git/list[1] front-page[2] threads[3] people[4] search[5] about
 

[PATCH v6 09/10] submodule: support reading .gitmodules when it's not in the working tree

From
Antonio Ospite <ao2@ao2.it>
Date
Oct 5, 2018, 13:06 UTC
Message-ID
<20181005130601.15879-10-ao2@ao2.it>
In-Reply-To
<20181005130601.15879-1-ao2@ao2.it>

When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout.

This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree.

Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently.

Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed).

Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules().

Finally, add t7416-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out.

NOTE: there is one rare case where this new feature does not work
properly yet: nested submodules without .gitmodules in their working
tree.  This has been documented with a warning and a test_expect_failure
item in t7814, and in this case the current behavior is not altered: no
config is read.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
---
 builtin/grep.c                         | 17 +++++-
 builtin/submodule--helper.c            |  6 +-
 git-submodule.sh                       |  5 ++
 submodule-config.c                     | 31 +++++++++-
 t/t7411-submodule-config.sh            | 26 ++++++++-
 t/t7416-submodule-sparse-gitmodules.sh | 78 ++++++++++++++++++++++++++
 t/t7814-grep-recurse-submodules.sh     | 16 ++++++
 7 files changed, 172 insertions(+), 7 deletions(-)
 create mode 100755 t/t7416-submodule-sparse-gitmodules.sh
diff --git a/builtin/grep.c b/builtin/grep.c
index 601f801158..7da8fef31a 100644
--- a/builtin/grep.c
+++ b/builtin/grep.c
@@ -421,11 +421,23 @@ static int grep_submodule(struct grep_opt *opt, struct repository *superproject,
 	struct repository submodule;
 	int hit;
 
-	if (!is_submodule_active(superproject, path))
+	/*
+	 * NEEDSWORK: submodules functions need to be protected because they
+	 * access the object store via config_from_gitmodules(): the latter
+	 * uses get_oid() which, for now, relies on the global the_repository
+	 * object.
+	 */
+	grep_read_lock();
+
+	if (!is_submodule_active(superproject, path)) {
+		grep_read_unlock();
 		return 0;
+	}
 
-	if (repo_submodule_init(&submodule, superproject, path))
+	if (repo_submodule_init(&submodule, superproject, path)) {
+		grep_read_unlock();
 		return 0;
+	}
 
 	repo_read_gitmodules(&submodule);
 
@@ -439,7 +451,6 @@ static int grep_submodule(struct grep_opt *opt, struct repository *superproject,
 	 * store is no longer global and instead is a member of the repository
 	 * object.
 	 */
-	grep_read_lock();
 	add_to_alternates_memory(submodule.objects->objectdir);
 	grep_read_unlock();
 
diff --git a/builtin/submodule--helper.c b/builtin/submodule--helper.c
index 28f3ccca6d..5f8a804a6e 100644
--- a/builtin/submodule--helper.c
+++ b/builtin/submodule--helper.c
@@ -2154,8 +2154,12 @@ static int module_config(int argc, const char **argv, const char *prefix)
 		return print_config_from_gitmodules(the_repository, argv[1]);
 
 	/* Equivalent to ACTION_SET in builtin/config.c */
-	if (argc == 3)
+	if (argc == 3) {
+		if (!is_writing_gitmodules_ok())
+			die(_("please make sure that the .gitmodules file is in the working tree"));
+
 		return config_set_in_gitmodules_file_gently(argv[1], argv[2]);
+	}
 
 	usage_with_options(git_submodule_helper_usage, module_config_options);
 }
diff --git a/git-submodule.sh b/git-submodule.sh
index 0805fadf47..f5124bbf23 100755
--- a/git-submodule.sh
+++ b/git-submodule.sh
@@ -159,6 +159,11 @@ cmd_add()
 		shift
 	done
 
+	if ! git submodule--helper config --check-writeable >/dev/null 2>&1
+	then
+		 die "$(eval_gettext "please make sure that the .gitmodules file is in the working tree")"
+	fi
+
 	if test -n "$reference_path"
 	then
 		is_absolute_path "$reference_path" ||
diff --git a/submodule-config.c b/submodule-config.c
index 8659d97e06..69bebb721e 100644
--- a/submodule-config.c
+++ b/submodule-config.c
@@ -1,4 +1,5 @@
 #include "cache.h"
+#include "dir.h"
 #include "repository.h"
 #include "config.h"
 #include "submodule-config.h"
@@ -603,8 +604,34 @@ static void submodule_cache_check_init(struct repository *repo)
 static void config_from_gitmodules(config_fn_t fn, struct repository *repo, void *data)
 {
 	if (repo->worktree) {
-		char *file = repo_worktree_path(repo, GITMODULES_FILE);
-		git_config_from_file(fn, file, data);
+		struct git_config_source config_source = { 0 };
+		const struct config_options opts = { 0 };
+		struct object_id oid;
+		char *file;
+
+		file = repo_worktree_path(repo, GITMODULES_FILE);
+		if (file_exists(file)) {
+			config_source.file = file;
+		} else if (repo->submodule_prefix) {
+			/*
+			 * When get_oid and config_with_options, used below,
+			 * become able to work on a specific repository, this
+			 * warning branch can be removed.
+			 */
+			warning("nested submodules without %s in the working tree are not supported yet",
+				GITMODULES_FILE);
+			goto out;
+		} else if (get_oid(GITMODULES_INDEX, &oid) >= 0) {
+			config_source.blob = GITMODULES_INDEX;
+		} else if (get_oid(GITMODULES_HEAD, &oid) >= 0) {
+			config_source.blob = GITMODULES_HEAD;
+		} else {
+			goto out;
+		}
+
+		config_with_options(fn, data, &config_source, &opts);
+
+out:
 		free(file);
 	}
 }
diff --git a/t/t7411-submodule-config.sh b/t/t7411-submodule-config.sh
index 45953f9300..2cfabb18bc 100755
--- a/t/t7411-submodule-config.sh
+++ b/t/t7411-submodule-config.sh
@@ -134,7 +134,7 @@ test_expect_success 'error in history in fetchrecursesubmodule lets continue' '
 	)
 '
 
-test_expect_success 'reading submodules config with "submodule--helper config"' '
+test_expect_success 'reading submodules config from the working tree with "submodule--helper config"' '
 	(cd super &&
 		echo "../submodule" >expect &&
 		git submodule--helper config submodule.submodule.url >actual &&
@@ -192,4 +192,28 @@ test_expect_success 'non-writeable .gitmodules when it is in the current branch
 	)
 '
 
+test_expect_success 'reading submodules config from the index when .gitmodules is not in the working tree' '
+	ORIG=$(git -C super rev-parse HEAD) &&
+	test_when_finished "git -C super reset --hard $ORIG" &&
+	(cd super &&
+		git submodule--helper config submodule.submodule.url "staged_url" &&
+		git add .gitmodules &&
+		rm -f .gitmodules &&
+		echo "staged_url" >expect &&
+		git submodule--helper config submodule.submodule.url >actual &&
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'reading submodules config from the current branch when .gitmodules is not in the index' '
+	ORIG=$(git -C super rev-parse HEAD) &&
+	test_when_finished "git -C super reset --hard $ORIG" &&
+	(cd super &&
+		git rm .gitmodules &&
+		echo "../submodule" >expect &&
+		git submodule--helper config submodule.submodule.url >actual &&
+		test_cmp expect actual
+	)
+'
+
 test_done
diff --git a/t/t7416-submodule-sparse-gitmodules.sh b/t/t7416-submodule-sparse-gitmodules.sh
new file mode 100755
index 0000000000..908a4e6958
--- /dev/null
+++ b/t/t7416-submodule-sparse-gitmodules.sh
@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# Copyright (C) 2018  Antonio Ospite <ao2@ao2.it>
+#
+
+test_description='Test reading/writing .gitmodules when not in the working tree
+
+This test verifies that, when .gitmodules is in the current branch but is not
+in the working tree reading from it still works but writing to it does not.
+
+The test setup uses a sparse checkout, however the same scenario can be set up
+also by committing .gitmodules and then just removing it from the filesystem.
+'
+
+. ./test-lib.sh
+
+test_expect_success 'sparse checkout setup which hides .gitmodules' '
+	echo file >file &&
+	git add file &&
+	test_tick &&
+	git commit -m upstream &&
+	git clone . super &&
+	git clone super submodule &&
+	git clone super new_submodule &&
+	(cd super &&
+		git submodule add ../submodule &&
+		test_tick &&
+		git commit -m submodule &&
+		cat >.git/info/sparse-checkout <<-\EOF &&
+		/*
+		!/.gitmodules
+		EOF
+		git config core.sparsecheckout true &&
+		git read-tree -m -u HEAD &&
+		test_path_is_missing .gitmodules
+	)
+'
+
+test_expect_success 'reading gitmodules config file when it is not checked out' '
+	(cd super &&
+		echo "../submodule" >expect &&
+		git submodule--helper config submodule.submodule.url >actual &&
+		test_cmp expect actual
+	)
+'
+
+test_expect_success 'not writing gitmodules config file when it is not checked out' '
+	 test_must_fail git -C super submodule--helper config submodule.submodule.url newurl
+'
+
+test_expect_success 'initialising submodule when the gitmodules config is not checked out' '
+	git -C super submodule init
+'
+
+test_expect_success 'showing submodule summary when the gitmodules config is not checked out' '
+	git -C super submodule summary
+'
+
+test_expect_success 'updating submodule when the gitmodules config is not checked out' '
+	(cd submodule &&
+		echo file2 >file2 &&
+		git add file2 &&
+		git commit -m "add file2 to submodule"
+	) &&
+	git -C super submodule update
+'
+
+test_expect_success 'not adding submodules when the gitmodules config is not checked out' '
+	test_must_fail git -C super submodule add ../new_submodule
+'
+
+# This test checks that the previous "git submodule add" did not leave the
+# repository in a spurious state when it failed.
+test_expect_success 'init submodule still works even after the previous add failed' '
+	git -C super submodule init
+'
+
+test_done
diff --git a/t/t7814-grep-recurse-submodules.sh b/t/t7814-grep-recurse-submodules.sh
index 7184113b9b..fa475d52fa 100755
--- a/t/t7814-grep-recurse-submodules.sh
+++ b/t/t7814-grep-recurse-submodules.sh
@@ -380,4 +380,20 @@ test_expect_success 'grep --recurse-submodules should pass the pattern type alon
 	fi
 '
 
+# Recursing down into nested submodules which do not have .gitmodules in their
+# working tree does not work yet. This is because config_from_gitmodules()
+# uses get_oid() and the latter is still not able to get objects from an
+# arbitrary repository (the nested submodule, in this case).
+test_expect_failure 'grep --recurse-submodules with submodules without .gitmodules in the working tree' '
+	test_when_finished "git -C submodule checkout .gitmodules" &&
+	rm submodule/.gitmodules &&
+	git grep --recurse-submodules -e "(.|.)[\d]" >actual &&
+	cat >expect <<-\EOF &&
+	a:(1|2)d(3|4)
+	submodule/a:(1|2)d(3|4)
+	submodule/sub/a:(1|2)d(3|4)
+	EOF
+	test_cmp expect actual
+'
+
 test_done

-- 
2.19.0
Previous: Antonio OspiteNext: Stefan Beller
Message 3 of 23 in “Make submodules work if .gitmodules is not checked out”
  1. 00/10 Make submodules work if .gitmodules is not checked outAntonio Ospite, Oct 5, 2018
  2. 03/10 t7411: merge tests 5 and 6Antonio Ospite, Oct 5, 2018
  3. 09/10 submodule: support reading .gitmodules when it's not in the working treeAntonio Ospite, Oct 5, 2018
  4. Stefan BellerOct 8, 2018
  5. Antonio OspiteOct 10, 2018
  6. Stefan BellerOct 10, 2018
  7. Junio C HamanoOct 9, 2018
  8. Junio C HamanoOct 9, 2018
  9. 04/10 t7411: be nicer to future tests and really clean things upAntonio Ospite, Oct 5, 2018
  10. 10/10 t/helper: add test-submodule-nested-repo-configAntonio Ospite, Oct 5, 2018
  11. 02/10 submodule: factor out a config_set_in_gitmodules_file_gently functionAntonio Ospite, Oct 5, 2018
  12. 01/10 submodule: add a print_config_from_gitmodules() helperAntonio Ospite, Oct 5, 2018
  13. 06/10 submodule: use the 'submodule--helper config' commandAntonio Ospite, Oct 5, 2018
  14. 05/10 submodule--helper: add a new 'config' subcommandAntonio Ospite, Oct 5, 2018
  15. 08/10 submodule: add a helper to check if it is safe to write to .gitmodulesAntonio Ospite, Oct 5, 2018
  16. Stefan BellerOct 5, 2018
  17. Antonio OspiteOct 6, 2018
  18. Junio C HamanoOct 6, 2018
  19. Antonio OspiteOct 8, 2018
  20. 07/10 t7506: clean up .gitmodules properly before setting up new scenarioAntonio Ospite, Oct 5, 2018
  21. Antonio OspiteOct 6, 2018
  22. Junio C HamanoOct 25, 2018
  23. Antonio OspiteOct 25, 2018

Read the whole thread, see it on lore, or plain text.

$ cat FOOTERMessages come from the public archive at lore.kernel.org/git, fetched every hour. The front page is chosen and written each morning by an AI editor and can be wrong; the threads themselves are the record. About and API. For agents: an MCP server at https://gitlist.dev/mcp, and any thread, story or person page as Markdown by adding .md to its URL (or sending Accept: text/markdown). Details in /llms.txt.