From: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Date: Tue, 06 Feb 2024 22:50:39 GMT
Subject: [PATCH v4 3/3] add -p tests: remove Perl prerequisite
Message-ID: <20240206225122.1095766-7-shyamthakkar001@gmail.com>
In-Reply-To: <20240203112619.979239-2-shyamthakkar001@gmail.com>

The Perl version of the add -i/-p commands has been removed since
20b813d (add: remove "add.interactive.useBuiltin" & Perl "git
add--interactive", 2023-02-07)

Therefore, Perl prerequisite in t2071-restore-patch and
t7105-reset-patch is not necessary.

Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
---
 t/t2071-restore-patch.sh | 26 +++++++++++++-------------
 t/t7105-reset-patch.sh   | 22 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/t/t2071-restore-patch.sh b/t/t2071-restore-patch.sh
index dbbefc188d..27e85be40a 100755
--- a/t/t2071-restore-patch.sh
+++ b/t/t2071-restore-patch.sh
@@ -4,7 +4,7 @@ test_description='git restore --patch'
 
 . ./lib-patch-mode.sh
 
-test_expect_success PERL 'setup' '
+test_expect_success 'setup' '
 	mkdir dir &&
 	echo parent >dir/foo &&
 	echo dummy >bar &&
@@ -16,28 +16,28 @@ test_expect_success PERL 'setup' '
 	save_head
 '
 
-test_expect_success PERL 'restore -p without pathspec is fine' '
+test_expect_success 'restore -p without pathspec is fine' '
 	echo q >cmd &&
 	git restore -p <cmd
 '
 
 # note: bar sorts before dir/foo, so the first 'n' is always to skip 'bar'
 
-test_expect_success PERL 'saying "n" does nothing' '
+test_expect_success 'saying "n" does nothing' '
 	set_and_save_state dir/foo work head &&
 	test_write_lines n n | git restore -p &&
 	verify_saved_state bar &&
 	verify_saved_state dir/foo
 '
 
-test_expect_success PERL 'git restore -p' '
+test_expect_success 'git restore -p' '
 	set_and_save_state dir/foo work head &&
 	test_write_lines n y | git restore -p &&
 	verify_saved_state bar &&
 	verify_state dir/foo head head
 '
 
-test_expect_success PERL 'git restore -p with staged changes' '
+test_expect_success 'git restore -p with staged changes' '
 	set_state dir/foo work index &&
 	test_write_lines n y | git restore -p &&
 	verify_saved_state bar &&
@@ -56,7 +56,7 @@ do
 	'
 done
 
-test_expect_success PERL 'git restore -p --source=HEAD^' '
+test_expect_success 'git restore -p --source=HEAD^' '
 	set_state dir/foo work index &&
 	# the third n is to get out in case it mistakenly does not apply
 	test_write_lines n y n | git restore -p --source=HEAD^ &&
@@ -64,7 +64,7 @@ test_expect_success PERL 'git restore -p --source=HEAD^' '
 	verify_state dir/foo parent index
 '
 
-test_expect_success PERL 'git restore -p --source=HEAD^...' '
+test_expect_success 'git restore -p --source=HEAD^...' '
 	set_state dir/foo work index &&
 	# the third n is to get out in case it mistakenly does not apply
 	test_write_lines n y n | git restore -p --source=HEAD^... &&
@@ -72,7 +72,7 @@ test_expect_success PERL 'git restore -p --source=HEAD^...' '
 	verify_state dir/foo parent index
 '
 
-test_expect_success PERL 'git restore -p handles deletion' '
+test_expect_success 'git restore -p handles deletion' '
 	set_state dir/foo work index &&
 	rm dir/foo &&
 	test_write_lines n y | git restore -p &&
@@ -85,21 +85,21 @@ test_expect_success PERL 'git restore -p handles deletion' '
 # dir/foo.  There's always an extra 'n' to reject edits to dir/foo in
 # the failure case (and thus get out of the loop).
 
-test_expect_success PERL 'path limiting works: dir' '
+test_expect_success 'path limiting works: dir' '
 	set_state dir/foo work head &&
 	test_write_lines y n | git restore -p dir &&
 	verify_saved_state bar &&
 	verify_state dir/foo head head
 '
 
-test_expect_success PERL 'path limiting works: -- dir' '
+test_expect_success 'path limiting works: -- dir' '
 	set_state dir/foo work head &&
 	test_write_lines y n | git restore -p -- dir &&
 	verify_saved_state bar &&
 	verify_state dir/foo head head
 '
 
-test_expect_success PERL 'path limiting works: HEAD^ -- dir' '
+test_expect_success 'path limiting works: HEAD^ -- dir' '
 	set_state dir/foo work head &&
 	# the third n is to get out in case it mistakenly does not apply
 	test_write_lines y n n | git restore -p --source=HEAD^ -- dir &&
@@ -107,7 +107,7 @@ test_expect_success PERL 'path limiting works: HEAD^ -- dir' '
 	verify_state dir/foo parent head
 '
 
-test_expect_success PERL 'path limiting works: foo inside dir' '
+test_expect_success 'path limiting works: foo inside dir' '
 	set_state dir/foo work head &&
 	# the third n is to get out in case it mistakenly does not apply
 	test_write_lines y n n | (cd dir && git restore -p foo) &&
@@ -115,7 +115,7 @@ test_expect_success PERL 'path limiting works: foo inside dir' '
 	verify_state dir/foo head head
 '
 
-test_expect_success PERL 'none of this moved HEAD' '
+test_expect_success 'none of this moved HEAD' '
 	verify_saved_head
 '
 
diff --git a/t/t7105-reset-patch.sh b/t/t7105-reset-patch.sh
index 7147148138..3691b94d1b 100755
--- a/t/t7105-reset-patch.sh
+++ b/t/t7105-reset-patch.sh
@@ -5,7 +5,7 @@ test_description='git reset --patch'
 TEST_PASSES_SANITIZE_LEAK=true
 . ./lib-patch-mode.sh
 
-test_expect_success PERL 'setup' '
+test_expect_success 'setup' '
 	mkdir dir &&
 	echo parent > dir/foo &&
 	echo dummy > bar &&
@@ -19,14 +19,14 @@ test_expect_success PERL 'setup' '
 
 # note: bar sorts before foo, so the first 'n' is always to skip 'bar'
 
-test_expect_success PERL 'saying "n" does nothing' '
+test_expect_success 'saying "n" does nothing' '
 	set_and_save_state dir/foo work work &&
 	test_write_lines n n | git reset -p &&
 	verify_saved_state dir/foo &&
 	verify_saved_state bar
 '
 
-test_expect_success PERL 'git reset -p' '
+test_expect_success 'git reset -p' '
 	test_write_lines n y | git reset -p >output &&
 	verify_state dir/foo work head &&
 	verify_saved_state bar &&
@@ -43,28 +43,28 @@ do
 	'
 done
 
-test_expect_success PERL 'git reset -p HEAD^' '
+test_expect_success 'git reset -p HEAD^' '
 	test_write_lines n y | git reset -p HEAD^ >output &&
 	verify_state dir/foo work parent &&
 	verify_saved_state bar &&
 	test_grep "Apply" output
 '
 
-test_expect_success PERL 'git reset -p HEAD^^{tree}' '
+test_expect_success 'git reset -p HEAD^^{tree}' '
 	test_write_lines n y | git reset -p HEAD^^{tree} >output &&
 	verify_state dir/foo work parent &&
 	verify_saved_state bar &&
 	test_grep "Apply" output
 '
 
-test_expect_success PERL 'git reset -p HEAD^:dir/foo (blob fails)' '
+test_expect_success 'git reset -p HEAD^:dir/foo (blob fails)' '
 	set_and_save_state dir/foo work work &&
 	test_must_fail git reset -p HEAD^:dir/foo &&
 	verify_saved_state dir/foo &&
 	verify_saved_state bar
 '
 
-test_expect_success PERL 'git reset -p aaaaaaaa (unknown fails)' '
+test_expect_success 'git reset -p aaaaaaaa (unknown fails)' '
 	set_and_save_state dir/foo work work &&
 	test_must_fail git reset -p aaaaaaaa &&
 	verify_saved_state dir/foo &&
@@ -76,27 +76,27 @@ test_expect_success PERL 'git reset -p aaaaaaaa (unknown fails)' '
 # dir/foo.  There's always an extra 'n' to reject edits to dir/foo in
 # the failure case (and thus get out of the loop).
 
-test_expect_success PERL 'git reset -p dir' '
+test_expect_success 'git reset -p dir' '
 	set_state dir/foo work work &&
 	test_write_lines y n | git reset -p dir &&
 	verify_state dir/foo work head &&
 	verify_saved_state bar
 '
 
-test_expect_success PERL 'git reset -p -- foo (inside dir)' '
+test_expect_success 'git reset -p -- foo (inside dir)' '
 	set_state dir/foo work work &&
 	test_write_lines y n | (cd dir && git reset -p -- foo) &&
 	verify_state dir/foo work head &&
 	verify_saved_state bar
 '
 
-test_expect_success PERL 'git reset -p HEAD^ -- dir' '
+test_expect_success 'git reset -p HEAD^ -- dir' '
 	test_write_lines y n | git reset -p HEAD^ -- dir &&
 	verify_state dir/foo work parent &&
 	verify_saved_state bar
 '
 
-test_expect_success PERL 'none of this moved HEAD' '
+test_expect_success 'none of this moved HEAD' '
 	verify_saved_head
 '
 
-- 
2.43.0