[PATCH v2 2/2] attr: more matching optimizations from .gitignore
.gitattributes and .gitignore share the same pattern syntax but has separate matching implementation. Over the years, ignore's implementation accumulates more optimizations while attr's stays the same.
This patch adds those optimizations to attr. Basically it tries to avoid fnmatch as much as possible in favor of strncmp.
A few notes from this work is put in the documentation:
* "!pattern" syntax is not supported in .gitattributes as it's not
clear what it means (e.g. "!path attr" is about unsetting attr, or
undefining it..)
* patterns applying to directories
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
---
How about this? Diff from the previous version:
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index cc2ff1d..9a0ed19 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -23,7 +23,7 @@ Each line in `gitattributes` file is of form:
That is, a pattern followed by an attributes list,
separated by whitespaces. When the pattern matches the
path in question, the attributes listed on the line are given to
-the path. Only files can be attached attributes to.
+the path.
Each attribute can be in one of these states for a given path:
@@ -58,6 +58,13 @@ attribute. The rules how the pattern matches paths are the
same as in `.gitignore` files; see linkgit:gitignore[5].
Unlike `.gitignore`, negative patterns are not supported.
+Note that if a .gitignore rule matches a directory, the directory
+is ignored, which may be seen as assigning "ignore" attribute the
+directory and all files and directories inside. However, if a
+.gitattributes rule matches a directory, it manipulates
+attributes on that directory only, not files and directories
+inside.
+
When deciding what attributes are assigned to a path, git
consults `$GIT_DIR/info/attributes` file (which has the highest
precedence), `.gitattributes` file in the same directory as the
diff --git a/attr.c b/attr.c
index 7e85f82..4faf1ff 100644
--- a/attr.c
+++ b/attr.c
@@ -250,7 +250,6 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
else {
char *p = (char *)&(res->state[num_attr]);
memcpy(p, name, namelen);
- p[namelen] = 0;
res->u.pat.pattern = p;
parse_exclude_pattern(&res->u.pat.pattern,
&res->u.pat.patternlen,
@@ -690,16 +689,18 @@ static int path_matches(const char *pathname, int pathlen,
* contain the trailing slash
*/
- if (pathlen < baselen ||
+ if (pathlen < baselen + 1 ||
(baselen && pathname[baselen] != '/') ||
- strncmp(pathname, base, baselen))
+ strncmp_icase(pathname, base, baselen))
return 0;
namelen = baselen ? pathlen - baselen - 1 : pathlen;
name = pathname + pathlen - namelen;
- /* if the non-wildcard part is longer than the remaining
- pathname, surely it cannot match */
+ /*
+ * if the non-wildcard part is longer than the remaining
+ * pathname, surely it cannot match
+ */
if (!namelen || prefix > namelen)
return 0;
Documentation/gitattributes.txt | 8 +++++
attr.c | 72 +++++++++++++++++++++++++++++++++--------
dir.c | 8 ++---
dir.h | 1 +
t/t0003-attributes.sh | 14 ++++++++
5 files changed, 86 insertions(+), 17 deletions(-)
Show changes to 5 files +86 −17
Documentation/gitattributes.txt, attr.c, dir.c, dir.h, t/t0003-attributes.sh
diff --git a/Documentation/gitattributes.txt b/Documentation/gitattributes.txt
index 80120ea..9a0ed19 100644
--- a/Documentation/gitattributes.txt
+++ b/Documentation/gitattributes.txt
@@ -56,6 +56,14 @@ When more than one pattern matches the path, a later line
overrides an earlier line. This overriding is done per
attribute. The rules how the pattern matches paths are the
same as in `.gitignore` files; see linkgit:gitignore[5].
+Unlike `.gitignore`, negative patterns are not supported.
+
+Note that if a .gitignore rule matches a directory, the directory
+is ignored, which may be seen as assigning "ignore" attribute the
+directory and all files and directories inside. However, if a
+.gitattributes rule matches a directory, it manipulates
+attributes on that directory only, not files and directories
+inside.
When deciding what attributes are assigned to a path, git
consults `$GIT_DIR/info/attributes` file (which has the highest
diff --git a/attr.c b/attr.c
index e7caee4..4faf1ff 100644
--- a/attr.c
+++ b/attr.c
@@ -115,6 +115,13 @@ struct attr_state {
const char *setto;
};
+struct pattern {
+ const char *pattern;
+ int patternlen;
+ int nowildcardlen;
+ int flags; /* EXC_FLAG_* */
+};
+
/*
* One rule, as from a .gitattributes file.
*
@@ -131,7 +138,7 @@ struct attr_state {
*/
struct match_attr {
union {
- char *pattern;
+ struct pattern pat;
struct git_attr *attr;
} u;
char is_macro;
@@ -241,9 +248,16 @@ static struct match_attr *parse_attr_line(const char *line, const char *src,
if (is_macro)
res->u.attr = git_attr_internal(name, namelen);
else {
- res->u.pattern = (char *)&(res->state[num_attr]);
- memcpy(res->u.pattern, name, namelen);
- res->u.pattern[namelen] = 0;
+ char *p = (char *)&(res->state[num_attr]);
+ memcpy(p, name, namelen);
+ res->u.pat.pattern = p;
+ parse_exclude_pattern(&res->u.pat.pattern,
+ &res->u.pat.patternlen,
+ &res->u.pat.flags,
+ &res->u.pat.nowildcardlen);
+ if (res->u.pat.flags & EXC_FLAG_NEGATIVE)
+ die(_("Negative patterns are forbidden in git attributes\n"
+ "Use '\\!' for literal leading exclamation."));
}
res->is_macro = is_macro;
res->num_attr = num_attr;
@@ -640,25 +654,57 @@ static void prepare_attr_stack(const char *path)
static int path_matches(const char *pathname, int pathlen,
const char *basename,
- const char *pattern,
+ const struct pattern *pat,
const char *base, int baselen)
{
- if (!strchr(pattern, '/')) {
+ const char *pattern = pat->pattern;
+ int prefix = pat->nowildcardlen;
+ const char *name;
+ int namelen;
+
+ if (pat->flags & EXC_FLAG_NODIR) {
+ if (prefix == pat->patternlen &&
+ !strcmp_icase(pattern, basename))
+ return 1;
+
+ if (pat->flags & EXC_FLAG_ENDSWITH &&
+ pat->patternlen - 1 <= pathlen &&
+ !strcmp_icase(pattern + 1, pathname +
+ pathlen - pat->patternlen + 1))
+ return 1;
+
return (fnmatch_icase(pattern, basename, 0) == 0);
}
/*
* match with FNM_PATHNAME; the pattern has base implicitly
* in front of it.
*/
- if (*pattern == '/')
+ if (*pattern == '/') {
pattern++;
- if (pathlen < baselen ||
+ prefix--;
+ }
+
+ /*
+ * note: unlike excluded_from_list, baselen here does not
+ * contain the trailing slash
+ */
+
+ if (pathlen < baselen + 1 ||
(baselen && pathname[baselen] != '/') ||
- strncmp(pathname, base, baselen))
+ strncmp_icase(pathname, base, baselen))
+ return 0;
+
+ namelen = baselen ? pathlen - baselen - 1 : pathlen;
+ name = pathname + pathlen - namelen;
+
+ /*
+ * if the non-wildcard part is longer than the remaining
+ * pathname, surely it cannot match
+ */
+ if (!namelen || prefix > namelen)
return 0;
- if (baselen != 0)
- baselen++;
- return fnmatch_icase(pattern, pathname + baselen, FNM_PATHNAME) == 0;
+
+ return fnmatch_icase(pattern, name, FNM_PATHNAME) == 0;
}
static int macroexpand_one(int attr_nr, int rem);
@@ -696,7 +742,7 @@ static int fill(const char *path, int pathlen, const char *basename,
if (a->is_macro)
continue;
if (path_matches(path, pathlen, basename,
- a->u.pattern, base, stk->originlen))
+ &a->u.pat, base, stk->originlen))
rem = fill_one("fill", a, rem);
}
return rem;
diff --git a/dir.c b/dir.c
index 48aed85..cddf043 100644
--- a/dir.c
+++ b/dir.c
@@ -308,10 +308,10 @@ static int no_wildcard(const char *string)
return string[simple_length(string)] == '\0';
}
-static void parse_exclude_pattern(const char **pattern,
- int *patternlen,
- int *flags,
- int *nowildcardlen)
+void parse_exclude_pattern(const char **pattern,
+ int *patternlen,
+ int *flags,
+ int *nowildcardlen)
{
const char *p = *pattern;
size_t i, len;
diff --git a/dir.h b/dir.h
index 41ea32d..fd5c2aa 100644
--- a/dir.h
+++ b/dir.h
@@ -97,6 +97,7 @@ extern int path_excluded(struct path_exclude_check *, const char *, int namelen,
extern int add_excludes_from_file_to_list(const char *fname, const char *base, int baselen,
char **buf_p, struct exclude_list *which, int check_index);
extern void add_excludes_from_file(struct dir_struct *, const char *fname);
+extern void parse_exclude_pattern(const char **string, int *patternlen, int *flags, int *nowildcardlen);
extern void add_exclude(const char *string, const char *base,
int baselen, struct exclude_list *which);
extern void free_excludes(struct exclude_list *el);
diff --git a/t/t0003-attributes.sh b/t/t0003-attributes.sh
index 51f3045..4a1402f 100755
--- a/t/t0003-attributes.sh
+++ b/t/t0003-attributes.sh
@@ -242,4 +242,18 @@ test_expect_success 'bare repository: test info/attributes' '
attr_check subdir/a/i unspecified
'
+test_expect_success 'leave bare' '
+ cd ..
+'
+
+test_expect_success 'negative patterns' '
+ echo "!f test=bar" >.gitattributes &&
+ test_must_fail git check-attr test -- f
+'
+
+test_expect_success 'patterns starting with exclamation' '
+ echo "\!f test=foo" >.gitattributes &&
+ attr_check "!f" foo
+'
+
test_done
--
1.7.12.1.406.g6ab07c4
Nguyễn Thái Ngọc Duy
