From: John Cai <johncai86@gmail.com>
Date: Sat, 01 Jan 2022 02:06:58 GMT
Subject: Re: [PATCH 1/2] builtin/reflog.c: use parse-options for expire subcommand
Message-ID: <6C9B7D67-D21C-44EA-B3FB-9605968AD0FF@gmail.com>
In-Reply-To: <9bd3c6672c4232e0a5c0905b834146ca02af8a4b.1640932151.git.gitgitgadget@gmail.com>



> On Dec 30, 2021, at 10:29 PM, John Cai via GitGitGadget <gitgitgadget@gmail.com> wrote:
> 
> From: John Cai <johncai86@gmail.com>
> 
> Switch out manual argv parsing for the reflog expire subcommand to use
> the parse-options API.
> 
> Signed-off-by: "John Cai" <johncai86@gmail.com>
> ---
> builtin/reflog.c | 72 ++++++++++++++++++++++++------------------------
> 1 file changed, 36 insertions(+), 36 deletions(-)
> 
> diff --git a/builtin/reflog.c b/builtin/reflog.c
> index 175c83e7cc2..afaf5ba67e2 100644
> --- a/builtin/reflog.c
> +++ b/builtin/reflog.c
> @@ -11,13 +11,8 @@
> #include "revision.h"
> #include "reachable.h"
> #include "worktree.h"
> +#include "parse-options.h"
> 
> -/* NEEDSWORK: switch to using parse_options */
> -static const char reflog_expire_usage[] =
> -N_("git reflog expire [--expire=<time>] "
> -   "[--expire-unreachable=<time>] "
> -   "[--rewrite] [--updateref] [--stale-fix] [--dry-run | -n] "
> -   "[--verbose] [--all] <refs>...");
> static const char reflog_delete_usage[] =
> N_("git reflog delete [--rewrite] [--updateref] "
>    "[--dry-run | -n] [--verbose] <refs>...");
> @@ -539,6 +534,14 @@ static void set_reflog_expiry_param(struct cmd_reflog_expire_cb *cb, int slot, c
> 		cb->expire_unreachable = default_reflog_expire_unreachable;
> }
> 
> +static const char * reflog_expire_usage[] = {
> +	N_("git reflog expire [--expire=<time>] "
> +   "[--expire-unreachable=<time>] "
> +   "[--rewrite] [--updateref] [--stale-fix] [--dry-run | -n] "
> +   "[--verbose] [--all] <refs>..."),
> +	NULL
> +};
> +
> static int cmd_reflog_expire(int argc, const char **argv, const char *prefix)
> {
> 	struct expire_reflog_policy_cb cb;
> @@ -547,6 +550,29 @@ static int cmd_reflog_expire(int argc, const char **argv, const char *prefix)
> 	int explicit_expiry = 0;
> 	unsigned int flags = 0;
> 
> +	const struct option options[] = {
> +		OPT_BIT(0, "dry-run", &flags, N_("do not actually prune any entries"),
> +				EXPIRE_REFLOGS_DRY_RUN),
> +		OPT_BIT(0, "rewrite", &flags,
> +				N_("rewrite the old SHA1 with the new SHA1 of the entry that now precedes it"),
> +				EXPIRE_REFLOGS_REWRITE),
> +		OPT_BIT(0, "updateref", &flags,
> +				N_("update the reference to the value of the top reflog entry"),
> +				EXPIRE_REFLOGS_UPDATE_REF),
> +		OPT_BIT(0, "verbose", &flags, N_("print extra information on screen."),
> +				EXPIRE_REFLOGS_VERBOSE),
> +		OPT_EXPIRY_DATE(0, "expire", &cb.cmd.expire_total,
> +				N_("prune entries older than the specified time")),
> +		OPT_EXPIRY_DATE(0, "expire-unreachable", &cb.cmd.expire_unreachable,
> +			N_("prune entries older than <time> that are not reachable from the current tip of the branch")),
> +		OPT_BOOL(0, "stale-fix", &cb.cmd.stalefix,
> +				N_("prune any reflog entries that point to broken commits")),
> +		OPT_BOOL(0, "all", &do_all, N_("process the reflogs of all references")),
> +		OPT_BOOL(1, "single-worktree", &all_worktrees,
> +				N_("limits processing to reflogs from the current worktree only.")),
> +		OPT_END()
> +	};
> +
> 	default_reflog_expire_unreachable = now - 30 * 24 * 3600;
> 	default_reflog_expire = now - 90 * 24 * 3600;
> 	git_config(reflog_expire_config, NULL);
> @@ -560,41 +586,15 @@ static int cmd_reflog_expire(int argc, const char **argv, const char *prefix)
> 
> 	for (i = 1; i < argc; i++) {

I was hoping we could get rid of this for loop altogether, but I couldn’t figure out a clean way since --expire and expire-unreachable
take a value __and__ set a flag bit. So I kept this for loop for the sole purpose of setting the explicit_expiry bit flag. Any suggestions?

> 		const char *arg = argv[i];
> -
> -		if (!strcmp(arg, "--dry-run") || !strcmp(arg, "-n"))
> -			flags |= EXPIRE_REFLOGS_DRY_RUN;
> -		else if (skip_prefix(arg, "--expire=", &arg)) {
> -			if (parse_expiry_date(arg, &cb.cmd.expire_total))
> -				die(_("'%s' is not a valid timestamp"), arg);
> +		if (starts_with(arg, "--expire=")) {
> 			explicit_expiry |= EXPIRE_TOTAL;
> -		}
> -		else if (skip_prefix(arg, "--expire-unreachable=", &arg)) {
> -			if (parse_expiry_date(arg, &cb.cmd.expire_unreachable))
> -				die(_("'%s' is not a valid timestamp"), arg);
> +		} else if (starts_with(arg, "--expire-unreachable=")) {
> 			explicit_expiry |= EXPIRE_UNREACH;
> 		}
> -		else if (!strcmp(arg, "--stale-fix"))
> -			cb.cmd.stalefix = 1;
> -		else if (!strcmp(arg, "--rewrite"))
> -			flags |= EXPIRE_REFLOGS_REWRITE;
> -		else if (!strcmp(arg, "--updateref"))
> -			flags |= EXPIRE_REFLOGS_UPDATE_REF;
> -		else if (!strcmp(arg, "--all"))
> -			do_all = 1;
> -		else if (!strcmp(arg, "--single-worktree"))
> -			all_worktrees = 0;
> -		else if (!strcmp(arg, "--verbose"))
> -			flags |= EXPIRE_REFLOGS_VERBOSE;
> -		else if (!strcmp(arg, "--")) {
> -			i++;
> -			break;
> -		}
> -		else if (arg[0] == '-')
> -			usage(_(reflog_expire_usage));
> -		else
> -			break;
> 	}
> 
> +	argc = parse_options(argc, argv, prefix, options, reflog_expire_usage, 0);
> +
> 	/*
> 	 * We can trust the commits and objects reachable from refs
> 	 * even in older repository.  We cannot trust what's reachable
> -- 
> gitgitgadget
>