Re: [PATCH v3] add git-p4.fallbackEncoding config setting, to prevent git-p4 from crashing on non UTF-8 changeset descriptions

From: Torsten Bögershausen <tboegi@web.de>
Date: Apr 22, 2021, 15:50 UTC
Message-ID: <20210422155047.3unltvv3mh5uq7wp@tb-raspi4>
In-Reply-To: <20210422050504.441-1-tzadik.vanderhoof@gmail.com>

On Wed, Apr 21, 2021 at 10:05:04PM -0700, Tzadik Vanderhoof wrote:

Thanks for V3, please see some comments inline.

Show 13 quoted lines

> When git-p4 reads the output from a p4 command, it assumes it will be
> 100% UTF-8. If even one character in the output of one p4 command is
> not UTF-8, git-p4 crashes with:
>
> File "C:/Program Files/Git/bin/git-p4.py", line 774, in p4CmdList
>     value = value.decode() UnicodeDecodeError: 'utf-8' codec can't
> decode byte Ox93 in position 42: invalid start byte
>
> This is especially a problem on the "git p4 clone ... @all" command,
> where git-p4 needs to read thousands of changeset descriptions, one of
> which may have a stray smart quote, causing the whole clone operation
> to fail.
>

> This pull request adds a new config setting, allowing git-p4 to try
> another encoding (for example, "cp1252") and/or use the Unicode replacement
> character, to prevent the whole program from crashing on such a minor problem.

"This pull request" is somewhat superflous wording. How about:

Add a new config setting, allowing git-p4 to try a fallback encoding (for example, "cp1252") and/or use the Unicode replacement character, to prevent the whole program from crashing on such a minor problem.

Documentation is good (and needed, and neccessary). Probably this is then not needed:

> See the documentation included in the patch for more details of how
> the new config setting works.

Show 22 quoted lines

>
> Signed-off-by: Tzadik Vanderhoof <tzadik.vanderhoof@gmail.com>
> ---
>  Documentation/git-p4.txt                   | 10 ++++
>  git-p4.py                                  | 11 +++-
>  t/t9835-git-p4-config-fallback-encoding.sh | 65 ++++++++++++++++++++++
>  3 files changed, 85 insertions(+), 1 deletion(-)
>  create mode 100755 t/t9835-git-p4-config-fallback-encoding.sh
>
> diff --git a/Documentation/git-p4.txt b/Documentation/git-p4.txt
> index f89e68b..e0131a9 100644
> --- a/Documentation/git-p4.txt
> +++ b/Documentation/git-p4.txt
> @@ -638,6 +638,16 @@ git-p4.pathEncoding::
>  	to transcode the paths to UTF-8. As an example, Perforce on Windows
>  	often uses "cp1252" to encode path names.
>
> +git-p4.fallbackEncoding::
> +	Perforce changeset descriptions can be in a mixture of encodings.
> +	Git-p4 first tries to interpret each description as UTF-8. If that
> +	fails, this config allows another encoding to be tried. You
> +	can specify, for example, "cp1252".

That looks OK according to https://docs.python.org/3/library/codecs.html#standard-encodings

Show 6 quoted lines

> + If instead of an encoding,
> +	you specify "replace", UTF-8 will be used, with invalid UTF-8
> +	characters replaced by the Unicode replacement character. If you
> +	specify "none" (the default), there is no fallback, and any non
> +	UTF-8 character will cause git-p4 to immediately fail.
> +

May be, that is a matter of taste:

Show 5 quoted lines

> + If git-p4.fallbackEncoding is "replace" ", UTF-8 will be used, with invalid UTF-8
> +	characters replaced by the Unicode replacement character.
> +	The default is "none": there is no fallback, and any non
> +	UTF-8 character will cause git-p4 to immediately fail.
> +

Show 44 quoted lines

>  git-p4.largeFileSystem::
>  	Specify the system that is used for large (binary) files. Please note
>  	that large file systems do not support the 'git p4 submit' command.
> diff --git a/git-p4.py b/git-p4.py
> index 09c9e93..3364287 100755
> --- a/git-p4.py
> +++ b/git-p4.py
> @@ -771,7 +771,16 @@ def p4CmdList(cmd, stdin=None, stdin_mode='w+b', cb=None, skip_info=False,
>                  for key, value in entry.items():
>                      key = key.decode()
>                      if isinstance(value, bytes) and not (key in ('data', 'path', 'clientFile') or key.startswith('depotFile')):
> -                        value = value.decode()
> +                        try:
> +                            value = value.decode()
> +                        except UnicodeDecodeError as ex:
> +                            fallbackEncoding = gitConfig("git-p4.fallbackEncoding").lower() or 'none'
> +                            if fallbackEncoding == 'none':
> +                                raise Exception("UTF8 decoding failed. Consider using git config git-p4.fallbackEncoding")
> +                            elif fallbackEncoding == 'replace':
> +                                value = value.decode(errors='replace')
> +                            else:
> +                                value = value.decode(encoding=fallbackEncoding)
>                      decoded_entry[key] = value
>                  # Parse out data if it's an error response
>                  if decoded_entry.get('code') == 'error' and 'data' in decoded_entry:
> diff --git a/t/t9835-git-p4-config-fallback-encoding.sh b/t/t9835-git-p4-config-fallback-encoding.sh
> new file mode 100755
> index 0000000..56a245e
> --- /dev/null
> +++ b/t/t9835-git-p4-config-fallback-encoding.sh
> @@ -0,0 +1,65 @@
> +#!/bin/sh
> +
> +test_description='test git-p4.fallbackEncoding config'
> +
> +GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
> +export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
> +
> +. ./lib-git-p4.sh
> +
> +if test_have_prereq !MINGW,!CYGWIN; then
> +	skip_all='This system is not subject to encoding failures in "git p4 clone"'
> +	test_done
> +fi

Out of curiosity: Why are Windows versions (MINGW, CYGWIN) excluded ?

Show 17 quoted lines

> +
> +test_expect_success 'start p4d' '
> +	start_p4d
> +'
> +
> +test_expect_success 'add cp1252 description' '
> +	cd "$cli" &&
> +	echo file1 >file1 &&
> +	p4 add file1 &&
> +	p4 submit -d documentación
> +'
> +
> +test_expect_success 'clone fails with git-p4.fallbackEncoding unset' '
> +	test_might_fail git config --global --unset git-p4.fallbackEncoding &&
> +	test_when_finished cleanup_git &&
> +	(
> +		test_must_fail git p4 clone --dest="$git" //depot@all 2>> actual &&

Should this be >actual ? And please no ' ' between the '>' and the filename.

Show 8 quoted lines

> +		grep "UTF8 decoding failed. Consider using git config git-p4.fallbackEncoding" actual
> +	)
> +'
> +test_expect_success 'clone fails with git-p4.fallbackEncoding set to "none"' '
> +	git config --global git-p4.fallbackEncoding none &&
> +	test_when_finished cleanup_git &&
> +	(
> +		test_must_fail git p4 clone --dest="$git" //depot@all 2>> actual &&

Same here 2 >actual

Show 12 quoted lines

> +		grep "UTF8 decoding failed. Consider using git config git-p4.fallbackEncoding" actual
> +	)
> +'
> +
> +test_expect_success 'clone succeeds with git-p4.fallbackEncoding set to "cp1252"' '
> +	git config --global git-p4.fallbackEncoding cp1252 &&
> +	test_when_finished cleanup_git &&
> +	(
> +		git p4 clone --dest="$git" //depot@all &&
> +		cd "$git" &&
> +		git log --oneline >log &&
> +		desc=$(head -1 log | awk '\''{print $2}'\'') &&	[ "$desc" = "documentación" ]

Style nit: See Documentation/CodingGuidelines: - We prefer "test" over "[ ... ]".

desc=$(head -1 log | awk '\''{print $2}'\'') &&	test "$desc" = "documentación"

Show 18 quoted lines

> +	)
> +'
> +
> +test_expect_success 'clone succeeds with git-p4.fallbackEncoding set to "replace"' '
> +	git config --global git-p4.fallbackEncoding replace &&
> +	test_when_finished cleanup_git &&
> +	(
> +		git p4 clone --dest="$git" //depot@all &&
> +		cd "$git" &&
> +		git log --oneline >log &&
> +		desc=$(head -1 log | awk '\''{print $2}'\'') &&	[ "$desc" = "documentaci�n" ]
> +	)
> +'
> +
> +test_done
> --
> 2.31.1.windows.1
>

Are there any more comments from the p4 experts ?