threads / patch / 7862

patchA utility to perform merges between Subversion branches using git

Subject: [PATCH] A utility to perform merges between Subversion branches using git

## tl;dr

3 messages between Apr 27, 2007 and Apr 27, 2007. Diffs are folded; open one to read it.

replies: 2people: 2as markdown or json

Steven Grimm· Apr 27, 2007, 00:55 UTC · lore
Signed-off-by: Steven Grimm <koreth@midwinter.com>
---
 contrib/svn/README       |    8 +++
 contrib/svn/git-svnmerge |  139 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 147 insertions(+), 0 deletions(-)
 create mode 100644 contrib/svn/README
 create mode 100755 contrib/svn/git-svnmerge
Show changes to 2 files +147 −0

contrib/svn/README, contrib/svn/git-svnmerge

diff --git a/contrib/svn/README b/contrib/svn/README
new file mode 100644
index 0000000..f3627ab
--- /dev/null
+++ b/contrib/svn/README
@@ -0,0 +1,8 @@
+This directory contains tools useful for a mixed git/Subversion environment.
+They will likely all depend on git-svnimport or git-svn, which are the main
+Subversion bridges in git.
+
+git-svnmerge
+	Use git to make up for svn's lack of merge tracking. This tool lets
+	you merge between Subversion branches in your git-svn repository.
+
diff --git a/contrib/svn/git-svnmerge b/contrib/svn/git-svnmerge
new file mode 100755
index 0000000..e7ed45d
--- /dev/null
+++ b/contrib/svn/git-svnmerge
@@ -0,0 +1,139 @@
+#!/bin/sh
+#
+# Handles svn merges using git-svn.
+#
+# Usage: git-svnmerge [-m commit-message] other-branch-name
+#
+# This script pulls the changes from another svn branch into the current branch
+# and checks the result into svn. Then it updates the grafts file so that the
+# merge is known to git. That means that subsequent runs of the script will
+# automatically know which changes to apply.
+#
+# The user is assumed to have already updated the repository using git-svn.
+#
+# Exit codes:
+#   0 Merge successfully committed to svn.
+#   1 Merge has conflicts that need to be resolved.
+#   2 Encountered an error.
+#
+# Author: Steven Grimm <koreth@midwinter.com>
+#
+
+die() {
+	echo "$@" 1>&2
+	exit 2
+}
+
+store_status() {
+	echo $Status $OldHead $RevToMerge $CommitMessage > "$StatusFile"
+}
+
+while test $# -gt 1; do
+	case "$1" in
+		-m)
+			shift
+			CommitMessage="$1"
+			shift
+			;;
+		*)
+			die "Unknown argument $1"
+	esac
+done
+
+if test $# -lt 1; then
+	die "Usage: $0 [-m commit-message] other-branch-name"
+fi
+
+GitDir="`git rev-parse --git-dir`"
+if test -z "$GitDir"; then
+	die "Not a git repository."
+fi
+StatusFile="$GitDir/svnmerge-status"
+
+# We might be resuming a previous run, so get the old state if any.
+Status="start"
+if test -f "$StatusFile"; then
+	read Status OldHead RevToMerge CommitMessage < "$StatusFile"
+fi
+
+if test "$Status" = "start"; then
+	# Make sure there aren't uncommitted (to svn) changes here.
+	if test -n "`git svn dcommit -n`"; then
+		die "Can't merge to dirty branch"
+	fi
+
+	# Record the revisions we're merging. We'll use them in the
+	# grafts file later.
+	OldHead="`git rev-list --max-count=1 HEAD`"
+	RevToMerge="`git rev-list --max-count=1 $1`"
+	if test -z "$RevToMerge"; then
+		die "Can't merge nonexistent branch."
+	fi
+
+	# Do the actual merge.
+	git merge --squash "$RevToMerge" || \
+		MergeFailed=1
+
+	# Did we actually merge anything?
+	if git status > /dev/null; then
+		:
+	else
+		echo "No changes to merge. Have you fetched from svn?"
+		exit 0
+	fi
+
+	Status=merged
+	store_status
+
+	# If there are conflicts, bail out.
+	if test -n "$MergeFailed`git ls-files -u`"; then
+		echo "Please resolve conflicts and run again to continue."
+		exit 1
+	fi
+fi
+
+if test "$Status" = "merged"; then
+	if test -n "`git ls-files -u`"; then
+		echo "There are still conflicts; can't continue."
+		exit 1
+	fi
+
+	SvnRevision="`git log --pretty=format:%b -n 1 $RevToMerge | \
+			egrep '^git-svn-id:' | \
+			sed 's:.*/\([^/]*\)@\([0-9]*\) [0-9a-f].*:\1 revision \2:'`"
+	echo "$SvnRevision merged. Committing."
+
+	if test -z "$CommitMessage"; then
+		CommitMessage="Merge from $SvnRevision"
+	fi
+
+	git commit -m "$CommitMessage" || \
+		die "Commit failed"
+
+	Status=committed
+	store_status
+fi
+
+# Since git-svn dcommit can fail for reasons having nothing to do with the
+# local repository (e.g. the svn server is down), we allow the user to retry
+# the dcommit by running this command again.
+if test "$Status" = "committed"; then
+	git svn dcommit || \
+		die "Can't commit to Subversion"
+
+	# dcommit will update our current HEAD to point to the newly committed
+	# svn revision. Update grafts file to tell git that it's a merge.
+	NewRevision="`git rev-list --max-count=1 HEAD`"
+	echo "$NewRevision $OldHead $RevToMerge" >> $GitDir/info/grafts
+
+	rm "$StatusFile"
+	echo "Successfully merged $SvnRevision."
+
+	Status=""
+fi
+
+if test -n "$Status"; then
+	die "Unknown status $Status in status file!"
+fi
+
+exit 0

-- 
1.5.2.rc0.35.gf41c8
Junio C Hamano· Apr 27, 2007, 04:30 UTC · re: Steven Grimm · lore

Re: [PATCH] A utility to perform merges between Subversion branches using git

Steven Grimm <koreth@midwinter.com> writes:
Show 26 quoted lines
> diff --git a/contrib/svn/git-svnmerge b/contrib/svn/git-svnmerge
> new file mode 100755
> index 0000000..e7ed45d
> --- /dev/null
> +++ b/contrib/svn/git-svnmerge
> @@ -0,0 +1,139 @@
> +#!/bin/sh
> +#
> +# Handles svn merges using git-svn.
> +#
> +# Usage: git-svnmerge [-m commit-message] other-branch-name
> +#
> +# This script pulls the changes from another svn branch into the current branch
> +# and checks the result into svn. Then it updates the grafts file so that the
> +# merge is known to git. That means that subsequent runs of the script will
> +# automatically know which changes to apply.
> +#
> +# The user is assumed to have already updated the repository using git-svn.
> +#
> +# Exit codes:
> +#   0 Merge successfully committed to svn.
> +#   1 Merge has conflicts that need to be resolved.
> +#   2 Encountered an error.
> +#
> +# Author: Steven Grimm <koreth@midwinter.com>
> +#
This is contrib stuff, so I'll limit the comments mostly to style.
> +
> +die() {
> +	echo "$@" 1>&2
Many of our scripts do redirection at the beginning, like:
	echo >&2 ...
Also omitting 1 when redirecting to stderr is an idiom.
> +	exit 2
> +}

Does exit value 2 have any significance, or just any non-zero value would do?

> +
> +store_status() {
> +	echo $Status $OldHead $RevToMerge $CommitMessage > "$StatusFile"
> +}

We do not seem to do CamelCase on shell variable names. This is minor, as it is mostly taste.

> +
> +while test $# -gt 1; do
        while <<command>>
        do
without semicolon.
> +	case "$1" in
> +		-m)

Align case arms with "case/esac", just like you would do "switch" and "case" in C.

> +		*)
> +			die "Unknown argument $1"
> +	esac

... and do not omit ';;' just like you do not omit "break" in the last case arm in switch in C.

> +done
> +
> +if test $# -lt 1; then
	if <<command>>
        then
without semicolon.
> +	die "Usage: $0 [-m commit-message] other-branch-name"
> +fi
> +
> +GitDir="`git rev-parse --git-dir`"
GIT_DIR?
Show 20 quoted lines
> +if test -z "$GitDir"; then
> +	die "Not a git repository."
> +fi
> +StatusFile="$GitDir/svnmerge-status"
> +
> +# We might be resuming a previous run, so get the old state if any.
> +Status="start"
> +if test -f "$StatusFile"; then
> +	read Status OldHead RevToMerge CommitMessage < "$StatusFile"
> +fi
> +
> +if test "$Status" = "start"; then
> +	# Make sure there aren't uncommitted (to svn) changes here.
> +	if test -n "`git svn dcommit -n`"; then
> +		die "Can't merge to dirty branch"
> +	fi
> +
> +	# Record the revisions we're merging. We'll use them in the
> +	# grafts file later.
> +	OldHead="`git rev-list --max-count=1 HEAD`"
OldHead=`git rev-parse --verify HEAD`
> +	RevToMerge="`git rev-list --max-count=1 $1`"
> +	if test -z "$RevToMerge"; then
> +		die "Can't merge nonexistent branch."
> +	fi

Wouldn't it possible that $1 might have $IFS in it here, would it?

	RevToMerge=`git rev-parse --verify "$1"`

If you are expecting "$1" to be only an existing branch, not just an arbitrary rev, you might want to be more strict by saying:

	RevToMerge=`git show-ref -s refs/heads/"$1"` ||
        die "Can't merge nonexistent branch."
Show 32 quoted lines
> +
> +	# Do the actual merge.
> +	git merge --squash "$RevToMerge" || \
> +		MergeFailed=1
> +
> +	# Did we actually merge anything?
> +	if git status > /dev/null; then
> +		:
> +	else
> +		echo "No changes to merge. Have you fetched from svn?"
> +		exit 0
> +	fi
> +
> +	Status=merged
> +	store_status
> +
> +	# If there are conflicts, bail out.
> +	if test -n "$MergeFailed`git ls-files -u`"; then
> +		echo "Please resolve conflicts and run again to continue."
> +		exit 1
> +	fi
> +fi
> +
> +if test "$Status" = "merged"; then
> +	if test -n "`git ls-files -u`"; then
> +		echo "There are still conflicts; can't continue."
> +		exit 1
> +	fi
> +
> +	SvnRevision="`git log --pretty=format:%b -n 1 $RevToMerge | \
> +			egrep '^git-svn-id:' | \
> +			sed 's:.*/\([^/]*\)@\([0-9]*\) [0-9a-f].*:\1 revision \2:'`"

Piping grep to sed often makes your script look amateurish. How about...

        script='s|^git-svn-id:.*/\([^/]*\)@\([0-9]*\) [0-9a-f].*|\1 revision \2|p'
        git show -s --pretty=format:%b $RevToMerge |
        sed -n -e "$script"
Show 24 quoted lines
> +	echo "$SvnRevision merged. Committing."
> +
> +	if test -z "$CommitMessage"; then
> +		CommitMessage="Merge from $SvnRevision"
> +	fi
> +
> +	git commit -m "$CommitMessage" || \
> +		die "Commit failed"
> +
> +	Status=committed
> +	store_status
> +fi
> +
> +# Since git-svn dcommit can fail for reasons having nothing to do with the
> +# local repository (e.g. the svn server is down), we allow the user to retry
> +# the dcommit by running this command again.
> +if test "$Status" = "committed"; then
> +	git svn dcommit || \
> +		die "Can't commit to Subversion"
> +
> +	# dcommit will update our current HEAD to point to the newly committed
> +	# svn revision. Update grafts file to tell git that it's a merge.
> +	NewRevision="`git rev-list --max-count=1 HEAD`"
> +	echo "$NewRevision $OldHead $RevToMerge" >> $GitDir/info/grafts
This graft look very yucky, and would not scale.

Presumably, the tree in HEAD commit before dcommit match the one in NewRevision, right? I wonder if there is a way to convince "git-svn" after dcommit that the commit you made yourself above is where it should stay.

Show 14 quoted lines
> +
> +	rm "$StatusFile"
> +	echo "Successfully merged $SvnRevision."
> +
> +	Status=""
> +fi
> +
> +if test -n "$Status"; then
> +	die "Unknown status $Status in status file!"
> +fi
> +
> +exit 0
> -- 
> 1.5.2.rc0.35.gf41c8
Junio C Hamano· Apr 27, 2007, 22:38 UTC · re: Junio C Hamano · lore

Re: [PATCH] A utility to perform merges between Subversion branches using git

Junio C Hamano <junkio@cox.net> writes:
Show 10 quoted lines
>> +if test "$Status" = "committed"; then
>> +	git svn dcommit || \
>> +		die "Can't commit to Subversion"
>> +
>> +	# dcommit will update our current HEAD to point to the newly committed
>> +	# svn revision. Update grafts file to tell git that it's a merge.
>> +	NewRevision="`git rev-list --max-count=1 HEAD`"
>> +	echo "$NewRevision $OldHead $RevToMerge" >> $GitDir/info/grafts
>
> This graft look very yucky, and would not scale.
Style issues aside...

I do not know what dcommit is supposed to do, but I wonder if that graft part can be folded into it. Even if git-svn cannot deal with merges that happen on the svn side, assuming if your grafting solution works, it indicates that git-svn itself does not have trouble seeing a merge commit on git side, as its invocation of "git-rev-list --parents" would show that the commit you grafted an extra parent to has two parents and git-svn needs to be able to deal with it.

The command sequence in your contrib script is:
 - make a commit on top of git-svn managed head by hand,
   recording what should have happened if git-svn knew how to
   merge two svn branches;
 - make svn dcommit to record it to svn side, and let it make an
   extra commit to mark the synchronization between git-svn
   managed head and svn repository;
 - pretend that the synchronization commit svn dcommit made has
   an extra commit, which is what you created by hand;

So perhaps you can add an option "git-svn dcommit --merge $OldHead $RevToMerge" that does whatever it usually does and record the resulting commit as a merge between these two commits?

← back to recent threads