threads / patch / 22834

patch, 4 partsgit-push: squelch advice message if in --porcelain mode

Subject: [PATCH 2/4] git-push: squelch advice message if in --porcelain mode

## tl;dr

6 messages between Feb 26, 2010 and Feb 26, 2010. Diffs are folded; open one to read it.

replies: 5people: 2as markdown or json

Larry D'Anna· Feb 26, 2010, 19:50 UTC · lore

[PATCH 0/4] ld/push-porcelain

I'm reposing this series to restart discussion on it. It's currently listed as stalled. The only change versus what's in pu is that this one doesn't mess with the semantics of --quiet.

So, what does it need?

Larry D'Anna (4):
  git-push: fix an error message so it goes to stderr
  git-push: squelch advice message if in --porcelain mode
  git-push: send "To <remoteurl>" messages to the standard output in
    --porcelain mode
  git-push: make git push --dry-run --porcelain exit with status 0 even
    if updates will be rejected

 builtin-push.c      |   11 ++++++++---
 builtin-send-pack.c |    4 ++++
 send-pack.h         |    1 +
 transport.c         |    6 ++++--
 4 files changed, 17 insertions(+), 5 deletions(-)

Larry D'Anna· Feb 26, 2010, 19:50 UTC · re: Larry D'Anna · lore

[PATCH 1/4] git-push: fix an error message so it goes to stderr

These sort of messages typically go to the standard error.

Signed-off-by: Larry D'Anna <larry@elder-gods.org>
---
 builtin-push.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

Show changes to builtin-push.c +3 −3

diff --git a/builtin-push.c b/builtin-push.c
index 5633f0a..0a27072 100644
--- a/builtin-push.c
+++ b/builtin-push.c
@@ -124,9 +124,9 @@ static int push_with_options(struct transport *transport, int flags)
 		return 0;
 
 	if (nonfastforward && advice_push_nonfastforward) {
-		printf("To prevent you from losing history, non-fast-forward updates were rejected\n"
-		       "Merge the remote changes before pushing again.  See the 'Note about\n"
-		       "fast-forwards' section of 'git push --help' for details.\n");
+		fprintf(stderr, "To prevent you from losing history, non-fast-forward updates were rejected\n"
+				"Merge the remote changes before pushing again.  See the 'Note about\n"
+				"fast-forwards' section of 'git push --help' for details.\n");
 	}
 
 	return 1;

-- 
1.7.0.rc2.40.g7d8aa

Larry D'Anna· Feb 26, 2010, 19:50 UTC · re: Larry D'Anna · lore

By default, git-push may give the user a verbose advice message if a ref is rejected for not being a fast-forward. This patch squelches that message for --porcelain mode.

Signed-off-by: Larry D'Anna <larry@elder-gods.org>
---
 builtin-push.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

Show changes to builtin-push.c +5 −0

diff --git a/builtin-push.c b/builtin-push.c
index 0a27072..aacba45 100644
--- a/builtin-push.c
+++ b/builtin-push.c
@@ -226,6 +226,11 @@ int cmd_push(int argc, const char **argv, const char *prefix)
 	git_config(git_default_config, NULL);
 	argc = parse_options(argc, argv, prefix, options, push_usage, 0);
 
+	if (flags & TRANSPORT_PUSH_PORCELAIN) {
+		/* Do not give advice messages to Porcelain scripts */
+		advice_push_nonfastforward = 0;
+	}
+
 	if (deleterefs && (tags || (flags & (TRANSPORT_PUSH_ALL | TRANSPORT_PUSH_MIRROR))))
 		die("--delete is incompatible with --all, --mirror and --tags");
 	if (deleterefs && argc < 2)

-- 
1.7.0.rc2.40.g7d8aa

Junio C Hamano· Feb 26, 2010, 20:04 UTC · re: Larry D'Anna · lore

Re: [PATCH 2/4] git-push: squelch advice message if in --porcelain mode

I thought that the previous discussion thread establish that [PATCH 2/4] is no longer wanted, as long as we send the advice message to the standard error output (which is done by [PATCH 1/4]---by the way, do not call that "an error message").

Larry D'Anna· Feb 26, 2010, 19:50 UTC · re: Larry D'Anna · lore

[PATCH 3/4] git-push: send "To <remoteurl>" messages to the standard output in --porcelain mode

git-push prints the line "To <remoteurl>" before above each of the ref status lines. In --porcelain mode, these "To <remoteurl>" lines go to the standard error, but the ref status lines go to the standard output. This makes it difficult for the process reading standard output to know which ref status lines correspond to which remote. This patch sends the "To <remoteurl>" lines to the the standard output instead.

Signed-off-by: Larry D'Anna <larry@elder-gods.org>
---
 transport.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Show changes to transport.c +1 −1

diff --git a/transport.c b/transport.c
index 08e4fa0..32885f7 100644
--- a/transport.c
+++ b/transport.c
@@ -675,7 +675,7 @@ static void print_ok_ref_status(struct ref *ref, int porcelain)
 static int print_one_push_status(struct ref *ref, const char *dest, int count, int porcelain)
 {
 	if (!count)
-		fprintf(stderr, "To %s\n", dest);
+		fprintf(porcelain ? stdout : stderr, "To %s\n", dest);
 
 	switch(ref->status) {
 	case REF_STATUS_NONE:

-- 
1.7.0.rc2.40.g7d8aa

Larry D'Anna· Feb 26, 2010, 19:50 UTC · re: Larry D'Anna · lore

[PATCH 4/4] git-push: make git push --dry-run --porcelain exit with status 0 even if updates will be rejected

The script calling git push --dry-run --porcelain can see clearly from the output that the updates will be rejected. However, it will probably need to distinguish this condition from the push failing for other reasons, such as the remote not being reachable.

Signed-off-by: Larry D'Anna <larry@elder-gods.org>
---
 builtin-send-pack.c |    4 ++++
 send-pack.h         |    1 +
 transport.c         |    4 +++-
 3 files changed, 8 insertions(+), 1 deletions(-)

Show changes to 3 files +8 −1

builtin-send-pack.c, send-pack.h, transport.c

diff --git a/builtin-send-pack.c b/builtin-send-pack.c
index 2183a47..2bf3d43 100644
--- a/builtin-send-pack.c
+++ b/builtin-send-pack.c
@@ -510,6 +510,10 @@ int send_pack(struct send_pack_args *args,
 
 	if (ret < 0)
 		return ret;
+
+	if (args->porcelain && args->dry_run)
+		return 0;
+
 	for (ref = remote_refs; ref; ref = ref->next) {
 		switch (ref->status) {
 		case REF_STATUS_NONE:
diff --git a/send-pack.h b/send-pack.h
index 28141ac..60b4ba6 100644
--- a/send-pack.h
+++ b/send-pack.h
@@ -4,6 +4,7 @@
 struct send_pack_args {
 	unsigned verbose:1,
 		quiet:1,
+		porcelain:1,
 		send_mirror:1,
 		force_update:1,
 		use_thin_pack:1,
diff --git a/transport.c b/transport.c
index 32885f7..8291621 100644
--- a/transport.c
+++ b/transport.c
@@ -791,6 +791,7 @@ static int git_transport_push(struct transport *transport, struct ref *remote_re
 	args.verbose = !!(flags & TRANSPORT_PUSH_VERBOSE);
 	args.quiet = !!(flags & TRANSPORT_PUSH_QUIET);
 	args.dry_run = !!(flags & TRANSPORT_PUSH_DRY_RUN);
+	args.porcelain = !!(flags & TRANSPORT_PUSH_PORCELAIN);
 
 	ret = send_pack(&args, data->fd, data->conn, remote_refs,
 			&data->extra_have);
@@ -1055,7 +1056,8 @@ int transport_push(struct transport *transport,
 		ret = transport->push_refs(transport, remote_refs, flags);
 		err = push_had_errors(remote_refs);
 
-		ret |= err;
+		if ( !(pretend && porcelain) )
+			ret |= err;
 
 		if (!quiet || err)
 			print_push_status(transport->url, remote_refs,

-- 
1.7.0.rc2.40.g7d8aa