Re: List all commits of a specified file in oldest to newest order
- From
Ævar Arnfjörð Bjarmason <avarab@gmail.com>
- Date
- Nov 9, 2021, 09:42 UTC
- Message-ID
- <211109.864k8lvesb.gmgdl@evledraar.gmail.com>
- In-Reply-To
- <182017f6-5dcd-70f0-e0bc-98721c433bf3@onenetbeyond.org>
On Tue, Nov 09 2021, Vipul Kumar wrote:
Show 16 quoted lines
> On 11/5/21 8:13 AM, Ævar Arnfjörð Bjarmason wrote: >> The key thing being the "traversal", i.e. as we walk history we'll >> encounter a tree entry where b.txt was deleted, and see that it was >> moved from a.txt. > > Thanks, I didn't know "reverse" would change the traversal order. When > I looked for "--reverse" option in git-log(1), this what I found: > > --reverse > Output the commits chosen to be shown (see Commit Limiting > section above) in reverse order. Cannot be combined with > --walk-reflogs. > > From this, I inferred that "--follow" would choose the commits and > "--reverse" reverses those commits order. Can we improve the wording > here? Especially, about "reverse" changes the traversing order.
Yes, definitely. Suggestions most welcome :)
Show 45 quoted lines
>> However, if we walk history from the beginning we have no idea of the
>> relationship of a->b.txt, since we didn't encounter that commit yet,
>> that's only something we see while walking the history.
>
> Not showing commits before rename is expected, but I didn't understand
> why combination "--follow" and "--reverse" option showing me only one
> commit? And it always points to the rename of the file. Shouldn't it
> also list other commits which changes that file? For example, just
> after "rename of a.txt to b.txt", do some changes in b.txt file and
> then run "git log --follow --reverse -- b.txt" command.
>
> $ for i in {1..2}; do echo "$i" >> b.txt; git add b.txt; git commit -m
> "Update$i b.txt"; done
> $ git log --follow --reverse -- b.txt
> commit 55e3e6857755fe815449e787a90fe82feb174817
> Author: Redacted <Redacted>
> Date: Fri Nov 5 06:56:58 2021 +0530
>
> Rename a.txt to b.txt
>
> Here I expect output to be:
>
> $ git log --follow --reverse -- b.txt
> commit 55e3e6857755fe815449e787a90fe82feb174817
> Author: Reacted <Redacted>
> Date: Fri Nov 5 06:56:58 2021 +0530
>
> Rename a.txt to b.txt
>
> commit 57aac6d1af2d869557991e714932847f37035d19
> Author: Redacted <Redacted>
> Date: Sun Nov 7 20:30:32 2021 +0530
>
> Update1 b.txt
>
> commit ea76a8e8af903dc1522626aa058b8058afbe11f4
> Author: Redacted <Redacted>
> Date: Sun Nov 7 20:30:32 2021 +0530
>
> Update2 b.txt
>
> I know, here using "--follow" along with "--reverse" doesn't make any
> sense. Instead we should use "git log --reverse -- b.txt". But I'm
> just curious, is this also an expected caveats of using "--follow"
> along with "--reverse"?I just assumed this would work, but looking a bit closer it doesn't
really, a better test-case:
(
rm -rf /tmp/gt &&
git init /tmp/gt &&
cd /tmp/gt &&
echo hi >a.txt &&
git add a.txt &&
git commit -m"initial" &&
for i in {b..z}
do
git mv * $i.txt &&
git commit -m"Moved to $i.txt"
done
)And if you want to dig the ad-hoc fprintf debugging below is probably a good start.
I.e. I think we should do this in principle, but I think we trip over
ourselves in the commit parent discovery, i.e. we should probably fake
up the "parent" as the next commit for the purposes of the traversal &
filter options.
Show 20 quoted lines
>> This caveat doesn't only apply to reverse, try to apply a move of b.txt >> on top of your history: >> b.txt -> c.txt >> And now do: >> git log [--follow] -- b.txt >> What should we output there? If we're arguing that we should first >> traverse the history to "look forward" that'll also apply to a >> non-reverse walk, since we're asking to follow b.txt. >> But we haven't encountered the b->c.txt relationship yet (well, we >> run >> into the rename commit, but once you add a c->d.txt on top...). So maybe >> instead of --buffer-then-reverse we'd need a hypothetical --two-pass, >> which would also impact options other than --reverse whose behavior >> relies on traversal order. > > "--two-pass" option sounds like a good idea, but not sure how useful > it would be for others. In my case, I could read the log's command > output in bottom to top fashion, and now I also know two other > approaches to get what I wanted. And I usually don't track deleted > file.
I think it would be useful to be able to do "I know this file was renamed to i.txt at some point, what happened after that?" If we start at the tip we'll always traverse all the way to the root.
diff --git a/log-tree.c b/log-tree.c index 644893fd8cf..b3894c995bd 100644 --- a/log-tree.c +++ b/log-tree.c @@ -960,6 +960,8 @@ static int log_tree_diff(struct rev_info *opt, struct commit *commit, struct log /* Set up the log info for the next parent, if any.. */ parents = parents->next; + fprintf(stderr, "log_tree_diff() parent: %s (parents?: %d) (showed_log?: %d)\n", + oid_to_hex(&parent->object.oid), !!parents, showed_log); if (!parents || opt->first_parent_merges) break; log->parent = parents->item; diff --git a/tree-diff.c b/tree-diff.c index 437c98a70e4..eeb7af0a516 100644 --- a/tree-diff.c +++ b/tree-diff.c @@ -588,6 +588,10 @@ static void try_to_follow_renames(const struct object_id *old_oid, struct diff_filepair *choice; int i; + fprintf(stderr, "try_to_follow_renames(): %s -> %s\n", + old_oid ? oid_to_hex(old_oid) : "NULL", + new_oid ? oid_to_hex(new_oid) : "NULL"); + /* * follow-rename code is very specific, we need exactly one * path. Magic that matches more than one path is not @@ -633,6 +637,7 @@ static void try_to_follow_renames(const struct object_id *old_oid, * diff_queued_diff, we will also use that as the path in * the future! */ + fprintf(stderr, "%c: for p->one->path = %s...", p->status, p->one->path); if ((p->status == 'R' || p->status == 'C') && !strcmp(p->two->path, opt->pathspec.items[0].match)) { const char *path[2]; @@ -657,9 +662,11 @@ static void try_to_follow_renames(const struct object_id *old_oid, * ourselves; signal diffcore_std() not to muck with * rename information. */ + fprintf(stderr, "found\n"); opt->found_follow = 1; break; } + fprintf(stderr, "NOT found \n"); } /* @@ -704,6 +711,10 @@ void diff_tree_oid(const struct object_id *old_oid, { struct strbuf base; + fprintf(stderr, "diff_tree_oid() %s -> %s\n", + old_oid ? oid_to_hex(old_oid) : "NULL", + new_oid ? oid_to_hex(new_oid) : "NULL"); + strbuf_init(&base, PATH_MAX); strbuf_addstr(&base, base_str);