Re: [PATCH 7/9] update-index: add tests for sparse-checkout compatibility

> On Tue, Jan 4, 2022 at 9:37 AM Victoria Dye via GitGitGadget
> <gitgitgadget@gmail.com> wrote:
>>
>> From: Victoria Dye <vdye@github.com>
>>
>> Introduce tests for a variety of `git update-index` use cases, including
>> performance scenarios.
> 
> Makes sense.
> 
>> Tests for `update-index add/remove` are specifically
>> focused on how `git stash` uses `git update-index` as a subcommand to
>> prepare for sparse index integration with `stash` in a future series.
> 
> This is possibly a tangent, but I'd rather that if we were trying to
> fix `git stash`, that we instead would do so by making it stop forking
> subprocesses and having it call internal API instead.  See for
> example, a4031f6dc0 ("Merge branch 'en/stash-apply-sparse-checkout'
> into maint", 2021-02-05) which did this.  The fact that it forks so
> many subprocesses is a bug, and comes from the fact that stash is a
> partial conversion from shell to C.  I think the subprocess forking is
> part of the problem that causes issues for sparse-checkouts, as I
> spelled out in patches 2 & 3 of the series I mentioned above.
> 
> However, that doesn't affect this series.
> 
>> Co-authored-by: Derrick Stolee <dstolee@microsoft.com>
>> Signed-off-by: Victoria Dye <vdye@github.com>
>> ---
>>  t/perf/p2000-sparse-operations.sh        |   1 +
>>  t/t1092-sparse-checkout-compatibility.sh | 125 +++++++++++++++++++++++
>>  2 files changed, 126 insertions(+)
>>
>> diff --git a/t/perf/p2000-sparse-operations.sh b/t/perf/p2000-sparse-operations.sh
>> index 54f8602f3c1..7dbed330160 100755
>> --- a/t/perf/p2000-sparse-operations.sh
>> +++ b/t/perf/p2000-sparse-operations.sh
>> @@ -118,5 +118,6 @@ test_perf_on_all git diff --cached
>>  test_perf_on_all git blame $SPARSE_CONE/a
>>  test_perf_on_all git blame $SPARSE_CONE/f3/a
>>  test_perf_on_all git checkout-index -f --all
>> +test_perf_on_all git update-index --add --remove
>>
>>  test_done
>> diff --git a/t/t1092-sparse-checkout-compatibility.sh b/t/t1092-sparse-checkout-compatibility.sh
>> index 6ecf1f2bf8e..6804ab23a27 100755
>> --- a/t/t1092-sparse-checkout-compatibility.sh
>> +++ b/t/t1092-sparse-checkout-compatibility.sh
>> @@ -630,6 +630,131 @@ test_expect_success 'reset with wildcard pathspec' '
>>         test_all_match git ls-files -s -- folder1
>>  '
>>
>> +test_expect_success 'update-index modify outside sparse definition' '
>> +       init_repos &&
>> +
>> +       write_script edit-contents <<-\EOF &&
>> +       echo text >>$1
>> +       EOF
>> +
>> +       # Create & modify folder1/a
>> +       run_on_sparse mkdir -p folder1 &&
>> +       run_on_sparse cp ../initial-repo/folder1/a folder1/a &&
>> +       run_on_all ../edit-contents folder1/a &&
> 
> As I've mentioned to Stolee, I'd rather these were explicitly marked
> as intentionally setting up an erroneous condition.
> 
> However, that might not matter if my other series gets accepted (the
> one I promised to send out yesterday, but then spent all day
> responding to emails instead).  Hopefully I'll send it soon.
> 
>> +
>> +       # If file has skip-worktree enabled, update-index does not modify the
>> +       # index entry
>> +       test_sparse_match git update-index folder1/a &&
>> +       test_sparse_match git status --porcelain=v2 &&
>> +       test_must_be_empty sparse-checkout-out &&
>> +
>> +       # When skip-worktree is disabled (even on files outside sparse cone), file
>> +       # is updated in the index
>> +       test_sparse_match git update-index --no-skip-worktree folder1/a &&
>> +       test_all_match git status --porcelain=v2 &&
>> +       test_all_match git update-index folder1/a &&
>> +       test_all_match git status --porcelain=v2
> 
> These make sense.
> 
>> +'
>> +
>> +test_expect_success 'update-index --add outside sparse definition' '
>> +       init_repos &&
>> +
>> +       write_script edit-contents <<-\EOF &&
>> +       echo text >>$1
>> +       EOF
>> +
>> +       # Create folder1, add new file
>> +       run_on_sparse mkdir -p folder1 &&
>> +       run_on_all ../edit-contents folder1/b &&
>> +
>> +       # Similar to `git add`, the untracked out-of-cone file is added to the index
>> +       # identically across sparse and non-sparse checkouts
>> +       test_all_match git update-index --add folder1/b &&
>> +       test_all_match git status --porcelain=v2
> 
> The comment is not correct:
> 

> $ git add out-of-cone/file
> The following paths and/or pathspecs matched paths that exist
> outside of your sparse-checkout definition, so will not be
> updated in the index:
> out-of-cone/file
> hint: If you intend to update such entries, try one of the following:
> hint: * Use the --sparse option.
> hint: * Disable or modify the sparsity rules.
> hint: Disable this message with "git config advice.updateSparsePath false"
> 
> I might buy that `git update-index` is lower level and should be
> considered the same as `git add --sparse`, but the comment should
> mention that and try to sell why update-index should be equivalent to
> that instead of to `git add`.
> 

>> +'
>> +
>> +test_expect_success 'update-index --remove outside sparse definition' '
>> +       init_repos &&
> 
>> +
>> +       # When `--ignore-skip-worktree-entries` is specified, out-of-cone files are
>> +       # not removed from the index if they do not exist on disk
>> +       test_sparse_match git update-index --remove --ignore-skip-worktree-entries folder1/a &&
>> +       test_all_match git status --porcelain=v2 &&
> 
> The file is present despite being marked to be missing, we're ignoring
> the intention of the marking, and we ask for it to be removed, so we
> don't remove it?
> 
> The levels of negation are _very_ confusing.  It took me a while to
> unravel this.  I think the logic is something like this
>   * folder1/a is marked as SKIP_WORKTREE, meaning it's not supposed to
> be in the worktree.
>   * and it's not.
>   * We are stating that we're ignoring SKIP_WORKTREE, though, so this
> looks like a regular file that has been deleted.
> So, what would `git update-index --remove $FILE` do for a normal $FILE
> deleted from the working copy?  According to the docs:
> 
>     --remove
>            If a specified file is in the index but is missing then it’s
>            removed. Default behavior is to ignore removed file.
> 
> So, the docs say it would remove it.  But you don't.
> 
> 
> After digging around and looking at the testcase below, if I had to
> guess what happened, I would say that you figured out what the
> SKIP_WORKTREE behavior was, and assumed that was correct, and added a
> flag that allowed you to request the opposite behavior.
> Unfortunately, I think the pre-existing behavior is buggy.
> 

> Of course, there's lots of negation here.  Did I get something
> backwards by chance?
> 
>> +
>> +       # When the flag is _not_ specified ...
> 
> In my head I'm translating this as:
> 
> SKIP_WORKTREE = !worktree
> --ignore-skip-worktree-entries = !!worktree
> "flag is _not_ specified" = !!!worktree ?
> 
> I'm not sure I would do anything to change it, but just pointing out
> it can be a little hard for others to come up to speed.
> 

>>             ...     , out-of-cone, not-on-disk files are
>> +       # removed from the index
>> +       rm full-checkout/folder1/a &&
>> +       test_all_match git update-index --remove folder1/a &&
>> +       test_all_match git status --porcelain=v2 &&
> 
> Documentation/git-update-index.txt defines SKIP_WORKTREE as follows:
> 
> "Skip-worktree bit can be defined in one (long) sentence: When reading
> an entry, if it is marked as skip-worktree, then Git pretends its
> working directory version is up to date and read the index version
> instead."
> 
> If Git is pretending the file is up-to-date, and `git update-index
> --remove $UP_TO_DATE_FILE` is typically a no-op because the --remove
> flag doesn't do anything when a file is present in the working copy,
> then why is this the expected behavior?
> 
> I know it's the traditional behavior of update-index, but
> SKIP_WORKTREE support in Git has traditionally been filled with holes.
> So, was this behavior by design (despite contradicting the
> documentation), or by accident?
> 

> (To be fair, I think the definition given in the manual for
> SKIP_WORKTREE is horrible for other reasons, so I don't like leaning
> on it.  But I used different logic above in the
> --ignore-skip-worktree-entries case to arrive at the same conclusion
> that the --remove behavior of update-index seems to be backwards.
> Unless I missed a negation in both cases somewhere?  There are so many
> floating around...)
> 
>> +       # NOTE: --force-remove supercedes --ignore-skip-worktree-entries, removing
>> +       # a skip-worktree file from the index (and disk) when both are specified
>> +       test_all_match git update-index --force-remove --ignore-skip-worktree-entries folder1/a &&
>> +       test_all_match git status --porcelain=v2
> 
> Makes sense.
> 
>> +'
>> +
>> +test_expect_success 'update-index with directories' '
>> +       init_repos &&
>> +
>> +       # update-index will exit silently when provided with a directory name
>> +       # containing a trailing slash
>> +       test_all_match git update-index deep/ folder1/ &&
>> +       grep "Ignoring path deep/" sparse-checkout-err &&
>> +       grep "Ignoring path folder1/" sparse-checkout-err &&
> 
> Is this desired behavior or just current behavior?
> 
>> +
>> +       # When update-index is given a directory name WITHOUT a trailing slash, it will
>> +       # behave in different ways depending on the status of the directory on disk:
>> +       # * if it exists, the command exits with an error ("add individual files instead")
>> +       # * if it does NOT exist (e.g., in a sparse-checkout), it is assumed to be a
>> +       #   file and either triggers an error ("does not exist  and --remove not passed")
>> +       #   or is ignored completely (when using --remove)
>> +       test_all_match test_must_fail git update-index deep &&
>> +       run_on_all test_must_fail git update-indexe folder1 &&
> 
> This one will fail for the wrong reason, though -- `update-indexe` is
> not a valid subcommand.  (extra 'e' at the end)
> 

>> +       test_must_fail git -C full-checkout update-index --remove folder1 &&
>> +       test_sparse_match git update-index --remove folder1 &&
>> +       test_all_match git status --porcelain=v2
> 
> Otherwise these seem reasonable.
> 
>> +'
>> +
>> +test_expect_success 'update-index --again file outside sparse definition' '
>> +       init_repos &&
>> +
>> +       write_script edit-contents <<-\EOF &&
>> +       echo text >>$1
>> +       EOF
> 
> Copy and paste and forget to remove?  edit-contents doesn't seem to be
> used in this test.
> 

>> +
>> +       test_all_match git checkout -b test-reupdate &&
>> +
>> +       # Update HEAD without modifying the index to introduce a difference in
>> +       # folder1/a
>> +       test_sparse_match git reset --soft update-folder1 &&
>> +
>> +       # Because folder1/a differs in the index vs HEAD,
>> +       # `git update-index --remove --again` will effectively perform
>> +       # `git update-index --remove folder1/a` and remove the folder1/a
>> +       test_sparse_match git update-index --remove --again &&
>> +       test_sparse_match git status --porcelain=v2
> 
> This might need a --ignore-skip-worktree-entries, as per the
> discussion above.  Otherwise, this test makes sense.
> 

>> +'
>> +
>> +test_expect_success 'update-index --cacheinfo' '
>> +       init_repos &&
>> +
>> +       deep_a_oid=$(git -C full-checkout rev-parse update-deep:deep/a) &&
>> +       folder2_oid=$(git -C full-checkout rev-parse update-folder2:folder2) &&
>> +       folder1_a_oid=$(git -C full-checkout rev-parse update-folder1:folder1/a) &&
>> +
>> +       test_all_match git update-index --cacheinfo 100644 $deep_a_oid deep/a &&
>> +       test_all_match git status --porcelain=v2 &&
>> +
>> +       # Cannot add sparse directory, even in sparse index case
>> +       test_all_match test_must_fail git update-index --add --cacheinfo 040000 $folder2_oid folder2/ &&
>> +
>> +       # Sparse match only - because folder1/a is outside the sparse checkout
>> +       # definition (and thus not on-disk), it will appear "deleted" in
>> +       # unstaged changes.
>> +       test_all_match git update-index --add --cacheinfo 100644 $folder1_a_oid folder1/a &&
>> +       test_sparse_match git status --porcelain=v2
> 
> Makes sense, because the update-index command removes the existing
> cache entry and adds a new one without the SKIP_WORKTREE bit.  But it
> might be worth mentioning that in the commit message.  Also, you could
> follow this up with `git update-index --skip-worktree folder1/a`, and
> then do a test_all_match git status --porcelain=v2, to show that when
> the SKIP_WORKTREE bit is restored back to the file, then it again does
> as expected despite not being on-disk.
> 

>> +'
>> +
>>  test_expect_success 'merge, cherry-pick, and rebase' '
>>         init_repos &&
>>
>> --
>> gitgitgadget