[PATCH] Drop deprecated commands from git(7) and update deprecation notices
Also remove manpages of commands that no longer exist.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
---
Documentation/cmd-list.perl | 5 ---
Documentation/git-local-fetch.txt | 66 -------------------------------------
Documentation/git-ssh-fetch.txt | 52 -----------------------------
Documentation/git-ssh-upload.txt | 48 ---------------------------
Documentation/git-tar-tree.txt | 2 +-
Documentation/git-var.txt | 5 ++-
6 files changed, 4 insertions(+), 174 deletions(-)
delete mode 100644 Documentation/git-local-fetch.txt
delete mode 100644 Documentation/git-ssh-fetch.txt
delete mode 100644 Documentation/git-ssh-upload.txt
Andreas Ericsson <ae@op5.se> wrote Thu, Nov 08, 2007:
> Jonas Fonseca wrote:
> >... and remove manpages of commands that no longer exists.
> >
> >diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt
> >index 8139423..73c37b0 100644
> >--- a/Documentation/git-var.txt
> >+++ b/Documentation/git-var.txt
> >@@ -20,7 +20,8 @@ OPTIONS
> > Cause the logical variables to be listed. In addition, all the
> > variables of the git configuration file .git/config are listed
> > as well. (However, the configuration variables listing functionality
> >- is deprecated in favor of `git-config -l`.)
> >+ is deprecated. Use gitlink:git-config[1] with the option '-l'
> >+ instead.)
> >
>
> Skip the parentheses. It reads better without it.
Yes, you are right. Also updated the commit message to be less
misleading (git-var is not removed but the deprecation notice is
updated).
Show changes to 6 files +4 −151
Documentation/cmd-list.perl, Documentation/git-local-fetch.txt, Documentation/git-ssh-fetch.txt, Documentation/git-ssh-upload.txt, Documentation/git-tar-tree.txt, Documentation/git-var.txt
diff --git a/Documentation/cmd-list.perl b/Documentation/cmd-list.perl
index 8d21d42..7f1f5d2 100755
--- a/Documentation/cmd-list.perl
+++ b/Documentation/cmd-list.perl
@@ -124,9 +124,7 @@ git-index-pack plumbingmanipulators
git-init mainporcelain
git-instaweb ancillaryinterrogators
gitk mainporcelain
-git-local-fetch synchingrepositories
git-log mainporcelain
-git-lost-found ancillarymanipulators
git-ls-files plumbinginterrogators
git-ls-remote plumbinginterrogators
git-ls-tree plumbinginterrogators
@@ -178,8 +176,6 @@ git-show-branch ancillaryinterrogators
git-show-index plumbinginterrogators
git-show-ref plumbinginterrogators
git-sh-setup purehelpers
-git-ssh-fetch synchingrepositories
-git-ssh-upload synchingrepositories
git-stash mainporcelain
git-status mainporcelain
git-stripspace purehelpers
@@ -187,7 +183,6 @@ git-submodule mainporcelain
git-svn foreignscminterface
git-symbolic-ref plumbingmanipulators
git-tag mainporcelain
-git-tar-tree plumbinginterrogators
git-unpack-file plumbinginterrogators
git-unpack-objects plumbingmanipulators
git-update-index plumbingmanipulators
diff --git a/Documentation/git-local-fetch.txt b/Documentation/git-local-fetch.txt
deleted file mode 100644
index e830dee..0000000
--- a/Documentation/git-local-fetch.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-git-local-fetch(1)
-==================
-
-NAME
-----
-git-local-fetch - Duplicate another git repository on a local system
-
-
-SYNOPSIS
---------
-[verse]
-'git-local-fetch' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] [-l] [-s] [-n]
- commit-id path
-
-DESCRIPTION
------------
-THIS COMMAND IS DEPRECATED.
-
-Duplicates another git repository on a local system.
-
-OPTIONS
--------
--c::
- Get the commit objects.
--t::
- Get trees associated with the commit objects.
--a::
- Get all the objects.
--v::
- Report what is downloaded.
--s::
- Instead of regular file-to-file copying use symbolic links to the objects
- in the remote repository.
--l::
- Before attempting symlinks (if -s is specified) or file-to-file copying the
- remote objects, try to hardlink the remote objects into the local
- repository.
--n::
- Never attempt to file-to-file copy remote objects. Only useful with
- -s or -l command-line options.
-
--w <filename>::
- Writes the commit-id into the filename under $GIT_DIR/refs/<filename> on
- the local end after the transfer is complete.
-
---stdin::
- Instead of a commit id on the command line (which is not expected in this
- case), 'git-local-fetch' expects lines on stdin in the format
-
- <commit-id>['\t'<filename-as-in--w>]
-
---recover::
- Verify that everything reachable from target is fetched. Used after
- an earlier fetch is interrupted.
-
-Author
-------
-Written by Junio C Hamano <junkio@cox.net>
-
-Documentation
---------------
-Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
-
-GIT
----
-Part of the gitlink:git[7] suite
diff --git a/Documentation/git-ssh-fetch.txt b/Documentation/git-ssh-fetch.txt
deleted file mode 100644
index 8d3e2ff..0000000
--- a/Documentation/git-ssh-fetch.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-git-ssh-fetch(1)
-================
-
-NAME
-----
-git-ssh-fetch - Fetch from a remote repository over ssh connection
-
-
-
-SYNOPSIS
---------
-'git-ssh-fetch' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] commit-id url
-
-DESCRIPTION
------------
-THIS COMMAND IS DEPRECATED.
-
-Pulls from a remote repository over ssh connection, invoking
-git-ssh-upload on the other end. It functions identically to
-git-ssh-upload, aside from which end you run it on.
-
-
-OPTIONS
--------
-commit-id::
- Either the hash or the filename under [URL]/refs/ to
- pull.
-
--c::
- Get the commit objects.
--t::
- Get trees associated with the commit objects.
--a::
- Get all the objects.
--v::
- Report what is downloaded.
--w::
- Writes the commit-id into the filename under $GIT_DIR/refs/ on
- the local end after the transfer is complete.
-
-
-Author
-------
-Written by Daniel Barkalow <barkalow@iabervon.org>
-
-Documentation
---------------
-Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
-
-GIT
----
-Part of the gitlink:git[7] suite
diff --git a/Documentation/git-ssh-upload.txt b/Documentation/git-ssh-upload.txt
deleted file mode 100644
index 5e2ca8d..0000000
--- a/Documentation/git-ssh-upload.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-git-ssh-upload(1)
-=================
-
-NAME
-----
-git-ssh-upload - Push to a remote repository over ssh connection
-
-
-SYNOPSIS
---------
-'git-ssh-upload' [-c] [-t] [-a] [-d] [-v] [-w filename] [--recover] commit-id url
-
-DESCRIPTION
------------
-THIS COMMAND IS DEPRECATED.
-
-Pushes from a remote repository over ssh connection, invoking
-git-ssh-fetch on the other end. It functions identically to
-git-ssh-fetch, aside from which end you run it on.
-
-OPTIONS
--------
-commit-id::
- Id of commit to push.
-
--c::
- Get the commit objects.
--t::
- Get tree associated with the requested commit object.
--a::
- Get all the objects.
--v::
- Report what is uploaded.
--w::
- Writes the commit-id into the filename under [URL]/refs/ on
- the remote end after the transfer is complete.
-
-Author
-------
-Written by Daniel Barkalow <barkalow@iabervon.org>
-
-Documentation
---------------
-Documentation by Daniel Barkalow
-
-GIT
----
-Part of the gitlink:git[7] suite
diff --git a/Documentation/git-tar-tree.txt b/Documentation/git-tar-tree.txt
index 434607b..4aaf813 100644
--- a/Documentation/git-tar-tree.txt
+++ b/Documentation/git-tar-tree.txt
@@ -12,7 +12,7 @@ SYNOPSIS
DESCRIPTION
-----------
-THIS COMMAND IS DEPRECATED. Use `git-archive` with `--format=tar`
+THIS COMMAND IS DEPRECATED. Use gitlink:git-archive[1] with `--format=tar`
option instead (and move the <base> argument to `--prefix=base/`).
Creates a tar archive containing the tree structure for the named tree.
diff --git a/Documentation/git-var.txt b/Documentation/git-var.txt
index 8139423..7e90a95 100644
--- a/Documentation/git-var.txt
+++ b/Documentation/git-var.txt
@@ -19,8 +19,9 @@ OPTIONS
-l::
Cause the logical variables to be listed. In addition, all the
variables of the git configuration file .git/config are listed
- as well. (However, the configuration variables listing functionality
- is deprecated in favor of `git-config -l`.)
+ as well. However, the configuration variables listing functionality
+ is deprecated. Use gitlink:git-config[1] with the option '-l'
+ instead.
EXAMPLE
--------
--
1.5.3.5.1622.g41d10
--
Jonas Fonseca
Johannes Schindelin
