &&
>>> +     >.git/MERGE_RR.lock &&
>>> +     test_must_fail git -c rerere.lockTimeout=0 merge first 2>err &&
>>> +     test_grep "Unable to create" err &&
>>> +     test_path_is_missing $rr/preimage
>>> +'
>>> +
>>>    rerere_gc_custom_expiry_test () {
>>>        five_days="$1" right_now="$2"
>>>        test_expect_success "rerere gc with custom expiry ($five_days, $right_now)" '
>>> diff --git a/t/t7900-maintenance.sh b/t/t7900-maintenance.sh
>>> index d7f82e1bec..a55ca2e829 100755
>>> --- a/t/t7900-maintenance.sh
>>> +++ b/t/t7900-maintenance.sh
>>> @@ -885,6 +885,14 @@ test_expect_success 'rerere-gc task with --auto honors maintenance.rerere-gc.aut
>>>        test_expect_rerere_gc ! git -c maintenance.rerere-gc.auto=0 maintenance run --auto --task=rerere-gc
>>>    '
>>>
>>> +test_expect_success 'rerere-gc task succeeds while MERGE_RR is locked' '
>>> +     test_when_finished "rm -rf .git/rr-cache .git/MERGE_RR.lock" &&
>>> +     mkdir .git/rr-cache &&
>>> +     : >.git/rr-cache/entry &&
>>> +     >.git/MERGE_RR.lock &&
>>> +     test_expect_rerere_gc git maintenance run --task=rerere-gc
>>> +'
>>> +
>>>    test_expect_success '--auto and --schedule incompatible' '
>>>        test_must_fail git maintenance run --auto --schedule=daily 2>err &&
>>>        test_grep "cannot be used together" err
>>>
>>> base-commit: e9019fcafe0040228b8631c30f97ae1adb61bcdc
>>