From: Dragan Simic <dsimic@manjaro.org>
Date: Tue, 20 Feb 2024 19:49:33 GMT
Subject: Re: [PATCH] branch: rework the descriptions of rename and copy operations
Message-ID: <59ff7c3caec40bf96795ab140d57afbd@manjaro.org>
In-Reply-To: <16c1f883-881f-4f8c-95b2-22fb4825b733@gmail.com>

On 2024-02-20 20:12, Rubén Justo wrote:
> On 20-feb-2024 10:24:25, Junio C Hamano wrote:
> 
>> I have slight aversion to non-words like "oldbranch" (not
>> "old-branch"), but not that much.
> 
> I also have problems with <old...>.  What's the reference in "old"?
> 
> Prior to the restructuring of the whole file, we should probably do:

FWIW, I'm perfectly fine with having your patch, available below,
applied right now.  To me, it would provide a true improvement.

> ---- >8 --------- >8 --------- >8 --------- >8 ------
> Subject: [PATCH] branch: adjust documentation
> 
> Adjust the terms we use in Documentation/git-branch.txt to what
> we say in CodingGuideLines:
> 
> 	If a placeholder has multiple words, they are separated by dashes:
> 	  <new-branch-name>
> 	  --template=<template-directory>
> 
> Best viewed with --word-diff.
> 
> Signed-off-by: Rubén Justo <rjusto@gmail.com>
> ---
>  Documentation/git-branch.txt | 57 +++++++++++++++++-------------------
>  1 file changed, 27 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/git-branch.txt 
> b/Documentation/git-branch.txt
> index 0b08442932..d834d89a7f 100644
> --- a/Documentation/git-branch.txt
> +++ b/Documentation/git-branch.txt
> @@ -17,13 +17,13 @@ SYNOPSIS
>  	[(-r | --remotes) | (-a | --all)]
>  	[--list] [<pattern>...]
>  'git branch' [--track[=(direct|inherit)] | --no-track] [-f]
> -	[--recurse-submodules] <branchname> [<start-point>]
> -'git branch' (--set-upstream-to=<upstream> | -u <upstream>) 
> [<branchname>]
> -'git branch' --unset-upstream [<branchname>]
> -'git branch' (-m | -M) [<oldbranch>] <newbranch>
> -'git branch' (-c | -C) [<oldbranch>] <newbranch>
> -'git branch' (-d | -D) [-r] <branchname>...
> -'git branch' --edit-description [<branchname>]
> +	[--recurse-submodules] <new-branch> [<start-point>]
> +'git branch' (--set-upstream-to=<upstream> | -u <upstream>) [<branch>]
> +'git branch' --unset-upstream [<branch>]
> +'git branch' (-m | -M) [<branch>] <new-branch>
> +'git branch' (-c | -C) [<branch>] <new-branch>
> +'git branch' (-d | -D) [-r] <branch>...
> +'git branch' --edit-description [<branch>]
> 
>  DESCRIPTION
>  -----------
> @@ -53,7 +53,7 @@ branches not merged into the named commit will be
> listed.  If the <commit>
>  argument is missing it defaults to `HEAD` (i.e. the tip of the current
>  branch).
> 
> -The command's second form creates a new branch head named <branchname>
> +The command's second form creates a new branch head named <branch>
>  which points to the current `HEAD`, or <start-point> if given. As a
>  special case, for <start-point>, you may use `"A...B"` as a shortcut 
> for
>  the merge base of `A` and `B` if there is exactly one merge base. You
> @@ -61,7 +61,7 @@ can leave out at most one of `A` and `B`, in which
> case it defaults to
>  `HEAD`.
> 
>  Note that this will create the new branch, but it will not switch the
> -working tree to it; use "git switch <newbranch>" to switch to the
> +working tree to it; use "git switch" to switch to the
>  new branch.
> 
>  When a local branch is started off a remote-tracking branch, Git sets 
> up the
> @@ -72,17 +72,17 @@ the remote-tracking branch. This behavior may be
> changed via the global
>  overridden by using the `--track` and `--no-track` options, and
>  changed later using `git branch --set-upstream-to`.
> 
> -With a `-m` or `-M` option, <oldbranch> will be renamed to 
> <newbranch>.
> -If <oldbranch> had a corresponding reflog, it is renamed to match
> -<newbranch>, and a reflog entry is created to remember the branch
> -renaming. If <newbranch> exists, -M must be used to force the rename
> +With a `-m` or `-M` option, <branch> will be renamed to <new-branch>.
> +If <branch> had a corresponding reflog, it is renamed to match
> +<new-branch>, and a reflog entry is created to remember the branch
> +renaming. If <new-branch> exists, -M must be used to force the rename
>  to happen.
> 
>  The `-c` and `-C` options have the exact same semantics as `-m` and
>  `-M`, except instead of the branch being renamed, it will be copied to 
> a
>  new name, along with its config and reflog.
> 
> -With a `-d` or `-D` option, `<branchname>` will be deleted.  You may
> +With a `-d` or `-D` option, `<branch>` will be deleted.  You may
>  specify more than one branch for deletion.  If the branch currently
>  has a reflog then the reflog will also be deleted.
> 
> @@ -107,7 +107,7 @@ OPTIONS
>  --create-reflog::
>  	Create the branch's reflog.  This activates recording of
>  	all changes made to the branch ref, enabling use of date
> -	based sha1 expressions such as "<branchname>@\{yesterday}".
> +	based sha1 expressions such as "<branch>@\{yesterday}".
>  	Note that in non-bare repositories, reflogs are usually
>  	enabled by default by the `core.logAllRefUpdates` config option.
>  	The negated form `--no-create-reflog` only overrides an earlier
> @@ -116,7 +116,7 @@ OPTIONS
> 
>  -f::
>  --force::
> -	Reset <branchname> to <start-point>, even if <branchname> exists
> +	Reset <branch> to <start-point>, even if <branch> exists
>  	already. Without `-f`, 'git branch' refuses to change an existing 
> branch.
>  	In combination with `-d` (or `--delete`), allow deleting the
>  	branch irrespective of its merged status, or whether it even
> @@ -124,8 +124,8 @@ OPTIONS
>  	`-m` (or `--move`), allow renaming the branch even if the new
>  	branch name already exists, the same applies for `-c` (or `--copy`).
>  +
> -Note that 'git branch -f <branchname> [<start-point>]', even with 
> '-f',
> -refuses to change an existing branch `<branchname>` that is checked 
> out
> +Note that 'git branch -f <branch> [<start-point>]', even with '-f',
> +refuses to change an existing branch `<branch>` that is checked out
>  in another worktree linked to the same repository.
> 
>  -m::
> @@ -255,7 +255,7 @@ how the `branch.<name>.remote` and
> `branch.<name>.merge` options are used.
>  	linkgit:git-config[1]. Currently, only branch creation is
>  	supported.
>  +
> -When used in branch creation, a new branch <branchname> will be 
> created
> +When used in branch creation, a new branch <branch> will be created
>  in the superproject and all of the submodules in the superproject's
>  <start-point>. In submodules, the branch will point to the submodule
>  commit in the superproject's <start-point> but the branch's tracking
> @@ -270,12 +270,12 @@ superproject's "origin/main", but tracks the
> submodule's "origin/main".
> 
>  -u <upstream>::
>  --set-upstream-to=<upstream>::
> -	Set up <branchname>'s tracking information so <upstream> is
> -	considered <branchname>'s upstream branch. If no <branchname>
> +	Set up <branch>'s tracking information so <upstream> is
> +	considered <branch>'s upstream branch. If no <branch>
>  	is specified, then it defaults to the current branch.
> 
>  --unset-upstream::
> -	Remove the upstream information for <branchname>. If no branch
> +	Remove the upstream information for <branch>. If no branch
>  	is specified it defaults to the current branch.
> 
>  --edit-description::
> @@ -300,24 +300,21 @@ superproject's "origin/main", but tracks the
> submodule's "origin/main".
>  	Only list branches whose tips are not reachable from the
>  	specified commit (HEAD if not specified). Implies `--list`.
> 
> -<branchname>::
> +<branch>::
>  	The name of the branch to create or delete.
>  	The new branch name must pass all checks defined by
>  	linkgit:git-check-ref-format[1].  Some of these checks
>  	may restrict the characters allowed in a branch name.
> +	If ommited, the current branch will be used instead.
> 
>  <start-point>::
>  	The new branch head will point to this commit.  It may be
>  	given as a branch name, a commit-id, or a tag.  If this
>  	option is omitted, the current HEAD will be used instead.
> 
> -<oldbranch>::
> -	The name of an existing branch.  If this option is omitted,
> -	the name of the current branch will be used instead.
> -
> -<newbranch>::
> -	The new name for an existing branch. The same restrictions as for
> -	<branchname> apply.
> +<new-branch>::
> +	The name for new branch. The same restrictions as for
> +	<branch> apply.
> 
>  --sort=<key>::
>  	Sort based on the key given. Prefix `-` to sort in descending