Because tabs have a variable width, the layout can diverge from what the author intended. Replace all tabs with spaces to the next column that is a multiple of 8.
This fixes several ascii art sketches and a code example where viewing it with a tab-width other than 8 lead to wrong indentation.
Signed-off-by: Dirk Wallenstein <halsmit@t-online.de>
---
.../howto/rebase-from-internal-branch.txt | 8 ++--
Documentation/howto/rebuild-from-update-hook.txt | 4 +-
.../howto/recover-corrupted-blob-object.txt | 50 +++++++++++-----------
Documentation/howto/revert-a-faulty-merge.txt | 16 +++----
Documentation/howto/revert-branch-rebase.txt | 2 +-
Documentation/howto/update-hook-example.txt | 8 ++--
Documentation/howto/use-git-daemon.txt | 10 ++---
7 files changed, 49 insertions(+), 49 deletions(-)
Show changes to 7 files +49 −49
Documentation/howto/rebase-from-internal-branch.txt, Documentation/howto/rebuild-from-update-hook.txt, Documentation/howto/recover-corrupted-blob-object.txt, Documentation/howto/revert-a-faulty-merge.txt, Documentation/howto/revert-branch-rebase.txt, Documentation/howto/update-hook-example.txt, Documentation/howto/use-git-daemon.txt
diff --git a/Documentation/howto/rebase-from-internal-branch.txt b/Documentation/howto/rebase-from-internal-branch.txt
index 19ab604..aefe5b1 100644
--- a/Documentation/howto/rebase-from-internal-branch.txt
+++ b/Documentation/howto/rebase-from-internal-branch.txt
@@ -1,8 +1,8 @@
-From: Junio C Hamano <gitster@pobox.com>
-To: git@vger.kernel.org
-Cc: Petr Baudis <pasky@suse.cz>, Linus Torvalds <torvalds@osdl.org>
+From:Junio C Hamano <gitster@pobox.com>
+To: git@vger.kernel.org
+Cc: Petr Baudis <pasky@suse.cz>, Linus Torvalds <torvalds@osdl.org>
Subject: Re: sending changesets from the middle of a git tree
-Date: Sun, 14 Aug 2005 18:37:39 -0700
+Date: Sun, 14 Aug 2005 18:37:39 -0700
Abstract: In this article, JC talks about how he rebases the
public "pu" branch using the core Git tools when he updates
the "master" branch, and how "rebase" works. Also discussed
diff --git a/Documentation/howto/rebuild-from-update-hook.txt b/Documentation/howto/rebuild-from-update-hook.txt
index 25378f6..97365ff 100644
--- a/Documentation/howto/rebuild-from-update-hook.txt
+++ b/Documentation/howto/rebuild-from-update-hook.txt
@@ -19,8 +19,8 @@ when I took over Git maintainership from Linus.
The directories relevant to this how-to are these two:
- /pub/scm/git/git.git/ The public Git repository.
- /pub/software/scm/git/docs/ The HTML documentation page.
+ /pub/scm/git/git.git/ The public Git repository.
+ /pub/software/scm/git/docs/ The HTML documentation page.
So I made a repository to generate the documentation under my
home directory over there.
diff --git a/Documentation/howto/recover-corrupted-blob-object.txt b/Documentation/howto/recover-corrupted-blob-object.txt
index 1b3b188..6a8cc49 100644
--- a/Documentation/howto/recover-corrupted-blob-object.txt
+++ b/Documentation/howto/recover-corrupted-blob-object.txt
@@ -62,22 +62,22 @@ we now know which tree points to it!
Now you can do
- git ls-tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8
+ git ls-tree 2d9263c6d23595e7cb2a21e5ebbb53655278dff8
which will show something like
- 100644 blob 8d14531846b95bfa3564b58ccfb7913a034323b8 .gitignore
- 100644 blob ebf9bf84da0aab5ed944264a5db2a65fe3a3e883 .mailmap
- 100644 blob ca442d313d86dc67e0a2e5d584b465bd382cbf5c COPYING
- 100644 blob ee909f2cc49e54f0799a4739d24c4cb9151ae453 CREDITS
- 040000 tree 0f5f709c17ad89e72bdbbef6ea221c69807009f6 Documentation
- 100644 blob 1570d248ad9237e4fa6e4d079336b9da62d9ba32 Kbuild
- 100644 blob 1c7c229a092665b11cd46a25dbd40feeb31661d9 MAINTAINERS
- ...
+ 100644 blob 8d14531846b95bfa3564b58ccfb7913a034323b8 .gitignore
+ 100644 blob ebf9bf84da0aab5ed944264a5db2a65fe3a3e883 .mailmap
+ 100644 blob ca442d313d86dc67e0a2e5d584b465bd382cbf5c COPYING
+ 100644 blob ee909f2cc49e54f0799a4739d24c4cb9151ae453 CREDITS
+ 040000 tree 0f5f709c17ad89e72bdbbef6ea221c69807009f6 Documentation
+ 100644 blob 1570d248ad9237e4fa6e4d079336b9da62d9ba32 Kbuild
+ 100644 blob 1c7c229a092665b11cd46a25dbd40feeb31661d9 MAINTAINERS
+ ...
and you should now have a line that looks like
- 10064 blob 4b9458b3786228369c63936db65827de3cc06200 my-magic-file
+ 10064 blob 4b9458b3786228369c63936db65827de3cc06200 my-magic-file
in the output. This already tells you a *lot* it tells you what file the
corrupt blob came from!
@@ -87,7 +87,7 @@ Now, it doesn't tell you quite enough, though: it doesn't tell what
lucky, and it may be the version that you already have checked out in your
working tree, in which case fixing this problem is really simple, just do
- git hash-object -w my-magic-file
+ git hash-object -w my-magic-file
again, and if it outputs the missing SHA-1 (4b945..) you're now all done!
@@ -96,26 +96,26 @@ version that was broken. How do you tell which version it was?
The easiest way to do it is to do
- git log --raw --all --full-history -- subdirectory/my-magic-file
+ git log --raw --all --full-history -- subdirectory/my-magic-file
and that will show you the whole log for that file (please realize that
the tree you had may not be the top-level tree, so you need to figure out
which subdirectory it was in on your own), and because you're asking for
raw output, you'll now get something like
- commit abc
- Author:
- Date:
- ..
- :100644 100644 4b9458b... newsha... M somedirectory/my-magic-file
+ commit abc
+ Author:
+ Date:
+ ..
+ :100644 100644 4b9458b... newsha... M somedirectory/my-magic-file
- commit xyz
- Author:
- Date:
+ commit xyz
+ Author:
+ Date:
- ..
- :100644 100644 oldsha... 4b9458b... M somedirectory/my-magic-file
+ ..
+ :100644 100644 oldsha... 4b9458b... M somedirectory/my-magic-file
and this actually tells you what the *previous* and *subsequent* versions
of that file were! So now you can look at those ("oldsha" and "newsha"
@@ -125,13 +125,13 @@ newer versions!
If you can do that, you can now recreate the missing object with
- git hash-object -w <recreated-file>
+ git hash-object -w <recreated-file>
and your repository is good again!
(Btw, you could have ignored the fsck, and started with doing a
- git log --raw --all
+ git log --raw --all
and just looked for the sha of the missing object (4b9458b..) in that
whole thing. It's up to you - Git does *have* a lot of information, it is
@@ -141,4 +141,4 @@ Trying to recreate trees and especially commits is *much* harder. So you
were lucky that it's a blob. It's quite possible that you can recreate the
thing.
- Linus
+ Linus
diff --git a/Documentation/howto/revert-a-faulty-merge.txt b/Documentation/howto/revert-a-faulty-merge.txt
index 075418e..4b75bfc 100644
--- a/Documentation/howto/revert-a-faulty-merge.txt
+++ b/Documentation/howto/revert-a-faulty-merge.txt
@@ -30,7 +30,7 @@ The history immediately after the "revert of the merge" would look like
this:
---o---o---o---M---x---x---W
- /
+ /
---A---B
where A and B are on the side development that was not so good, M is the
@@ -47,7 +47,7 @@ After the developers of the side branch fix their mistakes, the history
may look like this:
---o---o---o---M---x---x---W---x
- /
+ /
---A---B-------------------C---D
where C and D are to fix what was broken in A and B, and you may already
@@ -81,7 +81,7 @@ In such a situation, you would want to first revert the previous revert,
which would make the history look like this:
---o---o---o---M---x---x---W---x---Y
- /
+ /
---A---B-------------------C---D
where Y is the revert of W. Such a "revert of the revert" can be done
@@ -93,14 +93,14 @@ This history would (ignoring possible conflicts between what W and W..Y
changed) be equivalent to not having W nor Y at all in the history:
---o---o---o---M---x---x-------x----
- /
+ /
---A---B-------------------C---D
and merging the side branch again will not have conflict arising from an
earlier revert and revert of the revert.
---o---o---o---M---x---x-------x-------*
- / /
+ / /
---A---B-------------------C---D
Of course the changes made in C and D still can conflict with what was
@@ -111,13 +111,13 @@ faulty A and B, and redone the changes on top of the updated mainline
after the revert, the history would have looked like this:
---o---o---o---M---x---x---W---x---x
- / \
+ / \
---A---B A'--B'--C'
If you reverted the revert in such a case as in the previous example:
---o---o---o---M---x---x---W---x---x---Y---*
- / \ /
+ / \ /
---A---B A'--B'--C'
where Y is the revert of W, A' and B' are rerolled A and B, and there may
@@ -129,7 +129,7 @@ lot of overlapping changes that result in conflicts. So do not do "revert
of revert" blindly without thinking..
---o---o---o---M---x---x---W---x---x
- / \
+ / \
---A---B A'--B'--C'
In the history with rebased side branch, W (and M) are behind the merge
diff --git a/Documentation/howto/revert-branch-rebase.txt b/Documentation/howto/revert-branch-rebase.txt
index 0d5419e..bad54a1 100644
--- a/Documentation/howto/revert-branch-rebase.txt
+++ b/Documentation/howto/revert-branch-rebase.txt
@@ -154,7 +154,7 @@ $ git pull . master
Packing 0 objects
Unpacking 0 objects
-* committish: e3a693c... refs/heads/master from .
+* committish: e3a693c... refs/heads/master from .
Trying to merge e3a693c... into 8c1f5f0... using 10d781b...
Committed merge 7fb9b7262a1d1e0a47bbfdcbbcf50ce0635d3f8f
cache.h | 8 ++++----
diff --git a/Documentation/howto/update-hook-example.txt b/Documentation/howto/update-hook-example.txt
index a5193b1..40a35b1 100644
--- a/Documentation/howto/update-hook-example.txt
+++ b/Documentation/howto/update-hook-example.txt
@@ -51,19 +51,19 @@ verbose=false
GLOBIGNORE=*
function grant {
- $verbose && echo >&2 "-Grant- $1"
+ $verbose && echo >&2 "-Grant- $1"
echo grant
exit 0
}
function deny {
- $verbose && echo >&2 "-Deny- $1"
+ $verbose && echo >&2 "-Deny- $1"
echo deny
exit 1
}
function info {
- $verbose && echo >&2 "-Info- $1"
+ $verbose && echo >&2 "-Info- $1"
}
# Implement generic branch and tag policies.
@@ -83,7 +83,7 @@ case "$1" in
mb=$(git-merge-base "$2" "$3")
case "$mb,$2" in
"$2,$mb") info "Update is fast-forward" ;;
- *) noff=y; info "This is not a fast-forward update.";;
+ *) noff=y; info "This is not a fast-forward update.";;
esac
fi
;;
diff --git a/Documentation/howto/use-git-daemon.txt b/Documentation/howto/use-git-daemon.txt
index 7af2e52..6b33d85 100644
--- a/Documentation/howto/use-git-daemon.txt
+++ b/Documentation/howto/use-git-daemon.txt
@@ -12,11 +12,11 @@ things do not go according to plan (e.g. a socket could not be bound).
Another word of warning: if you run
- $ git ls-remote git://127.0.0.1/rule-the-world.git
+ $ git ls-remote git://127.0.0.1/rule-the-world.git
and you see a message like
- fatal: The remote end hung up unexpectedly
+ fatal: The remote end hung up unexpectedly
it only means that _something_ went wrong. To find out _what_ went wrong,
you have to ask the server. (Git refuses to be more precise for your
@@ -25,8 +25,8 @@ Sorry, not allowed -- who knows what you planned to do with them?)
With these two caveats, let's see an example:
- $ git daemon --reuseaddr --verbose --base-path=/home/gitte/git \
- --export-all -- /home/gitte/git/rule-the-world.git
+ $ git daemon --reuseaddr --verbose --base-path=/home/gitte/git \
+ --export-all -- /home/gitte/git/rule-the-world.git
(Of course, unless your user name is `gitte` _and_ your repository is in
~/rule-the-world.git, you have to adjust the paths. If your repository is
@@ -49,6 +49,6 @@ a good practice to put the paths after a "--" separator.
Now, test your daemon with
- $ git ls-remote git://127.0.0.1/rule-the-world.git
+ $ git ls-remote git://127.0.0.1/rule-the-world.git
If this does not work, find out why, and submit a patch to this document.
