# [PATCH] doc/cat-file: allow --use-mailmap for --batch options 13 messages from 2022-09-23 to 2022-11-13. Participants: Siddharth Asthana, Christian Couder, John Cai, Junio C Hamano, Taylor Blau. Thread: https://gitlist.dev/t/58505 ## Siddharth Asthana, 2022-09-23 19:35 Subject: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: <20220923193543.58635-1-siddharthasthana31@gmail.com> URL: https://gitlist.dev/e/20220923193543.58635-1-siddharthasthana31%40gmail.com ``` The command git cat-file can now use the mailmap mechanism to replace idents with their canonical versions for commit and tag objects. There are several options like `--batch`, `--batch-check` and `--batch-command` that can be combined with `--use-mailmap`. But, the documentation for `--batch`, `--batch-check` and `--batch-command` doesn't say so. This patch fixes that documentation. Mentored-by: Christian Couder's avatarChristian Couder Mentored-by: John Cai's avatarJohn Cai Signed-off-by: Siddharth Asthana --- Documentation/git-cat-file.txt | 44 ++++++++++++++++++++++++---------- 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index ec30b5c574..3fdafc07ce 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -89,26 +89,44 @@ OPTIONS --batch:: --batch=:: Print object information and contents for each object provided - on stdin. May not be combined with any other options or arguments - except `--textconv` or `--filters`, in which case the input lines - also need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + on stdin. + + * When used with `--textconv` or `--filters`, the input lines + must specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + * When used with `--use-mailmap`, the info command shows the size + the object, if the idents recorded in it were the ones "corrected" + by the mailmap mechanism. + Cannot be used with any other options. --batch-check:: --batch-check=:: - Print object information for each object provided on stdin. May - not be combined with any other options or arguments except - `--textconv` or `--filters`, in which case the input lines also - need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + Print object information for each object provided on stdin. + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + * When used with `--use-mailmap`, the info command shows the size + the object, if the idents recorded in it were the ones "corrected" + by the mailmap mechanism. + Cannot be used with any other options. --batch-command:: --batch-command=:: Enter a command mode that reads commands and arguments from stdin. May - only be combined with `--buffer`, `--textconv` or `--filters`. In the - case of `--textconv` or `--filters`, the input lines also need to specify - the path, separated by whitespace. See the section `BATCH OUTPUT` below - for details. + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or + `--filters`. + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + * When used with `--use-mailmap`, the info command shows the size the + object, if the idents recorded in it were the ones "corrected" by the + mailmap mechanism. + + `--batch-command` recognizes the following commands: + -- 2.38.0.rc1.3.g2cb248e00d.dirty ``` ## Christian Couder, 2022-09-24 14:49 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/CAP8UFD245ebv95f8bvN9YqPtv1c%2BPa4xzAmY_mixs3nrdSdGvA%40mail.gmail.com In-Reply-To: <20220923193543.58635-1-siddharthasthana31@gmail.com> ``` On Fri, Sep 23, 2022 at 9:36 PM Siddharth Asthana wrote: > > The command git cat-file can now use the mailmap mechanism to replace > idents with their canonical versions for commit and tag objects. There > are several options like `--batch`, `--batch-check` and > `--batch-command` that can be combined with `--use-mailmap`. But, the > documentation for `--batch`, `--batch-check` and `--batch-command` > doesn't say so. This patch fixes that documentation. > > Mentored-by: Christian Couder's avatarChristian Couder > Mentored-by: John Cai's avatarJohn Cai As you told me separately, you should remove "Christian Couder's avatar" and "John Cai's avatar" from the above trailers. > Signed-off-by: Siddharth Asthana > --- Here after the line that contains only '---' and before the short stats below, you could write some small explanations about where this patch comes from. For example you could say that it was previously sent as the first patch of a a 3 patch series: https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ And you could tell what changes you made compared to the previous patch. > Documentation/git-cat-file.txt | 44 ++++++++++++++++++++++++---------- > 1 file changed, 31 insertions(+), 13 deletions(-) > > diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt > index ec30b5c574..3fdafc07ce 100644 > --- a/Documentation/git-cat-file.txt > +++ b/Documentation/git-cat-file.txt > @@ -89,26 +89,44 @@ OPTIONS > --batch:: > --batch=:: > Print object information and contents for each object provided > - on stdin. May not be combined with any other options or arguments > - except `--textconv` or `--filters`, in which case the input lines > - also need to specify the path, separated by whitespace. See the > - section `BATCH OUTPUT` below for details. > + on stdin. > + > + * When used with `--textconv` or `--filters`, the input lines > + must specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + > + * When used with `--use-mailmap`, the info command shows the size > + the object, if the idents recorded in it were the ones "corrected" > + by the mailmap mechanism. > + Cannot be used with any other options. Have you checked the result of `git help cat-file` after `make instll-doc`? Shouldn't you use something like the following instead for additional paragraphs inside some indented text: + * When used with `--textconv` or `--filters`, the input lines must specify the path, separated by whitespace. See the section `BATCH OUTPUT` below for details. + ? (Note that the + signs in what I suggest above should be actually added to the file and aren't what a diff displays in front of new lines.) Also it's not very clear if "Cannot be used with any other options." is part of the last "* When ..." paragraph or not. ``` ## Siddharth Asthana, 2022-09-26 09:14 Subject: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: <20220926091442.222876-1-siddharthasthana31@gmail.com> URL: https://gitlist.dev/e/20220926091442.222876-1-siddharthasthana31%40gmail.com In-Reply-To: <20220923193543.58635-1-siddharthasthana31@gmail.com> ``` The command git cat-file can now use the mailmap mechanism to replace idents with their canonical versions for commit and tag objects. There are several options like `--batch`, `--batch-check` and `--batch-command` that can be combined with `--use-mailmap`. But, the documentation for `--batch`, `--batch-check` and `--batch-command` doesn't say so. This patch fixes that documentation. Mentored-by: Christian Couder Mentored-by: John Cai Signed-off-by: Siddharth Asthana --- This patch was previously sent as the first patch of a 3 patch series for adding the mailmap support in git cat-file options: https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ Changes in v2: - Fixed the names in trailers in the commit message - Updated the documentation to clearly state that the `--batch-check`, `--batch-command` and `--batch` options can only be used with `--textconv`, `--filters` or `--use-mailmap`. - Fixed formating Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- 1 file changed, 32 insertions(+), 13 deletions(-) diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index ec30b5c574..2a8f050a29 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -89,26 +89,45 @@ OPTIONS --batch:: --batch=:: Print object information and contents for each object provided - on stdin. May not be combined with any other options or arguments - except `--textconv` or `--filters`, in which case the input lines - also need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + on stdin. May not be combined with any other options or arguments + except --textconv, --filters or --use-mailmap. + + + * When used with `--textconv` or `--filters`, the input lines + must specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + the object, if the idents recorded in it were the ones "corrected" + by the mailmap mechanism. --batch-check:: --batch-check=:: - Print object information for each object provided on stdin. May - not be combined with any other options or arguments except - `--textconv` or `--filters`, in which case the input lines also - need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + Print object information for each object provided on stdin. May not be + combined with any other options or arguments except --textconv, --filters + or --use-mailmap. + + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + the object, if the idents recorded in it were the ones "corrected" + by the mailmap mechanism. --batch-command:: --batch-command=:: Enter a command mode that reads commands and arguments from stdin. May - only be combined with `--buffer`, `--textconv` or `--filters`. In the - case of `--textconv` or `--filters`, the input lines also need to specify - the path, separated by whitespace. See the section `BATCH OUTPUT` below - for details. + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or + `--filters`. + + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size the + object, if the idents recorded in it were the ones "corrected" by the + mailmap mechanism. + + `--batch-command` recognizes the following commands: + -- 2.38.0.rc1.4.g29ac4cf309.dirty ``` ## John Cai, 2022-09-26 14:11 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: <750BA887-BECB-471D-8BB2-0B321778F376@gmail.com> URL: https://gitlist.dev/e/750BA887-BECB-471D-8BB2-0B321778F376%40gmail.com In-Reply-To: <20220926091442.222876-1-siddharthasthana31@gmail.com> ``` Hi Siddarth, On 26 Sep 2022, at 5:14, Siddharth Asthana wrote: > The command git cat-file can now use the mailmap mechanism to replace > idents with their canonical versions for commit and tag objects. There > are several options like `--batch`, `--batch-check` and > `--batch-command` that can be combined with `--use-mailmap`. But, the > documentation for `--batch`, `--batch-check` and `--batch-command` > doesn't say so. This patch fixes that documentation. > > Mentored-by: Christian Couder > Mentored-by: John Cai > Signed-off-by: Siddharth Asthana > --- > > This patch was previously sent as the first patch of a 3 patch series for > adding the mailmap support in git cat-file options: > https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ > > Changes in v2: > - Fixed the names in trailers in the commit message > - Updated the documentation to clearly state that the `--batch-check`, > `--batch-command` and `--batch` options can only be used with > `--textconv`, `--filters` or `--use-mailmap`. > - Fixed formating > > Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- > 1 file changed, 32 insertions(+), 13 deletions(-) > > diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt > index ec30b5c574..2a8f050a29 100644 > --- a/Documentation/git-cat-file.txt > +++ b/Documentation/git-cat-file.txt > @@ -89,26 +89,45 @@ OPTIONS > --batch:: > --batch=:: > Print object information and contents for each object provided > - on stdin. May not be combined with any other options or arguments > - except `--textconv` or `--filters`, in which case the input lines > - also need to specify the path, separated by whitespace. See the > - section `BATCH OUTPUT` below for details. > + on stdin. May not be combined with any other options or arguments > + except --textconv, --filters or --use-mailmap. except --textconv, --filters, or --use-mailmap. > + + > + * When used with `--textconv` or `--filters`, the input lines > + must specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + + > + * When used with `--use-mailmap`, the info command shows the size > + the object, if the idents recorded in it were the ones "corrected" > + by the mailmap mechanism. When used with `--use-mailmap`, the info command shows the size the object if the identities recorded in it were replaced by the mailmap mechanism. > > --batch-check:: > --batch-check=:: > - Print object information for each object provided on stdin. May > - not be combined with any other options or arguments except > - `--textconv` or `--filters`, in which case the input lines also > - need to specify the path, separated by whitespace. See the > - section `BATCH OUTPUT` below for details. > + Print object information for each object provided on stdin. May not be > + combined with any other options or arguments except --textconv, --filters > + or --use-mailmap. > + + > + * When used with `--textconv` or `--filters`, the input lines must > + specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + + > + * When used with `--use-mailmap`, the info command shows the size > + the object, if the idents recorded in it were the ones "corrected" > + by the mailmap mechanism. Same as above > --batch-command:: > --batch-command=:: > Enter a command mode that reads commands and arguments from stdin. May > - only be combined with `--buffer`, `--textconv` or `--filters`. In the > - case of `--textconv` or `--filters`, the input lines also need to specify > - the path, separated by whitespace. See the section `BATCH OUTPUT` below > - for details. > + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or > + `--filters`. > + + > + * When used with `--textconv` or `--filters`, the input lines must > + specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + + > + * When used with `--use-mailmap`, the info command shows the size the > + object, if the idents recorded in it were the ones "corrected" by the > + mailmap mechanism. Same as above > + > + > `--batch-command` recognizes the following commands: > + > -- > 2.38.0.rc1.4.g29ac4cf309.dirty thanks! ``` ## Siddharth Asthana, 2022-10-21 10:32 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/ad579a6c-8a3b-c226-54e4-b8bcef4930ac%40gmail.com In-Reply-To: <750BA887-BECB-471D-8BB2-0B321778F376@gmail.com> ``` On 26/09/22 19:41, John Cai wrote: > Hi Siddarth, > > On 26 Sep 2022, at 5:14, Siddharth Asthana wrote: > >> The command git cat-file can now use the mailmap mechanism to replace >> idents with their canonical versions for commit and tag objects. There >> are several options like `--batch`, `--batch-check` and >> `--batch-command` that can be combined with `--use-mailmap`. But, the >> documentation for `--batch`, `--batch-check` and `--batch-command` >> doesn't say so. This patch fixes that documentation. >> >> Mentored-by: Christian Couder >> Mentored-by: John Cai >> Signed-off-by: Siddharth Asthana >> --- >> >> This patch was previously sent as the first patch of a 3 patch series for >> adding the mailmap support in git cat-file options: >> https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ >> >> Changes in v2: >> - Fixed the names in trailers in the commit message >> - Updated the documentation to clearly state that the `--batch-check`, >> `--batch-command` and `--batch` options can only be used with >> `--textconv`, `--filters` or `--use-mailmap`. >> - Fixed formating >> >> Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- >> 1 file changed, 32 insertions(+), 13 deletions(-) >> >> diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt >> index ec30b5c574..2a8f050a29 100644 >> --- a/Documentation/git-cat-file.txt >> +++ b/Documentation/git-cat-file.txt >> @@ -89,26 +89,45 @@ OPTIONS >> --batch:: >> --batch=:: >> Print object information and contents for each object provided >> - on stdin. May not be combined with any other options or arguments >> - except `--textconv` or `--filters`, in which case the input lines >> - also need to specify the path, separated by whitespace. See the >> - section `BATCH OUTPUT` below for details. >> + on stdin. May not be combined with any other options or arguments >> + except --textconv, --filters or --use-mailmap. > > except --textconv, --filters, or --use-mailmap. > >> + + >> + * When used with `--textconv` or `--filters`, the input lines >> + must specify the path, separated by whitespace. See the section >> + `BATCH OUTPUT` below for details. >> + + >> + * When used with `--use-mailmap`, the info command shows the size >> + the object, if the idents recorded in it were the ones "corrected" >> + by the mailmap mechanism. > > When used with `--use-mailmap`, the info command shows the size > the object if the identities recorded in it were replaced > by the mailmap mechanism. > >> >> --batch-check:: >> --batch-check=:: >> - Print object information for each object provided on stdin. May >> - not be combined with any other options or arguments except >> - `--textconv` or `--filters`, in which case the input lines also >> - need to specify the path, separated by whitespace. See the >> - section `BATCH OUTPUT` below for details. >> + Print object information for each object provided on stdin. May not be >> + combined with any other options or arguments except --textconv, --filters >> + or --use-mailmap. >> + + >> + * When used with `--textconv` or `--filters`, the input lines must >> + specify the path, separated by whitespace. See the section >> + `BATCH OUTPUT` below for details. >> + + >> + * When used with `--use-mailmap`, the info command shows the size >> + the object, if the idents recorded in it were the ones "corrected" >> + by the mailmap mechanism. > > Same as above > >> --batch-command:: >> --batch-command=:: >> Enter a command mode that reads commands and arguments from stdin. May >> - only be combined with `--buffer`, `--textconv` or `--filters`. In the >> - case of `--textconv` or `--filters`, the input lines also need to specify >> - the path, separated by whitespace. See the section `BATCH OUTPUT` below >> - for details. >> + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or >> + `--filters`. >> + + >> + * When used with `--textconv` or `--filters`, the input lines must >> + specify the path, separated by whitespace. See the section >> + `BATCH OUTPUT` below for details. >> + + >> + * When used with `--use-mailmap`, the info command shows the size the >> + object, if the idents recorded in it were the ones "corrected" by the >> + mailmap mechanism. > > Same as above > >> + >> + >> `--batch-command` recognizes the following commands: >> + >> -- >> 2.38.0.rc1.4.g29ac4cf309.dirty > > thanks! Thanks a lot for the review John! Will make the suggested changes and send the v3 patch. ``` ## Siddharth Asthana, 2022-10-21 10:34 Subject: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: <20221021103442.202759-1-siddharthasthana31@gmail.com> URL: https://gitlist.dev/e/20221021103442.202759-1-siddharthasthana31%40gmail.com In-Reply-To: <20220923193543.58635-1-siddharthasthana31@gmail.com> ``` The command git cat-file can now use the mailmap mechanism to replace idents with their canonical versions for commit and tag objects. There are several options like `--batch`, `--batch-check` and `--batch-command` that can be combined with `--use-mailmap`. But, the documentation for `--batch`, `--batch-check` and `--batch-command` doesn't say so. This patch fixes that documentation. Mentored-by: Christian Couder Mentored-by: John Cai Signed-off-by: Siddharth Asthana --- This patch was previously sent as the first patch of a 3 patch series for adding the mailmap support in git cat-file options: https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ Changes in v2: - Fixed the names in trailers in the commit message - Updated the documentation to clearly state that the `--batch-check`, `--batch-command` and `--batch` options can only be used with `--textconv`, `--filters` or `--use-mailmap`. - Fixed formatting Changes in v3: - Fixed formatting Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- 1 file changed, 32 insertions(+), 13 deletions(-) diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index ec30b5c574..e2a179770c 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -89,26 +89,45 @@ OPTIONS --batch:: --batch=:: Print object information and contents for each object provided - on stdin. May not be combined with any other options or arguments - except `--textconv` or `--filters`, in which case the input lines - also need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + on stdin. May not be combined with any other options or arguments + except --textconv, --filters, or --use-mailmap. + + + * When used with `--textconv` or `--filters`, the input lines + must specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + the object if the identities recorded in it were replaced + by the mailmap mechanism. --batch-check:: --batch-check=:: - Print object information for each object provided on stdin. May - not be combined with any other options or arguments except - `--textconv` or `--filters`, in which case the input lines also - need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + Print object information for each object provided on stdin. May not be + combined with any other options or arguments except --textconv, --filters + or --use-mailmap. + + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + the object if the identities recorded in it were replaced + by the mailmap mechanism. --batch-command:: --batch-command=:: Enter a command mode that reads commands and arguments from stdin. May - only be combined with `--buffer`, `--textconv` or `--filters`. In the - case of `--textconv` or `--filters`, the input lines also need to specify - the path, separated by whitespace. See the section `BATCH OUTPUT` below - for details. + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or + `--filters`. + + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + the object if the identities recorded in it were replaced + by the mailmap mechanism. + + `--batch-command` recognizes the following commands: + -- 2.38.0.84.g1cc2920221 ``` ## Junio C Hamano, 2022-10-21 18:56 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/xmqqk04tj99k.fsf%40gitster.g In-Reply-To: <20221021103442.202759-1-siddharthasthana31@gmail.com> ``` Siddharth Asthana writes: > Changes in v3: > - Fixed formatting This seems to format well, both with AsciiDoc and Asciidoctor. > - on stdin. May not be combined with any other options or arguments > - except `--textconv` or `--filters`, in which case the input lines > - also need to specify the path, separated by whitespace. See the > - section `BATCH OUTPUT` below for details. > + on stdin. May not be combined with any other options or arguments Unnecessary change here, but I'll let it pass this time. > + except --textconv, --filters, or --use-mailmap. > + + > + * When used with `--textconv` or `--filters`, the input lines > + must specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. OK. > + + > + * When used with `--use-mailmap`, the info command shows the size > + the object if the identities recorded in it were replaced > + by the mailmap mechanism. Did you mean "the object as if the identities ... were replaced"? All three comments equally apply to the other two hunks for --batch-check and --batch-command. Thanks. ``` ## Siddharth Asthana, 2022-10-29 09:25 Subject: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: <20221029092513.73982-1-siddharthasthana31@gmail.com> URL: https://gitlist.dev/e/20221029092513.73982-1-siddharthasthana31%40gmail.com In-Reply-To: <20220923193543.58635-1-siddharthasthana31@gmail.com> ``` The command git cat-file can now use the mailmap mechanism to replace idents with their canonical versions for commit and tag objects. There are several options like `--batch`, `--batch-check` and `--batch-command` that can be combined with `--use-mailmap`. But, the documentation for `--batch`, `--batch-check` and `--batch-command` doesn't say so. This patch fixes that documentation. Mentored-by: Christian Couder Mentored-by: John Cai Signed-off-by: Siddharth Asthana --- This patch was previously sent as the first patch of a 3 patch series for adding the mailmap support in git cat-file options: https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ Changes in v2: - Fixed the names in trailers in the commit message - Updated the documentation to clearly state that the `--batch-check`, `--batch-command` and `--batch` options can only be used with `--textconv`, `--filters` or `--use-mailmap`. - Fixed formatting Changes in v3: - Fixed formatting Changes in v4: - Fixed some grammatical errors Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- 1 file changed, 32 insertions(+), 13 deletions(-) diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt index ec30b5c574..db2bba9b65 100644 --- a/Documentation/git-cat-file.txt +++ b/Documentation/git-cat-file.txt @@ -89,26 +89,45 @@ OPTIONS --batch:: --batch=:: Print object information and contents for each object provided - on stdin. May not be combined with any other options or arguments - except `--textconv` or `--filters`, in which case the input lines - also need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + on stdin. May not be combined with any other options or arguments + except --textconv, --filters, or --use-mailmap. + + + * When used with `--textconv` or `--filters`, the input lines + must specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + of the object as if the identities recorded in it were replaced + by the mailmap mechanism. --batch-check:: --batch-check=:: - Print object information for each object provided on stdin. May - not be combined with any other options or arguments except - `--textconv` or `--filters`, in which case the input lines also - need to specify the path, separated by whitespace. See the - section `BATCH OUTPUT` below for details. + Print object information for each object provided on stdin. May not be + combined with any other options or arguments except --textconv, --filters + or --use-mailmap. + + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + of the object as if the identities recorded in it were replaced + by the mailmap mechanism. --batch-command:: --batch-command=:: Enter a command mode that reads commands and arguments from stdin. May - only be combined with `--buffer`, `--textconv` or `--filters`. In the - case of `--textconv` or `--filters`, the input lines also need to specify - the path, separated by whitespace. See the section `BATCH OUTPUT` below - for details. + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or + `--filters`. + + + * When used with `--textconv` or `--filters`, the input lines must + specify the path, separated by whitespace. See the section + `BATCH OUTPUT` below for details. + + + * When used with `--use-mailmap`, the info command shows the size + of the object as if the identities recorded in it were replaced + by the mailmap mechanism. + + `--batch-command` recognizes the following commands: + -- 2.38.1.281.g0b8e165806.dirty ``` ## Taylor Blau, 2022-10-29 18:06 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/Y11rnKwuR0q47ngq%40nand.local In-Reply-To: <20221029092513.73982-1-siddharthasthana31@gmail.com> ``` Hi Siddharth, On Sat, Oct 29, 2022 at 02:55:13PM +0530, Siddharth Asthana wrote: > This patch was previously sent as the first patch of a 3 patch series for > adding the mailmap support in git cat-file options: > https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ Why was this split off from the original series? I don't have a problem queueing the two topics independently, but an explanation of how the two interact would be appreciated. E.g., does one depend on the other? Are they independent and can be merged at will? Should the integrator expect merge conflicts? Thanks, Taylor ``` ## Christian Couder, 2022-10-30 07:06 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/CAP8UFD3J3Q4UTGo5aaDDVth1hXLXAt53322z3TSNWTVRNiJ8Xg%40mail.gmail.com In-Reply-To: ``` Hi Taylor, On Sat, Oct 29, 2022 at 8:06 PM Taylor Blau wrote: > > Hi Siddharth, > > On Sat, Oct 29, 2022 at 02:55:13PM +0530, Siddharth Asthana wrote: > > This patch was previously sent as the first patch of a 3 patch series for > > adding the mailmap support in git cat-file options: > > https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ > > Why was this split off from the original series? I don't have a problem > queueing the two topics independently, but an explanation of how the two > interact would be appreciated. I think it was split off from the original series because it's a documentation fix that could hopefully have graduated faster, and could perhaps have made it into v2.38.0. Or perhaps it could make it in v2.38.2 if such a bug fix release is made. > E.g., does one depend on the other? Are they independent and can be > merged at will? Should the integrator expect merge conflicts? The other patch series has some code changes that are independent, but the documentation changes it makes should probably go on top of this. Thanks, Christian. ``` ## Taylor Blau, 2022-10-30 18:07 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/Y169Zbtvr33rBQvc%40nand.local In-Reply-To: ``` On Sun, Oct 30, 2022 at 08:06:19AM +0100, Christian Couder wrote: > > Why was this split off from the original series? I don't have a problem > > queueing the two topics independently, but an explanation of how the two > > interact would be appreciated. > > I think it was split off from the original series because it's a > documentation fix that could hopefully have graduated faster, and > could perhaps have made it into v2.38.0. Or perhaps it could make it > in v2.38.2 if such a bug fix release is made. OK. Can we please get an updated round that clearly indicates which version it is? There are several messages in this thread with the same subject line and it is unclear which one reviewers are happy with. Thanks, Taylor ``` ## Christian Couder, 2022-10-31 10:54 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/CAP8UFD2vLnE8Suf259RWQk2fcq%2BgDFTi%2BcDr9mrbidY49n3Lzw%40mail.gmail.com In-Reply-To: <20221029092513.73982-1-siddharthasthana31@gmail.com> ``` On Sat, Oct 29, 2022 at 11:25 AM Siddharth Asthana wrote: > > The command git cat-file can now use the mailmap mechanism to replace > idents with their canonical versions for commit and tag objects. There > are several options like `--batch`, `--batch-check` and > `--batch-command` that can be combined with `--use-mailmap`. But, the > documentation for `--batch`, `--batch-check` and `--batch-command` > doesn't say so. This patch fixes that documentation. > > Mentored-by: Christian Couder > Mentored-by: John Cai > Signed-off-by: Siddharth Asthana > --- > > This patch was previously sent as the first patch of a 3 patch series for > adding the mailmap support in git cat-file options: > https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ I think Taylor is probably right that there should be a version number at the start of the subject line if the patch has already been sent many times with the same subject and mostly the same content to the list. > Changes in v2: > - Fixed the names in trailers in the commit message > - Updated the documentation to clearly state that the `--batch-check`, > `--batch-command` and `--batch` options can only be used with > `--textconv`, `--filters` or `--use-mailmap`. > - Fixed formatting > > Changes in v3: > - Fixed formatting > > Changes in v4: > - Fixed some grammatical errors The version number should logically be "v4" according to the above. > Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- > 1 file changed, 32 insertions(+), 13 deletions(-) > > diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt > index ec30b5c574..db2bba9b65 100644 > --- a/Documentation/git-cat-file.txt > +++ b/Documentation/git-cat-file.txt > @@ -89,26 +89,45 @@ OPTIONS > --batch:: > --batch=:: > Print object information and contents for each object provided > - on stdin. May not be combined with any other options or arguments > - except `--textconv` or `--filters`, in which case the input lines > - also need to specify the path, separated by whitespace. See the > - section `BATCH OUTPUT` below for details. > + on stdin. May not be combined with any other options or arguments > + except --textconv, --filters, or --use-mailmap. > + + > + * When used with `--textconv` or `--filters`, the input lines > + must specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + + > + * When used with `--use-mailmap`, the info command shows the size > + of the object as if the identities recorded in it were replaced > + by the mailmap mechanism. Sorry to realize this only at this point but actually I think the `info` command is only available when the `--batch-command` option is used, not when the `--batch` option is used. As the `--batch` option prints both object information (which includes the size) and contents (which includes the idents), I think something like the following should be used here: * When used with `--use-mailmap`, for commit and tag objects, the contents part of the output shows the identities replaced using the mailmap mechanism, while the information part of the output shows the size of the object as if it actually recorded the replacement identities. > --batch-check:: > --batch-check=:: > - Print object information for each object provided on stdin. May > - not be combined with any other options or arguments except > - `--textconv` or `--filters`, in which case the input lines also > - need to specify the path, separated by whitespace. See the > - section `BATCH OUTPUT` below for details. > + Print object information for each object provided on stdin. May not be > + combined with any other options or arguments except --textconv, --filters > + or --use-mailmap. > + + > + * When used with `--textconv` or `--filters`, the input lines must > + specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + + > + * When used with `--use-mailmap`, the info command shows the size > + of the object as if the identities recorded in it were replaced > + by the mailmap mechanism. Same remark about the `info` command as above. As the `--batch-check` option prints only object information (which includes the size), I think something like the following should be used here: * When used with `--use-mailmap`, for commit and tag objects, the printed object information shows the size of the object as if the identities recorded in it were replaced by the mailmap mechanism. > --batch-command:: > --batch-command=:: > Enter a command mode that reads commands and arguments from stdin. May > - only be combined with `--buffer`, `--textconv` or `--filters`. In the > - case of `--textconv` or `--filters`, the input lines also need to specify > - the path, separated by whitespace. See the section `BATCH OUTPUT` below > - for details. > + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or > + `--filters`. > + + > + * When used with `--textconv` or `--filters`, the input lines must > + specify the path, separated by whitespace. See the section > + `BATCH OUTPUT` below for details. > + + > + * When used with `--use-mailmap`, the info command shows the size > + of the object as if the identities recorded in it were replaced > + by the mailmap mechanism. s/info command/`info` command/ And I think it could be interesting to add: - that it happens only for commits and tags, and - that when the `contents` command is used the idents are replaced. So maybe something like: * When used with `--use-mailmap`, for commit and tag objects, the `contents` command shows the identities replaced using the mailmap mechanism, while the `info` command shows the size of the object as if it actually recorded the replacement identities. Also this will become true only after your other patch series will be merged. Which means that you should say somewhere that either - this patch should be merged only after the other patch series is merged, or - it's a bug that the `info` command doesn't show the size of the updated object and this is going to be fixed soon by the other patch series anyway. Thanks for working on finishing this! Christian. ``` ## Siddharth Asthana, 2022-11-13 21:26 Subject: Re: [PATCH] doc/cat-file: allow --use-mailmap for --batch options Message-ID: URL: https://gitlist.dev/e/a446840e-7a6d-984b-ac15-f6359a18595a%40gmail.com In-Reply-To: ``` On 31/10/22 16:24, Christian Couder wrote: > On Sat, Oct 29, 2022 at 11:25 AM Siddharth Asthana > wrote: >> >> The command git cat-file can now use the mailmap mechanism to replace >> idents with their canonical versions for commit and tag objects. There >> are several options like `--batch`, `--batch-check` and >> `--batch-command` that can be combined with `--use-mailmap`. But, the >> documentation for `--batch`, `--batch-check` and `--batch-command` >> doesn't say so. This patch fixes that documentation. >> >> Mentored-by: Christian Couder >> Mentored-by: John Cai >> Signed-off-by: Siddharth Asthana >> --- >> >> This patch was previously sent as the first patch of a 3 patch series for >> adding the mailmap support in git cat-file options: >> https://lore.kernel.org/git/20220916205946.178925-2-siddharthasthana31@gmail.com/ > > I think Taylor is probably right that there should be a version number > at the start of the subject line if the patch has already been sent > many times with the same subject and mostly the same content to the > list. > >> Changes in v2: >> - Fixed the names in trailers in the commit message >> - Updated the documentation to clearly state that the `--batch-check`, >> `--batch-command` and `--batch` options can only be used with >> `--textconv`, `--filters` or `--use-mailmap`. >> - Fixed formatting >> >> Changes in v3: >> - Fixed formatting >> >> Changes in v4: >> - Fixed some grammatical errors > > The version number should logically be "v4" according to the above. > >> Documentation/git-cat-file.txt | 45 ++++++++++++++++++++++++---------- >> 1 file changed, 32 insertions(+), 13 deletions(-) >> >> diff --git a/Documentation/git-cat-file.txt b/Documentation/git-cat-file.txt >> index ec30b5c574..db2bba9b65 100644 >> --- a/Documentation/git-cat-file.txt >> +++ b/Documentation/git-cat-file.txt >> @@ -89,26 +89,45 @@ OPTIONS >> --batch:: >> --batch=:: >> Print object information and contents for each object provided >> - on stdin. May not be combined with any other options or arguments >> - except `--textconv` or `--filters`, in which case the input lines >> - also need to specify the path, separated by whitespace. See the >> - section `BATCH OUTPUT` below for details. >> + on stdin. May not be combined with any other options or arguments >> + except --textconv, --filters, or --use-mailmap. >> + + >> + * When used with `--textconv` or `--filters`, the input lines >> + must specify the path, separated by whitespace. See the section >> + `BATCH OUTPUT` below for details. >> + + >> + * When used with `--use-mailmap`, the info command shows the size >> + of the object as if the identities recorded in it were replaced >> + by the mailmap mechanism. > > Sorry to realize this only at this point but actually I think the > `info` command is only available when the `--batch-command` option is > used, not when the `--batch` option is used. > > As the `--batch` option prints both object information (which includes > the size) and contents (which includes the idents), I think something > like the following should be used here: > > * When used with `--use-mailmap`, for commit and tag objects, the > contents part of the output shows the identities replaced using the > mailmap mechanism, while the information part of the output shows > the size of the object as if it actually recorded the replacement > identities. > >> --batch-check:: >> --batch-check=:: >> - Print object information for each object provided on stdin. May >> - not be combined with any other options or arguments except >> - `--textconv` or `--filters`, in which case the input lines also >> - need to specify the path, separated by whitespace. See the >> - section `BATCH OUTPUT` below for details. >> + Print object information for each object provided on stdin. May not be >> + combined with any other options or arguments except --textconv, --filters >> + or --use-mailmap. >> + + >> + * When used with `--textconv` or `--filters`, the input lines must >> + specify the path, separated by whitespace. See the section >> + `BATCH OUTPUT` below for details. >> + + >> + * When used with `--use-mailmap`, the info command shows the size >> + of the object as if the identities recorded in it were replaced >> + by the mailmap mechanism. > > Same remark about the `info` command as above. > > As the `--batch-check` option prints only object information (which > includes the size), I think something like the following should be > used here: > > * When used with `--use-mailmap`, for commit and tag objects, the > printed object information shows the size of the object as if the > identities recorded in it were replaced by the mailmap mechanism. > >> --batch-command:: >> --batch-command=:: >> Enter a command mode that reads commands and arguments from stdin. May >> - only be combined with `--buffer`, `--textconv` or `--filters`. In the >> - case of `--textconv` or `--filters`, the input lines also need to specify >> - the path, separated by whitespace. See the section `BATCH OUTPUT` below >> - for details. >> + only be combined with `--buffer`, `--textconv`, `--use-mailmap` or >> + `--filters`. >> + + >> + * When used with `--textconv` or `--filters`, the input lines must >> + specify the path, separated by whitespace. See the section >> + `BATCH OUTPUT` below for details. >> + + >> + * When used with `--use-mailmap`, the info command shows the size >> + of the object as if the identities recorded in it were replaced >> + by the mailmap mechanism. > > s/info command/`info` command/ > > And I think it could be interesting to add: > > - that it happens only for commits and tags, and > - that when the `contents` command is used the idents are replaced. > > So maybe something like: > > * When used with `--use-mailmap`, for commit and tag objects, the > `contents` command shows the identities replaced using the > mailmap mechanism, while the `info` command shows the size > of the object as if it actually recorded the replacement > identities. > > Also this will become true only after your other patch series will be > merged. Which means that you should say somewhere that either > > - this patch should be merged only after the other patch series is merged, or > - it's a bug that the `info` command doesn't show the size of the > updated object and this is going to be fixed soon by the other patch > series anyway. > > Thanks for working on finishing this! > Christian. Thanks a ton for the review Christian :) Will make the suggested changes and send the v4 patch series. ```