From: Phillip Wood Date: Wed, 23 Feb 2022 13:55:39 GMT Subject: Re: [PATCH 00/25] CI: run "make [test]" directly, use $GITHUB_ENV Message-ID: <4d3fecbf-23f9-f6b6-414e-8eaca620aced@gmail.com> In-Reply-To: Hi Ævar On 21/02/2022 14:46, Ævar Arnfjörð Bjarmason wrote: > [...] > == Details > > This series conflicts with and is a proposed alternative to Johannes's > proposed changes to teach "ci/lib.sh" GitHub specific syntax to > "group" certain parts of the output[2]. That series proposes to keep > the "ci/run-build-and-tests.sh" and similar scripts, but to teach them > to emit markers indicating when the "build" part commences, then > "test" etc. > > I think the approach offered here is better as elaborated on in > 12/25[1], especially because as Johannes notes[3] we only have one > level of "grouping" within a "step" available to us. In his version > using it for "build" v.s. "test" precludes being able to group parts > of that "build" or "test" output in the future. > > The following compares CI output between the three with a > change-on-top which caused a compilation error ("this" is this series, > "js" is Johannes's) when clicking on the "linux-gcc" failure: > > master: https://github.com/avar/git/runs/5274251909?check_suite_focus=true > this: https://github.com/avar/git/runs/5274464670?check_suite_focus=true > js: https://github.com/avar/git/runs/5272239403?check_suite_focus=true > > Here we went from 93 lines of output on "master" to 47 in "this" > (107 in "js"). Note also how in "this" we can: > > - Expand the "Run make" to get the "MAKEFLAGS" and other variables > used in the step. That's now a 3-line summary instead of the > first 50 lines being the old "ci/lib.sh" "set -x" output. > > - Because "make" failed, we have an elided "make test" step that's > not being run below. We can thus see what steps our failure caused > us to skip. > > - Unlike the "js" version we'll show the compilation error by > default (the "js" version is grouped and needs to be expanded), > but our output is now brief enough that that's no longer > surrounded by other irrelevant output. > > - Unlike the "js" version there is no "CI setup" group within each > step. That work is in the earlier "ci/lib.sh --build" step > instead, which sets the config for all subsequent steps. I can see that showing compilation errors without having to expand anything is useful but in my experience they are relatively rare compared to test failures. If I understand the rest of the message correctly we're left with having to expand print-test-failures and searching for "not ok" to find out what went wrong with this series. > For other output changes look at the difference between "master" and > "this" at: > > master: https://github.com/git/git/actions/runs/1866786595 > this: https://github.com/avar/git/actions/runs/1876270588 > > Not explicitly covered in the summary above is that various other > parts of ci/* were doing the same sort of within-step setup, but now > do so via cross-step passing of variables via $GITHUB_ENV. E.g. on > "master" the test slices for the Windows tests have a lot of verbosity > before they get to running the test itself: > > https://github.com/git/git/runs/5254267914?check_suite_focus=true#step:5:56 > > In the "js" version the test output is hidden ("grouped"), but we've > got the same amount of verbosity by default: > > https://github.com/gitgitgadget/git/runs/4937491771?check_suite_focus=true#step:5:67 > > Whereas in "this" version that verbosity is in the preceding "select > tests" step, with the "test" step showing only the relevant end-state > of the "$T" variable we'll use in the Makefile (hidden by default, > expanded in this link): > > https://github.com/avar/git/runs/5274558869?check_suite_focus=true#step:7:13 All I can see in the "$T" variable I have to scroll to get the prove output on screen > This series does not attempt to replace the use of the "group" output > used for the "ok" or "not ok" portion of tests in Johannes's > series. When a test fails the output in this series (sans config > discovery not being repeated, and now summarized in the $GITHUB_ENV > drop-down) is substantially the same as on "master". > > My summary at [4] goes into other overlap & non-overlap between the > two. I think using the "group" output for those purposes might be > useful, although I left some feedback on [5] with problems in the > current "js" implementation. > > I do think any such changes should follow behind this series, as doing > that sort of grouping once we can effectively free up an extra "group" > level (by peeling those off into "steps", as is done here) would be > much more useful. I can see the attraction of being able to use make directly in the ci from an implementation point of view but from the point of view of someone trying to investigate a test failure then unless I've misunderstood I don't think this series improves the current situation. Why can't you build on top of Dscho's series that makes it easier to see the output of the failed tests? Best Wishes Phillip > 1. https://lore.kernel.org/git/patch-12.25-dfd823f2e7d-20220221T122605Z-avarab@gmail.com > 2. https://lore.kernel.org/git/pull.1117.git.1643050574.gitgitgadget@gmail.com/ > 3. https://lore.kernel.org/git/9333ba781b8240f704e739b00d274f8c3d887e39.1643050574.git.gitgitgadget@gmail.com/ > 4. https://lore.kernel.org/git/220127.86ilu5cdnf.gmgdl@evledraar.gmail.com/ > 5. https://lore.kernel.org/git/220126.86sftbfjl4.gmgdl@evledraar.gmail.com/ > > Ævar Arnfjörð Bjarmason (25): > CI: run "set -ex" early in ci/lib.sh > CI: make "$jobname" explicit, remove fallback > CI: remove more dead Travis CI support > CI: remove dead "tree skipping" code > CI: remove unused Azure ci/* code > CI: don't have "git grep" invoke a pager in tree content check > CI: have "static-analysis" run a "make ci-static-analysis" target > CI: have "static-analysis" run "check-builtins", not "documentation" > CI: move p4 and git-lfs variables to ci/install-dependencies.sh > CI: consistently use "export" in ci/lib.sh > CI: export variables via a wrapper > CI: remove "run-build-and-tests.sh", run "make [test]" directly > CI: check ignored unignored build artifacts in "win[+VS] build" too > CI: invoke "make artifacts-tar" directly in windows-build > CI: split up and reduce "ci/test-documentation.sh" > CI: combine ci/install{,-docker}-dependencies.sh > CI: move "env" definitions into ci/lib.sh > ci/run-test-slice.sh: replace shelling out with "echo" > CI: pre-select test slice in Windows & VS tests > CI: only invoke ci/lib.sh as "steps" in main.yml > CI: narrow down variable definitions in --build and --test > CI: add more variables to MAKEFLAGS, except under vs-build > CI: stop over-setting the $CC variable > CI: set PYTHON_PATH setting for osx-{clang,gcc} into "$jobname" case > CI: don't use "set -x" in "ci/lib.sh" output > > .github/workflows/main.yml | 100 +++++--- > Makefile | 32 ++- > ci/check-directional-formatting.bash | 2 +- > ci/check-unignored-build-artifacts.sh | 20 ++ > ci/install-dependencies.sh | 53 ++++- > ci/install-docker-dependencies.sh | 22 -- > ci/lib-ci-type.sh | 10 + > ci/lib-tput.sh | 2 + > ci/lib.sh | 315 ++++++++++++-------------- > ci/make-test-artifacts.sh | 12 - > ci/mount-fileshare.sh | 25 -- > ci/print-test-failures.sh | 16 +- > ci/run-build-and-tests.sh | 54 ----- > ci/run-docker-build.sh | 66 ------ > ci/run-docker.sh | 47 ---- > ci/run-static-analysis.sh | 32 --- > ci/run-test-slice.sh | 17 -- > ci/select-test-slice.sh | 10 + > ci/test-documentation.sh | 37 +-- > ci/util/extract-trash-dirs.sh | 50 ---- > 20 files changed, 345 insertions(+), 577 deletions(-) > create mode 100755 ci/check-unignored-build-artifacts.sh > delete mode 100755 ci/install-docker-dependencies.sh > create mode 100644 ci/lib-ci-type.sh > create mode 100644 ci/lib-tput.sh > delete mode 100755 ci/make-test-artifacts.sh > delete mode 100755 ci/mount-fileshare.sh > delete mode 100755 ci/run-build-and-tests.sh > delete mode 100755 ci/run-docker-build.sh > delete mode 100755 ci/run-docker.sh > delete mode 100755 ci/run-static-analysis.sh > delete mode 100755 ci/run-test-slice.sh > create mode 100755 ci/select-test-slice.sh > delete mode 100755 ci/util/extract-trash-dirs.sh >