Re: [PATCH 1/5] t1300: write test expectations in the test's body
On Thu, Sep 11, 2025, at 15:24, Patrick Steinhardt wrote:
Show 11 quoted lines
> There are a bunch of tests in t1300 where we write the test expectation
> handed over to `test_cmp ()` outside of the test body. This does not
> match our modern test style, and there isn't really a reason why this
> would need to happen outside of the test bodies.
>
> Convert those to instead do so as part of the test itself.
>
> Note that there are two exceptions that we don't convert. In both of
> these cases the expectation is reused across multiple tests, and thus a
> conversion where we'd move that into the first test that uses the
> expectation would be invalid. Those are simply left as-is for now.
This is just a suggestion (which everything is):
Note that there are two exceptions that we leave as-is for now since
they are reused across tests.Show 7 quoted lines
>
> Signed-off-by: Patrick Steinhardt <ps@pks.im>
> ---
> t/t1300-config.sh | 290 ++++++++++++++++++++++++------------------------------
> 1 file changed, 129 insertions(+), 161 deletions(-)
>
> diff --git a/t/t1300-config.sh b/t/t1300-config.sh
For the following I looked mostly at a color-move etc. diff as well as the commit.
Show 13 quoted lines
> index f856821839..bde9bda234 100755
> --- a/t/t1300-config.sh
> +++ b/t/t1300-config.sh
> @@ -134,38 +134,39 @@ test_expect_success 'clear default config' '
> rm -f .git/config
> '
>
> -cat > expect << EOF > +test_expect_success 'initial' '
> + cat >expect <<EOF &&
> [section]
> penguin = little blue
> EOF
> -test_expect_success 'initial' '
Ok. Correct. But I see that you are also overall doing a sort of normalization.
• Remove-tabs if it makes sense • No variable expansion if it makes sense
And here `<<\EOF` would work too. Or is that worse style?
I will keep mentioning this throughout the rest.
Show 12 quoted lines
> git config ${mode_set} section.penguin "little blue" &&
> test_cmp expect .git/config
> '
>
> -cat > expect << EOF
> +test_expect_success 'mixed case' '
> + cat >expect <<EOF &&
> [section]
> penguin = little blue
> Movie = BadPhysics
> EOF
> -test_expect_success 'mixed case' 'Ok. But same as previous.
Show 14 quoted lines
> git config ${mode_set} Section.Movie BadPhysics &&
> test_cmp expect .git/config
> '
>
> -cat > expect << EOF
> +test_expect_success 'similar section' '
> + cat >expect <<EOF &&
> [section]
> penguin = little blue
> Movie = BadPhysics
> [Sections]
> WhatEver = Second
> EOF
> -test_expect_success 'similar section' 'Show 15 quoted lines
> git config ${mode_set} Sections.WhatEver Second &&
> test_cmp expect .git/config
> '
>
> -cat > expect << EOF
> +test_expect_success 'uppercase section' '
> + cat >expect <<EOF &&
> [section]
> penguin = little blue
> Movie = BadPhysics
> @@ -173,7 +174,6 @@ cat > expect << EOF
> [Sections]
> WhatEver = Second
> EOF
> -test_expect_success 'uppercase section' 'Show 20 quoted lines
> git config ${mode_set} SECTION.UPPERCASE true &&
> test_cmp expect .git/config
> '
> @@ -186,7 +186,8 @@ test_expect_success 'replace with non-match
> (actually matching)' '
> git config section.penguin "very blue" !kingpin
> '
>
> -cat > expect << EOF
> +test_expect_success 'append comments' '
> + cat >expect <<EOF &&
> [section]
> Movie = BadPhysics
> UPPERCASE = true
> @@ -198,8 +199,6 @@ cat > expect << EOF
> [Sections]
> WhatEver = Second
> EOF
> -
> -test_expect_success 'append comments' 'Show 13 quoted lines
> git config --replace-all --comment="Pygoscelis papua" section.penguin
> gentoo &&
> git config ${mode_set} --comment="find fish" section.disposition
> peckish &&
> git config ${mode_set} --comment="#abc" section.foo bar &&
> @@ -214,7 +213,9 @@ test_expect_success 'Prohibited LF in comment' '
> test_must_fail git config ${mode_set} --comment="a${LF}b" section.k v
> '
>
> -test_expect_success 'non-match result' 'test_cmp expect .git/config'
> +test_expect_success 'non-match result' '
> + test_cmp expect .git/config
> +'Okay. You normalize the one line to
test_expect_success <name> '
<body>
'The same kind of change done in the next patch `t1300: small style fixups`.
Show 25 quoted lines
>
> test_expect_success 'find mixed-case key by canonical name' '
> test_cmp_config Second sections.whatever
> @@ -265,14 +266,15 @@ test_expect_success 'unset with cont. lines' '
> git config ${mode_unset} beta.baz
> '
>
> -cat > expect <<\EOF
> -[alpha]
> -bar = foo
> -[beta]
> -foo = bar
> -EOF
> -
> -test_expect_success 'unset with cont. lines is correct' 'test_cmp
> expect .git/config'
> +test_expect_success 'unset with cont. lines is correct' '
> + cat >expect <<-\EOF &&
> + [alpha]
> + bar = foo
> + [beta]
> + foo = bar
> + EOF
> + test_cmp expect .git/config
> +'Correct. You eliminate tabs and retain `\`.
Show 22 quoted lines
>
> cat > .git/config << EOF
> [beta] ; silly comment # another comment
> @@ -292,16 +294,15 @@ test_expect_success 'multiple unset' '
> git config ${mode_unset_all} beta.haha
> '
>
> -cat > expect << EOF
> +test_expect_success 'multiple unset is correct' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> [nextSection] noNewline = ouch
> EOF
> -
> -test_expect_success 'multiple unset is correct' '
> test_cmp expect .git/config
> 'Correct. You replaced `'` with `${SQ}` (I assume “single quote”) which is probably good style in general in order to avoid toothpicks.
Show 21 quoted lines
>
> @@ -318,37 +319,38 @@ test_expect_success '--replace-all' '
> git config ${mode_replace_all} beta.haha gamma
> '
>
> -cat > expect << EOF
> +test_expect_success 'all replaced' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> haha = gamma
> [nextSection] noNewline = ouch
> EOF
> -
> -test_expect_success 'all replaced' '
> test_cmp expect .git/config
> 'Show 15 quoted lines
>
> -cat > expect << EOF
> +test_expect_success 'really mean test' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> haha = alpha
> [nextSection] noNewline = ouch
> EOF
> -test_expect_success 'really mean test' '
> +New blank line. That can be dropped.
Show 21 quoted lines
> git config ${mode_set} beta.haha alpha &&
> test_cmp expect .git/config
> '
>
> -cat > expect << EOF
> +test_expect_success 'really really mean test' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> @@ -356,7 +358,6 @@ noIndent= sillyValue ; 'nother silly comment
> [nextSection]
> nonewline = wow
> EOF
> -test_expect_success 'really really mean test' '
> git config ${mode_set} nextsection.nonewline wow &&
> test_cmp expect .git/config
> 'Huh, the similarity between “really” and “really really” confused me. But correct.
Show 20 quoted lines
> @@ -365,23 +366,24 @@ test_expect_success 'get value' '
> test_cmp_config alpha beta.haha
> '
>
> -cat > expect << EOF
> +test_expect_success 'unset' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> [nextSection]
> nonewline = wow
> EOF
> -test_expect_success 'unset' '
> git config ${mode_unset} beta.haha &&
> test_cmp expect .git/config
> 'Show 21 quoted lines
>
> -cat > expect << EOF
> +test_expect_success 'multivar' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> @@ -389,7 +391,6 @@ noIndent= sillyValue ; 'nother silly comment
> nonewline = wow
> NoNewLine = wow2 for me
> EOF
> -test_expect_success 'multivar' '
> git config nextsection.NoNewLine "wow2 for me" "for me$" &&
> test_cmp expect .git/config
> '
> @@ -415,9 +416,10 @@ test_expect_success 'multi-valued get-all returns all' '
> test_cmp expect actual
> 'Show 18 quoted lines
>
> -cat > expect << EOF
> +test_expect_success 'multivar replace' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> @@ -425,7 +427,6 @@ noIndent= sillyValue ; 'nother silly comment
> nonewline = wow3
> NoNewLine = wow2 for me
> EOF
> -test_expect_success 'multivar replace' '
> git config nextsection.nonewline "wow3" "wow$" &&
> test_cmp expect .git/config
> 'Show 21 quoted lines
> @@ -438,17 +439,16 @@ test_expect_success 'invalid unset' '
> test_must_fail git config ${mode_unset} somesection.nonewline
> '
>
> -cat > expect << EOF
> +test_expect_success 'multivar unset' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> [nextSection]
> NoNewLine = wow2 for me
> EOF
> -
> -test_expect_success 'multivar unset' '
> case "$mode" in
> legacy)
> git config --unset nextsection.nonewline "wow3$";;Show 21 quoted lines
> @@ -466,9 +466,10 @@ test_expect_success 'hierarchical section' '
> git config Version.1.2.3eX.Alpha beta
> '
>
> -cat > expect << EOF
> +test_expect_success 'hierarchical section value' '
> + cat >expect <<EOF &&
> [beta] ; silly comment # another comment
> -noIndent= sillyValue ; 'nother silly comment
> +noIndent= sillyValue ; ${SQ}nother silly comment
>
> # empty line
> ; comment
> @@ -479,19 +480,16 @@ noIndent= sillyValue ; 'nother silly comment
> [Version "1.2.3eX"]
> Alpha = beta
> EOF
> -
> -test_expect_success 'hierarchical section value' '
> test_cmp expect .git/config
> 'Show 18 quoted lines
>
> -cat > expect << EOF
> -beta.noindent=sillyValue
> -nextsection.nonewline=wow2 for me
> -123456.a123=987
> -version.1.2.3eX.alpha=beta
> -EOF
> -
> test_expect_success 'working --list' '
> + cat >expect <<-\EOF &&
> + beta.noindent=sillyValue
> + nextsection.nonewline=wow2 for me
> + 123456.a123=987
> + version.1.2.3eX.alpha=beta
> + EOF
> git config ${mode_prefix}list > output &&
> test_cmp expect output
> 'Correct. Removing tabs now that you can. Also no variable expansion.
Show 22 quoted lines
> @@ -500,44 +498,40 @@ test_expect_success '--list without repo produces
> empty output' '
> test_must_be_empty output
> '
>
> -cat > expect << EOF
> -beta.noindent
> -nextsection.nonewline
> -123456.a123
> -version.1.2.3eX.alpha
> -EOF
> -
> test_expect_success '--name-only --list' '
> + cat >expect <<-EOF &&
> + beta.noindent
> + nextsection.nonewline
> + 123456.a123
> + version.1.2.3eX.alpha
> + EOF
> git config ${mode_prefix}list --name-only >output &&
> test_cmp expect output
> 'Correct. But you can use `<<-\EOF`.
Show 14 quoted lines
>
> -cat > expect << EOF
> -beta.noindent sillyValue
> -nextsection.nonewline wow2 for me
> -EOF
> -
> test_expect_success '--get-regexp' '
> + cat >expect <<-EOF &&
> + beta.noindent sillyValue
> + nextsection.nonewline wow2 for me
> + EOF
> git config ${mode_get_regexp} in >output &&
> test_cmp expect output
> 'Show 14 quoted lines
>
> -cat > expect << EOF
> -beta.noindent
> -nextsection.nonewline
> -EOF
> -
> test_expect_success '--name-only --get-regexp' '
> + cat >expect <<-EOF &&
> + beta.noindent
> + nextsection.nonewline
> + EOF
> git config ${mode_get_regexp} --name-only in >output &&
> test_cmp expect output
> 'Show 14 quoted lines
>
> -cat > expect << EOF
> -wow2 for me
> -wow4 for you
> -EOF
> -
> test_expect_success '--add' '
> + cat >expect <<-EOF &&
> + wow2 for me
> + wow4 for you
> + EOF
> git config --add nextsection.nonewline "wow4 for you" &&
> git config ${mode_get_all} nextsection.nonewline > output &&
> test_cmp expect outputShow 11 quoted lines
> @@ -558,37 +552,32 @@ test_expect_success 'get variable with empty value' '
> git config --get emptyvalue.variable ^$
> '
>
> -echo novalue.variable > expect
> -
> test_expect_success 'get-regexp variable with no value' '
> + echo novalue.variable >expect &&
> git config ${mode_get_regexp} novalue > output &&
> test_cmp expect output
> 'Show 8 quoted lines
>
> -echo 'novalue.variable true' > expect
> -
> test_expect_success 'get-regexp --bool variable with no value' '
> + echo "novalue.variable true" >expect &&
> git config ${mode_get_regexp} --bool novalue > output &&
> test_cmp expect output
> 'Show 8 quoted lines
>
> -echo 'emptyvalue.variable ' > expect
> -
> test_expect_success 'get-regexp variable with empty value' '
> + echo "emptyvalue.variable " >expect &&
> git config ${mode_get_regexp} emptyvalue > output &&
> test_cmp expect output
> 'Show 8 quoted lines
>
> -echo true > expect
> -
> test_expect_success 'get bool variable with no value' '
> + echo true >expect &&
> git config --bool novalue.variable > output &&
> test_cmp expect output
> '
Show 8 quoted lines
>
> -echo false > expect
> -
> test_expect_success 'get bool variable with empty value' '
> + echo false > expect &&
> git config --bool emptyvalue.variable > output &&
> test_cmp expect output
> '
Here you should use `>expect`.
Show 17 quoted lines
> @@ -604,19 +593,19 @@ cat > .git/config << EOF
> c = d
> EOF
>
> -cat > expect << EOF
> +test_expect_success 'new section is partial match of another' '
> + cat >expect <<EOF &&
> [a.b]
> c = d
> [a]
> x = y
> EOF
> -
> -test_expect_success 'new section is partial match of another' '
> git config a.x y &&
> test_cmp expect .git/config
> '
Show 16 quoted lines
>
> -cat > expect << EOF
> +test_expect_success 'new variable inserts into proper section' '
> + cat >expect <<EOF &&
> [a.b]
> c = d
> [a]
> @@ -625,8 +614,6 @@ cat > expect << EOF
> [b]
> x = y
> EOF
> -
> -test_expect_success 'new variable inserts into proper section' '
> git config b.x y &&
> git config a.b c &&
> test_cmp expect .git/config
Correct. You can use `<<\EOF`.
Show 12 quoted lines
> @@ -642,11 +629,10 @@ cat > other-config << EOF
> bahn = strasse
> EOF
>
> -cat > expect << EOF
> -ein.bahn=strasse
> -EOF
> -
> test_expect_success 'alternative GIT_CONFIG' '
> + cat >expect <<-EOF &&
> + ein.bahn=strasse
> + EOF
Show 20 quoted lines
> GIT_CONFIG=other-config git config ${mode_prefix}list >output &&
> test_cmp expect output
> '
> @@ -675,14 +661,13 @@ test_expect_success 'refer config from subdirectory' '
> test_cmp_config -C x strasse --file=../other-config --get ein.bahn
> '
>
> -cat > expect << EOF
> +test_expect_success '--set in alternative file' '
> + cat >expect <<\EOF &&
> [ein]
> bahn = strasse
> [anwohner]
> park = ausweis
> EOF
> -
> -test_expect_success '--set in alternative file' '
> git config --file=other-config anwohner.park ausweis &&
> test_cmp expect other-config
> 'Correct. Here you do `<< EOF` → `<<\EOF`.
Show 18 quoted lines
> @@ -730,7 +715,8 @@ test_expect_success 'rename another section' '
> git config ${mode_prefix}rename-section branch."1 234 blabl/a" branch.drei
> '
>
> -cat > expect << EOF
> +test_expect_success 'rename succeeded' '
> + cat >expect <<\EOF &&
> # Hallo
> #Bello
> [branch "zwei"]
> @@ -740,8 +726,6 @@ cat > expect << EOF
> [branch "drei"]
> weird
> EOF
> -
> -test_expect_success 'rename succeeded' '
> test_cmp expect .git/config
> 'Ditto.
(That four tests are named `rename succeeded` is a bit disorienting.)
Show 20 quoted lines
>
> @@ -753,7 +737,8 @@ test_expect_success 'rename a section with a var on
> the same line' '
> git config ${mode_prefix}rename-section branch.vier branch.zwei
> '
>
> -cat > expect << EOF
> +test_expect_success 'rename succeeded' '
> + cat >expect <<\EOF &&
> # Hallo
> #Bello
> [branch "zwei"]
> @@ -765,8 +750,6 @@ weird
> [branch "zwei"]
> z = 1
> EOF
> -
> -test_expect_success 'rename succeeded' '
> test_cmp expect .git/config
> 'Show 17 quoted lines
>
> @@ -816,32 +799,29 @@ test_expect_success 'remove section' '
> git config ${mode_prefix}remove-section branch.zwei
> '
>
> -cat > expect << EOF
> +test_expect_success 'section was removed properly' '
> + cat >expect <<\EOF &&
> # Hallo
> #Bello
> [branch "drei"]
> weird
> EOF
> -
> -test_expect_success 'section was removed properly' '
> test_cmp expect .git/config
> 'Show 19 quoted lines
>
> -cat > expect << EOF
> +test_expect_success 'section ending' '
> + cat >expect <<\EOF &&
> [gitcvs]
> enabled = true
> dbname = %Ggitcvs2.%a.%m.sqlite
> [gitcvs "ext"]
> dbname = %Ggitcvs1.%a.%m.sqlite
> EOF
> -
> -test_expect_success 'section ending' '
> rm -f .git/config &&
> git config ${mode_set} gitcvs.enabled true &&
> git config ${mode_set} gitcvs.ext.dbname %Ggitcvs1.%a.%m.sqlite &&
> git config ${mode_set} gitcvs.dbname %Ggitcvs2.%a.%m.sqlite &&
> test_cmp expect .git/config
> -
> 'Ditto. And normalized blank lines, that’s good.
Show 32 quoted lines
>
> test_expect_success numbers '
> @@ -885,19 +865,17 @@ test_expect_success 'invalid stdin config' '
> test_grep "bad config line 1 in standard input" output
> '
>
> -cat > expect << EOF
> -true
> -false
> -true
> -false
> -true
> -false
> -true
> -false
> -EOF
> -
> test_expect_success bool '
> -
> + cat >expect <<-\EOF &&
> + true
> + false
> + true
> + false
> + true
> + false
> + true
> + false
> + EOF
> git config ${mode_set} bool.true1 01 &&
> git config ${mode_set} bool.true2 -1 &&
> git config ${mode_set} bool.true3 YeS &&Show 20 quoted lines
> @@ -923,7 +901,8 @@ test_expect_success 'invalid bool (set)' '
>
> test_must_fail git config --bool bool.nobool foobar'
>
> -cat > expect <<\EOF
> +test_expect_success 'set --bool' '
> + cat >expect<<\EOF &&
> [bool]
> true1 = true
> true2 = true
> @@ -934,9 +913,6 @@ cat > expect <<\EOF
> false3 = false
> false4 = false
> EOF
> -
> -test_expect_success 'set --bool' '
> -
> rm -f .git/config &&
> git config --bool bool.true1 01 &&
> git config --bool bool.true2 -1 &&
Correct. But add a space? (>expect<<\EOF)
Show 18 quoted lines
> @@ -948,15 +924,13 @@ test_expect_success 'set --bool' '
> git config --bool bool.false4 FALSE &&
> test_cmp expect .git/config'
>
> -cat > expect <<\EOF
> +test_expect_success 'set --int' '
> + cat >expect <<\EOF &&
> [int]
> val1 = 1
> val2 = -1
> val3 = 5242880
> EOF
> -
> -test_expect_success 'set --int' '
> -
> rm -f .git/config &&
> git config --int int.val1 01 &&
> git config --int int.val2 -1 &&
Show 19 quoted lines
> @@ -994,7 +968,8 @@ test_expect_success 'get --bool-or-int' '
> test_cmp expect actual
> '
>
> -cat >expect <<\EOF
> +test_expect_success 'set --bool-or-int' '
> + cat >expect <<\EOF &&
> [bool]
> true1 = true
> false1 = false
> @@ -1005,8 +980,6 @@ cat >expect <<\EOF
> int2 = 1
> int3 = -1
> EOF
> -
> -test_expect_success 'set --bool-or-int' '
> rm -f .git/config &&
> git config --bool-or-int bool.true1 true &&
> git config --bool-or-int bool.false1 false &&
Correct.
I tried with here `<<-\EOF` but that made something fail. :)
Show 17 quoted lines
> @@ -1018,14 +991,13 @@ test_expect_success 'set --bool-or-int' '
> test_cmp expect .git/config
> '
>
> -cat >expect <<\EOF
> +test_expect_success !MINGW 'set --path' '
> + cat >expect <<\EOF &&
> [path]
> home = ~/
> normal = /dev/null
> trailingtilde = foo~
> EOF
> -
> -test_expect_success !MINGW 'set --path' '
> rm -f .git/config &&
> git config --path path.home "~/" &&
> git config --path path.normal "/dev/null" &&
Show 21 quoted lines
> @@ -1037,25 +1009,23 @@ then
> test_set_prereq HOMEVAR
> fi
>
> -cat >expect <<EOF
> -$HOME/
> -/dev/null
> -foo~
> -EOF
> -
> test_expect_success HOMEVAR 'get --path' '
> + cat >expect <<-EOF &&
> + $HOME/
> + /dev/null
> + foo~
> + EOF
> git config --get --path path.home > result &&
> git config --get --path path.normal >> result &&
> git config --get --path path.trailingtilde >> result &&
> test_cmp expect result
> '
Show 14 quoted lines
>
> -cat >expect <<\EOF
> -/dev/null
> -foo~
> -EOF
> -
> test_expect_success !MINGW 'get --path copes with unset $HOME' '
> + cat >expect <<-\EOF &&
> + /dev/null
> + foo~
> + EOF
> (
> sane_unset HOME &&
> test_must_fail git config --get --path path.home \
Show 15 quoted lines
> @@ -1112,12 +1082,11 @@ test_expect_success 'get --type=color' '
> test_cmp expect actual
> '
>
> -cat >expect << EOF
> +test_expect_success 'set --type=color' '
> + cat >expect <<EOF &&
> [foo]
> color = red
> EOF
> -
> -test_expect_success 'set --type=color' '
> rm .git/config &&
> git config --type=color foo.color "red" &&
> test_cmp expect .git/config
Correct. You can use `<<\EOF`.
Show 18 quoted lines
> @@ -1133,14 +1102,14 @@ test_expect_success 'set --type=color barfs on
> non-color' '
> test_grep "cannot parse color" error
> '
>
> -cat > expect << EOF
> +test_expect_success 'quoting' '
> + cat >expect <<EOF &&
> [quote]
> leading = " test"
> ending = "test "
> semicolon = "test;test"
> hash = "test#test"
> EOF
> -test_expect_success 'quoting' '
> rm -f .git/config &&
> git config ${mode_set} quote.leading " test" &&
> git config ${mode_set} quote.ending "test " &&Correct. You can use `<<\EOF`.
Show 16 quoted lines
> @@ -1166,13 +1135,12 @@ inued
> inued"
> EOF
>
> -cat > expect <<\EOF
> +test_expect_success 'value continued on next line' '
> + cat >expect <<\EOF &&
> section.continued=continued
> section.noncont=not continued
> section.quotecont=cont;inued
> EOF
> -
> -test_expect_success 'value continued on next line' '
> git config ${mode_prefix}list > result &&
> test_cmp expect result
> 'Correct. You can use
cat >expect <<-\EOF &&
section.continued=continued
section.noncont=not continued
section.quotecont=cont;inued
EOF
>
> --
> 2.51.0.450.g87641ccf93.dirty
Patrick Steinhardt