{"thread":{"id":"31737","subject":"Fw: How do I git-push to an FTP server?","startedAt":"2012-10-05T13:38:33Z","lastAt":"2012-10-08T21:38:28Z","messageCount":14,"participants":["Konstantin Khomoutov","Philippe Vaucher","Thomas Ferris Nicolaisen","Junio C Hamano","Ramkumar Ramachandra","Jonathan Nieder"],"isPatch":false,"patchVersion":null,"patchTotal":null},"messages":[{"id":"200624","messageId":"20121005173833.e96c4fcfed0cce5b78911b0b@domain007.com","threadId":"31737","inReplyTo":null,"subject":"Fw: How do I git-push to an FTP server?","fromName":"Konstantin Khomoutov","fromEmail":"flatworm-rn4veauk+akrv+lv9mx5uipxlwaovq5f@public.gmane.org","sentAt":"2012-10-05T13:38:33Z","receivedAt":"2012-10-05T13:38:33Z","isPatch":false,"sender":{"key":"flatworm-rn4veauk+akrv+lv9mx5uipxlwaovq5f@public.gmane.org","avatar":null},"body":"On the git-users mailing list we're trying someone to help with\nrunning `git push` over FTP. That person is runnig Git 1.7.9.5\non Ubuntu 12.04.\n\nBelow is the trace captured while trying to perform such a faulty push.\nThe oddity (in my eyes) is that after uploading the files, Git executes\n`git http-push` which manual page does not mention FTP at all.\n\nSo I'd like to ask experts on Git transports for any advice in this\nsituation.\n\nBegin forwarded message:\n\nDate: Fri, 5 Oct 2012 05:07:24 -0700 (PDT)\nFrom: August Karlstrom \nTo: git...-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\nCc: August Karlstrom \nSubject: Re: [git-users] How do I git-push to an FTP server?\n\nDen fredagen den 5:e oktober 2012 kl. 11:38:43 UTC+2 skrev Konstantin \nKhomoutov:\n>\n> On Fri, 5 Oct 2012 01:24:21 -0700 (PDT) \n> August Karlstrom > wrote: \n>\n> > I get the following error when I run `git push' in a repository \n> > called test: \n> > \n> > error: Cannot access URL ftp://my-ftp-server/git/test.git/, return \n> > code 3 fatal: git-http-push failed \n> > \n> > This is after having successfully cloned the repository from the \n> > address above. \n> Try to run your command while having set GIT_TRACE=1 and \n> GIT_CURL_VERBOSE=1, like \n>\n> $ GIT_TRACE=1 GIT_CURL_VERBOSE=1 git push \n>\n> and post the results here (if you will fail to infer the cause from\n> its output by yourself). \n>\n\nThanks for the input, Konstantin. Below is the output (with identifying \ninfo removed). I can't see what caused \"Uploading to a URL without a\nfile name\" at the end.\n\n$ GIT_TRACE=1 GIT_CURL_VERBOSE=1 git push\ntrace: built-in: git 'push'\ntrace: run_command: 'git-remote-ftp' 'origin' \n'ftp://my-ftp-server/git/test.git'\n* About to connect() to my-ftp-server port 21 (#0)\n* Trying my-ftp-ip... * Connected to my-ftp-server (my-ftp-ip) port\n21 (#0)\n< 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- \n< 220-You are user number 6 of 400 allowed. \n< 220-Local time is now 11:23. Server port: 21. \n< 220-This is a private system - No anonymous login \n< 220 You will be disconnected after 15 minutes of inactivity. \n> USER my-username \n< 331 User my-username OK. Password required \n> PASS my-password \n< 230-User my-username has group access to: my-group \n< 230 OK. Current restricted directory is / \n> PWD \n< 257 \"/\" is your current location \n* Entry path is '/'\n> CWD git \n< 250 OK. Current directory is /git \n> CWD test.git \n< 250 OK. Current directory is /git/test.git \n> CWD info \n< 250 OK. Current directory is /git/test.git/info \n> EPSV \n* Connect data stream passively\n< 500 Unknown command \n* disabling EPSV usage\n> PASV \n< 227 Entering Passive Mode ([not shown]) \n* Trying my-ftp-ip... * Connecting to my-ftp-ip (my-ftp-ip) port 63983\n> TYPE I \n< 200 TYPE is now 8-bit binary \n> SIZE refs \n< 213 59 \n> RETR refs \n< 150 Accepted data connection \n* Maxdownload = -1\n* Getting file with size: 59\n* Remembering we are in dir \"git/test.git/info/\"\n< 226-File successfully transferred \n< 226 0.000 seconds (measured here), 1.34 Mbytes per second \n* Connection #0 to host my-ftp-server left intact\n* Re-using existing connection! (#0) with host my-ftp-server\n* Connected to my-ftp-server (my-ftp-ip) port 21 (#0)\n> CWD / \n< 250 OK. Current directory is / \n> CWD git \n< 250 OK. Current directory is /git \n> CWD test.git \n< 250 OK. Current directory is /git/test.git \n> PASV \n* Connect data stream passively\n< 227 Entering Passive Mode ([not shown]) \n* Trying my-ftp-ip... * Connecting to my-ftp-ip (my-ftp-ip) port 63462\n> SIZE HEAD \n< 213 23 \n> RETR HEAD \n< 150 Accepted data connection \n* Maxdownload = -1\n* Getting file with size: 23\n* Remembering we are in dir \"git/test.git/\"\n< 226-File successfully transferred \n< 226 0.000 seconds (measured here), 0.63 Mbytes per second \n* Connection #0 to host my-ftp-server left intact\ntrace: run_command: 'http-push' '--helper-status' \n'ftp://my-ftp-server/git/test.git/'\n'refs/heads/master:refs/heads/master' trace: exec: 'git' 'http-push'\n'--helper-status' 'ftp://my-ftp-server/git/test.git/'\n'refs/heads/master:refs/heads/master' trace: exec: 'git-http-push'\n'--helper-status' 'ftp://my-ftp-server/git/test.git/'\n'refs/heads/master:refs/heads/master' trace: run_command:\n'git-http-push' '--helper-status' 'ftp://my-ftp-server/git/test.git/'\n'refs/heads/master:refs/heads/master'\n* About to connect() to my-ftp-server port 21 (#0)\n* Trying my-ftp-ip... * Connected to my-ftp-server (my-ftp-ip) port\n21 (#0)\n< 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- \n< 220-You are user number 7 of 400 allowed. \n< 220-Local time is now 11:23. Server port: 21. \n< 220-This is a private system - No anonymous login \n< 220 You will be disconnected after 15 minutes of inactivity. \n> USER my-username \n< 331 User my-username OK. Password required \n> PASS my-password \n< 230-User my-username has group access to: my-group \n< 230 OK. Current restricted directory is / \n> PWD \n< 257 \"/\" is your current location \n* Entry path is '/'\n* Uploading to a URL without a file name!\n* Closing connection #0\nerror: Cannot access URL ftp://my-ftp-server/git/test.git/, return code\n3 fatal: git-http-push failed\n\n-- \nYou received this message because you are subscribed to the Google\nGroups \"Git for human beings\" group. To view this discussion on the web\nvisit https://groups.google.com/d/msg/git-users/-/n_i8DslaCr8J. To post\nto this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org To unsubscribe\nfrom this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at\nhttp://groups.google.com/group/git-users?hl=en.\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200625","messageId":"CAGK7Mr4L0Us3ykLUoWBdyR2zJUNa_HNguwb-=dEq_h_yXThPPA@mail.gmail.com","threadId":"31737","inReplyTo":"20121005173833.e96c4fcfed0cce5b78911b0b@domain007.com","subject":"Re: Fw: [git-users] How do I git-push to an FTP server?","fromName":"Philippe Vaucher","fromEmail":"philippe.vaucher@gmail.com","sentAt":"2012-10-05T13:46:33Z","receivedAt":"2012-10-05T13:46:33Z","isPatch":false,"sender":{"key":"philippe.vaucher@gmail.com","avatar":null},"body":"> On the git-users mailing list we're trying someone to help with\n> running `git push` over FTP. That person is runnig Git 1.7.9.5\n> on Ubuntu 12.04.\n\nI don't think vanilla git supports pushing over ftp.\n\nThere are plugins like https://github.com/resmo/git-ftp tho.\n\nPhilippe\n"},{"id":"200628","messageId":"CAEcj5uW4aw19MgNi8vJk5TWoL6SEad=s2jthS-h1jLTtuPq7AQ@mail.gmail.com","threadId":"31737","inReplyTo":"CAGK7Mr4L0Us3ykLUoWBdyR2zJUNa_HNguwb-=dEq_h_yXThPPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Thomas Ferris Nicolaisen","fromEmail":"tfnico-re5jqeeqqe8avxtiumwx3w@public.gmane.org","sentAt":"2012-10-05T15:21:26Z","receivedAt":"2012-10-05T15:21:26Z","isPatch":false,"sender":{"key":"tfnico-re5jqeeqqe8avxtiumwx3w@public.gmane.org","avatar":null},"body":"On Fri, Oct 5, 2012 at 3:46 PM, Philippe Vaucher\n wrote:\n>\n> > On the git-users mailing list we're trying someone to help with\n> > running `git push` over FTP. That person is runnig Git 1.7.9.5\n> > on Ubuntu 12.04.\n>\n> I don't think vanilla git supports pushing over ftp.\n>\n\nAt least according to the documentation[1], \"Git natively supports [...] ftp\".\n\nThis could need some clarification if pushing over ftp is not supported.\n\n[1] http://www.kernel.org/pub/software/scm/git/docs/git-push.html#URLS\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200632","messageId":"20121005213810.28199bf3504fd64b87d0bf6e@domain007.com","threadId":"31737","inReplyTo":"CAGK7Mr4L0Us3ykLUoWBdyR2zJUNa_HNguwb-=dEq_h_yXThPPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Konstantin Khomoutov","fromEmail":"flatworm-rn4veauk+akrv+lv9mx5uipxlwaovq5f@public.gmane.org","sentAt":"2012-10-05T17:38:10Z","receivedAt":"2012-10-05T17:38:10Z","isPatch":false,"sender":{"key":"flatworm-rn4veauk+akrv+lv9mx5uipxlwaovq5f@public.gmane.org","avatar":null},"body":"On Fri, 5 Oct 2012 15:46:33 +0200\nPhilippe Vaucher wrote:\n\n> > On the git-users mailing list we're trying someone to help with\n> > running `git push` over FTP. That person is runnig Git 1.7.9.5\n> > on Ubuntu 12.04.\n> \n> I don't think vanilla git supports pushing over ftp.\n> \n> There are plugins like https://github.com/resmo/git-ftp tho.\n\ngit-ftp's functionality is completely orthogonal to `git push` -- this\nscript allows to sync a tree referenced by the specified Git commit\nwith a remote directory accessible via FTP, transferring only\nnew and modified files and deleting disappeared files and directories.\nIOW, git-ftp is a (very handy) Git-powered *deployment* tool, not a\nbackend for `git push` or something like that.\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200642","messageId":"7vwqz4si87.fsf@alter.siamese.dyndns.org","threadId":"31737","inReplyTo":"CAEcj5uW4aw19MgNi8vJk5TWoL6SEad=s2jthS-h1jLTtuPq7AQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Junio C Hamano","fromEmail":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","sentAt":"2012-10-05T21:48:40Z","receivedAt":"2012-10-05T21:48:40Z","isPatch":false,"sender":{"key":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","avatar":null},"body":"Thomas Ferris Nicolaisen writes:\n\n> On Fri, Oct 5, 2012 at 3:46 PM, Philippe Vaucher\n> wrote:\n>>\n>> > On the git-users mailing list we're trying someone to help with\n>> > running `git push` over FTP. That person is runnig Git 1.7.9.5\n>> > on Ubuntu 12.04.\n>>\n>> I don't think vanilla git supports pushing over ftp.\n>>\n>\n> At least according to the documentation[1], \"Git natively supports [...] ftp\".\n>\n> This could need some clarification if pushing over ftp is not supported.\n\nThe commit 5ce4f4e (Documentation/urls: Rewrite to accomodate\n::
, 2010-04-06) that came from\n\n http://thread.gmane.org/gmane.comp.version-control.git/145196/focus=145205\n\nwas supposed to be just a clarification of the document, but it\nadded ftp to the list without justification. Its earlier round is\nthis\n\n http://thread.gmane.org/gmane.comp.version-control.git/143499\n\nand it did not mention ftp; I wonder why we missed this addition\nduring the review process.\n\nThe ftp transport might have worked for fetching in the distant past\nfor \"dumb and slow\" commit walking fetches, but it was never\nsupposed to work with any kind of pushes as far as I know. I\nwouldn't be surprised if the dumb and slow commit walking fetch no\nlonger works with ftp.\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200699","messageId":"CALkWK0kXH-U0mTeFtiMq7tqCOpNJT1A7Z==GxOphe-sGdmxRRg@mail.gmail.com","threadId":"31737","inReplyTo":"7vwqz4si87.fsf@alter.siamese.dyndns.org","subject":"Re: Fw: [git-users] How do I git-push to an FTP server?","fromName":"Ramkumar Ramachandra","fromEmail":"artagnon@gmail.com","sentAt":"2012-10-07T15:28:26Z","receivedAt":"2012-10-07T15:28:26Z","isPatch":false,"sender":{"key":"r@artagnon.com","avatar":"https://avatars.githubusercontent.com/u/37226?v=4"},"body":"Junio C Hamano wrote:\n> Thomas Ferris Nicolaisen writes:\n>\n>> On Fri, Oct 5, 2012 at 3:46 PM, Philippe Vaucher\n>> wrote:\n>>>\n>>> > On the git-users mailing list we're trying someone to help with\n>>> > running `git push` over FTP. That person is runnig Git 1.7.9.5\n>>> > on Ubuntu 12.04.\n>>>\n>>> I don't think vanilla git supports pushing over ftp.\n>>>\n>>\n>> At least according to the documentation[1], \"Git natively supports [...] ftp\".\n>>\n>> This could need some clarification if pushing over ftp is not supported.\n>\n> The commit 5ce4f4e (Documentation/urls: Rewrite to accomodate\n> ::
, 2010-04-06) that came from\n>\n> http://thread.gmane.org/gmane.comp.version-control.git/145196/focus=145205\n>\n> was supposed to be just a clarification of the document, but it\n> added ftp to the list without justification.\n\nHm, my bad. Would this fix the problem?\n\n-- 8< --\nFrom: Ramkumar Ramachandra \nDate: Sun, 7 Oct 2012 20:57:15 +0530\nSubject: [PATCH] Documentation/urls: git does not natively support ftp\n\n5ce4f4e (Documentation/urls: Rewrite to accomodate\n::
, 2010-04-06) added ftp[s] to the list of\nsupported protocols without justification. Fix this.\n\nSigned-off-by: Ramkumar Ramachandra \n---\n Documentation/urls.txt | 5 ++---\n 1 file changed, 2 insertions(+), 3 deletions(-)\n\ndiff --git a/Documentation/urls.txt b/Documentation/urls.txt\nindex 2890194..a65e894 100644\n--- a/Documentation/urls.txt\n+++ b/Documentation/urls.txt\n@@ -6,13 +6,12 @@ address of the remote server, and the path to the repository.\n Depending on the transport protocol, some of this information may be\n absent.\n\n-Git natively supports ssh, git, http, https, ftp, ftps, and rsync\n-protocols. The following syntaxes may be used with them:\n+Git natively supports ssh, git, http, https, and rsync protocols. The\n+following syntaxes may be used with them:\n\n - ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/\n - git://host.xz{startsb}:port{endsb}/path/to/repo.git/\n - http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/\n-- ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/\n - rsync://host.xz/path/to/repo.git/\n\n An alternative scp-like syntax may also be used with the ssh protocol:\n-- \n1.7.12.1.428.g652398a.dirty\n"},{"id":"200702","messageId":"20121007172754.GA29560@elie.Belkin","threadId":"31737","inReplyTo":"CALkWK0kXH-U0mTeFtiMq7tqCOpNJT1A7Z==GxOphe-sGdmxRRg@mail.gmail.com","subject":"Re: Fw: [git-users] How do I git-push to an FTP server?","fromName":"Jonathan Nieder","fromEmail":"jrnieder@gmail.com","sentAt":"2012-10-07T17:27:54Z","receivedAt":"2012-10-07T17:27:54Z","isPatch":false,"sender":{"key":"jrnieder@gmail.com","avatar":"https://avatars.githubusercontent.com/u/281595?v=4"},"body":"Ramkumar Ramachandra wrote:\n>> Thomas Ferris Nicolaisen writes:\n\n>>> At least according to the documentation[1], \"Git natively supports [...] ftp\".\n>>>\n>>> This could need some clarification if pushing over ftp is not supported.\n[...]\n> -Git natively supports ssh, git, http, https, ftp, ftps, and rsync\n> -protocols. The following syntaxes may be used with them:\n> +Git natively supports ssh, git, http, https, and rsync protocols. The\n> +following syntaxes may be used with them:\n\nPerhaps the initial list should not be exhaustive, in which case we\ncould say:\n\n\tGit natively supports ssh, git, http, and https protocols. The\n\tfollowing syntaxes may be used with them:\n\n\t...\n\n\tGit also has (less efficient) support for fetching and pushing\n\tover rsync protocol and fetching over ftp or ftps, using the\n\tsame \"protocol://host/path/to/repo.git/\" syntax.\n"},{"id":"200711","messageId":"7vvcemovrh.fsf@alter.siamese.dyndns.org","threadId":"31737","inReplyTo":"20121007172754.GA29560-fcEM2ccDkbL2nhBuCrrZHw@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Junio C Hamano","fromEmail":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","sentAt":"2012-10-07T20:46:42Z","receivedAt":"2012-10-07T20:46:42Z","isPatch":false,"sender":{"key":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","avatar":null},"body":"Jonathan Nieder writes:\n\n> Ramkumar Ramachandra wrote:\n>>> Thomas Ferris Nicolaisen writes:\n>\n>>>> At least according to the documentation[1], \"Git natively supports [...] ftp\".\n>>>>\n>>>> This could need some clarification if pushing over ftp is not supported.\n> [...]\n>> -Git natively supports ssh, git, http, https, ftp, ftps, and rsync\n>> -protocols. The following syntaxes may be used with them:\n>> +Git natively supports ssh, git, http, https, and rsync protocols. The\n>> +following syntaxes may be used with them:\n>\n> Perhaps the initial list should not be exhaustive, in which case we\n> could say:\n>\n> \tGit natively supports ssh, git, http, and https protocols. The\n> \tfollowing syntaxes may be used with them:\n>\n> \t...\n>\n> \tGit also has (less efficient) support for fetching and pushing\n> \tover rsync protocol and fetching over ftp or ftps, using the\n> \tsame \"protocol://host/path/to/repo.git/\" syntax.\n\nYeah, that, possibly with \"These are deprecated; do not use them.\",\nwould be a better way forward. As we deprecated \"rsync\" long time\nago, perhaps we should remove it at Git 2.0 or somewhere around\nthat.\n\nBy the way, that old patch by Ram in question was *not* incorrect\nper-se back then when dumb http was still more prevalent option\nbetween the two http transports. Fetching over dumb http and dumb\nftp were both equally bad ;-) It just has become less relevant as\nmore people start equating http with the smart http, where there is\nno equivalent \"smart ftp\".\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200739","messageId":"CALkWK0nSxBsiE5_BZ67dPrwDRQSipL0LBR9Pf252iqL21HwZBA@mail.gmail.com","threadId":"31737","inReplyTo":"7vvcemovrh.fsf@alter.siamese.dyndns.org","subject":"Re: Fw: [git-users] How do I git-push to an FTP server?","fromName":"Ramkumar Ramachandra","fromEmail":"artagnon@gmail.com","sentAt":"2012-10-08T07:23:18Z","receivedAt":"2012-10-08T07:23:18Z","isPatch":false,"sender":{"key":"r@artagnon.com","avatar":"https://avatars.githubusercontent.com/u/37226?v=4"},"body":"Junio C Hamano wrote:\n> Jonathan Nieder writes:\n>\n>> Ramkumar Ramachandra wrote:\n>>>> Thomas Ferris Nicolaisen writes:\n>>\n>>>>> At least according to the documentation[1], \"Git natively supports [...] ftp\".\n>>>>>\n>>>>> This could need some clarification if pushing over ftp is not supported.\n>> [...]\n>>> -Git natively supports ssh, git, http, https, ftp, ftps, and rsync\n>>> -protocols. The following syntaxes may be used with them:\n>>> +Git natively supports ssh, git, http, https, and rsync protocols. The\n>>> +following syntaxes may be used with them:\n>>\n>> Perhaps the initial list should not be exhaustive, in which case we\n>> could say:\n>>\n>> Git natively supports ssh, git, http, and https protocols. The\n>> following syntaxes may be used with them:\n>>\n>> ...\n>>\n>> Git also has (less efficient) support for fetching and pushing\n>> over rsync protocol and fetching over ftp or ftps, using the\n>> same \"protocol://host/path/to/repo.git/\" syntax.\n>\n> Yeah, that, possibly with \"These are deprecated; do not use them.\",\n> would be a better way forward. As we deprecated \"rsync\" long time\n> ago, perhaps we should remove it at Git 2.0 or somewhere around\n> that.\n\nI see. Will we remove ftp[s] support too? I hope this is in order.\n\n-- 8< --\nFrom: Ramkumar Ramachandra \nDate: Sun, 7 Oct 2012 20:57:15 +0530\nSubject: [PATCH] Documentation/urls: mark rsync and ftp[s] as deprecated\n\nFetching and pushing over rsync, and fetching over ftp or ftps are\ndeprecated, and will soon be removed. Add a note saying this.\n\nHelped-by: Jonathan Nieder \nSigned-off-by: Ramkumar Ramachandra \n---\n Documentation/urls.txt | 11 +++++++----\n 1 file changed, 7 insertions(+), 4 deletions(-)\n\ndiff --git a/Documentation/urls.txt b/Documentation/urls.txt\nindex 2890194..653b61c 100644\n--- a/Documentation/urls.txt\n+++ b/Documentation/urls.txt\n@@ -6,14 +6,12 @@ address of the remote server, and the path to the repository.\n Depending on the transport protocol, some of this information may be\n absent.\n\n-Git natively supports ssh, git, http, https, ftp, ftps, and rsync\n-protocols. The following syntaxes may be used with them:\n+Git natively supports ssh, git, http, and https protocols. The\n+following syntaxes may be used with them:\n\n - ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/\n - git://host.xz{startsb}:port{endsb}/path/to/repo.git/\n - http{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/\n-- ftp{startsb}s{endsb}://host.xz{startsb}:port{endsb}/path/to/repo.git/\n-- rsync://host.xz/path/to/repo.git/\n\n An alternative scp-like syntax may also be used with the ssh protocol:\n\n@@ -31,6 +29,11 @@ syntaxes may be used:\n - /path/to/repo.git/\n - file:///path/to/repo.git/\n\n+ Git also has (less efficient) support for fetching and pushing over\n+ rsync protocol and fetching over ftp or ftps, using the same\n+ \"protocol://host/path/to/repo.git/\" syntax. However, these are\n+ deprecated, and will soon be removed.\n+\n ifndef::git-clone[]\n These two syntaxes are mostly equivalent, except when cloning, when\n the former implies --local option. See linkgit:git-clone[1] for\n-- \n1.7.12.1.428.g652398a.dirty\n"},{"id":"200741","messageId":"20121008080208.GC19733@elie.Belkin","threadId":"31737","inReplyTo":"CALkWK0nSxBsiE5_BZ67dPrwDRQSipL0LBR9Pf252iqL21HwZBA@mail.gmail.com","subject":"Re: Fw: [git-users] How do I git-push to an FTP server?","fromName":"Jonathan Nieder","fromEmail":"jrnieder@gmail.com","sentAt":"2012-10-08T08:02:08Z","receivedAt":"2012-10-08T08:02:08Z","isPatch":false,"sender":{"key":"jrnieder@gmail.com","avatar":"https://avatars.githubusercontent.com/u/281595?v=4"},"body":"Ramkumar Ramachandra wrote:\n\n> I see. Will we remove ftp[s] support too? I hope this is in order.\n\nI don't see why that would be desirable, as long as libcurl continues\nto support it for free.\n\n[...]\n> Fetching and pushing over rsync, and fetching over ftp or ftps are\n> deprecated, and will soon be removed. Add a note saying this.\n\nI thought the real rationale was to avoid creating the illusion of\nsupporting push over ftp. Having a paper trail to comfort people who\nnotice when rsync support vanishes is just an added bonus.\n\n[...]\n> @@ -31,6 +29,11 @@ syntaxes may be used:\n> - /path/to/repo.git/\n> - file:///path/to/repo.git/\n> \n> + Git also has (less efficient) support for fetching and pushing over\n> + rsync protocol and fetching over ftp or ftps, using the same\n> + \"protocol://host/path/to/repo.git/\" syntax. However, these are\n> + deprecated, and will soon be removed.\n\nI'd suggest dropping \", and will soon be removed.\" or replacing it\nwith \". Don't use them.\" to avoid the question of how soon \"soon\" is.\n\nWith that change and with a clearer commit message, this will probably\nbe good to go imho.\n\nThanks,\nJonathan\n"},{"id":"200749","messageId":"7v7gr1nfby.fsf@alter.siamese.dyndns.org","threadId":"31737","inReplyTo":"20121008080208.GC19733-fcEM2ccDkbL2nhBuCrrZHw@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Junio C Hamano","fromEmail":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","sentAt":"2012-10-08T15:39:13Z","receivedAt":"2012-10-08T15:39:13Z","isPatch":false,"sender":{"key":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","avatar":null},"body":"Jonathan Nieder writes:\n\n> I'd suggest dropping \", and will soon be removed.\" or replacing it\n> with \". Don't use them.\" to avoid the question of how soon \"soon\" is.\n>\n> With that change and with a clearer commit message, this will probably\n> be good to go imho.\n\nYup; thanks.\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200761","messageId":"7vzk3wlvs2.fsf@alter.siamese.dyndns.org","threadId":"31737","inReplyTo":"7v7gr1nfby.fsf-s2KvWo2KEQL18tm6hw+yZpy9Z0UEorGK@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Junio C Hamano","fromEmail":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","sentAt":"2012-10-08T17:26:53Z","receivedAt":"2012-10-08T17:26:53Z","isPatch":false,"sender":{"key":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","avatar":null},"body":"Junio C Hamano writes:\n\n> Jonathan Nieder writes:\n>\n>> I'd suggest dropping \", and will soon be removed.\" or replacing it\n>> with \". Don't use them.\" to avoid the question of how soon \"soon\" is.\n>>\n>> With that change and with a clearer commit message, this will probably\n>> be good to go imho.\n>\n> Yup; thanks.\n\nLet's do this, then.\n\n-- >8 --\nFrom: Ramkumar Ramachandra \nSubject: Git url doc: mark ftp/ftps as read-only and deprecate them\n\nIt is not even worth mentioning their removal; just discourage\npeople from using them.\n\nSigned-off-by: Ramkumar Ramachandra \nHelped-by: Jonathan Nieder \nSigned-off-by: Junio C Hamano \n---\n Documentation/urls.txt | 8 ++++++--\n 1 file changed, 6 insertions(+), 2 deletions(-)\n\ndiff --git i/Documentation/urls.txt w/Documentation/urls.txt\nindex 2890194..1d15ee7 100644\n--- i/Documentation/urls.txt\n+++ w/Documentation/urls.txt\n@@ -6,8 +6,12 @@ address of the remote server, and the path to the repository.\n Depending on the transport protocol, some of this information may be\n absent.\n \n-Git natively supports ssh, git, http, https, ftp, ftps, and rsync\n-protocols. The following syntaxes may be used with them:\n+Git supports ssh, git, http, and https protocols (in addition, ftp,\n+and ftps can be used for fetching and rsync can be used for fetching\n+and pushing, but these are inefficient and deprecated; do not use\n+them).\n+\n+The following syntaxes may be used with them:\n \n - ssh://{startsb}user@{endsb}host.xz{startsb}:port{endsb}/path/to/repo.git/\n - git://host.xz{startsb}:port{endsb}/path/to/repo.git/\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"},{"id":"200786","messageId":"20121008201816.GB7698@elie.Belkin","threadId":"31737","inReplyTo":"7vzk3wlvs2.fsf@alter.siamese.dyndns.org","subject":"Re: Fw: [git-users] How do I git-push to an FTP server?","fromName":"Jonathan Nieder","fromEmail":"jrnieder@gmail.com","sentAt":"2012-10-08T20:18:16Z","receivedAt":"2012-10-08T20:18:16Z","isPatch":false,"sender":{"key":"jrnieder@gmail.com","avatar":"https://avatars.githubusercontent.com/u/281595?v=4"},"body":"Junio C Hamano wrote:\n\n> Let's do this, then.\n\nI think it would be nicer to start with the important info (git\nsupports ssh, git, http, https) and deal with less important parts\nlike rsync support later in the document, but this looks like a good\nminimal fix. Thanks for pushing it to completion.\n\nFor what it's worth,\nReviewed-by: Jonathan Nieder \n"},{"id":"200792","messageId":"7vy5jgiqzv.fsf@alter.siamese.dyndns.org","threadId":"31737","inReplyTo":"20121008201816.GB7698-fcEM2ccDkbL2nhBuCrrZHw@public.gmane.org","subject":"Re: Fw: How do I git-push to an FTP server?","fromName":"Junio C Hamano","fromEmail":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","sentAt":"2012-10-08T21:38:28Z","receivedAt":"2012-10-08T21:38:28Z","isPatch":false,"sender":{"key":"gitster-e+axbwqsrlaavxtiumwx3w@public.gmane.org","avatar":null},"body":"Thanks.\n\n-- \nYou received this message because you are subscribed to the Google Groups \"Git for human beings\" group.\nTo post to this group, send email to git-users-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nTo unsubscribe from this group, send email to git-users+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org\nFor more options, visit this group at http://groups.google.com/group/git-users?hl=en.\n"}]}