threads / bug / 60108

[BUG] `git describe` doesn't traverse the graph in topological order

Subject: [BUG] `git describe` doesn't traverse the graph in topological order

## tl;dr

20 messages between Aug 12, 2023 and Feb 28, 2026.

replies: 19people: 5as markdown or json

Ben Boeckel· Aug 12, 2023, 19:36 UTC · lore
Hi,

I found an issue where `git describe` doesn't find a "closer" tag than another tag as the correct one to base the description off of. I have a reproducer, but I'll first give details of the real world issue.

Repository: https://gitlab.kitware.com/vtk/vtk.git
`master` as of: dedf87b3a1b7e5be5d8cdb46b37ad3030590b8ac

$ git rev-parse HEAD dedf87b3a1b7e5be5d8cdb46b37ad3030590b8ac $ git rev-parse HEAD~2^2 da2482f716310fc59ac4be42ce977f6badc6af95 $ git rev-prase v9.3.0.rc1 f150d52568f4e00aa9c8b1568a521a08ded8d4cb $ git rev-prase v9.3.0.rc1^{commit} da2482f716310fc59ac4be42ce977f6badc6af95 $ git rev-parse HEAD~2^2~2 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5 $ git rev-prase v9.3.0.rc0 e5e13b14629d445bf65d5f8a181920ed9b97d54c $ git rev-prase v9.3.0.rc0^{commit} 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5 $ git describe HEAD v9.3.0.rc0-56-gdedf87b3a1 $ git describe --matches v9.3.0.rc1 HEAD v9.3.0.rc1-86876-gdedf87b3a1

As you can see:
- v9.3.0.rc1 is "closer" to `HEAD` than v9.3.0.rc0 (created as a
  workaround for this bug; v9.2.6 is otherwise reported)
- v9.3.0.rc0 is an ancestor of v9.3.0.rc1
- Both v9.3.0.rc0 and v9.3.0.rc1 are ancestors of `HEAD`
- `git describe` reports that `HEAD` is "closest" to v9.3.0.rc0
- Forcing the issue and asking for v9.3.0.rc1 shows that it thinks there
  are almost 87000 commits somehow not on that commit.

I have a reproducer script attached. It reproduces back to 2.9.0 and probably before. 2.8.0 didn't support the structure hiding that newer OpenSSL 1.1 has done and given that it's at least that old, I don't think it matters too much for backporting or anything like that.

I instrumented `git describe` with some `printf` debugging (diff attached) and found out that the commit traversal is not happening in topological order. I suspect that this is the root cause of the issue:

    looking at commit 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5
    depth of 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5: 16
    find order of 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5: 2
    setting flag 4 for commit 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5
    flag for 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5: 5
    pushing depth of da2482f716310fc59ac4be42ce977f6badc6af95 because of 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5 (flag_within): 16
    setting flag 5 for commit d478d2e22e81ee2602035fe1d731b402d9b4eda7 due to ancestry
    looking at commit 1c3d839dac92761ae0866e23d89bdc8ee690de08
    depth of 1c3d839dac92761ae0866e23d89bdc8ee690de08: 17
    find order of 1c3d839dac92761ae0866e23d89bdc8ee690de08: 3
    setting flag 8 for commit 1c3d839dac92761ae0866e23d89bdc8ee690de08
    flag for 1c3d839dac92761ae0866e23d89bdc8ee690de08: b
    pushing depth of 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5 because of 1c3d839dac92761ae0866e23d89bdc8ee690de08 (flag_within): 17
    setting flag f for commit 0a77d7cf4fdbf489ee5d38c6fec6517574cdaeb5 due to ancestry

It looks at 0a77d7cf4 before it looks at 1c3d839da (which is v9.3.0.rc1~), but 1c3d839da~ *is* 0a77d7cf4. Because 0a77d7cf4 has already passed on its presence flags to its parent(s), the update performed when processing 1c3d839da has no effect. Therefore the "entire" history is not seen as being reachable from da2482f71 and it ends up not being the best match.

I will note that the authorship date of 1c3d839da is before that of either 0a77d7cf4 or da2482f71 (due to a rebase that reordered the commits to keep 1c3d839da on the release-only part of the branch), but the reproducer script doesn't seem to care that much.

I suspect that building of the `commit_list` is the problem, probably by using `commit_list_insert_by_date` instead of by topological sorting. The reproducer script doesn't do anything (AFAICT) sneaky with dates (e.g., rebasing and such) though, so I'm nowhere near 100% confident about that.

Perhaps commits should be re-scheduled if their `flags` get updated based on a newly discovered ancestor while traversing? I suspect that depth tracking becomes more complicated in that case though because the second pass on 0a77d7cf4 needs to subtract a depth from the relevant tags with the new flag value. But it'd find the right tag at least…

Thanks,
--Ben
diff --git a/builtin/describe.c b/builtin/describe.c
index b28a4a1f82..5895d1af3a 100644
--- a/builtin/describe.c
+++ b/builtin/describe.c
@@ -264,8 +264,10 @@ static unsigned long finish_depth_computation(
 			}
 			if (!a)
 				break;
-		} else
+		} else {
 			best->depth++;
+			fprintf(stderr, "pushing depth of %s (finish_depth_computation): %d\n", oid_to_hex(&c->object.oid), best->depth);
+		}
 		while (parents) {
 			struct commit *p = parents->item;
 			repo_parse_commit(the_repository, p);
@@ -363,19 +365,24 @@ static void describe_commit(struct object_id *oid, struct strbuf *dst)
 		struct commit_list *parents = c->parents;
 		struct commit_name **slot;
 
+		fprintf(stderr, "\n\nlooking at commit %s\n", oid_to_hex(&c->object.oid));
 		seen_commits++;
 		slot = commit_names_peek(&commit_names, c);
 		n = slot ? *slot : NULL;
 		if (n) {
 			if (!tags && !all && n->prio < 2) {
+				fprintf(stderr, "skipping unannotated tag %s\n", oid_to_hex(&c->object.oid));
 				unannotated_cnt++;
 			} else if (match_cnt < max_candidates) {
 				struct possible_tag *t = &all_matches[match_cnt++];
 				t->name = n;
 				t->depth = seen_commits - 1;
+				fprintf(stderr, "depth of %s: %d\n", oid_to_hex(&c->object.oid), t->depth);
 				t->flag_within = 1u << match_cnt;
 				t->found_order = match_cnt;
+				fprintf(stderr, "find order of %s: %d\n", oid_to_hex(&c->object.oid), t->found_order);
 				c->object.flags |= t->flag_within;
+				fprintf(stderr, "setting flag %x for commit %s\n", t->flag_within, oid_to_hex(&c->object.oid));
 				if (n->prio == 2)
 					annotated_cnt++;
 			}
@@ -386,11 +393,15 @@ static void describe_commit(struct object_id *oid, struct strbuf *dst)
 		}
 		for (cur_match = 0; cur_match < match_cnt; cur_match++) {
 			struct possible_tag *t = &all_matches[cur_match];
-			if (!(c->object.flags & t->flag_within))
+			if (!(c->object.flags & t->flag_within)) {
 				t->depth++;
+				fprintf(stderr, "flag for %s: %x\n", oid_to_hex(&c->object.oid), c->object.flags);
+				fprintf(stderr, "pushing depth of %s because of %s (flag_within): %d\n", oid_to_hex(&t->name->peeled), oid_to_hex(&c->object.oid), t->depth);
+			}
 		}
 		/* Stop if last remaining path already covered by best candidate(s) */
 		if (annotated_cnt && !list) {
+			fprintf(stderr, "checking for best candidate\n");
 			int best_depth = INT_MAX;
 			unsigned best_within = 0;
 			for (cur_match = 0; cur_match < match_cnt; cur_match++) {
@@ -415,6 +426,7 @@ static void describe_commit(struct object_id *oid, struct strbuf *dst)
 			if (!(p->object.flags & SEEN))
 				commit_list_insert_by_date(p, &list);
 			p->object.flags |= c->object.flags;
+			fprintf(stderr, "setting flag %x for commit %s due to ancestry\n", p->object.flags, oid_to_hex(&p->object.oid));
 			parents = parents->next;
 
 			if (first_parent)
Ben Boeckel· Sep 22, 2023, 15:39 UTC · re: Ben Boeckel · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Sat, Aug 12, 2023 at 15:36:56 -0400, Ben Boeckel wrote:
> I found an issue where `git describe` doesn't find a "closer" tag than
> another tag as the correct one to base the description off of. I have a
> reproducer, but I'll first give details of the real world issue.

Bump. Can anyone provide guidance as to what the best solution to this might be?

Thanks,
--Ben
rsbecker@nexbridge.com· Sep 22, 2023, 16:13 UTC · re: Ben Boeckel · lore

RE: [BUG] `git describe` doesn't traverse the graph in topological order

On Friday, September 22, 2023 11:40 AM, Ben Boeckel wrote:
Show 6 quoted lines
>On Sat, Aug 12, 2023 at 15:36:56 -0400, Ben Boeckel wrote:
>> I found an issue where `git describe` doesn't find a "closer" tag than
>> another tag as the correct one to base the description off of. I have
>> a reproducer, but I'll first give details of the real world issue.
>
>Bump. Can anyone provide guidance as to what the best solution to this might be?

Can you provide details? `git describe` is sensitive to --first-parent and whether the tag has annotations. --Randall

'Ben Boeckel'· Sep 22, 2023, 16:51 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 12:13:00 -0400, rsbecker@nexbridge.com wrote:
Show 10 quoted lines
> On Friday, September 22, 2023 11:40 AM, Ben Boeckel wrote:
> >On Sat, Aug 12, 2023 at 15:36:56 -0400, Ben Boeckel wrote:
> >> I found an issue where `git describe` doesn't find a "closer" tag than
> >> another tag as the correct one to base the description off of. I have
> >> a reproducer, but I'll first give details of the real world issue.
> >
> >Bump. Can anyone provide guidance as to what the best solution to this might be?
> 
> Can you provide details? `git describe` is sensitive to --first-parent
> and whether the tag has annotations.
I provided more details and a reproducer in the original email:
    https://lore.kernel.org/git/ZNffWAgldUZdpQcr@farprobe/T/#u
Thanks,
--Ben
rsbecker@nexbridge.com· Sep 22, 2023, 17:14 UTC · re: 'Ben Boeckel' · lore

RE: [BUG] `git describe` doesn't traverse the graph in topological order

On Friday, September 22, 2023 12:51 PM, Ben Boeckel wrote:
Show 15 quoted lines
>On Fri, Sep 22, 2023 at 12:13:00 -0400, rsbecker@nexbridge.com wrote:
>> On Friday, September 22, 2023 11:40 AM, Ben Boeckel wrote:
>> >On Sat, Aug 12, 2023 at 15:36:56 -0400, Ben Boeckel wrote:
>> >> I found an issue where `git describe` doesn't find a "closer" tag
>> >> than another tag as the correct one to base the description off of.
>> >> I have a reproducer, but I'll first give details of the real world issue.
>> >
>> >Bump. Can anyone provide guidance as to what the best solution to this might be?
>>
>> Can you provide details? `git describe` is sensitive to --first-parent
>> and whether the tag has annotations.
>
>I provided more details and a reproducer in the original email:
>
>    https://lore.kernel.org/git/ZNffWAgldUZdpQcr@farprobe/T/#u
As I indicated, the command is sensitive to --first-parent. For example:

$ git describe v9.3.0.rc0-520-g1339e86833 $ git describe --first-parent v9.0.0.rc1-5143-g1339e86833

You have multiple parents in your tree of HEAD. This is probably confusing the interpretation. The most closely connected tag to HEAD is v9.3.0.rc0, from what I can read from your tree. Dates and times of the commit do not participate in this determination, to my knowledge. You can force selection of a subset of tags by specifying the --match=pattern argument.
There appears to be a merge at 446120fd88 which brings v9.3.0.rc0 closer to HEAD than v9.3.0.rc1.
'Ben Boeckel'· Sep 22, 2023, 17:38 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 13:14:30 -0400, rsbecker@nexbridge.com wrote:
Show 23 quoted lines
> On Friday, September 22, 2023 12:51 PM, Ben Boeckel wrote:
> >On Fri, Sep 22, 2023 at 12:13:00 -0400, rsbecker@nexbridge.com wrote:
> >> On Friday, September 22, 2023 11:40 AM, Ben Boeckel wrote:
> >> >On Sat, Aug 12, 2023 at 15:36:56 -0400, Ben Boeckel wrote:
> >> >> I found an issue where `git describe` doesn't find a "closer" tag
> >> >> than another tag as the correct one to base the description off of.
> >> >> I have a reproducer, but I'll first give details of the real world issue.
> >> >
> >> >Bump. Can anyone provide guidance as to what the best solution to this might be?
> >>
> >> Can you provide details? `git describe` is sensitive to --first-parent
> >> and whether the tag has annotations.
> >
> >I provided more details and a reproducer in the original email:
> >
> >    https://lore.kernel.org/git/ZNffWAgldUZdpQcr@farprobe/T/#u
> 
> As I indicated, the command is sensitive to --first-parent. For example:
> 
> $ git describe
> v9.3.0.rc0-520-g1339e86833
> $ git describe --first-parent
> v9.0.0.rc1-5143-g1339e86833

Sorry, but this is just even more confusing to me as neither tag is on the first-parent history of `HEAD`.

Show 6 quoted lines
> You have multiple parents in your tree of HEAD. This is probably
> confusing the interpretation. The most closely connected tag to HEAD
> is v9.3.0.rc0, from what I can read from your tree. Dates and times of
> the commit do not participate in this determination, to my knowledge.
> You can force selection of a subset of tags by specifying the
> --match=pattern argument.

I don't see how that is possible since v9.3.0.rc0 is v9.3.0.rc1~2. Note the "not on the tag" commit count for the descriptions being wildly different.

> There appears to be a merge at 446120fd88 which brings v9.3.0.rc0
> closer to HEAD than v9.3.0.rc1.

That is still giving an incorrect description as there are *fewer* commits not on rc1 than rc0 relative to HEAD (as rc0 is an ancestor of rc1).

Thanks,
--Ben
Junio C Hamano· Sep 22, 2023, 17:51 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

<rsbecker@nexbridge.com> writes:
> There appears to be a merge at 446120fd88 which brings v9.3.0.rc0 closer to HEAD than v9.3.0.rc1.
I didn't look at the actual graph but let me say I trust you ;-)

I wonder if there should be an obvious "explain why you gave this name" mode added to the command, though. The command should be able to say "The closest path from HEAD to any tag is via this, that, and that commit, which is N hops to tag T0", and from there, the user should be able to say "Oh, I thought T1 was closer, let me try again to describe HEAD, limiting the candidate only to T1" and run the command in that mode, which should be able to say "The closest path from HEAD to any tag that is allowed as a candidate is via these commits, which is M hops to tag T1". And if M is smaller than N, then that may deserve to trigger a bug report (but as you said, there are rules like preferring annotated over unannotated tags involved, so it may not as straight-forward as comparing the two integer hop counts).

Thanks for digging.
rsbecker@nexbridge.com· Sep 22, 2023, 18:12 UTC · re: Junio C Hamano · lore

RE: [BUG] `git describe` doesn't traverse the graph in topological order

On Friday, September 22, 2023 1:52 PM, Junio C Hamano wrote:
><rsbecker@nexbridge.com> writes:
>
>> There appears to be a merge at 446120fd88 which brings v9.3.0.rc0 closer
to HEAD
Show 5 quoted lines
>than v9.3.0.rc1.
>
>I didn't look at the actual graph but let me say I trust you ;-)
>
>I wonder if there should be an obvious "explain why you gave this name"
mode added
>to the command, though.  The command should be able to say "The closest
path from
>HEAD to any tag is via this, that, and that commit, which is N hops to tag
T0", and
>from there, the user should be able to say "Oh, I thought T1 was closer,
let me try
>again to describe HEAD, limiting the candidate only to T1" and run the
command in
>that mode, which should be able to say "The closest path from HEAD to any
tag that
>is allowed as a candidate is via these commits, which is M hops to tag T1".
And if M
>is smaller than N, then that may deserve to trigger a bug report (but as
you said,
>there are rules like preferring annotated over unannotated tags involved,
so it may
>not as straight-forward as comparing the two integer hop counts).
>
>Thanks for digging.

I'm wondering whether we need something more general that --first-parent. Perhaps something like

git describe commitish [ commitish ... ]

Where the traversal must cross the set of specified commitish points in history in order to find the expected tag. In Ben's case, I do not think that would help much, given the complexity of his history. Perhaps a --verbose argument might display the analysis path done by git describe as above. Sadly, I am not familiar with this code area.

What confuses me is how, in the other subthread, that adding sleep 1 to the construction of history should make any difference. My understanding is that the path to the tag is invariant of the commit-date.

'Ben Boeckel'· Sep 22, 2023, 18:44 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 14:12:31 -0400, rsbecker@nexbridge.com wrote:
> What confuses me is how, in the other subthread, that adding sleep 1 to the
> construction of history should make any difference. My understanding is that
> the path to the tag is invariant of the commit-date.

Yes. It is explained that the commit date stored is only to 1 second granularity. Since the commits are stored in commit-date, an equal commit date ends up "twisting" the history and traversing some ancestors of commits before the commits themsevles. This loses the "seen" bit tracking that is done and ends up labeling way more commits as "not part of" ancestors. By sleeping for a second, the commit dates can be totally ordered reliably.

And this tracks with my and the other thread's result that the traversal is not paying attention to the topological history properly.

--Ben
rsbecker@nexbridge.com· Sep 22, 2023, 18:49 UTC · re: 'Ben Boeckel' · lore

RE: [BUG] `git describe` doesn't traverse the graph in topological order

On Friday, September 22, 2023 2:44 PM, Ben Boeckel wrote:
Show 11 quoted lines
>On Fri, Sep 22, 2023 at 14:12:31 -0400, rsbecker@nexbridge.com wrote:
>> What confuses me is how, in the other subthread, that adding sleep 1
>> to the construction of history should make any difference. My
>> understanding is that the path to the tag is invariant of the commit-date.
>
>Yes. It is explained that the commit date stored is only to 1 second granularity. Since
>the commits are stored in commit-date, an equal commit date ends up "twisting" the
>history and traversing some ancestors of commits before the commits themsevles.
>This loses the "seen" bit tracking that is done and ends up labeling way more
>commits as "not part of" ancestors. By sleeping for a second, the commit dates can
>be totally ordered reliably.
This is going to be awkward to resolve as time_t only resolves (portably) to 1 second intervals. I still would prefer the resolution to be path-based rather than time-based.
'Ben Boeckel'· Sep 22, 2023, 19:05 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 14:49:58 -0400, rsbecker@nexbridge.com wrote:
Show 11 quoted lines
> On Friday, September 22, 2023 2:44 PM, Ben Boeckel wrote:
> >Yes. It is explained that the commit date stored is only to 1 second granularity. Since
> >the commits are stored in commit-date, an equal commit date ends up "twisting" the
> >history and traversing some ancestors of commits before the commits themsevles.
> >This loses the "seen" bit tracking that is done and ends up labeling way more
> >commits as "not part of" ancestors. By sleeping for a second, the commit dates can
> >be totally ordered reliably.
> 
> This is going to be awkward to resolve as time_t only resolves
> (portably) to 1 second intervals. I still would prefer the resolution
> to be path-based rather than time-based.

I certainly agree, but I'm not sure of the best way of doing that. Do we create/load a commit graph and use that for resolving insertion order into the commit heap?

--Ben
rsbecker@nexbridge.com· Sep 22, 2023, 19:27 UTC · re: 'Ben Boeckel' · lore

RE: [BUG] `git describe` doesn't traverse the graph in topological order

On Friday, September 22, 2023 3:06 PM, Ben Boeckel wrote:
Show 16 quoted lines
>On Fri, Sep 22, 2023 at 14:49:58 -0400, rsbecker@nexbridge.com wrote:
>> On Friday, September 22, 2023 2:44 PM, Ben Boeckel wrote:
>> >Yes. It is explained that the commit date stored is only to 1 second
>> >granularity. Since the commits are stored in commit-date, an equal
>> >commit date ends up "twisting" the history and traversing some ancestors of
>commits before the commits themsevles.
>> >This loses the "seen" bit tracking that is done and ends up labeling
>> >way more commits as "not part of" ancestors. By sleeping for a
>> >second, the commit dates can be totally ordered reliably.
>>
>> This is going to be awkward to resolve as time_t only resolves
>> (portably) to 1 second intervals. I still would prefer the resolution
>> to be path-based rather than time-based.
>
>I certainly agree, but I'm not sure of the best way of doing that. Do we create/load a
>commit graph and use that for resolving insertion order into the commit heap?
I actually thought it worked that way. This may end up in a bigger change than fixing the issue because --first-parent does not appear to be sufficient to resolve the correct tag from your graph. My thought on using multiple commitish values to do that may help, but implementing that could lead to an O(n*m) scan (n=max commit tree width, m=depth to tag), plus a commitish hash lookup.
'Ben Boeckel'· Nov 20, 2025, 02:48 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 15:27:01 -0400, rsbecker@nexbridge.com wrote:
Show 6 quoted lines
> I actually thought it worked that way. This may end up in a bigger
> change than fixing the issue because --first-parent does not appear to
> be sufficient to resolve the correct tag from your graph. My thought
> on using multiple commitish values to do that may help, but
> implementing that could lead to an O(n*m) scan (n=max commit tree
> width, m=depth to tag), plus a commitish hash lookup.

So I finally found some time to go back to this. The actual fix is actually rather easy (patch attached). However, as guessed at previously in the thread, the performance is in the tank without an up-to-date commit graph ("instant" with it versus "minutes" without). On the other hand, it is *accurate*. It does fix one expect-fail test case already in the test suite (also included in the patch).

We could go one of two (or more! feel free to offer alternatives) ways:
- swallow the pill and accept the performance for accurate results
  (e.g., warn if there is not a recent `commit-graph`)
- add an `--accurate` flag to optionally use it with the caveat that
  reported descriptions may *change* under the flag (e.g., with the
  reproducer script, a "working" description is `tag-release-7-g<hash>`,
  but with the graph, it is the correct `tag-release-5-g<hash>`.

Also note the the reproducer provided was "fixed" in 7379046221 (describe: stop digging for max_candidates+1, 2024-11-06) because it stopped searching because there were no more tags in the history. Tagging the root commit preserves the reproducer state. I've attached an updated reproducer script as well.

Thoughts on a plan forward?
--Ben
From ca4df5b9c9542315f77c166d47d5c63a2ebdafd1 Mon Sep 17 00:00:00 2001
From: Ben Boeckel <mathstuf@gmail.com>
Date: Wed, 12 Nov 2025 23:53:20 -0500
Subject: [PATCH 1/1] describe: traverse commits by ancestry instead of commit
 date

An ancestor commit should never be traversed before its descendents. This could happen if a series of commits are made in rapid succession and they all share a commit date (to the 1-second resolution supported in the metadata).

This was discovered in VTK's history where a `git describe` would return the previous release's tag name rather than the one just made. The problematic topology looks like:

    H ---- M1 -- M2 -- M3 -- M4 - ROOT
    |       \     \     \    \    /|
    |        \     \     |    \  / |
    |         \    R2 ---|---- R1 |
    |          \   /     |    /  /
     \          \ /       \  /  /
      P1 - P2 - P3 ------- P4 --

Where P1 and P3 are tagged commits. If all commits share a commit date, `git describe` traverses in the following order:

  - H
  - M1
  - P1 (tagged)
  - M2
  - P3 (tagged)
  - P2
  - M3
  - R2
  - P4
  - M4
  - ROOT
  - R1

Although P1 is traversed before P3, P1's depth is incremented due to the `flag_within` check despite the ancestry actually being the other way around. When all is said and done, the description is reported as `P3-7-g<hash>` despite the P1 tagged commit having it as an ancestor. If P1 is restricted using `describe --match`, it is reported as `P1-10-g<hash>` due to the traversal order issue.

Using topology sorting on the commit queue, the description is accurately reported as `P1-5-g<hash>` instead and the traversal order is:

Instead of commit date heuristics, use ancestry as the sort constraint. This also fixes one expect-failure test case as well. However, the performance depends on having a `git commit-graph` available.

Reported-in: <ZNffWAgldUZdpQcr@farprobe>
---
 builtin/describe.c  | 20 +++++++++++++++++++-
 t/t6120-describe.sh |  2 +-
 2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/builtin/describe.c b/builtin/describe.c
index ffaf8d9f0a..789586e5a5 100644
--- a/builtin/describe.c
+++ b/builtin/describe.c
@@ -3,6 +3,7 @@
 
 #include "builtin.h"
 #include "config.h"
+#include "commit-reach.h"
 #include "environment.h"
 #include "gettext.h"
 #include "hex.h"
@@ -256,7 +257,23 @@ struct lazy_queue {
 	bool get_pending;
 };
 
-#define LAZY_QUEUE_INIT { { compare_commits_by_commit_date }, false }
+/*
+ * Topological comparison: always return parents before children.
+ * This is reverse topological order: children before parents.
+ */
+static int compare_commits_topo(const void *a_, const void *b_, void *_unused_ UNUSED)
+{
+	struct commit *a = (struct commit *)a_;
+	struct commit *b = (struct commit *)b_;
+	if (repo_is_descendant_of(the_repository, a, &(struct commit_list){ b, NULL }))
+		return -1; // a is descendant, so comes before b
+	if (repo_is_descendant_of(the_repository, b, &(struct commit_list){ a, NULL }))
+		return 1; // b is descendant, so comes before a
+	// fallback: order by hash for determinism
+	return oidcmp(&a->object.oid, &b->object.oid);
+}
+
+#define LAZY_QUEUE_INIT { { compare_commits_topo }, false }
 
 static void *lazy_queue_get(struct lazy_queue *queue)
 {
@@ -413,6 +430,7 @@ static void describe_commit(struct commit *cmit, struct strbuf *dst)
 		struct commit_list *parents = c->parents;
 		struct commit_name **slot;
 
+		fprintf(stderr, "\n\nlooking at commit %s\n", oid_to_hex(&c->object.oid));
 		seen_commits++;
 
 		if (match_cnt == max_candidates ||
diff --git a/t/t6120-describe.sh b/t/t6120-describe.sh
index 2c70cc561a..36e1b9d848 100755
--- a/t/t6120-describe.sh
+++ b/t/t6120-describe.sh
@@ -711,7 +711,7 @@ test_expect_success 'setup: describe commits with disjoint bases 2' '
 '
 
 check_describe -C disjoint2 "B-3-gHASH" HEAD
-check_describe -C disjoint2 --expect-failure "B-3-gHASH" --candidates=2 HEAD
+check_describe -C disjoint2 "B-3-gHASH" --candidates=2 HEAD
 
 test_expect_success 'setup misleading taggerdates' '
 	GIT_COMMITTER_DATE="2006-12-12 12:31" git tag -a -m "another tag" newer-tag-older-commit unique-file~1
-- 
2.51.1
Jeff King· Nov 20, 2025, 08:05 UTC · re: 'Ben Boeckel' · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Wed, Nov 19, 2025 at 09:48:52PM -0500, 'Ben Boeckel' wrote:
Show 6 quoted lines
> So I finally found some time to go back to this. The actual fix is
> actually rather easy (patch attached). However, as guessed at previously
> in the thread, the performance is in the tank without an up-to-date
> commit graph ("instant" with it versus "minutes" without). On the other
> hand, it is *accurate*. It does fix one expect-fail test case already in
> the test suite (also included in the patch).
Minutes? Yikes. Let's look...
Show 15 quoted lines
> +/*
> + * Topological comparison: always return parents before children.
> + * This is reverse topological order: children before parents.
> + */
> +static int compare_commits_topo(const void *a_, const void *b_, void *_unused_ UNUSED)
> +{
> +	struct commit *a = (struct commit *)a_;
> +	struct commit *b = (struct commit *)b_;
> +	if (repo_is_descendant_of(the_repository, a, &(struct commit_list){ b, NULL }))
> +		return -1; // a is descendant, so comes before b
> +	if (repo_is_descendant_of(the_repository, b, &(struct commit_list){ a, NULL }))
> +		return 1; // b is descendant, so comes before a
> +	// fallback: order by hash for determinism
> +	return oidcmp(&a->object.oid, &b->object.oid);
> +}

Ah. So you are doing two full traversals for each comparison. That is going to be expensive. You would do much better to walk all of history one time, marking the generation number (distance to root) of each commit, and then comparing generations here (if A has a lower generation than B, then you know that B cannot be an ancestor of A). Or if we have commit graphs, just use the generation numbers they already contain. ;)

We do all of this already for the "--topo-order" option of the revision traversal machinery. If we have commit graphs, it can output in topographical order in a streaming way (see init_topo_walk() in revision.c). If not, then we collect all of the commits up front and call sort_in_topological_order().

Sadly, git-describe does not seem to use the traversal machinery, so it is not as easy as just setting revs.topo_order. Either we have to adapt to using the regular traversal code, or those same concepts need to be applied to its custom traversal.

-Peff
'Ben Boeckel'· Feb 28, 2026, 06:11 UTC · re: Jeff King · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Thu, Nov 20, 2025 at 03:05:25 -0500, Jeff King wrote:
Show 33 quoted lines
> On Wed, Nov 19, 2025 at 09:48:52PM -0500, 'Ben Boeckel' wrote:
> 
> > So I finally found some time to go back to this. The actual fix is
> > actually rather easy (patch attached). However, as guessed at previously
> > in the thread, the performance is in the tank without an up-to-date
> > commit graph ("instant" with it versus "minutes" without). On the other
> > hand, it is *accurate*. It does fix one expect-fail test case already in
> > the test suite (also included in the patch).
> 
> Minutes? Yikes. Let's look...
> 
> > +/*
> > + * Topological comparison: always return parents before children.
> > + * This is reverse topological order: children before parents.
> > + */
> > +static int compare_commits_topo(const void *a_, const void *b_, void *_unused_ UNUSED)
> > +{
> > +	struct commit *a = (struct commit *)a_;
> > +	struct commit *b = (struct commit *)b_;
> > +	if (repo_is_descendant_of(the_repository, a, &(struct commit_list){ b, NULL }))
> > +		return -1; // a is descendant, so comes before b
> > +	if (repo_is_descendant_of(the_repository, b, &(struct commit_list){ a, NULL }))
> > +		return 1; // b is descendant, so comes before a
> > +	// fallback: order by hash for determinism
> > +	return oidcmp(&a->object.oid, &b->object.oid);
> > +}
> 
> Ah. So you are doing two full traversals for each comparison. That is
> going to be expensive. You would do much better to walk all of history
> one time, marking the generation number (distance to root) of each
> commit, and then comparing generations here (if A has a lower generation
> than B, then you know that B cannot be an ancestor of A). Or if we have
> commit graphs, just use the generation numbers they already contain. ;)
Ok, so it sounds like I should, in `describe_commit`:
- check if commit graphs are enabled (and verified?): if so, use their
  generation numbers
- if they're not enabled, perform a local walk to store a generation
  number (somewhere?) that is `max(cmit->parents[].generation) + 1`
  (however the `generation` is stored)

and then in the comparator, use this to exclude one of the comparisons at least. However…

Show 5 quoted lines
> We do all of this already for the "--topo-order" option of the revision
> traversal machinery. If we have commit graphs, it can output in
> topographical order in a streaming way (see init_topo_walk() in
> revision.c). If not, then we collect all of the commits up front and
> call sort_in_topological_order().
The key here seems to be:
	if (revs->topo_order && !generation_numbers_enabled(the_repository))
		revs->limited = 1;
which then goes down the `sort_in_topological_order` path.
> Sadly, git-describe does not seem to use the traversal machinery, so it
> is not as easy as just setting revs.topo_order. Either we have to adapt
> to using the regular traversal code, or those same concepts need to be
> applied to its custom traversal.

I suppose I can try to convert it over to a proper walk following `MyFirstObjectWalk.adoc` if that is a more fruitful path than the above ideas. As long as all children of a commit are walked before the commit itself, it should slot into the existing bookkeeping fairly well.

Thanks,
--Ben
'Ben Boeckel'· Sep 22, 2023, 18:41 UTC · re: Junio C Hamano · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 10:51:59 -0700, Junio C Hamano wrote:
Show 19 quoted lines
> <rsbecker@nexbridge.com> writes:
> 
> > There appears to be a merge at 446120fd88 which brings v9.3.0.rc0 closer to HEAD than v9.3.0.rc1.
> 
> I didn't look at the actual graph but let me say I trust you ;-)
> 
> I wonder if there should be an obvious "explain why you gave this
> name" mode added to the command, though.  The command should be able
> to say "The closest path from HEAD to any tag is via this, that, and
> that commit, which is N hops to tag T0", and from there, the user
> should be able to say "Oh, I thought T1 was closer, let me try again
> to describe HEAD, limiting the candidate only to T1" and run the
> command in that mode, which should be able to say "The closest path
> from HEAD to any tag that is allowed as a candidate is via these
> commits, which is M hops to tag T1".  And if M is smaller than N,
> then that may deserve to trigger a bug report (but as you said,
> there are rules like preferring annotated over unannotated tags
> involved, so it may not as straight-forward as comparing the two
> integer hop counts).

The thing is that the count is what is wrong here, so the determination of what is "closer" is wrong. Any explanation would say things like "commit X~10 is not part of X".

--Ben
'Ben Boeckel'· Sep 23, 2023, 12:32 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 13:14:30 -0400, rsbecker@nexbridge.com wrote:
> There appears to be a merge at 446120fd88 which brings v9.3.0.rc0
> closer to HEAD than v9.3.0.rc1.

I'll also note that `.rc0` was added as a fix for the situation of `.rc1` not being found properly. Without that, it finds `v9.2.6` as the "closest" tag.

--Ben
Kristoffer Haugsbakk· Sep 22, 2023, 17:11 UTC · re: rsbecker@nexbridge.com · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023, at 18:13, rsbecker@nexbridge.com wrote:
Show 11 quoted lines
> On Friday, September 22, 2023 11:40 AM, Ben Boeckel wrote:
>>On Sat, Aug 12, 2023 at 15:36:56 -0400, Ben Boeckel wrote:
>>> I found an issue where `git describe` doesn't find a "closer" tag than
>>> another tag as the correct one to base the description off of. I have
>>> a reproducer, but I'll first give details of the real world issue.
>>
>>Bump. Can anyone provide guidance as to what the best solution to this might be?
>
> Can you provide details? `git describe` is sensitive to --first-parent
> and whether the tag has annotations.
> --Randall
Both of the tags (`v9.3.0.rc0` and `v9.3.0.rc1`) are annotated ones.
-- 
Kristoffer Haugsbakk
Kristoffer Haugsbakk· Sep 22, 2023, 17:35 UTC · re: Ben Boeckel · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

Looks related:
Link: https://public-inbox.org/git/CABPp-BH2zuYe87xhjdp5v7M7i+EfEgLHAZgwfzJUAxGk1CFgfA@mail.gmail.com/
Message-ID: CABPp-BH2zuYe87xhjdp5v7M7i+EfEgLHAZgwfzJUAxGk1CFgfA@mail.gmail.com
Via: https://stackoverflow.com/questions/72886894/git-describe-is-not-returning-the-expected-tag
-- 
Kristoffer Haugsbakk
'Ben Boeckel'· Sep 22, 2023, 17:43 UTC · re: Kristoffer Haugsbakk · lore

Re: [BUG] `git describe` doesn't traverse the graph in topological order

On Fri, Sep 22, 2023 at 19:35:01 +0200, Kristoffer Haugsbakk wrote:
Show 5 quoted lines
> Looks related:
> 
> Link: https://public-inbox.org/git/CABPp-BH2zuYe87xhjdp5v7M7i+EfEgLHAZgwfzJUAxGk1CFgfA@mail.gmail.com/
> Message-ID: CABPp-BH2zuYe87xhjdp5v7M7i+EfEgLHAZgwfzJUAxGk1CFgfA@mail.gmail.com
> Via: https://stackoverflow.com/questions/72886894/git-describe-is-not-returning-the-expected-tag

Thanks. It seems that these discussions previously determined the same (painful) pill:

SZEDER Gábor at https://lore.kernel.org/git/20191008123156.GG11529@szeder.dev/:
    I think the proper way to fix this issue would be to make 'git
    describe' traverse the history in topographical order.  Alas, I'm
    afraid this would result in a noticable performance penalty on big
    histories without a commit graph.

The `sleep 1` is probably the remedy we'll use if time to actually fix this doesn't come up (or the "proper" fix is deemed as "too expensive").

Thanks for the links,
--Ben

← back to recent threads