Re: [PATCHv14 5/7] git submodule update: have a dedicated helper for cloning
> This introduces a new helper function in git submodule--helper
> which takes care of cloning all submodules, which we want to
> parallelize eventually.
Patches 1-4 are still
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
I still have trouble reading this patch (patch 5). Some musing below to figure out what could change to make it more readable (perhaps in a patch on top).
[...]
Show 22 quoted lines
> --- a/builtin/submodule--helper.c
> +++ b/builtin/submodule--helper.c
> @@ -255,6 +255,234 @@ static int module_clone(int argc, const char **argv, const char *prefix)
> return 0;
> }
>
> +struct submodule_update_clone {
> + /* states */
> + int count;
> + int print_unmatched;
> + /* configuration */
> + int quiet;
> + const char *reference;
> + const char *depth;
> + const char *recursive_prefix;
> + const char *prefix;
> + struct module_list list;
> + struct string_list projectlines;
> + struct submodule_update_strategy update;
> + struct pathspec pathspec;
> +};
> +#define SUBMODULE_UPDATE_CLONE_INIT {0, 0, 0, NULL, NULL, NULL, NULL, MODULE_LIST_INIT, STRING_LIST_INIT_DUP, SUBMODULE_UPDATE_STRATEGY_INIT}I think these struct fields need some comments. It's not clear what most of them represent.
[...]
> +static int update_clone_inspect_next_task(struct child_process *cp,
What is being inspected here? What does the return value represent?
Would a name like 'prepare_to_clone_next_submodule' make sense? A comment could say that 'ce' points to the candidate submodule to clone, that the return value represents whether we want to clone it, and that the first parameter is an output parameter representing a command to run to carry out the clone.
[...]
Show 7 quoted lines
> + if (ce_stage(ce)) {
> + if (pp->recursive_prefix)
> + strbuf_addf(err, "Skipping unmerged submodule %s/%s\n",
> + pp->recursive_prefix, ce->name);
> + else
> + strbuf_addf(err, "Skipping unmerged submodule %s\n",
> + ce->name);Nit: this would be easier to scan with braces.
[...]
> + sub = submodule_from_path(null_sha1, ce->name);
It's common to call submodule_from_path with null_sha1 as a parameter but I have trouble continuing to remember what that means. Maybe there should be a separate function that handles that? As a side-effect, the name and docstring of that function could explain what it means, which I still am not sure about. :)
> + if (pp->recursive_prefix)
> + displaypath = relative_path(pp->recursive_prefix,
> + ce->name, &displaypath_sb);
Show 6 quoted lines
> + else
> + displaypath = ce->name;
> +
> + if (pp->update.type == SM_UPDATE_NONE ||
> + (pp->update.type == SM_UPDATE_UNSPECIFIED &&
> + sub->update_strategy.type == SM_UPDATE_NONE)) {Nit: this might be more readable with the operators starting each
line:
if (pp->update.type == SM_UPDATE_NONE
|| (pp->update.type == SM_UPDATE_UNSPECIFIED
&& sub->update_strategy.type == SM_UPDATE_NONE)) {What does pp stand for?
Is the --update parameter ever set to 'none'? What does it mean when someone sets it to none?
> + strbuf_addf(err, "Skipping submodule '%s'\n",
> + displaypath);
Does the caller expect a newline at the end of err?
In the refs code that uses an err strbuf, the convention is to not end the message with a newline. That way, a function like die() can insert a newline and messages are guaranteed to be newline-terminated even if someone is sloppy and does the wrong thing when generating an error.
[...]
> + if (needs_cloning) {Could de-indent:
if (!needs_cloning)
goto cleanup;
Show 12 quoted lines
> + cp->git_cmd = 1;
> + cp->no_stdin = 1;
> + cp->stdout_to_stderr = 1;
> + cp->err = -1;
> + argv_array_push(&cp->args, "submodule--helper");
> + argv_array_push(&cp->args, "clone");
> + if (pp->quiet)
> + argv_array_push(&cp->args, "--quiet");
> +
> + if (pp->prefix)
> + argv_array_pushl(&cp->args, "--prefix", pp->prefix, NULL);
> +
Odd whitespace. I think it would be fine to remove the blank lines.
Show 7 quoted lines
> + argv_array_pushl(&cp->args, "--path", sub->path, NULL);
> + argv_array_pushl(&cp->args, "--name", sub->name, NULL);
> + argv_array_pushl(&cp->args, "--url", url, NULL);
> + if (pp->reference)
> + argv_array_push(&cp->args, pp->reference);
> + if (pp->depth)
> + argv_array_push(&cp->args, pp->depth);
What does 'cp' stand for mean? Would a name like 'child' work?
[...]
Show 17 quoted lines
> +static int update_clone_get_next_task(struct child_process *cp,
> + struct strbuf *err,
> + void *pp_cb,
> + void **pp_task_cb)
> +{
> + struct submodule_update_clone *pp = pp_cb;
> +
> + for (; pp->count < pp->list.nr; pp->count++) {
> + const struct cache_entry *ce = pp->list.entries[pp->count];
> + if (update_clone_inspect_next_task(cp, err, pp,
> + pp_task_cb, ce)) {
> + pp->count++;
> + return 1;
> + }
> + }
> + return 0;
> +}Ah, that clarifies things a bit.
The 'count' variable is more of a cursor than a count. Would a name + comment like
/* index into 'list' representing the next submodule to consider cloning */
int current;
work?
Show 10 quoted lines
> +
> +static int update_clone_start_failure(struct child_process *cp,
> + struct strbuf *err,
> + void *pp_cb,
> + void *pp_task_cb)
> +{
> + struct submodule_update_clone *pp = pp_cb;
> +
> + strbuf_addf(err, "error when starting a child process");
> + pp->print_unmatched = 1;What does print_unmatched mean?
[...]
Show 11 quoted lines
> +static int update_clone_task_finished(int result,
> + struct child_process *cp,
> + struct strbuf *err,
> + void *pp_cb,
> + void *pp_task_cb)
> +{
> + struct submodule_update_clone *pp = pp_cb;
> +
> + if (!result) {
> + return 0;
> + } else {No need for an 'else' here --- the 'if' already returned.
> + strbuf_addf(err, "error in one child process");
> + pp->print_unmatched = 1;
What does print_unmatched mean?
[...]
Show 7 quoted lines
> +static int update_clone(int argc, const char **argv, const char *prefix)
> +{
> + const char *update = NULL;
> + struct string_list_item *item;
> + struct submodule_update_clone pp = SUBMODULE_UPDATE_CLONE_INIT;
> +
> + struct option module_list_options[] = {Show 7 quoted lines
> + OPT_STRING(0, "prefix", &prefix,
> + N_("path"),
> + N_("path into the working tree")),
> + OPT_STRING(0, "recursive_prefix", &pp.recursive_prefix,
> + N_("path"),
> + N_("path into the working tree, across nested "
> + "submodule boundaries")),What do these options represent? I'm used to the 'prefix' parameter to a command coming from git machinery that remembers what the path to the original cwd was relative to the worktree or repository root. Here there's an option to set it --- is that intentional? Would setting the environment variable GIT_PREFIX (that git already knows how to respect) work in its place?
What is recursive_prefix relative to?
Nit: it would be more idiomatic to use a dash in place of an underscore
in the second one's name. But this is an internal interface so it
doesn't matter much.
> + OPT_STRING(0, "update", &update,
> + N_("string"),
> + N_("update command for submodules")),This one is confusing to me because while the script supports --rebase / --merge / --checkout this option seems to be more general.
If the help string said '(rebase, merge, or checkout)' then I wouldn't mind.
> + OPT_STRING(0, "reference", &pp.reference, "<repository>",
> + N_("Use the local reference repository "
> + "instead of a full clone")),Is this allowed to be relative? If so, what is it relative to?
[...]
> + OPT__QUIET(&pp.quiet, N_("do't print cloning progress")),> + const char *const git_submodule_helper_usage[] = {
> + N_("git submodule--helper list [--prefix=<path>] [<path>...]"),Is this the 'list' subcommand?
[...]
Show 7 quoted lines
> + gitmodules_config();
> + /* Overlay the parsed .gitmodules file with .git/config */
> + git_config(submodule_config, NULL);
> + run_processes_parallel(1, update_clone_get_next_task,
> + update_clone_start_failure,
> + update_clone_task_finished,
> + &pp);
> + if (pp.print_unmatched) {
> + printf("#unmatched\n");I'm still confused about this. I think a comment where 'print_unmatched' is declared would probably clear it up.
[...]
> + for_each_string_list_item(item, &pp.projectlines)
> + utf8_fprintf(stdout, "%s", item->string);
(just curious) why are these saved up and printed all at once instead of being printed as it goes?
[...]
> --- a/git-submodule.sh
> +++ b/git-submodule.sh
Very nice.
Thanks, Jonathan
Stefan Beller
